I can not load a recent project

Similar Questions

• I am trying to upgrade my XP to Windows 7. I bought a licensed copy of Windows 7 with SP1 dvd but it's a udf file and I can not load.

  I am trying to upgrade my XP to Windows 7.  I bought a licensed copy of Windows 7 with SP1 dvd but it's a udf file and I can not load.  What should I do?

  Boot you from the DVD first? Or have you tried to open it in Windows Xp?

• I can not load a new copy of Windows Live ID Sign-in Assistant (XP)

  I have problems with youtube and they say to reload ie 8, I did.  Now Windows sign-in Assistant does not work and I can not load another copy.  Everything is for Windows 7.

  Help.

  Hello

  The question you have posted is related to Windows Live, and would be better suited in the Windows Live forum. Please visit the link below to find a community that will provide the support you want. http://windowslivehelp.com/

• SanDisk Fuze has a problem (cannot recognize on computer, can not load)

  
  

  If you can not load, it's a fault of connecting cable, connector of the rocket or the USB port on your computer.

• I can not load a CD rom. I get the error message is that the CD rom is 16-bit and my Vista 64 Bit.__What are solutions to make this readable CD Rom in my system.

  I can not load a CD rom.  I get the error message is that the CD rom is 16 bits and my Vista 64-bit.
  What are the solutions to make this readable CD Rom in my system.

  It seems that if the CD is read correctly, but if I interpret your message right, you have problems to install the software.  And if the facts are that it is a product of 16 - bit and Vista is a 64-bit operating system, you won't be able to install it.  Support for older, 16-bit software was removed from Vista and Windows 7.  You would need to consider using a product such as Microsoft's Virtual PC or VirtualBox from Sun Microsystems virtualization to run - and if it were a game, same virtualization may not work.

  'Herb Ellicott City' has written in the new message: * e-mail address is removed from the privacy... *

  I can not load a CD rom.  I get the error message is that the CD rom is 16 bits and my Vista 64-bit.
  What are the solutions to make this readable CD Rom in my system.

• Windows 7, freshly installed, can not load the drivers, no usb, no cd player, no internet

  Hey guys,.

  I just installed Windows 7 64 bit on Windows 7 - laptop OS, but did not not any possibility of installing drivers. USB 2.0 does not respond, ethernet cable - no drivers. How can I possibly have to load drivers for the laptop computer?

  I'll try to find a solution, but nothing, only the similar problem was to change in the BIOS USB 3.0 2.0, but I have no idea how do in Insydeh20 bios.

  Hello

  If I understand you correctly, you have installed Windows 7 on your computer, but can not load the drivers that you don't have drivers CD. In addition to this, you can not connect to the internet through an Ethernet cable. In this scenario, we can only do two things to solve the problem.

  1. try to contact your computer manufacturer and ask the driver CD after mentioning your model number. You can also visit one of the shop of the manufacturer of your computer and ask the drivers CD and see if they can help.

  2. you can download the .exe file from the site of the constructor on any of the advertising of work computer and then install it on your computer using CD/DVD/USB.

  Hope I could answer your query. Feel free to post on the forum, if you have concerns more associated with Windows. We will be happy to help you.

  Kind regards

• BlackBerry BB Z10 Z10 can not load after the 10.3.1 update

  Hello

  I'm having problem with my phone that can not load after that (updated with 10.3.1). battery When I charge the phone, the LED turns red, and then appears the Blackberry logo and finally the Red battery logo appears telling me that the phone has no power. He keeps repeated several times.

  How to start up the phone?

  Please help me. Thank you.

  I suggest you try the method of automatic loader, very clean and very energetic:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-10-OS-device-software/upgrading-OS10-devices-using...

  Beware that it is completely destructive... the device will be 'as new'... None given, no apps, no accounts, etc. Remember you first take a full backup, as well as make full manual documentation of applications, accounts, configurations, etc. Sometimes a restore reintroduced corruption even sought to eliminate, and manual reconfiguration is required.

  You can also use it to return to a BONE earlier if you want... you can install any level of the operating system for which you can find an auto-loader. (Hint... search the site of CB!)

  Good luck and let us know!

• Startup error: DLL Load error can not load the resource dll: REPLRES. RLL the specified module could not be found

  Original title:

  ReplSync.dll - error loading DLL cannot load resource dll: REPLRES. RLL the specified module could not be found

  I get this error message whenever I start my computer: replsync.dll - DLL Load error can not load the resource dll: REPLRES. RLL specified module is not found Help please?  Thank you!

  Hello
  You did changes to the computer before the show?
  Method 1:
  Step 1:
  
  You can try to start in safe mode and check if the problem persists.

  The Advanced Boot Options screen lets you start Windows in advanced troubleshooting mode. You can access the menu by turning on your computer and pressing the F8 key before Windows starts.

  Some options, including the mode safe mode, start Windows in a limited State, where only the essential is started. If a problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic device drivers and services as a possible cause.

  Advanced startup options
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode
  
  Step 2:

  If the problem does not occur in safe mode, and then try to perform the clean boot and see if the problem still occurs. Clean boot helps eliminate software conflicts. For more information, see the following link:

  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the article mentioned above.

  Method 2:
  
  You can run Windows Defender Offline tool.

  See the following link for more information about the same:

  What is Windows Defender in offline mode?

  http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-Defender-offline
  
  Windows Defender Offline: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows/Windows-Defender-offline-FAQ
  
  Note: data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Method 3:
  
  Try the SFC (System File Checker) scan on the computer.

  SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.

  Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC/scannow is completely automatic and very easy to use, the tool should be usually one of your top not troubleshooting.

  Reference:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Let us know if it helps!

• have windows 7 x 64 and hp deskjet 656c can not load the driver he keeps giving me error code 0 x 00000057 down

  have windows 7 x 64 and hp deskjet 656c can not load the driver he keeps giving me error code 0 x 00000057 down

  Hello

  Please contact the Microsoft community. We will be happy to help you with your concern.

  According to the description, you can not install hp deskjet 656c driver you get error code 0x00000057c.

  How do you try to install the driver? Is it through the disc or via the site?

  Method 1: Use a troubleshooting tool to solve the problem:

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: temporarily Disable the Antivirus and firewall and try to install

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Try to install in the clean boot

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After installing windows update, follow step 3 in the link provided to return the computer to a Normal startupmode.

  Please follow these recommended steps, review the additional information provided and post back if you still have the problem. I will be happy to provide you with additional options.

• I can not load creative cloud on my mac - he gets to a point, then said that there is an error. I have lightroom on my pc. Help!

  I can not load creative cloud on my mac - he gets to a point, then said that there is an error. I have lightroom on my pc. Help!

  Error "Unable to install" received when installing Adobe Creative Cloud desktop application

• I can not load of dreamweaver mx 2004 on new computer

  I can not load of dreamweaver mx 2004 on new computer

  It is a product of macromedia

  Dreamweaver MX 2004 in activation Win 8

  Re: Problem with Dreamweaver MX 2004

  License transfer to Dreamweaver MX 2004

• Can not load my Palm Centro

  My Centro was working perfectly well last night, and I when I woke up this morning, he was dead.  When I arrived at work and tried to plug it in to charge, the Centro does not load off the coast of the USB.  The red light blinks, then turns off, so no red light indicating that any load.  It worked fine yesterday this way.  And my USB ports work fine in the case.

  Help!

  I went to the Verizon store over lunch, and they were able to charge the phone with the AC adapter.  Once he got a little expense, I brought to the office and now the USB cable does very well.  It seems that the problem is the USB cable can not load the phone if its totally dead.

  Message relates to: Centro (Verizon)

• For some reason, the installation of Adobe Acrobat program is on my computer and I can not load Flash

  No, I have does not load Acrobat or Reader, don't have Adobe Air. I can't find the installer for Adobe Acrobat on my Windows XP. When I go to download Flash, a message appears saying: "Installation of Adobe Acrobat, that only one Instance of this Application can run. I use Chrome for my FB games, because I need Flash. I have no idea how it happened. Yes, I posted this in the Adobe forum, too. Any ideas? :

  See this on uninstalling Flash drives:

  • http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html

  Note that this will remove all installed Flash drives.

• Can not load Iphone 6 Plus with Yoga2Pro

  Comments, said the port USB 2 was a port ' always on ', but I can't load my Iphone 6 more if the computer is in standby or off.

  I can load only if the computer is on and not asleep. I tried the various "power management" parameters, but it does make a difference. Any help would be appreciated.

  James

  Follow-up...

  I'm still rebuilding my Y2P, but try this:

  -Go to the start screen

  -Start typing "energy Manager" and select it.

  -From the application (open on the desktop), expand the interface (button at the top right of the gauge).

  -Select the tab "settings".

  -Flip "on" option "load USB".

  -Put your Y2P standby and then try to charge your phone.

  -2nd test, completely shut down your computer and try to charge your phone.

  The two tests work perfectly on my my Samsung Galaxy S3 of load Y2P.

  I hope this helps.

  Kind regards.

• I can not load down the windows store and does not refresh

  Windows said it fixed the problem but it still won't be updated also I can not down load Windows store, HELP I have no nothing to computing

  Original title: windows update doesn't

  This problem can occur for several reasons such as interruption of the connection between the computer and the Windows Update service, the system files related to Windows Update do not work properly etc. This problem can also occur if the manifest of components (CBS)-based services is corrupted.

  Follow these methods:

  Method 1.

  
  

  I suggest you to temporarily disable any third-party antivirus installed on the computer and check the status of update installation.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2.

  
  

  Start the computer in a clean boot state, and check the status of update. A clean boot to test if any element of service or third party application startup is causing this issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7, Windows 8

  : http://support.microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow the steps under "How to reset the computer to start as usual after a clean boot troubleshooting" in the article to start on normal startup.

  Method 3.

  
  

  You can reset Windows Update components, restart the computer and check the status of update installation.

  How to reset the Windows Update components?

  : http://support.microsoft.com/kb/971058/en-us

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  Method 4.

  
  

  Rename the Software Distribution folder and verify the installation state of update.

  Follow the steps.

  (a) press "Windows + X" and click/click on "command prompt (Admin).

  (b) open the command prompt window, type these commands one by one, and press ENTER after each command.

  net stop wuauserv

  net stop cryptSvc

  net stop bits

  net stop msiserver

  Ren SoftwareDistribution.old C:\Windows\SoftwareDistribution

  Ren C:\Windows\System32\catroot2 catroot2.old

  net start wuauserv

  net start cryptSvc

  net start bits

  net start msiserver

  (d) wait for the course to complete.

  (e) close the command prompt, and then restart the computer.

  Now, go to Windows Update and try to install the updates. Check if it helps.

  Of reference articles.

  Upgrade to 8.1 Windows: FAQ

  : http://windows.microsoft.com/en-us/windows-8/upgrade-to-windows-8

  Error code 0 x 80073712 occurs in Windows Update or Microsoft Update

  : http://support.microsoft.com/kb/957310/en-us

  Note: When you "Refresh" the applications provided with your PC or you installed on Windows Store will be reinstalled, however, all the apps that you have installed from other websites and the DVD needs be reinstalled as they will be deleted. You will find a list of applications on your desktop after you refresh your PC.

  Response with the State of the question and we will be happy to offer you our help.