I can not turn on WiFi
I just bought an iPad 4th generation. I can't connect to the internet, and when I looked up the Wifi no service came.
I went to the Apple website and it was recommended that I have unplug the router again. Now that I lost the WiFi in total, in other words, I can't turn on.
I just updated the software to IOS 9.02.
What can I do now? Can someone help me please?
Thanks in advance
view these documents
If your iPad is still questions after these two continue to this
If the problem persists contact apple, you have the additional help of 90 days with a new purchase.
EliteBook 2530p, Windows 10 home
Ive just upgraded the machine above 10 win 10 with the help of this site. Everything works fine except one thing, I can not turn on WiFi.
The orange LED on the touch screen under the screen and the front edge of the machine are both orange and when I try to use the touch screen to turn it on nothing happens.
All other keys work fine so I don't think that's the problem. I don't know another way to activate the WiFi on this machine.
The WiFi card is recognized in Windows 10 Device Manager and I have re-installed the card and made sure the antenna cables are properly connected.
Anyone had similar problems with WiFi / Win 10 works is not on this machine model?
Any help or advice appreciated.
I'm frustrated, trying to get the WiFi works because it is a machine I was in the process of selling and I had no user file to worry about, I decided to clean install Windows 10 and re - install Windows 7.
I did this and load all nessasary drivers but no matter what I did the WiFi refused to turn on. I did several searches and HP Wireless Assistant who got the status of 'Wireless LAN' was OFF but the Start button is grayed out so I couldn't activate it.
While remaining in the wireless Assistant I hit the WiFi button on the touch screen and a message appeared telling me to unplug my Ethernet cable. As soon as it is unplugged the button power on in the Wireless Assistant has become clickable and I was able to turn on the WiFi!
So it seems that if you connect an Ethernet cable to this model of HP, the WiFi system is disabled and the only way for him help is by unplugging the Ethernet cable.
I think I'm going to stick with Win 7 because I'm still not sure that the wireless card is supported under Win 10
Have HP Pavilion dm - 4 1165dx - normally F12 turns on WiFi, but this isn't work - like its frozen - 3 month old machine and it was working 24 hours previously - ideas?
So thank you very much for trying to help me - here's what worked in the end - when I got home, hooked to the laptop by a thread, and then went to the site already advanced by a technician:
Weblink for HP Quick Launch Buttons:
1. download the file by clicking on the button 'Download' or 'Get software' and save the file to a folder on your hard drive (make a note of the folder where the downloaded file is saved).
and the problem has been solved-
No wifi after windows 10. Uninstall my VPN afterwords, but still a problem of sam.
The keyboard button vill not turn blue. Tryied the Microsoft solution
You will need to return the system to Windows 7 using your diskettes. All this work and then upgrade to Windows 10 has.
I have a problem with my wifi. The button always orange and nothing happens when I press on it: no errors, no message, no reaction at all. This is why I can't use WiFi.
The laptop is a little new: I use only 2 months.
1. number and product name
HP EliteBook 8560p
2 operating system installed (if applicable)
Windows 7 Professional 64 bit
3. error message (if any)
No error message
4. all changes made to your system until the problem occurred
My windows crashed and I got it from archive created a few days ago. Archive includes all data from hard drives, the system has been restored exactly as it was before the accident. I still don't know if this caused the problem (or if the problem occurred after that): it happened a month ago, and I had no WiFi available at the time and only tried to turn it on a few days ago.
In device manager wireless card is appearing as functioning normally. In the management of the adapter Wi - Fi is on but says "no connection available. If I run diagnostic tests, he asks me to activate WIFI with a button on my laptop, which I can't do. In Mobility Center, it says "connection Wi - Fi is turned off". Activate the button is gray and impossible to click on.
I already tried things:
- Reinstalled all the HP drivers from original CD.
- Card WiFi removed in the windows Device Manager (remove device), restarted windows, installed new drivers for it, rebooted again;
- Checked the mobility Center as suggested in one of the threads available on this forum;
- Do a hard reset for HP laptop (battery removed, push the button and hold for a minute).
Thanks for any help!
I managed to solve the problem...
Turns out that the problem was (apparently) caused by HP Power Assistant tool shipped with my laptop. Default profile has been showing the gray bluetooth and WiFi, and it was not possible to turn them on. I created a new profile, and even if all the parameters are identical to the default profile, it allows me to turn the BT and WiFi and turn off without any problems. Button is working fine now as well and goes from blue to orange when I press it. Active WiFi and it works.
I hope this helps.
1. number and product name
HP Pavilian G6-1336SA
2 operating system installed (if applicable)
Windows 7 64 bit
Usually, my Wifi works fine and the blue light comes on during startup and I can switch it switch using the F12 key.
However, if my system starts the color is orange when WiFi is off, he's not the F12 key and activate the WiFi does not appear in the configuration options of Windows mobility.
This is a problem that keeps coming back from time to time and is quite frustrating because I often have to reboot the system to operate.
Any help would be greatly appreciated. Thank you
Ensure that the BIOS is up to date here and the WiFi pilot is the most recent. He could have used a different wifi card installed during the manufacturing process, you may need to try each by using the most recent driver version. It could be a default WiFi card. If the option to turn on all together it is missing, which usually indicates a faulty WiFi card. Youl could also try reinstalling the wireless card listed on page 52 of this guide.
I can't seem to activate / disable the wireless network.
FN + F8 key does not work, but other combinations FN + Fx works well.
Flash cards for UTILITIES-TOSHIBA-START restart does not work and flash cards are not displayed.
The drivers are up to date.
In: control panel-device driver network card
my card: Realtek RTL8188CE Wireless LAN 802.11n PCI-E NIC-> enabled.
My PC: Toshiba Satellite C660-2RP (PSC0QE)
15 days ago ca officials!
I restore at a later date, but nothing comes back.
Could you help me find the button enabling / DISABLING WIFI because I do not see a solution
Message was edited: assignment has been translated
I don't know if this will help but try to reinstall that Toshiba value added package (PVAT). Remove the preinstalled and after restarting the laptop version installed last versin that you find on the download page of Toshiba - http://www.toshiba.eu/innovation/download_drivers_bios.jsp
recently, I installed ubuntu 11.04 on my l645 laptop and I could not find out how to turn the wireless on this subject. but wireless is working properly, when I start the system using the live CD?
can someone help me solve this problem?
Maybe the driver WLAN card isn t installed correctly?
The problem is that most of the users here using the preinstalled version of Windows and Toshiba doesn't support Linux. I recommend you ask some Linux experts.
In addition, check out this interesting article:
[You know a useful site for Linux on PC support? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=14]
I have little problem with client model T. Satellite l500-1ek. I change orginal at BCM94321MC wifi wifi card mini pci card (rev 6). Card works well - everything is ok - driver installed ok.
But I can not turn on wifi with FN + f8 key - Windows.
This isn't a software issue - this button should work before starting any kind of system, but do not work. I tried everything, including the update of the BIOS. Card works correctly, but can not turn on wifi: (.)
Can anyone provide another solution than to change the map?
I have reinstaled value-added package and Flash utility support card - fn Panel works but buton f8 disappeared.
I tested with another card from mnipcie and have same problem - can not turn on wifi - fn + f8 does not work
Post edited by: Ipcur
Why you traded with another wireless network card model?
He works with the wireless network card preinstalled Toshiba?
I have a rather strange problem: I can not disable the WiFi using Fn + F8 module.
It happens after reinstalling Windows. I installed Windows 7 Pro SP1 x 64 (MSDNAA). I installed the driver Broadcom WLAN, then Toshiba Value added package and Bluetooth Stack from Toshiba Web site.
When I press Fn + F8 there is only a Bluetooth icon, I can enable and disable. And there is no WiFi icon.
Wireless network card is listed in the Device Manager, it works.
Before you reinstall Windows, when I had used pre-installed Windows 7 HP, it worked correctly: there were three icons, I could turn off/turn on WiFi, BT and the two WiFi + BT by pressing Fn + F8.
Does anyone have a problem like this?
Can someone help me?
Thanks in advance.
Hmm generally the FN + F8 should switch on / off the Wlan correctly.
Maybe the WLan driver must be installed again even if the wireless network adapter is already visible in Device Manager.
Welcome & good luck
I had a Toshiba L30-101 given to me for my birthday in 2006, he initially had Windows Vista on it so because of problems with this program.
I was later forced to get rid of this program and to install Windows XP, and I have not had a problem since.
However, last night, I forgot to bring my laptop, normally I do not panic as it happens in sleep mode, and yet when I lift the cover (when I do this windows XP starts and allows me to reconnect my phone) I have met with a black screen, nothing has been loading, nothing has changed, I was faced with a black screen.
I pressed the standby key and nothing happened, nothing happened even when I hold the button for a bit longer.
I disconnected the battery, and although 2 green lights showed that I should be connected on the right, I was always with a black screen. I left him a little and he's always like now, only 2 green lights went and it seems that there is no life be it current. I can not turn on,
I tried to reboot and nothing has changed.
I don't know what to do as this has never happened before. I might add that, even if I changed the program for XP I didn't no problems with it for 2 years and a half, until now.
Could someone help me at all?
Have you tried to remove the battery and the AC adapter? Remove the two, wait an hour and try again.
If it doesn t work I think that there is something wrong with the motherboard. Maybe it needs to be replaced or another part.
Therefore, you can contact the nearest ASP and ask for help.
Please help me. It's the third, I used the Mac, but it shut down suddenly. I remember that its battery is 60%
I use window before, so I know no way to use or difficulty Macbook
It can not turn on for 13 hours
Please help me. Thanks in advance
Try pressing the power button for 7 seconds let go and then press it again. See if that helps.
Automatic updates will not not turn on. I use Windows XP, SP3. I use the Micro Soft Security Essentials I goto the Security Center to turn on the automatic updates but it does not allow me to do. The light is red, not green.
Were there changes to the computer before the show?
Please follow the steps from the link and check that it works very well.
Check out the link:
You can not turn on automatic updates on a Windows XP Service Pack 2 computer
For all windows questions do not hesitate to contact us and we will be happy to help you.
I have Windows XP Professional with Service Pack 3. Microsoft does support this system more? I can't to update manually or automatically because auto has been disabled and I can not turn on again.
How to reset the Windows Update settings?
Unexplained computer behavior may be caused by a third-party software
You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update
The automatic updates service is missing
Update Windows in gray - restore (line 179)
Automatic Updates options are grayed out? :
My PC has been infected with XP antivirus2011. I ran Malwarebytes and it cleaned well enough. The only problem is now I can not turn on Windows Update, even via the control panel. Any suggestions?
1. do you get any error code/message during the installation of the updates?
2. have you done any change in software on the computer lately?
We start this problem with running the FixIt in the article below and follow the rest of the methods in the two articles below.
You cannot install some programs or updates
How to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation
I hope this helps.
Maybe you are looking for
How can I remove a 10 iOS app? All 10 iOS did when I press and hold, is to bring up a menu - which is a feature new, unexpected and undesirable new iOS operating system 10. This action is used to make the icons to move, I could press the "x" on the a
So, I was invited on the strange emails, usually carrying suspicious links, people on my contacts received. That happened a few times after that I got my MacBook Pro, but it ended shortly after he started, and I don't remember what I did to stop it,
I installed Thunderbird on 8 to win and he created the trees not one but two of the files. It seems I should divide the contents of my XP Application Data\Thunderbird folders and put them under the tree to win 8But what XP files go where?
I have Satellite A200 - Intel Pentium Dual CPU T2330 1.6 GHz Can I change the processor of the computer to a stronger? Sorry, I do not know English.
I have installed new drivers when they were bad, but it still shows: ink system has failed. Cannot print. Refer to the printer documentation. Error 0xc18a0001. Stop the power, then on again. When I turn it works again, I get the same message. Y at -