I can only start my computer in Safe Mode - system hangs on startup after installation of updates

Original title: UPDATES DOWNLOADED PROBLEMS to START NORMAL, MUST LOAD IN SAFE MODE - LOST AFTER 30-40 SECONDS VIDEO

After the download and installation of updates on my desktop Gateway (FX7020) the computer freezes on me and was forced to shut down hard. After a few attempts to start the computer, I was able to get into safe mode. After some time in the exploration of the event viewer I tried out and re-start of normal BONE. I was unable to make it through the boot sequence and had to shut down hard again. I waited a while and it made back in safe mode, but this time after 25-40 sec. I lost the video, the mouse, the keyboard. Everything was running. I've read a few articles and I hope that I don't have a F... THE OS.

Thanks any help will be graciously appreciated... RA

Hello

 
Method 1:
You can try restoring the system to safe mode and check:
Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
You can consult the links for:
System restore
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

Method 2:
If the problem persists, you can refer startup Repair in Windows Vista, which is a recovery tool that can fix certain problems. You can check the link:
http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions
http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

Tags: Windows

Similar Questions

  • I can only start my computer in safe mode, what can I do?

    Hello

    I can only start my computer in safe mode and my security settings are turned off, what do I do?

    I tried to download an anti virus scan, but it does not work?

    Hello

    1. what happens when you start your computer in normal mode?

    2. what version of Windows is installed on your computer?

    3 are you aware of any changes made to the computer, before the show?

    Assuming you have Windows Vista or Windows 7 is installed on the computer,

    Method 1:

    Perform a clean boot and check for the issue.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: once you are done with the boot, follow step 7 of article to put your computer to normal startup.

    Method 2:

    Check if your computer is configured to start only in safe mode.

    a. Click Start, type msconfig and press ENTER.

    b. click on the Startup tab.

    c. under Start Options, uncheck safe startup.

    d. click on apply and OK.

    I hope this helps.

  • Windows 7 Build 7600 this copy of Windows is not genuine - I can only run the computer in safe mode

    My son - under Windows 7 Home Premium - Dec 2010 laptop, purchased at Future Shop

    It has worked well for the past 2 years.  Suddenly, on Saturday, he stopped doing anything.
    That's happened?
    I don't know, but when I started upwards, normally, all I get is the 'black screen of death", with the words"Windows 7 Build 7600 this copy of Windows is not genuine ".
    I CAN'T DO anything HERE - can't make a right click, left click, CTRL ALT DEL, menu button - nothing works

    So I rebooted in SafeMode with networking - everything works fine.

    I have tried many fixes - when I read the topics - but NONE OF THEIR WORK in safe MODE
    slui.exe 4?  Does not work in safe mode
    Run?  Does not work in safe mode
    Start - computer - properties - activate windows now?  Does not come to the top, in safe mode
    However, he won't come to the top with a status or product ID
    Starter - activate windows?  does not work in safe mode
    I tried to download the windows / microsoft / genuine / validate the tool - but guess what, that didn't work either - update installation failed - error information 0x8007043C - probably does not work in safe mode - but that's all I have As
    I did a system restore - it 'worked' but ran very slow - and then when I restarted, the problem came back.
    and many others

    I ran Avast free on it - and anti-octets Malware - nothing - but I can only run in safe mode.
    Avast has some programs that run on the system re - start - but it does not start in normal mode - if none of them work

    I read a lot of topics on this - and I'm VERY FRUSTRATED

    I used another laptop - does the slui.exe 4 - and he asks me the activation key?  I can't that - not in safe mode
    I called the phone number - and talked to anyone - they told me to go through the www.howtotell.com - and report a counterfeit copy.  But it's NOT a COUNTERFEIT copy.
    OK - it's perhaps - but why it worked for 1.5 years?  And I bought from FutureShop, so should be reliable.  And I have the certificate of Authenticity on the back

    Don't forget - I can't do anything either in normal mode - but the Safemode with network works perfectly well.

    So, I don't know what to do.

    I don't think that's my problem - I bought a genuine copy, a reliable retailer.
    Anything you can do to help, would be greatly appreciated.

    I agree with this assessment.

    Hard drives come with a large number of spare sectors 'invisible' - it's only when they all well used by repair mechanisms built-in to the reader that the number of bad sectors Windows begins to increase from zero (in your case, it is a sector) means that there is already a significant degradation of the drive, and you can expect the count to start sooner or later back.

  • Why can't start my computer in safe mode to do a system restore?

    When I try to go to eyetem restore in safe mode, it will not go. I think I get

    Registration errors can help with this problem?

    It is somewhat similar to the following Technet problem:

    "SP3 hangs at agpCPQ.sys during startup"
     
    who offers this article as a solution:

    "Problems when Windows XP tries to load the Agp440.sys service.
     < >http://support.Microsoft.com/kb/324764 >

    That may help your problem.
    HTH,
    JW

  • I can't get my computer in safe mode. The custom of menu f8 "Let me pick something other than the normal mode. My keyboard works perfectly fine (obviously since I could press f8), but it won't let me choose Safe mode.

    I can't get my computer in safe mode.  The custom of menu f8 "Let me pick something other than the normal mode.  My keyboard works perfectly fine (obviously since I could press f8), but it won't let me choose Safe mode.  I have a Trojan horse on my computer so I'll try to get it in safe mode.

    Hello

    Start - type in the search-> MSCONFIG box find top - make a right click on - RUN AS ADMIN

    Control - Section Boot - Safe Boot Startup tab and check the boxes below if necessary - APPLY / OK - REBOOT.

    ===========================================================

    It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
    the Windows when you can.

    Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Malwarebytes - free
    http://www.Malwarebytes.org/

    Run the malware removal tool from Microsoft

    Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

    You should get this tool and its updates via Windows updates - if necessary, you can download it here.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
    (Then run MRT as shown above.)

    Microsoft Malicious - 32-bit removal tool
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

    Microsoft Malicious removal tool - 64 bit
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

    also install Prevx to be sure that it is all gone.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
    a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp  <-->

    Choice of PCmag editor - Prevx-
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    --------------------------------------------------------

    If necessary here are some free online scanners to help the

    http://www.eset.com/onlinescan/

    http://www.Kaspersky.com/virusscanner

    Other tests free online
    http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

    --------------------------------------------------------

    Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -----------------------------------------------------------------------

    If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

    http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • I can't start firefox even in safe mode.

    I can't start firefox. It is said that it can not load the profile. The profile files are there, I believer.
    I can't start firefox even in safe mode, by holding down the SHIFT key.
    I stopped firefox when he tried to do a refresh (it took a long time).
    So there is a record of old data that I copied the default profile folder.

    Hmm, also:

    arlener said

    .. There's a data folder I copied the default profile folder.

    If you want to use the content of the profile that you copied return, make sure that they don't are not 'nested' a layer down in the profile folder.

  • I can't start my pc in safe mode

    Can any one help I have a windows XP when I boot my computer I want to run in safe mode, to start, it ran windows normally or the safe mode options, but I can't move the selecter until safe mode, I think that the keyboard does not work on startup so I can't choose Safe mode no matter what knowledge is there another way to start in safe mode?

    http://bertk.MVPs.org/html/SafeMode.html
    (Scroll down to the "Alternative method to using the F8 key"...  "But you should understand why you don't have a keyboard at that time).

  • Cannot defragment the hard drive AND cannot start the computer in safe mode

    I have been unable to defragment my hard drive because it tells me that chkdsk /f planned.  I tried manually works in command mode nothing works.  I was advised to try to start up in safe mode, but when I do that all I get is a screen of command lines, and my computer freezes there.  What I'm doing wrong and what I can do differently?

    If you try to defragment a volume and see a message like this:

    Disk Defragmenter has detected that Chkdsk is scheduled to run on the volume: (c :))
    Please run Chkdsk /f.

    This means that the volume (disk) that you want to defragment was marked 'dirty' XP.

    The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

    The afflicted system has a working CD/DVD (internal or external) drive?

    You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

    You can check the status of your bit of impurity from a command prompt window.

    To do this, click Start, run and enter in the box:

    cmd

    Click OK to open a command prompt window.

    For example, to query the bit of impurity on drive C, type:

    fsutil dirty query C:

    The sample output:
    Volume c is dirty
    Volume C: is dirty

    Is the volume of your sale or it is not dirty?

    The only way to disable the on a volume's dirty bit is to run chkdsk with error correction.

    You can click on start, run and enter in the box:

    Chkdsk /r

    Click OK and answer Yes to schedule the chkdsk next time XP restarts, restart your system and keep your fingers crossed that the chkdsk /r clears the dirty bit (you may need to run once or twice).

    If who disobeys, then you will need to start in the XP Recovery Console and run the chkdsk /r from there.

  • I tried to start the computer in safe mode, nothing works. All of a sudden my icon text in paint is dark. Why?

    Found the answer... the text bar is still gray but I was able to unlick

    in the toolbar and I was able to add text.  Not sure, maybe "text".

    the button was grey all along?  I don't think, but I can choose only three of

    the four options that allow a check mark in the view menu: toolbar, color and the State.  The text

    has a check, but it is gray, cannot be enabled or disabled.  Maybe I just never noticed it before.  Could

    Add text by clicking on the toolbar tools, then reclicking thereon.  Odd.  It works and that's all that I needed.

    Hi Gail Harris,

    Safe mode is an option of troubleshooting for Windows that starts your computer in a limited State. In safe mode only basic files and drivers needed to run Windows are started.

    For more information, please visit the links.

    What is safe mode?

    How does safe mode?

  • I can't start my computer in normal mode

    I have a big problem with my computer. When it starts, I see a blue screen for abpout a second, and then it restarts.

    It will only work in safe mode and I canoe do a system restore. Also when I tried to restore settings that he asks a different user login and password... I've never used one, sign in again.

    He gave me an error code of 2000-0148... whatever it is!

    I have the installation CD, but it won't let me run it in SafeMode... help please...

    In Safe Mode, you can configure the computer to "clean boot" - follow the step 1 to clean boot:

    http://support.Microsoft.com/kb/929135

    Then see if you can boot into Normal Mode.

    In addition, it can help to look at the files minidump against accidents with a debugger.

    Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?

    The following link has information about the use of Windows Live SkyDrive:

    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    If you have problems to compress the minidump files copy the minidump files to another location such as a folder on the desktop

    In addition, you do not necessarily have compress the minidump files, you can download one at a time.

  • start the computer in safe mode

    hard drive detected problem iminent failure press F1 key to continue... After pressing F1 computer won't start in safe mode

    so I check apparently I solve the problem. I run a system check and all is fine... I reboot my computer and I get: problem hard drive detected iminent failure press F1 to continue... boots up in safe mode only... the changes ive made did nothing because when the computer reboots, it starts again in SafeMode only. but with the networking and database drivers and the DCs as startup options. nothing seems to stick to restart the computer for the changes to take effect.

    Hello

    'problem detected hard disk iminent failure '.

    The hard drive is faulty

    Back up your data > buy a new hard drive > reinstall the operating system.

    To be sure, this is the problem do the following:

    Go to the website of your computer manufacturer > find specifications of hardware in your computer (hard drive) > access the Web Hard Drive from the manufacturer site > download their diagnostic software > make a Bootable disc > test your hard drive.

    See you soon.

  • Following a power failure, I can only open the pc in safe mode.

    The computer "sounds" as if he started, but after the opening of microsoft bar, startup screen, the screen goes black.  I was able to open in safe mode and have also booted from the dvd diagnostics.  There is no problems identified during diagnoses are made.

    In safe mode, the computer connects to the internet, but I am unable to download certain corrections in safe mode.

    This problem occurred shortly after the Windows Live Essentials update.  I can't remove the update.

    Try a restore in safe mode point.  That might solve your problem.

  • start the computer in safe mode and appearing automatically jump to the top of websites

    Original title: appearing automatically jump to the top of websites and to hear the mouse click as sounds radomly
     
     
    Microsoft community.
     
    I have essentially two problems in my computer.
    (1) since almost a month my computer automatically goes into safe mode when I pass it on or restart. So, I have to change the user account to come to normal mode.
    (2) in addition to this since 5 days I noticed pop-up program (exactly which is the site web news.net ) in the right corner of my computer screen and it comes with random noise (similar to a mouse-click) that I mentioned earlier.

    I guess this program automatically installed when I tried to download another program almost a week back.
     
    I tried to remove the program using Control Panel, but it is not in the Panel.
    Then I ran a Kaspersky internet security scan (license and currently updated version) that was installed in my computer and then I ran Microsoft security scanner and none of them could picked up a problem.
    So I ran computer more secure mood.
     
    When I tried to clean the boot. I noticed only with safe mode even if the clean boot dialog box appeared options such as ok or cancel orders are not visible or they are absent (or damaged). Here, because I couldn't do the clean boot function properly.
    And I always get that previously mentioned his pop-up at random.
    So I am worrying because this could be the virus and it can harm my computer or your identity. I really appreciate if you can help me in this regard.
    Thank you
    Kind regards.
    Charef

    Please keep us updated on the issue.

    Glad to know that the issue of pop-up got sorted.

    I suggest you try the steps mentioned in http://answers.microsoft.com/en-us/windows/forum/windows_7-system/computer-randomly-goes-into-safe-mode/15444b39-38f5-4f2c-ae2f-a87501ee72ab?msgId=a2eefafd-93c5-4d13-b63b-0fdad30ea2a5

    Let us know the results after trying the steps mentioned in the link.

  • How can I start my laptop is safe mode? This is an advantage of Pad think Lenovo. I tried F8, but it does not work

    Need to safe mode to correct the profile Service has not logon. The profile is the only Director in place.

    Hi Jose,

    Perform the steps mentioned below and check if it works.

    a: Type msconfig in the start search box and click on enter.

    b: Now, click on the Startup tab.

    c: Now place a tick on the option start.

    d: Now click apply , then ok.

    Note: To return to normal startup uncheck the startup option.

    Hope this information helps.

    Just reply to us if you have any questions.

  • How can I restart my computer in safe mode?

    Need to put the computer in Mode safe to uninstall a program

    1. reboot the computer.

    2. tap on the F8 key several times when he lights everything first before entering Windows.

    3. Select the Safe Mode option

Maybe you are looking for

  • Tecra M1: Need a compatible CD/DVD player

    Hi guys. I have a second user M1 windows XP SP2, the dvd - rom drive has been temprmental (sd-2612)I tried a cd-rw/dvd-rom sd-r2512 by exchanging the caddy, but it does not recognize anything in the Bay.Start gives ide #error. If it's not compatible,

  • Driver Windows 7 for HP g4-2217TU

    Hi CV Expert. could you help me to provide the driver hp g4-2217TU for windows 7?

  • How can I download pictures from my Blackberry to my PC memory card?

    I am trying to download pictures to a graduation ceremony which was taken on my Blackberry, but I am unable to because the adapter that I use will not work.  I want to get the pictures developed!  I decided to download the pictures to my PC and then

  • There is an unknown entry in my Hotmail Contact list

    In my Hotmail contact list there is an entry called FunRoom; it is in bold.  I didn't add this to my list of contacts. and I can't remove it. I can not see when I go to Contacts and open the list here.  The only time I see it is if I'm composing a ne

  • What is a plastic tip (for? unscrewing lock optical drive lock.)

    Hello - Thank you very much for any help.  I saw instructions for how to change the DVD drive in my Dell Latitude D630.  He said, under Tools: small screw drive Phillips Head, plastic to mark the guy in the video only used a PH.  I tried a low PH, bu