I can parallel two solid state relay ports for a maximum current of 1 AMP USB-6525?

Hello

I plan use USB-6525 to change a PSU 7VDC/1 AMP DC.

USB-6525 having only 500 my maximum current for each channel, I can two parallel ports of relay to solid state for a maximum current of 1 AMP?

Is it safe to use in this way?

If not, is there any other USB device can provide 1 channel AMP relay?

Thank you

Ben

Hi Ben,

Yes you can do this, please refer to the KB, it contains the information you need

Can I use several relay on one device to allow power to pass?

Kind regards

Margasan

Tags: NI Hardware

Similar Questions

  • OR PXI-6289 Digital Output Solid State Relay

    Hello

    I try to control a mechanical solenoid pull using a relay of sold State connected to my PXI-6289. Currently I have the CRDD connected to Port 1 line 4 and use the code provided here http://zone.ni.com/devzone/cda/epd/p/id/6411 . However, every time I run the code, the light on my SSR (wired to show the logic works http://www.adafruit.com/products/268) does not illuminate indicating that there is no signal to be output. Any help in this matter would be much appreciated. If additional information is needed please let me know.

    Best,

    Brad

    Nevermind, problem solved it was just low power.

  • How can I change a setting of port for outgoing mail?

    All trying to set up an e-mail account to Outlook, I need to change the outgoing port - how can I do this?

    Go to mail > Preferences > accounts > "Advanced" tab  Here, you can change the port to whatever number is necessary.

  • Solid State Drive (SSD) for notebook 1160us dm4, a SATA II or SATAIII?

    I would go to an SSD and I was wondering if this laptop supports SATA III or 6 GB/s transfer rate. The HARD disk that is in a Seagate ST9500420AS ATA and research shows that he has a transfer rate of 3 gb/s. I don't know if I should buy an SSD is 6 GB/s or 3 Gbps. don't know if the motherboard supports (SATAIII / 6 GB/s)?

    Thoughts? Someone has upgraded to SSD s. Also, how / what did you use to transfer the old drive or you just reinstall Windows 7?

    Thank you

    Harry

    Hello

    1. most likely, it is a SATA II controller. You can use the following program to check:

    FTP://FTP.CPUID.com/PC-Wizard/PC-wizard_2012.2.11.zip

    (In my case, the controller is a SATA III).

    2. I normally have "clone" of the HARD drive, this will save a lot of time to reinstall many things. I use a product called O & O DiskImage to perform this work, very fast and the success rate of 100%. A small note: you need a larger SSD (capacity) than the drive that you want to clone - normally C:. You can try this free product:

    http://www.EASEUS.com/disk-copy/

    Some SSD vendors also provide a product of cloning for you to do this work.

    Kind regards.

  • Can not get the States of relaxation for work in the widget of blank publication of Muse

    Hello

    I don't know what I'm doing wrong, but I cannot get States to trigger (thumbnail) to work in the blank publication. That's what I do:

    I click on one of the triggers (thumbnails), open the States Panel, select the Normal State and fill the tile bearing the image of the . Then I select the rollover State and reduce the opacity to 50% or make any other changes to this State. I see [in the States Panel, in design mode] now in the States Panel which show both normal and Active image with an opacity of 100% and turnover and the mouse down show with an opacity of 50%. BUT when I preview the page in the browser, move the pointer of the mouse on the trigger does not change state of the thumbnail. It does not raise the change of the target, but the thumbnail itself doesn't change States. The idea is that when I mouse over the thumbnail, an image appears in the target box. But I also want the thumbnail to change status while in the rollover State. I have attached a screenshot of the Options Panel in case it helps.

    Any help with this will be greatly appreciated!

    Tania

    2015-06-02_2-39-04.jpg

    Depending on your options settings of Composition, changing the active State to the same settings as your rollover State. When you hover over the trigger will change and show the target.

  • State of relay by default USB-6525

    Hello

    When the NI USB-6525 enclosure is powered on the default state to solid state relay is closed.  I'm trying to use it to control a 4 position RF switch.  Obviously we do not want to be on as this disrupts the 4 switch inputs.

    Is it possible to change the default state of the relay, so that when the device turns on the relay are all open rather than closed?

    Hi SeanJ,

    Sorry for the delay on this point - I just noticed this post by searching for clients who may have encountered this problem.

    From DAQmx 8.9, programmable start-up States have been added to the USB-6525.  However, flash on these cards was not initialized correctly to 'open' State, so the check for PPS caused tips have added a default PPS to 'closed '.  The solution is to simply set the States start to their desired state.  This can be done through MAX as follows:

    All the councils that are currently on the market have their flash correctly initialized to the open State.

    To reduce the risk of this question anyone adversely affecting during updates, we also add a check for the firmware in DAQmx 9.2.2 and later charger to initialize the flash if you are upgrading a version of the driver without PPS.  If the upgrade to a version of the driver with PPS, the startup States will not be affected.

    More information can be found here:

    Behavior of the start state Programmable NI USB-6525

    I apologize for any inconvenience that you please do not hesitate to let us know if you have any questions.

    Best regards

  • Solid State drive in dv8-1110eb

    I can install a Solid State drive in my dv8-1110eb, done it really accelerates my Win 7, 64 bit system, and what SSD would you recomment?

    Greetings,

    Onni.be

    Hello Jürgen.

    Here are some tips during the reinstallation of the operating system and all your applications. You can use the tools of W7 to see the mirror your hard drive image and create a system repair disc. These two applications work to restore the operating system at the time of the creation. If the new SSD is smaller in size, this method will not work. You can use your HP recovery DVD in this case, or you can install a retail version of W7 and use your key to product from the underside of the laptop. To do this there must be the same exact version and it must be installed as a trial. When it's time for you to enter the OEM key, go to the properties of the computer and at the bottom of this page you will find 'change product key '. This is where you enter your OEM key.

    Download secure for W7.

    http://www.mydigitallife.info/Download-Windows-7-ISO-official-32-bit-and-64-bit-direct-download-links/  Do not use rewritable and make sure it is a good brand. If you choose this method, I can show you exactly where everything that get you the drivers and even get the access keys work. You "eject" Volume OSD Bass and treble etc, everything will disappear with the commercial version of W7.

    I'm using Adobe CS4 and you will be surprised to know how fast your CS5 will run!

  • My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

    My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

    Time Machine backup to a sparsebundle.

    The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

    Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

    You has of course set the exclusion in Time Machine?

    By default, Time Machine will exclude your second drive unless you have included it. Did you?

    Once you get to this level during the backup, you can do a full restore manually whenever you want.

  • Hello everyone. I recently installed a Samsung SSD (hard solid state drive) in my destop PC. For some reason any Lightroom do not see? So I can't ingest pictures of her, or copy photos from a card itself. It is not listed as a player option. See LR

    Hello everyone. I recently installed a Samsung SSD (hard solid state drive) in my destop PC. For some reason any Lightroom do not see? So I can't ingest pictures of her, or copy photos from a card itself. It is not listed as a player option. LR sees any other drive. My computer he sees very well, so I was able to create a catalog it. IM using windows 8.1. Any ideas? I would also add that this drive has become corrupted and was repaired by Samsung. Maybe they did do a very good job......

    Did receive the disk with the letter of A: or B: drive? See below, which deals with the question:

    Re: lr 4 does not display the new hard drives > 2 TB

  • 27 "mid 2011 iMac drive solid state drive is dead and must be replaced. Is this easier to do than to to replace a HDD with a SSD? I hope I can do it myself.

    My 27 "mid 2011 iMac drive solid state drive is dead and must be replaced. The SSD originally came with the computer and not a subsequent update. I understand that a SSD replacing a HARD drive is quite complex, but would be more simple replacement of a dead with a new SSD SSD? I hope I could make myself.

    Even as the replacement of a HARD drive. However, go to OWC buy the connector of the special drive that has the necessary temperature control that is not part of the SSD, because it is for the stock of HARD drive.

  • HP f9250m would update for Solid State Drive

    Hello

    I would like to buy a new drive hard primary year am interested in a Solid State Drive (SSD).

    The most recent Intel SSD SATA II will connect to my motherboard?

    Here are the specs of my computer:

    http://h10010.www1.HP.com/wwpc/ca/en/Ho/WF06b/12132708-12133156-12133158-12133158-12133158-81670475-...

    Any particular SSD that you would recommend?

    Thanks in advance!

    almac7 wrote: I would like to buy a new drive hard primary year am interested in a Solid State Drive (SSD).

    The most recent Intel SSD SATA II will connect to my motherboard?

    Here are the specs of my computer:

    http://h10010.www1.HP.com/wwpc/ca/en/Ho/WF06b/12132708-12133156-12133158-12133158-12133158-81670475-81979152.html?JumpID=oc_R1002_CAENC-001_HP%20Pavilion%20Elite%20m9250f%20Desktop%20pc&lang=en&cc=CA

    Any particular SSD that you would recommend?

    Hello almac7, it seems that your system must be able to withstand a SSD hard drive. You may need an adapter to install the player in a Bay 3.5 inches.

    Given that the SSD is a new parent and the ever-evolving technology, it would be difficult to recommend one disc rather than another.

    They all seem to have their positive and negative characteristics.

    You also need Windows 7 as operating system, with the support of the Trim function now on most of the SSDS.

    Here is a link for the specifications of your system. It shows that there are six sata (ports) for readers. It also shows that the system was delivered with two 500 GB hard drives. These discs can be in a Raid0 configuration. You will need to reconnect these drives to other ports, and then connect the SSD to port0.

    I have search for comparisons of different brands and models and determine what brand and model, and price range would be tailored to your needs.

  • What are the advantages and disadvantages of using iCloud drive (or other Cloud services) compared with iTunes game against external hard drive, Solid State etc. to store my songs iTunes, playlists, ratings etc?

    First question: what are the advantages and disadvantages of using iCloud drive (or other Cloud services) compared with iTunes Match against Solid State external hard drive etc to store my songs iTunes, playlists, ratings etc?

    Please let me know what are the alternatives for storage of my songs, playlists, song etc. other than iTunes game ratings ($ 24.99 / year)?  Is there a way to store all my songs with my song ratings, playlists, etc. with a CD song quality? Most of my (currently 130 GB) songs on my computer are CD quality that I prefer to keep as well as my notes of each song (i.e. 5 * vs. 4 * etc.), playlists, groups (music, classical, popular, country etc.).  What are the advantages and disadvantages to store my iTunes songs while CD quality with my personal notes, reading lists, groupings in the cloud?  ICloud of Apple Drive ($ 2.99 per month or $36 / year for 200 GB) would be the best way to automatically update and maintain my rankings iTunes personal including the future editions of the song etc or using Amazon, IBM, Microsoft etc cloud or an external hard drive SSD would work as well and maybe cheaper?  I currently have my iTunes on a PC of 2007 with vista (I use a 1 8T Western Digital external upward by car for my personal info all over HP, songs, photos etc. which is currently close to 170 GB) but also have an Apple i-phone 6 & I Air cushion.  Although I did not need to have all of my music with all their sides, etc. available on all of my devices at all times as iTunes game, I still would have easy access to information on both my PC and my iPhone or iPad?  Thank you.

    In my opinion?

    I back up my data to an external drive for several reasons.  The first is my data - if I put on the cloud, someone else has control over it, they can see what I have and change the preferences to what they see of marketing.

    Almost as important as that - if I had to rely on the cloud whenever I wanted to update my playlists on my phone, I need a better internet connection I have now (working at sea).  To get the best out of the cloud, you need a solid link to home, work or mobile.

    As a spin-off - I hate the fact that Apple take away a feature in their software updates and then allow an app to be sold in their store to replace this feature - or worse still, some features that were available before the updates are now "cloud only."  And Yes - you have to pay for the cloud.  I like most of the people do not appreciate the 'accomplished fact. "

    From the back of the external hard drive ASI downside, is that to be safe, you need to store outside in a separate computer place.  If keep you them together, if one is lost, probably, they are both.  That is to say for me a full backup before you travel, then a new upward as soon as I go home.  Downside is how much data may be lost between the two back ups if I needed to restore.  For me, its worth the risk.  If I was away and say had bought a ton of new music and couldn't go home anytime soon, I can always head to the store and buy a new external drive, they are massively expensive.  Even if my computer has to go for repair and my remote is to halfway around the world - I want to buy a new one.

    Now, some will say that once you buy a new external, you spend more than you would on a cloud subscription.  It's true, but in the 6 years following the purchase of Mac that I've only had to buy a new external once - so with a little luck and planning - it works.

    I left took well - I am not a subscriber of cloud, nor do I want to be.

  • Solid State Drive

    Hello

    I have a HP 15 t-n200 (Pavilion TouchSmart 15 t), not product. F4W68AV.

    This laptop can be upgraded to use an internal Solid State Disk drive?

    In addition, by examining the characteristics of this laptop, it does not specify the interface hard disk other than SATA 300 MB/s transfer rates.  Anyone know if it is SATA I, SATA II, SATA III, mSATA or...?  I find the specifications in the service manual to be a little less useful since the maintenance manual usually cover a wide range of products, and I have a wire deterimining trouble just what hardware is inside of me.

    For example, in the case of the drive hard, my original Bill said I have a 750 GB 5400 RPM hard drive.   The repair of the lists at least two possibilities that fit this description, namely p/n 634250-005 (750 GB, 5400 RPM, 9.5 mm) and 732001-005 (750 GB 5400 RPM + 8 GB NAND hybrid, 9.5 mm, for use with computer models equipped with Intel processors).  Now my TouchSmart has a 4th Gen processor Intel i5-4200U.  So does that mean I have a p/n 732001-005?  How can I be sure?  By reading the manual, the hard drive is not accessible AFAIK, so how in the world you will find what you really inside?

    Thank you.

    Please see your order confirmation, duplicate customer, or invoices for the exact specifications of your computer. According to the HP Pavilion 15 Notebook PC HP Pavilion TouchSmart 15 Notebook PC - Maintenance and Service of Guide for your computer, this model supports the following:

    6.35 cm (2.5 in.) of hard drives in 9.5 mm (. 37-in) and thicknesses of 7.0 mm (. 28 - in) (all hard drives use the same bracket)
    Customer-accessible
    Serial ATA (should be SATAIII, which is compatible with SATAII)
    Protection accelerometer support

    Supports the following drives:
    1 TB 5400 RPM, 9.5 mm

    750 GB, 5400 RPM, 9.5 mm
    500 GB, 5400 RPM, 9.5 mm and 7.0 mm
    (Supports the SSD mSATA 24GO with system memory up to 8 GB (for use with models to select a computer with Intel processors and discrete graphics switchable))
    Supports the following hybrid readers:
    1 TB 5400 RPM, + 8 GB NAND hybrid drive HARD; 9.5 mm
    750 GB, 5400 RPM, + 8 GB NAND hybrid drive HARD; 9.5 mm
    500 GB, 5400 RPM, + 8 GB NAND hybrid drive HARD; 7 mm

    The supported above list is not exhaustive and is typically what HP moved to the factory. Assuming that your Bill lists the 750 GB 5400 RPM hard drive, it's not going to be the 750 GB, 5400 RPM, hybrid HARD drive because there is no indication whether the hybrid. Your computer will also support most hard SATAIII after-market, hybrid hard drives and SSD drives (solid state drives).

    Removal instructions / replacing the hard drive begins on page #63 of the HP Pavilion 15 Notebook PC - Maintenance and Service of Guide. These are very detailed instructions and require the dismantling of many components.

    If you have any other questions, feel free to ask.

    Please click the 'Thumbs Up' white LAURELS to show your appreciation

  • HP TouchSmart IQ816: Conversion of Solid State Drive

    I want to upgrade the hard drive in my HP IQ816 to an SSD.  I'll clone and then redeem on the HD with the SSD.  I'm trying to find a compatible SSD (256 GB). HP presents a Kit - 2.5 "Solid State Drive & Upgrade Kit v300a/ak

    I wonder if who is the kit good or is there a better or more consistent for this purpose.

    Thank you...

    Rick

    You will find it useful:

    Upgrade manual

    It's the HP upgrade kit:

    http://www.shopping.HP.com/shopping/PDF/h5a88aa.PDF

    Don't know how much it costs but I suspect you can get a much cheaper SSD. Also, I would say that you can use any 3.5-inch bolt adapter 2.5 in this with the SSD in the sled used originally for the larger HARD drive and place the data and power on the SSD SATA ports to the outside, you can connect the wires from inside the computer for them.

    http://www.Amazon.com/Silverstone-technology-3-5-inch-converter-SDP08/DP/B002BH3Z8E/ref=sr_1_3?ie=UTF8&QID=1438631892&SR=8-3&keywords=3.5+to+2.5+inch+hard+drive+adapter

    Let us know if you need help most.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • Firebird 802 - upgrade hard drives - Solid State / hybrid anyone?

    I'm upgrading hard drives on my Firebird 802 (the part the WEAKEST of my Firebird and the SMALLEST score on Windows Index). I replaced the drive secondary with a Seagate 500 GB SATA drive at 7200 RPM (ST950042 4AS) and REALLY improved performance (I have my file on the secondary drive).

    It's now time to upgrade the MAIN disk. I'm looking at a "Hybrid" car A Seagate ST95005620AS Momentus XT 500 GB Solid State Hybrid Drive - 500 GB, 7200 RPM, SATA 3 Gb/s.

    Has anyone tried upgrading the main drive of a hybrid? For a solid Sate drive?

    Thank you

    Enzo

    Well WELL, @ 10:39 PM PST after FOUR and a HALF and TWO attempts of the hybrid drive WORKS as my main drive on my Firebird 802!

    Using the data transfer software CMS Bounceback ($14.99 per download) the program was missing several files that were essential for the computer to boot. Once I checked the transfer journal and moved the files myself IT BOOTS!

    THUS, in a few weeks, I'll post the kind of increases in speed that I experience. First comment, my drives are running @ 98 degrees F. It's HOT, so I'll have to come back a fan for the hard disk enclosure, in fact, you can put at the front of the box and jump through this background grid. Going to put in place tomorrow. Now I'm BEAT!

    Thus, it CAN BE DONE on your Firebird! Solution, HERE!

    Thank you!

Maybe you are looking for

  • I have a HP G62 NoNotebook PC that gives me the code system off 99110121

    I have a HP G62 NoNotebook PC that gives me the code system off 99110121

  • Replacement for my mother/graphics card?

    Hello everyone I wonder if anyone knows where to find a very good and best motherboard for my dv7 - 4077cl, good as now I have the default Board I looked into amazon.com and found only 4 Motherboard with the ATI Mobility Radeon HD 5650 graphics subsy

  • CD does not-security settings?

    I have a CD that I need to use for the training modules which is connected to the internet.    But when I put in, it simply works and does not load.  This could be a parameter of security somewhere that I can't find?  It works on all other computer b

  • For Windows Vista, Service Pack 1 will not completely install.

    On Windows Vista Home Premium, 32 - bit system, trying to update Explorer 7, that no longer works, to Explorer 9, which requires SP1 (KB936330) and SP2 as required components.  I use Windows Update method, Guard sent me with Service Pack 1 (KB936330)

  • Make a keyboard WebWorks BB10 compatible applications for Q10

    Hello Asked me to wear a WebWorks application originally designed for the Z10 to the Q10. One of the requirements is to make the application compatible keyboard. What they mean by that, is that, in the application, a user is presented with a series o