I can ping a host using the IP, but I can't connect to the network drive

Similar Questions

• RoboHelp 8 runs slow when you use the network drive...

  I have several users at my company who improved RoboHelp X 5 RoboHelp 8. They report that when they are working on projects that are located on a network drive, RohoHelp running very slowly (which never seemed to happen before with X 5). I read on several forums that RoboHelp must be used with projects that are on the local drive, but I can't find any formal recommendation to Adobe about it, or have no explanation as to why the network drive doesn't work well, I found. At Adobe all officially commented on it, and no one knows why the performance of the network drive is bad? Is there anything that can be done to allow my users to keep using their network without the poor performance? Thanks in advance for any help you people can provide, I'm stumped.

  Hello and welcome, Robo_Newbie

  You're about to become real Robo_Oldie fast

  Your projects RoboHelp MUST live on a local drive. You can archive them on a network, but NEVER actually open and change while they are on the network.

  The two reasons most people incorrectly assume that they should be on the network is because you want to share with other authors and you want to back up in case your hard drive goes down. These are valid reasons, but it does not work because the. DPC (a cache of the Access database file) usually becomes corrupt - not to mention latency LAN-related performance problems.

  Until most of us do is either use the free RoboSource Control that comes with RoboHelp or establishing a manual routine to copy your current job to a LAN for more safety and establish a routine with the other authors who will be working on what, when.

  Sorry to break the bad news. That is the reality.

  John Daigle

  Adobe Certified RoboHelp and Captivate instructor

  www.showmethedemo.com

• I can't use windows Explorer or the network drive mapping to access my NAS drive more.

  original title: strange NAS problem

  Hi everyone I can't seem to fix this strange problem.

  I can't use windows Explorer or the network drive mapping to access my NAS drive more.
  I am running windows 7 Professional 32-bit on my PC, and until about a week ago she accessed from my PC very well.

  The location could not be reached and have not been able to run since said today that I went to update it and the drive mapped. I'm at my wits end.

  Here is some info.

  I can access to other computers and devices on my network.

  I can access the internet.
  I have a windows XP PC in the House who can always connect to my fine NAS drive (even if it's not mine).
  I PING the NAS drive.
  The NAS drive will do the same if connected via cable or by wireless.

  UPDATE: after the implementation of a shared folder on a Windows XP computer on the same network I am also unable to acsess the part of my PC. So I can assume that I can't browse all share folders or NAS drives on my local network.

  Help, please.

  Thanks for the help, but I fixed my problem

  Here's what I did in case anyone wants to know.

  I went into Device Manager and went to network adapters.
  I then expanded this section and under view changed to display hidden items.
  Several hundred elements appears (for most 6to4 adapters) and I deleted all the.
  Then click scan for new hardware.
  And... everything works again! YAY!

• Satellite U300-14 b: can I use the graphics driver for the Intel page?

  My Satellite U300-14 b (VIsta 32 bit Home Premium, 2 GB) has a 'Mobile GM945 Express Chipset Intel'. Download from Toshiba site, says I've got the latest driver, namely 7.14.10.1263 dated 04/25/07.

  The Intel site lists their latest driver such as in date 7.14.10.1364 dated 11/12/07.

  I want to try the latest version of the driver to help solve a problem of occasional crash / restart when Vista wakes from sleep. I am told that the graphics drivers are often to blame and should therefore be updated.

  Can I safely updated with version 11/12/07, or I risk of problems? Not sure if Toshiba are just slow to release the updated driver, or if there is a better reason that they did not?

  Well, usually you can use the graphic driver directly from Intel page but I found several threads here in the forum that said that the chart non-Toshiba drivers can be installed and used only at your own risk

  > want to try the latest version of the driver to help solve a problem of occasional crash / restart when Vista wakes from sleep
  Hmm perhaps this problem could be related to the graphics driver, but I recommend you to update to Vista and install all THE patches for Vista.

  Best regards

• I use iphone 5 s updated to 9.2, but I can not use the network and call :( Please help me

  I use iphone 5 s updated to 9.2, but I can't use the network and call someone help me please

  What happens when you try to use the network?

• Host on the network is busy

  I have a whole new Photosmart D110. Wireless seems to install properly, printer is visible on the network, install from the disk of the factory driver. I'm on a MacBook OSX 10.5.8

  I can see the printer through the web, and utlity HP pages toner levels, etc. But I cannot print a page and can not print a test page. I get the error 'HP7433EE' host network is busy. retries in xx seconds...

  I printed files from using e-mail to web functionality but can't make it work wireless. What can I do?

  I just had this same problem. Actually I had mine hooked rugs for a coupla' years, then he started does not print and display this message in the queue.

  Here is how I fixed it:

  -I took the suggestion to go to Sys Pref pref. / printer, right click on the printer and select "reset the printing system.  He will wipe away all of your printers, you'll then need to reinstall.

  -My printer is connected to my wireless network and has a static IP address. As part of the "Add a printer" dialog, I select 'IP' and 'Protocol', I chose "HP Jetdirect taken."  And then I made sure to select the specific HP driver for my model, instead of using the generic driver.

  Before, when I had wiped my printers, I chose 'PPI' under the 'Protocol '.  I don't know what caused this to panic all of a sudden, but that's what fixed it for me.  Good luck!

  Juliana

• host of the print driver for applications stopped working 5100cn

  I don't know if my previous attempt at this post went through...

  I've recently upgraded to an SSD and a new installation of won 8.1 (exactly the same thing I had on my old HDD) and now when I try to print from my Dell 5100cn I get the following error:

  Host of the print driver for applications has stopped working

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: splwow64.exe

  Application version: 6.3.9600.17480

  Application timestamp: 545871c 1

  Fault Module name: dlpsc51r.dll

  Fault Module Version: 0.3.1281.4200

  Fault Module Timestamp: 4324d 269

  Exception code: c0000005

  Exception offset: 000000000000cd 87

  OS version: 6.3.9600.2.0.0.768.101

  Locale ID: 1033

  Information additional 1: 1 has 72

  More information 2: 1a7236b9868d6b38d3fd37b43ff05b06

  Information additional 3: 269 b

  Additional information 4: 269b7fc9d660b4191041ae78f0745b83

  For the life of me I can't figure out what I'm doing wrong... The printer still works fine if I swap back to my old HDD so I know its something I do (or not do)... I tried to figure this out all day and have installed several drivers in normal mode and compatibility without result.

  When I open devices and printers on the old drive HARD the printer name reads "Dell Laser Printer 5100cn PCL6" but when I check the devices and printers on my new SSD it reads "Dell Printer 5100cn PS"... So, I know that I do not want to install the same as I have done before and I can't understand what I installed... I use a Toshiba Satillite P75 A7200 if that matters...

  Help, please

  Hi Roydub83,

  Thanks for writing on the Dell Community Forum.

  Please uninstall all the printer driver on the system installed for Dell Laser 5100cn printer and then install the driver on Windows 8 using this link http://dell.to/1ETptNA. Install in compatibility mode if the installation does not engage.

  Answer please if you have any other questions.

  Have a nice day ahead.

• Satellite A500-1GL: it is advisable to remove the battery when you use the network

  I know this is a silly question but its actually something I know not so thought I would ask.

  I almost always plug my laptop into the supply line (satellite a500 1gl)
  I was wondering have you actually keep the battery installed even when using the electrical network.
  Or is it really advisable to remove the battery when you use the network?
  I didn't know if the battery should always be in place.
  Thanks for your help
  Torti

  Hello

  A few years ago it was recommended to remove the battery of the laptop if the AC adapter is plugged. What keeps the constant charge battery
  New age of batteries are better you can leave the battery in the Bay it s ok and it should not affect the performance

  However, sooner or later each battery would die it s only a matter of time, you know

• Using the HARD drive of a Tecra A4 as a for another laptop external HARD drive.

  I have a Toshiba Tecra A4. I want to use the HARD drive as a second hard drive to another laptop, but it seemed to me that the HDD in Tecra A4 has a special bond that does not fit in a standard externel HDD-Bay. Anyone know how I can use the HARD Tecra A4 drive as an external HARD drive?

  Subquestion: is it not possible to use a 2.5 "HARD drive normal in a Toshiba Tecra A4?

  Hello

  AFAIK Tecra A4 has 2.5 inch HDD inside. But the HARD drive has another connector HARD drive that you can remove. The HARD drive is placed in the HARD drive chassis and fixed with four screws. Remove the screw and the connector. Be very carefully and take it easy.

  After that you can use in other laptops.

• Remote Desktop for Mac will not use the printer driver

  On an iMac with Lion 10.7.3, I try to get an Epson ReadyPrint T20 - TM to use the Epson driver when it is connected to our server Windows 2008 R2 with DRC 2.1.1 but it keeps using a HP Color Laser Jet 2800 Series PS we have not the HP printer and I need some features in the Epson driver.

  I installed the printer on the server and removed several times without alteration. When 'Use a printer connected to the Mac' is selected in the preferences of the DRC the printer is a printer that is redirected, but the use of the driver of HP. Printing from Mac works with all the features.
  On the server, we have 3 installed roles, file, desktop Services to remote and Web server (IIS) Services
  We have tried to map the printer with an EPSONRedirect.INF file that contains the following:
  ; EPSONRedirect.INF

  ; Printer mapping file for drivers side client-side Server

  [Printers]

  "EPSON TM - T20" = "EPSON TM - T20 ReceiptJ4"
  No idea how we can fix this?
  [Transferred to the Windows forum by moderator]

  Hello

  I suggest you to post the question on the following link:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/thread/f07d7d4a-BCCC-4c23-8BF3-c81d31937484/

• I want to print the username in each page using the network printer. To identify which print this page.

  Print the computer name on each page using a network printing

  Dear all,
  Help on this issue. I want to print the username in each page using the network printer. To identify which print this page.

  As much as I know that you can't do this with every printed page, but you can use the separation pages (* .sep) and have this printed on a single page at the beginning of each print job.

  Tip: Put the separator page in the folder % WINDIR%\System32.

  See here: http://support.microsoft.com/kb/102712

  .Sep file is just a text document, the following prints only the user name:

  Name $LUser $N
  $E

  John

• Discover which applications that uses the network

  Hello!

  I recently discovered that my computer sends tons of data thrown my internet connection every 20 minutes by analyzing the network graph in the Task Manager.

  Is there any application Windows witch allows me to find what applications uses the network. For example, the process and the use of the network?

  You can try this site:

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb795532.aspx

  There are some tools that might help you.

• Host of the print driver for 32 bit applications has stopped working (v515w) - cannot print in addition to the test pages

  My printer is Dell v515w Red

  Currently, I can only test pages print.  When I try to print from any other application, I get this error-

  Host of the print driver for 32 bit applications has stopped working

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: splwow64.exe

  Application version: 6.1.7600.16385

  Application timestamp: 4a5bd3ca

  Fault Module name: ntdll.dll

  Fault Module Version: 6.1.7600.16559

  Timestamp of Module error: 4ba9b802

  Exception code: c0000710

  Exception offset: 000000000006e3f9

  OS version: 6.1.7600.2.0.0.768.3

  Locale ID: 1033

  Additional information 1: 3edf

  More information 2: 3edf0feac74021b377b392a0115d74c0

  Additional information 3: bf41

  Additional information 4: bf41409fee27240aa0d3cd0ee9bc9fa9

  I've updated through microsoft and dell and some solutions.

  What is a dell problem or a problem of microsoft?

  My features are-

  Studio Dell XPS 1645, Win7 64 bit, IE8

  extacy1375,

  Unplug the printer.

  Uninstall the printer.

  Restart your computer. Make sure that the printer is deleted. Driver Manual printer removal

  Download 64-bit Vista drivers and save them on your desktop. Install the drivers for Vista 64 bit in compatibility mode.

  Links to the 64 bit Vista drivers are to...

  Wireless printer Dell V515w All In One Printer - owners (RED) wire

  Rick

• Cannot get location using the network provider

  Hi all

  My android app uses the location updates and works very well on the Android device. I wore my application on 10 BB, I can get updates of location using GPS_PROVIDER but do not NETWORK_PROVIDER. Anyone who manages to find the location using the network provider?

  Kind regards

  Nishant Shah

  According to the taking in charge:

  "It is a known problem that is being fixed with internal development."

• Host of the print driver for 32 bit applications has stopped working. Why?

  Host of the print driver for 32-bit applications has stopped working msg apear when giving the print on my RICOH printer N/W command. Why?

  * Operating system: Windows 7 64 bit * 32 bits of MS office 2010 * Print driver 64 bit PCL6 * Adobe Acrobat Reader x.

  SPLWOW64.exe event name: BEX64

  Please give a solution.

  Hello

  (1) did you do changes on the computer before this problem?
  (2) what are the types of documents that you are not able to print?
  (3) is the issue limited only with the Microsoft Office program?
   
  Step 1: Test the problem to the boot to check if it is a question of software conflict. A clean boot to check if startup item or services to third-party application is causing this issue.
  Try to install the updates in clean boot mode, and check if the problem still persists.
  You can read the following article to put the computer in a clean boot:
  http://support.Microsoft.com/kb/929135
  Note: After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.
  Step 2: Download printer driver last OEM
   
  Step 3: Uninstall printer related software l and features

  un) go Panel.

  (b) select Uninstall a program under programs and features.

  (c) click on printer drivers , and then click Uninstall.

  (d) wait until the process of uninstallation is completed, restart the computer.

   
  Step 4: printer installation and driver when prompted then only connect printer and check if it helps.
   
  If the question is limited to Microsoft Office, I suggest to return the items listed below and check to see if they help.

  How to troubleshoot print failures in Word 2010, Word 2007 and Word 2003?

  http://support.Microsoft.com/kb/826845

  How to solve printing problems in Word 2010, Word 2007 or Word 2003?

  http://support.Microsoft.com/kb/826862

  Hope this information helps.