I can read two-channel USB-6008 using THE Signal Express?

Similar Questions

• You can access time capsule iTunes library using the Airport express

  Hello

  I I have an Apple Airport express and listen to music from my iTunes library on my MacBook Pro. I have just bought a Time Capsule from Apple and saved my MacBook to this. I would like to listen to the music of my Time Capsule, as is always on.

  Anyone know if this is possible?

  Thank you

  Unfortunately, your new Time Capsule is not an iTunes server. This is, in itself, it can not stream audio files stored on the internal hard drive to an AirPort Express or Apple TV point. You will still need to use iTunes on your MBP to do. You would just point to the media library on your Time Capsule in the case of iTunes. (Note: However, if your iTunes library is stored on the Time Capsule as a Time Machine backup, this no longer works.) "It will take a stand-alone copy of the one that was on your MacBook.)

• Can I have the user enter a variable that will be used to Signal Express?

  We seek to use the Signal Express to collect data of analog sensors and load cells. We would like the user to be able to enter a variable that the program Express of Signal can act on. Is it possible within Signal Express?

  Hello

  When you select 'Change destination', it will fill with all stage settings that are supported for the given control used.  Not all the steps or step settings are able to be adjusted when the operator mode.  That is why you were only able to bind controls to step DAQmx Acquire and filter (they are only available to bind in your configuration steps settings).  The forumla node is not able to reference an entry of order of the operator interface. You must manually configure the formula tab of configuration step for that particular step.

  I would recommend if you want that more customized the user interface and approach programming using an application development environment.  Signal Express is ideal for acquisition of signals and perform analysis and basic treatment, but if you want more functionality LabVIEW would be a better option.

• Using of two NI USB-6008

  Hello

  I would like to know if its possible to use two devices acquisition of data USB-6008 in the same VI.

  I suppose it should be possible and should not affect my sampling rate, I'm good?

  Thank you

  You are right. You can use two devices in the same vi (infact many devices) as long as you manage tasks for devices separately if you want different sampling rate.

• HP workspace: can users save files directly on their Elite x 3 HP or on a USB key using the workspace?

  Hey everybody,

  Can users save files directly on their Elite x 3 HP or on a USB key using the workspace?

  Thank you

  Bill

  Yes. Users can save files between workspace of HP and the HP Elite x 3 device or on a USB key.

• How can I configure Messenger to record my conversations, record them and send them to a location I can read and save when you use Messenger on other computers than mine?

  How can I configure Messenger to record my conversations, record them and send them to a location I can read and save when you use Messenger on other computers than mine?

  original title: Live Messenger

  Hi Nicoliani,

  To start saving your Conversations in Windows Live Messenger

  1. connect to your window Live Messenger and click on 'Tools' or click on your display name.

  2. scroll down to "Options", a window should appear. When he does very well and click on "Messages".

  3. locate "historical Message". After that, check the box that says, "automatically keep a history of my conversations.

  4. below that you will see "save my conversations in this folder."

  5. to side of her you will see change, make sure that it is a file that you can access and watch later.

  6. If you are on a network, you can save it in a directory which you have access, or you can save it to a location and later mailed to yourself and access it later.

  Where chats are saved is given below.

  1. to access the Conversations go to the start bar and click My Documents. Then click on "my received files."

  2. There should be a folder with your name on it. Click the folder, then you will be in another folder called history. Continue

  3. by clicking on the folder, now you should see all your saved conversations.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I'm trying to connect two monitors and one using the hdmi port and the other vga. How can I get the pc to recognize the two?

  Original title: multiple monitors

  I'm trying to connect two monitors and one using the hdmi port and the other vga. How can I get the pc to recognize the two?

  Hi David,

  Thanks for posting your query on the Microsoft Community.

  I suggest you refer to the Microsoft Help Articles below and try the steps mentioned.

  Check out the link:

  http://Windows.Microsoft.com/en-in/Windows-8/how-connect-multiple-monitors#1TC=T1

  You can also check:

  http://Windows.Microsoft.com/en-in/Windows-8/get-best-display-monitor

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Im trying to fill the network so my ps2 connections can use the signal wireless to my laptop running vista Basic. When I click to bridge, I get a message saying that I need at least 2 internet connections. is this in any way about this?

  Im trying to fill the network so my ps2 connections can use the signal wireless to my laptop running vista Basic. When I click to bridge, I get a message saying that I need at least 2 internet connections. is this in any way about this?

  Hi Jer9009,

  Welcome to the Microsoft answers site.

  ·         Could you give the exact error code or error number you get?

  To connect multiple computers, install a network adapter in each and run a network CAT5 cabling to connect each one to a hub (and thus the other.) The computer that will serve as a transition will have a standard network card for wired and a wireless network adapter that will connect to the wireless (WAP) access point or gateway on the second network.

  A network bridge is software or hardware that connects two networks or more so that they can communicate. You can create only a single bridge network on a computer, but a bridge can handle any number of network connections.

  For more information, see the link: create a network bridge:http://windows.microsoft.com/en-US/windows-vista/Create-a-network-bridge

  Add a connection to a network bridge: http://windows.microsoft.com/en-us/windows-vista/Add-a-connection-to-a-network-bridge

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• is it possible to buy two licenses CC photographer using the same e-mail account?

  is it possible to buy two licenses CC photographer using the same e-mail account?

  You can buy only one subscription to an electronic ID/address adobe which can be activated on both computers.

  Kind regards

  Hervé Khare

• Can I combine three variables by using the action of the Expression in advanced Actions?

  I have an assessment (contains 9 questions) in my project that contains 3 lessons. Each question relates to a specific lesson. I want to break the score on lessons on my Quiz slide, instead of display the total score for all of the evaluation of the results, so that the learner knows what activities require additional study. I created a variable to contain the points marked on each question and assigning points to this variable using "QuizInfoLastPointsScored".

  

  I know what are the questions focus on what lesson:

  Lesson 1: questions 1-3

  Lesson 2: questions 4 to 6

  Lesson 3: questions 7 to 9

  
  

  However, I don't know how to add 3 variables together to get the total for this lesson. The action of "Expression" only allows me to combine the 2 variables:

  
  

  How can I add a third variable in the action "Expression"?

  I thought you don't need three totals: a global and two partial totals. The latter will be calculated not the subtotals. There is no need to first put the score in a variable separate at all. I used only the variables for totals of the three. You will calculate only the total world, and who could be with a single statement, no need for two to all:

  Expression v_total = v_total + cpQuizInfoLastSlidePointScored

  
  

  
  

• How and where can I find my Macbook Pro using the model number

  How and where can I find my Macbook Pro "using the MODEL number" NOT the serial NUMBER please...

  Hello world:

  I would like to know more about my MacbookPro using model # is if there is a website or a program that I can type my model # so she'll tell me more on my computer...?

  http://www.EveryMac.com

• Can not do a screen shot using the command shift 4. Unable to capture the States. I restart the Mac.

  Can not do a screen shot using the command shift 4. Unable to capture the States. I restart the Mac.

  It is to capture a piece of the element you want to screenshot, make a fire using full-screen control + 3

• How can I register my product without using the online process?

  How can I register my product without using the online process?

  He scored finally got.

• I can't type capital letters c, d, e and the sign of the pond (think they are right?) using a shift key. I can type these letters if I use the caps lock. Do I need a new keyboard?

  I can't type capital letters c, d, e and the sign of the pond (think they are right?) using a shift key. I can type these letters if I use the caps lock. Do I need a new keyboard?

  Optionally, before buying a new property you can try to give you a good cleaning.  They are pretty easy to disassemble and reassembe, all you need is a screwdriver

• I can stream movies on my PC using the desktop PC monitor. But when I unplug the monitor and use a PC to TV HDMI cable I get the video but the audio now

  . Video streaming

  I can stream movies on my PC using the desktop PC monitor. But when I unplug the monitor and use a PC to TV HDMI cable I get the video but the audio now... Suggestions?

  Thanks for the file INF. I ck'ed for driver updates and I have the latest drivers installed.  I got the sound working on the TV by hanging the audio output of the PC to the entrance of the TV with the HDMI cable in place for video. It's the simplest solution to this problem, so I took it.

  By the way, I have a Dell 620 with windows 7.