I can restore the search for style XP to Windows 7?

I am a network admin and use Windows 7 since its release.

I find the search function of Windows 7 is almost useless.

I do not believe in indexing, because if I was a pirate index would be the first thing I would like to acquire, so I could decide if the PC contains a different type of value to steal.

Without indexing, search is slow as _ and can't find things that I can check are in the car you are looking for. Maybe it's the same with indexing turned on?

Overall, I can't say bad things about 7. For the most part only of good things.

but the search function in 7 absolutely sucks.

How can I go back looking for style XP?

How can I go back looking for style XP?

It is not possible.

But you can use this tool:

http://www.Mythicsoft.com/page.aspx?type=agentransack&page=home

André

"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

Tags: Windows

Similar Questions

  • We can define the search for a SQR paths (like-i for SQC)

    Is it possible to define paths of research for a SQR?
    IE at run time, we would like the system to search the SQR in c:\sqr1\ if not found then look in c:\sqr2\ and so on... until the c:\sqr4\

    This time, this function exists ONLY for the SQC via the i - flag
    (ex: c:\ps_home\bin\sqr\ora\BINW\sqrw.exe c:\xrfwin.sqr - ic: \sqr1\; c:\sqr2; c:\sqr3; c:\sqr4\)


    We would like to be able to do this THROUGH:

    (1) the Scheduler process. (Where we have implemented? in PSPRCS.) CFG? Don't know how)

    (2) command line. (We can not find any indicator that could meet this need)


    Note: We have learned a few tricks (SQRPATH, psprcs file, @FILE flag, PSSQR) but not able to get an any of them cleared out.

    This delay our development and it's quite crucial for us.
    Any ideas or advice would be VERY APPRECIATED!

    Thank you

    Kelvin says:
    ...
    (1) the Scheduler process. (Where we have implemented? in PSPRCS.) CFG? Don't know how)

    From the link below, search for "SQR Section" and you will find PSSQR1, PSSQR2, PSSQR3 and PSSQR4 for sqr search paths
    http://docs.Oracle.com/CD/E28394_01/pt852pbh1/Eng/psbooks/TPRs/book.htm?file=TPRs/htm/tprs16.htm#H3002

    (2) command line. (We can not find any indicator that could meet this need)

    I'm not aware of any equivalent for the command line, but most of the time, you know where it was stored during the manual execution. You could get more in the Peoplebooks:
    http://docs.Oracle.com/CD/E28394_01/pt852pbh1/Eng/psbooks/TSQL/book.htm?file=TSQL/htm/tsql08.htm#H3019
    If you don't find anything, and the cmd line is really necessary, you could probably write your own script (.bat or .cmd) looking for the QAS that you could give as parameter.

    Nicolas.

    Published by: Gasparotto N on 24 may 2012 22:10

  • While trying to install windows xp on my computer, it displays the search for previous versions of windows and then locks the system.

    XP installation problem

    while trying to install windows xp on my computer (processor i3), she shows looking for previous versions of windows and then crashes the system. So please give me a solution

    Hi deva_reddy,

    Looks like you are trying to do a repair of windows xp installation.

    You use a windows installation cd?

    Refer to the link below for the procedure to install windows XP using different methods.

    http://support.Microsoft.com/kb/978307

    Hope the helpfu.

  • The system update tool is to continue the search for updates on my Windows 7 sp1

    Windows Update is continue verification of updates & system update tool is to continue looking for updates on my Windows 7. Help, please!

    Value 'Never find updates' automatic updates and reboot.

    Best regards, VZ

  • Blue screen when you perform the search for live TV in Windows Media Center on the new Lenovo A700

    I just got my new Lenovo IdeaCenter A700 yesterday and have been busy setting up.  The computer is equipped with a built-in TV Tuner and I tried to put in place the TV on it so I could watch TV on my computer.  I have RCN for cable and a cable TV that gets first plugged into the decoder and then I plug the cable to the TV - so I just plugged this cable on my computer instead of the TV.

    I used the following Web site to set up using Windows Media Center - http://www.howtogeek.com/howto/9166/learning-windows-7-setup-live-tv-in-windows-media-center/.  After that I put in my zip code he sought the power of the signal or something and then I got a blue screen.  To restart the computer the information below has been MS. error message This happened to me twice.

    Anyone know how to fix this? Or otherwise, I just want to use my computer to watch TV on, and if I can do this other method other than Windows Media Center free I am happy to do.

    Please let me know if you need more information.

    ************

    Signature of the problem:
    Problem event name: BlueScreen
    OS version: 6.1.7600.2.0.0.768.3
    Locale ID: 1033

    More information about the problem:
    BCCode: 4A
    BCP1: 0000000076E5FF2A
    BCP2: 0000000000000002
    BCP3: 0000000000000000
    BCP4: FFFFF8800AADECA0
    OS version: 6_1_7600
    Service Pack: 0_0
    Product: 768_1

    Files helping to describe the problem:
    C:\Windows\Minidump\102110-15849-01.dmp
    C:\Users\fennis\AppData\Local\Temp\WER-36941-0.SysData.XML

    Read our privacy statement online:
      http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

    If the online privacy statement is not available, please read our offline privacy statement:
    C:\Windows\System32\en-US\erofflps.txt

    This seems to be resolved now... it was maybe an update of windows, like when I rebooted my machine it updated automatically and after that he worked all of a sudden!

    Anyway, now it shows a black screen and no sound for all channels, but that is a different problem... and I'll look in to that.

    Thanks for your help.

  • You can restore the photos of the recently deleted items folder? I have an iCloud back for my iPad that I restored it that would have photos on them but then sync with my current iCloud files. Can I restore the last backup of iCloud?

    You can restore the photos of the recently deleted items folder? I have an iCloud back for my iPad that I restored it that would have photos on them but then sync with my current iCloud files. Can I restore the last backup of iCloud?

    The backup to iCloud for an iPad does not include items that are already in iCloud, your iCloud stream library and my photos are not included in the backup to iCloud.

  • I have a new time capsule airport. How to limit the search for who can use the time capsule backup process?

    I have a new time capsule airport. How to limit the search for who can use the time capsule backup process?

    Set a password to disk... disk tab in the utility... and just give to those you want to use the TC...

  • My computer (explorer.exe) continues the search for readers/records.

    Hi experts, I need help on my PC.
    After working with my PC for several hours and minutes when I click/Open 'My Computer' it continues the search for my hard drives and folders in libraries, favorite & computer. He just continues to research and does not display my partition/HARD drive. http://i793.Photobucket.com/albums/yy217/aznix2020/Untitled.PNG
    However, its not freezing or hang up and I can always open my drives/folders by using the command run and after a while it will work fine again.
    Is not a serious problem at the moment because it works well after a while but it's a hassle.
    Also im wondering if this is my drive display relationships safely remove HARD in the options in the task bar. Although the option remove appear for less than a month before I encountered this problem.
    My PC is win7 32 bit sp1. Thanks in advance.

    This problem can be caused by a video driver obsolete or damaged, file system on your PC can be damaged or do not correspond with other files and certain applications or services that are running on your computer may be responsible for Windows Explorer to stop working.

    Refer to the following suggestion and check the status of the issue.

    Install the following update and check if that helps

    Windows Explorer may hang in Windows 7 or in Windows Server 2008 R2.

    https://Support2.Microsoft.com/kb/2515325?WA=wsignin1.0

    If the problem persists, see the suggestions mentioned in the following and check the status of the issue

    Error: Windows Explorer has stopped working.

    http://support.Microsoft.com/kb/2694911

    Note: Before you perform an upgrade in-place, you must be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

    Please let us know if you need assistance.

  • Stop the search for the missing files from LabVIEW

    Is there a way to prevent the search for lack of screws LabVIEW? If I load a VI and one of its dependencies is spent, I want LabVIEW to fail immediately and to wonder where is the file.

    What version of LabVIEW are you using?

    Just hit ignore.  It stops to load files that it cannot find and load than it can.

  • I want to uninstall a toolbar that has been the result of the search for something specific

    Hello

    I want to uninstall a toolbar that has been the result of the search for printable piano music.
    I uninstalled the stuff accompanying this research but I can't get rid of the toolbar. Can I just download an another toolbar as C.NET or what?

    I have a Dell dimension 4700 desktop, XP and I have ' yet to learn through this forum help and everyone.

    Thank you

    Gina Davis

    Original title: how to uninstall toolbat Inbox

    (IE unknown version)

    Hello

    Tools are what bar you referring? That's a browser or another program?


    Method 1:
    Run this fixit to remove it completely.

    http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

    Method 2:
    You can uninstall the toolbar by following the steps below:
    a. open your Internet browser.
    b. click on 'Tools' then 'Add-ons' in IE; Click on "Tools" and "Manage Add-ons."
    c. find the add-on "Toolbar" in the list of available modules.
    d. remove the add-on toolbar in Internet Explorer, select the toolbar and click "disable".
    If you want to remove the toolbar, you can do this by uninstalling it in Add or remove programs.


    Also visit these links to learn more:
    http://TechNet.Microsoft.com/en-us/magazine/dd364987.aspx
  • How can I disable search for it invdexing?

    How can I disable search for it invdexing?

    Click on Start - Control Panel (and select Classic view in the left pane), select Administrative Tools , then Services. Scroll down for Search of Windows, do a right click, choose Properties.

    The value of starting off. Click on stop.

  • New error causing the Windows Update Agent 7.6.7600.320 80246002 during the search for updates

    I use Windows 7 64-bit with Service Pack 1. Windows Update worked fine until the Windows Update Agent is automatically updated to 7.6.7600.320 in August 2014. Now, when Windows Update tries to search for updates, it reports "Windows could not search for updates" and indicates that the 80246002 error code was received.

    [UPDATE]  Since posting this query, I think I solved my problem by following the instructions described on the page "Update tool of the system for Windows 7 for x 64-based Systems (KB947821) [may 2014]."   I downloaded the file (Windows6 1 - KB947821 - v33 - x 64.msu) and then let it settle. He describes himself as "Fix for Windows (KB947821)".  The installation took awhile, with a lot of disk activity.  When he finally finished, I rebooted my machine and tried an update of Windows. It seems to work fine; He even found a significant update that I then installed successfully.  So apparently my problem the hotfix for Windows (KB947821) provided the solution.

    [UPDATE 2]  After seeing the messages on the change the DNS to resolve the problem, I thought I would add the following information where it is necessary:

    • I use the 64-bit version of Internet Explorer 11 and confirmed it works in 64-bit mode by inspecting the user agent of the browser.  You can check the user agent of your browser by visiting http://user-agent.me/
    • My Internet Protocol properties are set to 'Obtain DNS server address automatically'.  It works with my wireless router, and I've never tried to change it.

    [UPDATE 3]  After thinking I was safe, after doing several searches for updates, the returned 80246002 problem on my machine!  I rebooted my machine and my wireless router, but it did not help.  So, I advanced and tried the DNS thing: I changed the favorite 8.8.8.8 DNS server and another server DNS 8.8.4.4 and then rebooted.  Search on Windows Update is now successfully!  I am humbled and grateful!

    In my case, I got the window update 80246002 error code after I uninstalled KB2982791 according to the https://technet.microsoft.com/library/security/MS14-045 and then tried the updates.  I have nothing clears the error (ipconfig/flushdns, rename the folder C:\Windows\SoftwareDistribution, a few MS Fix, etc...).  KB2993651 being the replacement update I was trying to download and install, I decided to manually download the update from the windows update (http://catalog.update.microsoft.com/v7/site/Search.aspx?q=KB2993651) catalog.  After you downloaded and installed KB2993651, I rebooted the PC and then I was able to check Windows updates again without entering the 80246002 error code.

  • Windows 7 continues the search for updates

    Recently, I have restored my laptop to factory settings, and after you install the service pack 1 update, this does not block the search for updates.  I tried everything on this site but without success.  Help, please.  Thank you.

    The installation of the plant is the worst possible Windows, that no tech fan would go because of the bloatware and installation utility factory duplicate that interfere with better integrated in the operating system versions.  Corruption as it is so just wait until you make a clean reinstall Windows 7 .

    If you want to try to wrestle with the factory install, so first thing I "d to recover some lost performance is Clean Up Factory Bloatware. "  It also checks and fix the integrity of the installation itself, which is not only limited but damaged by bloatware.

    Then, if the problem run the troubleshooting Windows Update - Microsoft Windows Help tool

    Then, try to Reset Windows Update components.

    Finally, as a last resort, run the System Update tool .

    Let us know how it goes and if there are any questions or problems.

  • e-mail Outlook 2013 index is not in the search for a window 7

    Dear all

    Research of a window does not work correctly.
    My emails are not yet indexed and watch not when he search with the search for a window
    Please help me what I can do to fix this
    Thanks in advance
    RAM kishanso

    http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-files/a-guide-to-using-Windows-search-two-alternatives/2ec3ce7e-e7e3-4EBF-85f8-1263ecdc99bc

  • Using synonyms in the search for name

    Hello

    I try to use synonyms in an oracle namesearch. Set up a seqarch name as in the second example described in the developer's guide to the oracle text to http://download.oracle.com/docs/cd/E18283_01/text.112/e16594/search.htm application

    Now the name, for I am looking can hold one '&', for example 'B & V '.

    I would like to find this text when I enter "B & V", B & V' or 'B and V.

    I found a thread on how to set up a thesaurus with synonyms for '&' and 'and' to 'and' and ampersand or special characters

    Now I'm wondering how to combine this.

    Thanks for the help in advance,
    Dirk

    Your change was correct and it works. For reserved words in the braces enclosing aims to tell Oracle Text as text rather than apply the special meaning they have as reserved words. Since "und" is not a reserved word, it didn't need to be escaped by placing braces. When you set "&", then "und" synonymously as you did the search for 'B und V' correctly found "B and V, as in the modified below demo. In this particular case, the search might work without applying the format_string, but you need to keep it in the query so that it is applied to these values in need, for example, if you searched for "B & V' or 'B & V".

    SCOTT@orcl_11gR2> create table emp (
      2        first_name    varchar2(30),
      3        middle_name   varchar2(30),
      4        last_name     varchar2(30),
      5        email            varchar2(30),
      6        phone            varchar2(30));
    
    Table created.
    
    SCOTT@orcl_11gR2> -- added row of data:
    SCOTT@orcl_11gR2> set define off
    SCOTT@orcl_11gR2> insert into emp values
      2  ('Jane', 'Doe', 'B & V', '[email protected]', '321-654-0987');
    
    1 row created.
    
    SCOTT@orcl_11gR2>
    SCOTT@orcl_11gR2> create or replace procedure empuds_proc
      2       (rid in rowid, tlob in out nocopy clob) is
      3         tag varchar2(30);
      4         phone varchar2(30);
      5  begin
      6    for c1 in (select FIRST_NAME, MIDDLE_NAME, LAST_NAME, EMAIL, PHONE
      7              from emp
      8              where rowid = rid)
      9    loop
     10         tag :='';
     11         dbms_lob.writeappend(tlob, length(tag), tag);
     12         if (c1.EMAIL is not null) then
     13             dbms_lob.writeappend(tlob, length(c1.EMAIL), c1.EMAIL);
     14         end if;
     15         tag :='';
     16         dbms_lob.writeappend(tlob, length(tag), tag);
     17         tag :='';
     18         dbms_lob.writeappend(tlob, length(tag), tag);
     19         if (c1.PHONE is not null) then
     20           phone := nvl(REGEXP_SUBSTR(c1.PHONE, '\d\d\d\d($|\s)'), ' ');
     21           dbms_lob.writeappend(tlob, length(phone), phone);
     22         end if;
     23         tag :='';
     24         dbms_lob.writeappend(tlob, length(tag), tag);
     25         tag :='';
     26         dbms_lob.writeappend(tlob, length(tag), tag);
     27         if (c1.FIRST_NAME is not null) then
     28           dbms_lob.writeappend(tlob, length(c1.FIRST_NAME), c1.FIRST_NAME);
     29           dbms_lob.writeappend(tlob, length(' '), ' ');
     30         end if;
     31         if (c1.MIDDLE_NAME is not null) then
     32           dbms_lob.writeappend(tlob, length(c1.MIDDLE_NAME), c1.MIDDLE_NAME);
     33           dbms_lob.writeappend(tlob, length(' '), ' ');
     34         end if;
     35         if (c1.LAST_NAME is not null) then
     36           dbms_lob.writeappend(tlob, length(c1.LAST_NAME), c1.LAST_NAME);
     37         end if;
     38         tag :='';
     39         dbms_lob.writeappend(tlob, length(tag), tag);
     40       end loop;
     41    end;
     42  /
    
    Procedure created.
    
    SCOTT@orcl_11gR2> show errors
    No errors.
    SCOTT@orcl_11gR2> begin
      2    ctx_ddl.create_preference('empuds', 'user_datastore');
      3    ctx_ddl.set_attribute('empuds', 'procedure', 'empuds_proc');
      4    ctx_ddl.set_attribute('empuds', 'output_type', 'CLOB');
      5  end;
      6  /
    
    PL/SQL procedure successfully completed.
    
    SCOTT@orcl_11gR2> begin
      2    ctx_ddl.create_section_group('namegroup', 'BASIC_SECTION_GROUP');
      3    ctx_ddl.add_ndata_section('namegroup', 'fullname', 'fullname');
      4    ctx_ddl.add_ndata_section('namegroup', 'phone', 'phone');
      5    ctx_ddl.add_ndata_section('namegroup', 'email', 'email');
      6  end;
      7  /
    
    PL/SQL procedure successfully completed.
    
    SCOTT@orcl_11gR2> begin
      2    ctx_thes.create_thesaurus ('nicknames');
      3    ctx_thes.create_relation ('nicknames', 'John', 'syn', 'Jon');
      4  end;
      5  /
    
    PL/SQL procedure successfully completed.
    
    SCOTT@orcl_11gR2>
    SCOTT@orcl_11gR2> -- added synonyms to thesaurus:
    SCOTT@orcl_11gR2> begin
      2    ctx_thes.create_relation ('nicknames', '&', 'syn', 'and');
      3    ctx_thes.create_relation ('nicknames', '&', 'syn', 'und');
      4  end;
      5  /
    
    PL/SQL procedure successfully completed.
    
    SCOTT@orcl_11gR2>
    SCOTT@orcl_11gR2> begin
      2       ctx_ddl.create_preference('NDATA_WL', 'BASIC_WORDLIST');
      3       ctx_ddl.set_attribute('NDATA_WL', 'NDATA_ALTERNATE_SPELLING', 'FALSE');
      4       ctx_ddl.set_attribute('NDATA_WL', 'NDATA_BASE_LETTER', 'TRUE');
      5       ctx_ddl.set_attribute('NDATA_WL', 'NDATA_THESAURUS', 'NICKNAMES');
      6       ctx_ddl.set_attribute('NDATA_WL', 'NDATA_JOIN_PARTICLES',
      7        'de:di:la:da:el:del:qi:abd:los:la:dos:do:an:li:yi:yu:van:jon:un:sai:ben:al');
      8  end;
      9  /
    
    PL/SQL procedure successfully completed.
    
    SCOTT@orcl_11gR2> create index name_idx on emp (first_name)
      2  indextype is ctxsys.context
      3  parameters
      4    ('datastore  empuds
      5        section    group namegroup
      6        wordlist   ndata_wl');
    
    Index created.
    
    SCOTT@orcl_11gR2>
    SCOTT@orcl_11gR2> -- added function to format search string:
    SCOTT@orcl_11gR2> create or replace function format_string
      2    (p_string in varchar2)
      3    return varchar2
      4  as
      5    v_string     varchar2 (32767) := ' ' || p_string || ' ';
      6  begin
      7    -- add extra spaces around ampersand:
      8    v_string := replace (v_string, '&', ' & ');
      9    -- remove duplciate spaces:
     10    while instr (v_string, '  ') > 0
     11    loop
     12        v_string := replace (v_string, '  ', ' ');
     13    end loop;
     14    -- add { and } around each reserved word:
     15    for r in
     16        (select keyword,
     17             ' ' || keyword || ' ' keyword2
     18         from      v$reserved_words)
     19    loop
     20        v_string := replace (upper (v_string), r.keyword2, ' {' || r.keyword || '} ');
     21    end loop;
     22    return ltrim (rtrim (v_string));
     23  end format_string;
     24  /
    
    Function created.
    
    SCOTT@orcl_11gR2> show errors
    No errors.
    SCOTT@orcl_11gR2> -- example of usage of function:
    SCOTT@orcl_11gR2> select format_string ('B und V') from dual;
    
    FORMAT_STRING('BUNDV')
    --------------------------------------------------------------------------------
    B UND V
    
    1 row selected.
    
    SCOTT@orcl_11gR2>
    SCOTT@orcl_11gR2> -- query modified to apply foramt_string function to :name variable:
    SCOTT@orcl_11gR2> var name varchar2(80);
    SCOTT@orcl_11gR2> exec :name := 'B und V'
    
    PL/SQL procedure successfully completed.
    
    SCOTT@orcl_11gR2> column first_name  format a10
    SCOTT@orcl_11gR2> column middle_name format a11
    SCOTT@orcl_11gR2> column last_name   format a9
    SCOTT@orcl_11gR2> column phone          format a12
    SCOTT@orcl_11gR2> column email          format a22
    SCOTT@orcl_11gR2> select first_name, middle_name, last_name, phone, email, scr
      2  from   (select /*+ FIRST_ROWS */
      3                first_name, middle_name, last_name, phone, email, score(1) scr
      4            from   emp
      5            where  contains
      6                  (first_name,
      7                   'ndata (phone,'       || format_string (:name) || ') OR
      8                 ndata (email,'       || format_string (:name) || ') OR
      9                 ndata (fullname,' || format_string (:name) || ')',
     10                   1) > 0
     11            order  by score (1) desc)
     12  where  rownum <= 10;
    
    FIRST_NAME MIDDLE_NAME LAST_NAME PHONE        EMAIL                         SCR
    ---------- ----------- --------- ------------ ---------------------- ----------
    Jane       Doe         B & V     321-654-0987 [email protected]           97
    
    1 row selected.
    
    SCOTT@orcl_11gR2>
    

Maybe you are looking for

  • Satellite A30: What kind of chip is the Bios

    Hey all!I have an A30 equipped with a BIOS of bricks. My Question: It has a jumper for activating BootBlock, or a combination of keys. My screen stays black and common combinations do not work.Another Question: what kind of chip is the bios of my lap

  • Satellite L305-S5919 - Desktop is a black screen

    My computer is Satellite L305-S5919. Whenever I boot, the screen is coming Black. Istill see the homepage and the loading bar, but the office is coming as a black screen. I have control of the mouse and that's all. There are solutions to this problem

  • Speaker Bluetooth pairing problem Gen 4 ATV

    I have a 4 Gen AppleTV. Bluetooth pairing seems very delicate/sporadic. I can get it to pair with my Jabra headset move most of the time, but it does not connect with my Harmon Kardon Soundsticks speakers wireless (bluetooth). All my other Apple prod

  • connect blue tooth of poor quality with a dongle

    I tried two bluetooth dongles and have poor reception (unusable) when linking to my jawbone speakers and my hearing. These two connect with excellent quality to my s3 galaxy phone. I have a Dell Latitude E6420 using Windows 7 Pro and a 64-bit operati

  • X 300 partial screen flicker and solid colored lines

    Hi all.  Just opened my X 300 tonight to find the lower left quadrant of the screen flashes and some colored in the upper quadrant, left-right lines.  Half right of the screen is visible but pixelated.  Anyone know if it's fixable?  Cowards, inverter