I can see only the last fax received in my PC and not all of them using an Officejet Pro 8600 Plus

Similar Questions

• All-in-one printer, HP Officejet Pro 8600 Plus will not print the image in the logo of the company

  I have a Mac the OSX Lion version 10.7.3 (11 d 50) I recently installed this printer. I printed the other documents in color without problem.

  Now, I'm trying to print an invoice with my company logo. The X in the logo is an image that has different shades of blue, but it prints other items on the invoice that are blue. It also correctly print the watermark in blue.

  Any suggestions?

  Thank you for responding!

  It turns out that I had to change my color matching print settings to make it work. I went under correspondence of colors and changed the option provider corresponding to ColorSync.

  This automatically replaced by the profile glossy color Brochure instead of paper simply. It's a shame as this used toner and does not allow you to print a copy of the project.

  I tried a couple of the other profiles, but so far they use as much toner, or does not print the logo. I was subjected to time constraints, so I had to stop experimentation, but once this project is completed, I will try the other profiles to see if they work.

• Web sites are to lie on the side twice their normal width so I can see only the left half of a site unless I go to view "full screen"; ideas?

  Whenever I use Firefox the page so that I can see only the left half of the some site; that is half of the info useful page (the rest is cut) poster on the half right of my screen so that half left of my screen right bottom of the site. By using the maximize / restore does nothing. If I swap the display full screen, I see everything well, but of course I lose my toolbars. I installed the latest version of Firefox with no joy. I looked for a function of setting page nothing is done. I thought that time would fix it as it is something that has already happened, but was temporary. Other browsers work fine. I thought to uninstall then reinstall but I do not want to lose my favorites etc I don't have to. Thanks for your help in advance; I hope that this hike makes some sense.
  See you soon.

  This problem may be caused by the extension of the toolbar of Babylon 1.1.8

  See:

  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

• HI, how can I scan a picture and only the witout the rest. On a HP Officejet Pro 8600 Plus?

  HI, how can I scan a picture and only the witout the rest. On a HP Officejet Pro 8600 Plus?

  When I scan I got my photo and all white for the rest of the screen

  It has no function of machine harvest in the 8600 software. To get the exact size, you will need to manually set the size for the scans that you do. You can find the setting by clicking on the blue link to advanced settings in the first scan window. Will take you to a place that will allow you to change the size of the scanning area. Hope that helps.

• OfficeJet Pro 8600 Plus fried by storm - how can I removed the ink cartridges

  A storm on the last week my OfficeJet Pro 8600 Plus feeding dish. The printer is irretrievably economic so I ordered a new printer.

  Without power, the transport of ink cartridge is stuck in extreme right position where it is impossible to remove the four ink cartridges relatively new. Ink is not cheap... would like to be able to recover the disabled printer ink cartridges but cannot understand how the cart release.

  Any sugguestions would be appreciated.

  In the end from the deceased by removving Assembly ADF/scanner printer ink cartridges. This provided access from the top to the distribution of ink stuck.  T10 Torx driver required to remove all.

  The new printer will not accept the cartridges retrieved when installing printer... had to use the "setup" cartridges in the box with the new printer.

  After you configure the new printer, however, I've been able to 'Set up' cartridges for almost new XL cartridges that I had recovered from my old printer.

• HP Officejet Pro 8600 Plus: HP Officejet 8600 does not scan to computer more - after having moved from the House

  Equipment:

  HP Officejet Pro 8600 more

  MacBook Air mid 2011

  Mac OS X Lion 10.7.5

  ASUS router DSL - N16 (new)

  I moved home and brought my computer and printer with me. I chose a new access provider and sent the new router.

  My old House my computer and the printer/scanner worked fine. Now set up at the new House and I can print but it won't scan. The computer and peripheral HP are connected to the router. I uninstalled all the HP software and reinstalled. On the front of the printer if I select Scan of the computer he says not 'found computer.... ' Make sure that the feature is enabled"using the HP utility. But in the HP utility there is not the option "Scan to Computer" more. I used to be able to scan to the computer to the printer, and I used to have a scanning tab in system preferences / print and scan - but not more!

  Details of what I tried:

  1. Uninstalled HP software.
  2. System preferences / Print & Scan - removed all printers.
  3. On the front of the printer: you click Network and disconnected.
  4. Off, computer, printer and router.
  5. Tour of router on. The printer is turned on.
  6. Used the wireless configuration wizard.
  7. Chose my router - "Found WPS router".
  8. The router WPS button is pressed. 'Network connection' 'successful connection' (n.b. left wireless live 'Off').
  9. Turned computer on - check the connection to the router OK.
  10. System preferences / print and scan - Add printer. He sees my printer - I select this one.
  11. Option to download and install the software of Apple-selected.
  12. Printer appears in Print & Scan-Idle / green spot. There is a print tab and a scanning tab.
  13. Click on the power levels: "Information not available". Click the HP utility: "unable to communicate with the device selected. Try to print: "the printer is not connected.
  1. Go to support.hp.com/gb-en/drivers - type in the printer model.
  2. Download the installation software "HP Officejet Pro driver software and full functionality" version 12.23.0. Save the dmg file.
  3. HP download and install the wizard downloads files on computer. Click on dmg download, double click on HP Installer.app.
  4. Click the HP Installer dialog box. Ignored HP ePrint offer.
  5. "Select the device you want to install" - no device is listed. Click on «my device is not listed...» "and"continue ".
  6. Select model device drivers - 8600 network / wireless Officejet Pro. Installation options: checked HP recommended software and additional software.
  7. Software installed with success, but still need to configure the device. Press to continue.
  8. Device not shown yet. Add device manually, using the IP address of the printer. Printer is displayed.
  9. 'Add the Print Queue' box - must add the printer to the system by using the "add a printer".
  10. Click IP in the toolbar. Protocol: HP Jetdirect - outlet. Enter the IP address of the printer. "Print using" field shows my device. 'Add '.
  11. Back to the installer - congratulations! Successfully installed.
  12. Utility HP ok - prints ok.
  13. On the front of the printer: select Scan / scan to computer: «no Found computer...» Make sure that the feature is enabled. Mac OS X: open utility HP. Under scan settings, click Scan of the computer, and then make sure Enable Scan to computer is selected. »
  14. In the HP utility, there is no "Analysis settings" or "Scan to Computer". There is "scan to E-mail and"Scan to Network".
  15. In the system preferences / print and scan - it doesn't have the printing tab and the tab analysis (see 12 above)
  16. Check the built-in Web server. Wireless status is connected. On the scanning tab I can Webscan to computer (but only 1 page at a time - not good for multi-page documents!)
  17. Try Apple Image capture - no devices specified in the list of devices.

  Hello

  First, make sure you have the latest firmware installed as follows:

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-8600-plus-e-all-in-one-printer-series---N911/4322915/model/4323647/document/c02919168/

  Then, try the following:

  1. Of the printer, click on the right arrow / left and press the ion of the configuration of the printer.
  2. Select Network Configuration.
  3. Select direct Wireless Configuration.
  4. Ensure the Direct wireless is enabled and take one step of his password if such a value.
  5. Click on the WiFi icon from your Mac and connect to the SSID 8600 spirit "live / Print" in its name.
  6. Go to System Preferences > print and scan and click on the plus sign to add the printer - you see it listed as Hello via the direct wireless connection?

  Please let me know the results, if it not listed as Hello with Direct wireless, which clearly show that the new router interrupts the multicast connection, this is the same as the connection through a different router.

  On your screenshot, it seems that your router do not transfer packets to multicast to the need...

• OfficeJet Pro 8600 Plus: cannot remove the pop-up windows deleted printer HP Pavilion p6-2014

  Hello

  I read the corrective action of 24/09/15 to HP Community@Felix_B to remove my HP printer previous (see the info solution reference below). He has worked to eliminate a group of print job corrupted. However, the pop-ups started continue. The two pop-ups State "there was a problem starting C:\Program HP HP Officejet Pro 8600\bin\HPStatusBL.dll. The specified module could not be found.  Can you please help me remove?
  
  Thank you-Chuck

  Re:

  Solution! Re: Unable to remove my printer
  Options
  24/09/2015-13:32
  Welcome to the community of HP @Felix_B,.

  Hello
  File Exploer type %appdata%\Microsoft\Windows\Start menu Startup into the address bar and press ENTER.
  Delete the shortcut to monitor alerts for Non-Existing printer ink and the error should appear is no longer.
  
  Kind regards
  Shlomi

• HP Officejet Pro 8600 Plus does not connect through the Device Manager but will connect bij Win7.

  I have a HP Officejet Pro 8600 Plus that works very well with some computers connected via ethernet.

  On a new computer with Windows 7 Ultimate edition, HP Device Manager can't find the printer, even when I give IP address.

  When I try to add a new printer network in Windows (add printer) windows detects the printer less than a second.

  I need the hp Device Manager configuration so I can use all the options off the officejet.

  Problem solved.

  The printer has a fixed IP address and the customer got his IP by DHCP. By dhcp, dns suffix has been changed so the printer dns suffix and the client does not mach.

  Now the printer receives its IP address by the dhcp server. The dhcp server always gives the same address to the printer.

• How to set the Date and time on my HP Officejet Pro 8600 Plus?

  I have a HP OfficeJet Pro 8600 Plus, and I would like to know, how can I implement the time stamp that is under my printer display screen continually Jan 00 00 00:00 a.

  Thank you

  @misslady,

  HP has gone green, here's the guide you're looking for.

• HP Officejet Pro 8600 Plus the Scanner Software

  Hello

  I'm a big fan of HP products.  My last several printers, scanners and computers were all HP.

  I recently bought the HP Officejet Pro 8600 Plus to replace an older machine with similar features (ADF, duplex, etc.).  The previous machine was also an HP printer.

  The problem I encounter is that the software appears to have been downgraded.  The software on my previous machine had the ability to automatically analyze the photos laid on the flat bed scanner in individual jpg.  With the software on this computer, it seems that I need to manually crop each image.  The options for optimization of each picture, eliminating scratches, automatically adjust color, sharpness, etc. are all gone.

  I really miss these features.  I found that I had been using a "basic" version of the software.  I installed the full version and found it a little different, but it still lacks the automatic selection of the image and image tweaks I did this inveterate of.

  Is it possible to recover these options?

  Thank you

  -MrXmas

  What I found there are some good options based on their comments, I'm not sure if they will have all the features you're looking for, but...

  http://goo.GL/Czm1

  http://goo.GL/3KUR

  I would like to know if this is useful!

• HP Officejet Pro 8600 Plus: Scanner/Fax, printing of two black lines on documents

  When you use the document for scan, copy, fax feeder, etc. the document always ends with two vertical black lines in the middle of the page.  I read a few other posts similar to this and tried all the advice, and nothing seems to have worked.  So far I've tried: cleaning the machine reset, turn it off for a period of time and again, disconnect it from the power supply for five minutes and by him plugging plug (which were the advice given in other posts).  Thanks in advance!

  Hi @JHurkett.

  Welcome to the Forums of HP's Support. I understand that you found lines in the scans and faxes of the ADF. I would like to help.

  If please examine this message and try the steps that you have not already done so. HP Officejet Pro 8600 e-all-in-one and Photosmart 7520 e - all-in - One Printer Series - band vertical, lines, or streaks in the Copies, faxes, or scans

  If you have any questions, or if this does not resolve the problem, let me know.
  If it solves your problem, please click acceptable Solution. This will allow other people with the same problem the solution easily. If you want to say thank you, feel free to click on the laurels.

• How to change the language on a HP Officejet Pro 8600 Plus

  I got a new HP Officejet Pro 8600 Plus and chose inadvertently Russian rather than English language. How can I change it back to English? I read the other posts on this topic, but they were for different models of printers and the instructions don't work on my 8600.

  Hello

  Please watch the following video:

  http://www.YouTube.com/watch?v=giATn-Uu6Nk

  It will be useful.

• OfficeJet Pro 8600 Plus: HP Officejet Pro 8600 Plus - Can no longer print with my Mac

  I have been using a printer HP Officejet Pro 8600 Plus via my MacBook Pro (OS X Yosemite version 10.10.4) for about two years with no problems until recently.  Since a few days ago, I'm more able to print wireless, despite the fact that the printer is connected to the network.  Interestingly, the print queue reflects the print job completed, but pages do not print.  In my attempts to solve the problem, I have (i) restore factory settings and re-written information of network required on the printer; (ii) disconnected the printer and waited five minutes;  (iii) unplugged and reset the router. (iv) deleted and reinstalled the software and drivers printer on my laptop.  My laptop is in communication with the printer as evidenced by my ability to scan using HP Scan wireless, but I'm unable to print the document once it is scanned.  Finally, I am able to print the network settings Page in the menu of the printer, but not the printer web page... I get an error message saying 'the printer is busy. Try again later.  Any ideas to fix this frustrating problem would be greatly appreciated.  I apologize if my descriptions are not technically accurate because I am a novice when it comes to computers and networks.  Thanks a lot for your help.

  Thank you for your response and suggestions. I really appreciate it.  You beat me to the punch... only a few hours ago, I was able to get the printer working again... but I forgot to update my post.  As you recommended, I have reset the printing system, downloaded a new driver... hpprinterdriver3.1.dmg... added a new printer... restart the printer, my router and my laptop... and the printer from work once again from my Mac.  Yet once again, I appreciate your efforts... Bravo.

• Automatically create color PDF can not deposit Officejet Pro 8600 Plus

  I have an Officejet Pro 8600 Plus and an Apple OSX Yosemite iMac running. I installed the full software from the HP support site, and in particular the analysis of the HP is version 4.4.1 (21).

  I want to create a color PDF directly in a file on my computer to the scanner.

  If I select Save as PDF, I get a b & w image in a file that is automatically created.

  If I select print daily scan opens in HP Scan and I am able to create an image in color, but with additional steps.

  I looked at other similar topics in 2012 and 2013 and saw advice to change the mode in HP utility/Scan to computer/change Scan tasks/editing, but there is no option of color Mode.

  Finally, I figured this out. It CAN be done.

  Go to HP utility/Scan of the computer.

  Make sure that enable Scan to computer is checked.

  Select Edit analysis jobs

  Select Save as PDF/change

  In the presets drop-down, select generalist

  In the section move the items from the Finder, you can also specify the folder where the scans will be saved.

  Saved color, managed directly from the printer scans on my iMac. Sweet!

• Changing icons (or removal) on the Officejet Pro 8600 Plus touchscreen

  Is it possible to change the order of the icons on the Officejet Pro 8600 Plus touch screen? Because I do not use the fax feature, I would like to move the icon to fax to the second page. If not, is it possible to remove all the icons (like the Fax icon)? Thank you

  Sorry, there is no way to change the order of the icons or delete the icons on the display screen. I understand that you do not use this feature, but there are some cases that you decide to change your mind you over a period of time.

  If you have any other questions, feel free to ask.