I can see other computers on a network of peer to peer windows XP but cannot access their shared files and the shared printer.

Similar Questions

• Cannot see other computers on my network

  Santa brought me a new laptop for Christmas.  I'm now 4 laptop computers on a network.  two are Windows XP home and turn in XP Pro and it is Windows 7 starter.  I have everything in the same workgroup and put the new in this group as well.  Sometimes I can connect to others of my new machine, and sometimes I can't.  Not sure why.  Also, I have tried to share folders of the new machine, but cannot open them on other machines.  Of course, since I've not had much experience with 7 I have a bit of a problem to determine what to do next.  Can anyone help?

  Hi John-Ohio,

  Thanks for posting the question on the Microsoft Community. Thanks for giving me the opportunity to help you. I will guide you about the issue you are facing.

  I suggest you check out the link.

  Why can I not see other computers on my network?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-see-other-computers-on-my-network

  Reference:

  Start here to set up a home network in Windows 7.

  http://Windows.Microsoft.com/en-in/Windows7/start-here-to-set-up-a-home-network-in-Windows-7

  Set up a home network.

  http://Windows.Microsoft.com/en-in/Windows7/setting-up-a-home-network

  Join or create a workgroup.

  http://Windows.Microsoft.com/en-in/Windows7/join-or-create-a-workgroup

  In case you have questions about the Windows OS please post on Microsoft

  The Community Forum.

  Thank you.

• PC XP sees but cannot access Vista PC on network. Access is denied!

  I have 4 computers on a network.  The network is set up in a private capacity.  3 computers XP Home can meet and 1 PC Vista Home Premium and can share files between the computers XP 3.  The Vista PC can see other computers and can send files to them quite happy.

  However, when one of the XP computers trying to access the Vista computer I immediately get an error "\\VistaPC is not accessible.  You might not have permission to use this resource network etc etc.  Access is denied. "

  I turned on the discovery of the network, public folder sharing, file sharing and printer.

  Protected by password sharing and multimedia file sharing are turned off, but all shared folders on the Vista PC all have their set of permissions for everyone because I don't want to have to enter the username and password whenever I need access.

  LLTD is installed and Vista network map shows all devices and their correct connection; all wired through a Netgear router except 1 wireless XP.

  Help, please.  It drives me crazy!

  I only use the Windows Firewall and AVG Free anti-virus.

  Well, I finally solved my problem, but don't know what action it reached or if it was a combination of actions.  If anyone is interested, here's what I did.

  On the Vista machine, I edited sharing the folder Public, all subfolders and files to share fully.

  Checked the security settings for all of the public folders, subfolders and files, and then assign full control to all users.

  'Everybody' added as a user and allowed full control for this user.

  Restarted after each step but when even could not access shared folders on the Vista machine.

  In desperation I edited the registry; went to HKEY_LOCAL_MACHINE / SYSTEM / CurrentControlSet / Control / Lsa
  Change the value of a key called "restrictanonymous" to 0 instead of 1

  Quick restart and Hey Presto my network to work properly

  My network is secure and so I didn't bother reduce some apparent security settings.  Don't know if it's appropriate for everyone but it might give some clues.

  Good luck

• WRT160N - can't see other computers on the network

  I installed a new WRT160N and now I can't see other computers on my local network, but I can access the internet on each of them.

  Y at - it a setting that I need to change or what I need to use static IP instead of DHCP addresses?

  If you cannot ping the other computers on the network, then check your firewall settings or any other security software blocking the connection.

• Cannot see other computers on the network

  Am on XP SP3.
  When I go to network connections,
  Right-click on local area network
  Click Properties under the general tab,
  Click on install and click Service
  .. all I see is a list for a McAfee driver but nothing for Microsoft. I removed my computer some time ago with McAfee & he must have created problems that I can't see other computers on the network. Is there a Microsoft driver, I need to install and which will help to solve the problem of not seeing other computers on the network.

  On the general tab of the properties of your network connection to the LAN card, you should see a box under the heading "this connection uses the following items."  Most Windows XP configurations for home use have 4 entries in this box: Client for Microsoft Networks, QoS Packet Scheduler, file sharing and printers for Microsoft Networks, and Internet (TCP/IP) Protocol.

  If you don't have these, you need to install, even if you really need not the Scheduler of QoS packages.

  You seem to have got almost to the right place, but be aware that when you click on the button 'Install' in the box, you are given 3 choices: customer, Service and Protocol.  The "Client for Microsoft networks" is obviously a "customer." 'Internet (TCP/IP) Protocol' is a 'Protocol' and the other two are "Services".

  What elements you have installed?

• Why I see 2 other computers on my network?

  I noticed in my network that there are 2 other computers and mine, in a "working group", but I'm an end user and I'm not part of a working group. This is a very recent appearance. I couldn't find a way to determine why I see other computers in this working group, and I can't find information on the activation or deactivation of "working group" on my system. I connect via the wireless router for my Internet service provider, and it's a bit confusing to me.

  I had problems with slow browsers and I noticed in the performance monitoring that is spiking my CPU (dual core AMD 2 gig), and my use of memory (2 GB) is 50% or more almost constantly, but I can't see anything using resources in 'programs' or 'services '. I tried to eliminate all junk startup and uninstall all the frivolous programs. Of course, I'm still under a bunch of stuff, but I suspect that something is not right.

  All the comments about the browser of fortification and slow CPU and if so or not, this could have something to do with the working group that I see?

  Hello

  If your wireless connection is not secure, it could be neighbors connecting to your Internet connection.

  -------------------
  Of the weaker for wireless security, more strong capacity is.

  No security
  Switch Off SSID (even has No Security. SSID can be sniffed easily even if it is turned off)
  MAC Filtering___ (Band Aid if nothing else is available, MAC number can be easily Spoofed).
  WEP64___ (Easy, "Break" by knowledgeable people).
  WEP128___ (a little more difficult to activate, but "Piraté" too).
  -------------------
  The three above are not considered safe.
  Safe starts here at WPA.
  -------------------

  WPA-PSK__(Very Hard to Break).
  WPA-AES__(Not functionally Breakable)
  WPA2___ (not functionally breakable).

  Note 1: WPA - AES the current interpretation level entry of WPA2.

  Documentation of your devices (router wireless and computer wireless card) must indicate the type of security that is available with your wireless hardware.

  All devices MUST be set to the same level of security using the same password.
  Therefore, security must be set according to what is the best possible one of the wireless devices.

  I.e. even if most of your system may be able to be configured to the maximum with WPA2, but a device is able to be configured for maximum of the WEP Protocol, to the whole system must be configured to WEP.

  If you need more security and a device (such as a wireless card that can only do WEP) is now better security for the entire network, replace with a better device.

  Wireless Security - http://www.ezlan.net/Wireless_Security.html

• Cannot see other computers on the network of the office.

  I can't see other computers on the network from my office, but if I type in \\xxxxxxxxxxx I'm able to get on the other computers on the network. How can I have them automatically appear?

  I'm terribly sorry for wasting your time.

  I realized what the problem was. I've implemented the new computer exactly as the old, same name and everything. Come and find the computer name of the computer being the same as the old conflict and did not again see what was on the network.

  So the trick was unplug the old computer from the network.

• Cannot see other computers on my workgroup

  I wiped my computer "arizonahp" and did a fresh install of Windows 7 Ultimate 64 bit.  Everything works fine except that it cannot see other computers on my working group (all current running xp) and they know more see 'arizonahp '.  I clear my name of working group "yorklan" in my computer.  Previously, arizonahp was a vista machine and he could see and be seen.

  What could be the problem?
  Thank you
  Gary .net developer

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  In Windows 7, go to control panel > everything in Control Panel > network and sharing Center. Click on "change the advanced sharing settings. You don't want to use the residential group unless you have all Windows 7 machines. If you do and you want to use the homegroup, see Windows 7 Help & Support. Otherwise, in sharing advanced:

  Discovery of plug in the network
  Open the files and printers sharing
  Turn on the sharing section Public folder sharing
  Plug the password protected sharing

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, running on Windows 7 sharing files and printer as above will take care of this for you. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

  Start > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  D. Si one or more of the computers on your network are XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. In Windows 7 I usually share the Desktop of the user and the Public directory. MS - MVP - Elephant Boy computers - don't panic!

• Web cam problem, using Skype... I can see other people, but they cannot see me...

  original title: web cam problem

  using Skype... I can see other people, but they cannot see me...

  Hello

  Be sure to contact the Skype Support like this might be a known issue and they might have the solution.
  There is also information and on the Skype Forums.

  Skype - Support
  https://support.Skype.com/en-us/

  Skype - Forums
  http://Forum.Skype.com/

  Also check with the manufacturer of the system, their drivers and documentation support online and ask
  their forums (if any).

  ============

  You will probably need to reload the drivers of the device and any camera control software.

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Other computers cannot access my shared folders

  I searched this topic and I read all the messages that seem to apply to me.  I still have the problem.  Maybe it's something unique to my setup.

  My computers:

  XP Pro (desktop computer)

  XP Home (laptop)

  Windows 7 (laptop)

  I shared the files back and forth on both XP machines successfully in the past to similar problems, but I've always been able to fix somehow.

  Once I added the Windows 7 laptop, for some reason, nobody can now access the XP Pro files.

  The XP machines are on the same workgroup.  File and printer sharing is enabled. The Windows Firewall is disabled.  I don't have Norton or any other firewall software.

  Each computer can see others, and any sharing of files can be used, except that the Win 7 or XP Home can access the XP Pro files.  They CAN be seen, but they are not accessible.

  HELP >?

  Hello

  The links mentioned below which can help you in the matter of fixing.

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  Why can't I connect to other computers?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-other-computers

  Ensure that all records and files to share have had rights in the properties.

  Hope this information helps.

• I can see, but cannot import/open some files.

  I bought Lightroom 6 a few weeks ago. Summer helping another photographer to edit and she a LR5, beloved. I was editing wedding photos and doing great, until I arrived at the reception. I have a few folders of them since a couple of times, I changed the SD cards. On the first record of them, I can click/Open the first 42 photos, and then the rest I can see but cannot click. What could be the problem? Thank you!

  What do you mean by "do not click on '?

  You see the pictures in the import?

  You import directly from the camera?

  Have you tried another way to import (i.e. the copy on the desktop with the browser and import from there?

  What is the file type and the source (camera), your operating system?

• I reinstalled adobe CS6. my other macs, I had a printer named 'Adobe PDF', that I could choose that as my printer and a dialogue box came up, I named the file and the location.  I can't figure out how to get this done on my new mac.  Help

  I reinstalled adobe CS6. my other macs, I had a printer named 'Adobe PDF', that I could choose that as my printer and a dialogue box came up, I named the file and the location.  I can't figure out how to get this done on my new mac.  Help

  There are two ways to create a PDF on a Mac:

  (1) you can use the default method, which is to choose file > print. Click on the PDF menu below on the left, then click on save as PDF. This lets you name and save the PDF file using the mechanism of OS X to create PDF files.

  (2) in the same menu, you can save in Adobe PDF format. It runs a script (a little slow) that lets choose you what PDF settings file you want to use. This is the Adobe-developed mechanism that replaces the old Virtual PDF printer.

• Cannot access any shared folder on the network of windows 7 Professional

  Hello

  I have a very strange problem.

  I have a home network with 4 computers.
  I can share files from any computer to the other.

  Recently, I bought a new laptop Lenovo E530 in with Windows 7 Professional installed on it.

  The problem is that I can't access any shared folder on my home network by '\\com-name '.

  I cannot yet access the folders on the computer that is shared from the inside, by specifying there name with the prefix "\".

  However, I can ping or even make remote desktop on other computers on my network.

  I can also access shared folders on my Windows 7 Professional from other computers.

  Looks like there is something wrong with the configuration of my OS from Windows 7 Professional blocking access to any shared folder on my network.

  I get the following error message:

  Windows cannot access \\comp-name

  Check the spelling of the name. Otherwise, it could...

  Error code: 0 x 80070035

  The network path was not found.

  I tried to use the button to diagnose, but without success.

  Help, please

  Dudi.

  Hello

  I suggest you try all the steps from the following link:

  Sharing of files and printers
  http://Windows.Microsoft.com/en-in/Windows/sharing-files-printers-help#sharing-files-and-printers=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  See also: File and printer sharing: frequently asked questions
  http://Windows.Microsoft.com/en-in/Windows7/file-and-printer-sharing-frequently-asked-questions

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• I don't understand why I can't login my account using mozilla but with googlechrome fb, I am able to do... Mozilla can load the fb site but cannot access my fb account... I'm uncomfortable with the use of mozilla as my browser... pls help thanks

  I don't understand why I can't login my account using mozilla but with googlechrome fb, I am able to do... Mozilla can load the fb site but cannot access my fb account... I'm uncomfortable with the use of mozilla as my browser... pls help thanks

  • "Clear the Cache": Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.
  • 'Delete Cookies' of sites that cause problems: Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > themes).

  • Makes no changes on the start safe mode window.

  See:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• Cisco ASA 8.4 (3) remote access VPN - client connects but cannot access inside the network

  I have problems to access the resources within the network when connecting with the Cisco VPN client for a version of 8.4 (3) operation of the IOS Cisco ASA 5510. I tried all new NAT 8.4 orders but cannot access the network interior. I can see traffic in newspapers when ping. I can only assume I have NAT evil or it's because the inside interface of the ASA is on the 24th of the same subnet as the network interior? Please see config below, any suggestion would be appreciated. I configured a VPN site to another in this same 5510 and it works well

  Thank you

  interface Ethernet0/0

  Speed 100

  full duplex

  nameif outside

  security-level 0

  IP x.x.x.x 255.255.255.240

  !

  interface Ethernet0/1

  Speed 100

  full duplex

  nameif inside

  security-level 100

  IP 10.88.10.254 255.255.255.0

  !

  interface Management0/0

  Shutdown

  nameif management

  security-level 0

  no ip address

  !

  permit same-security-traffic inter-interface

  permit same-security-traffic intra-interface

  network of the PAT_to_Outside_ClassA object

  10.88.0.0 subnet 255.255.0.0

  network of the PAT_to_Outside_ClassB object

  subnet 172.16.0.0 255.240.0.0

  network of the PAT_to_Outside_ClassC object

  Subnet 192.168.0.0 255.255.240.0

  network of the LocalNetwork object

  10.88.0.0 subnet 255.255.0.0

  network of the RemoteNetwork1 object

  Subnet 192.168.0.0 255.255.0.0

  network of the RemoteNetwork2 object

  172.16.10.0 subnet 255.255.255.0

  network of the RemoteNetwork3 object

  10.86.0.0 subnet 255.255.0.0

  network of the RemoteNetwork4 object

  10.250.1.0 subnet 255.255.255.0

  network of the NatExempt object

  10.88.10.0 subnet 255.255.255.0

  the Site_to_SiteVPN1 object-group network

  object-network 192.168.4.0 255.255.254.0

  object-network 172.16.10.0 255.255.255.0

  object-network 10.0.0.0 255.0.0.0

  outside_access_in deny ip extended access list a whole

  inside_access_in of access allowed any ip an extended list

  11 extended access-list allow ip 10.250.1.0 255.255.255.0 any

  outside_1_cryptomap to access extended list ip 10.88.0.0 255.255.0.0 allow object-group Site_to_SiteVPN1

  mask 10.250.1.1 - 10.250.1.254 255.255.255.0 IP local pool Admin_Pool

  NAT static NatExempt NatExempt of the source (indoor, outdoor)

  NAT (inside, outside) static source any any static destination RemoteNetwork4 RemoteNetwork4-route search

  NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork1 RemoteNetwork1

  NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork2 RemoteNetwork2

  NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork3 RemoteNetwork3

  NAT (inside, outside) static source LocalNetwork LocalNetwork static destination RemoteNetwork4 RemoteNetwork4-route search

  !

  network of the PAT_to_Outside_ClassA object

  NAT dynamic interface (indoor, outdoor)

  network of the PAT_to_Outside_ClassB object

  NAT dynamic interface (indoor, outdoor)

  network of the PAT_to_Outside_ClassC object

  NAT dynamic interface (indoor, outdoor)

  Access-group outside_access_in in interface outside

  inside_access_in access to the interface inside group

  Route outside 0.0.0.0 0.0.0.0 x.x.x.x 1

  dynamic-access-policy-registration DfltAccessPolicy

  Sysopt connection timewait

  Service resetoutside

  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac

  Crypto ipsec transform-set esp-ikev1 esp-md5-hmac bh-series

  Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

  Crypto-map dynamic dynmap 10 set pfs

  Crypto-map dynamic dynmap 10 set transform-set bh - set ikev1

  life together - the association of security crypto dynamic-map dynmap 10 28800 seconds

  Crypto-map dynamic dynmap 10 kilobytes of life together - the association of safety 4608000

  Crypto-map dynamic dynmap 10 the value reverse-road

  card crypto mymap 1 match address outside_1_cryptomap

  card crypto mymap 1 set counterpart x.x.x.x

  card crypto mymap 1 set transform-set ESP-AES-256-SHA ikev1

  card crypto mymap 86400 seconds, 1 lifetime of security association set

  map mymap 1 set security-association life crypto kilobytes 4608000

  map mymap 100-isakmp ipsec crypto dynamic dynmap

  mymap outside crypto map interface

  crypto isakmp identity address

  Crypto isakmp nat-traversal 30

  Crypto ikev1 allow outside

  IKEv1 crypto ipsec-over-tcp port 10000

  IKEv1 crypto policy 5

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 10

  preshared authentication

  3des encryption

  sha hash

  Group 1

  life 86400

  IKEv1 crypto policy 50

  preshared authentication

  the Encryption

  md5 hash

  Group 2

  life 86400

  IKEv1 crypto policy 60

  preshared authentication

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 70

  preshared authentication

  aes-256 encryption

  sha hash

  Group 1

  life 86400

  IKEv1 crypto policy 90

  preshared authentication

  aes encryption

  sha hash

  Group 2

  life 86400

  Telnet timeout 5

  Console timeout 0

  management-access inside

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  internal BACKDOORVPN group policy

  BACKDOORVPN group policy attributes

  value of VPN-filter 11

  Ikev1 VPN-tunnel-Protocol

  Split-tunnel-policy tunnelall

  BH.UK value by default-field

  type tunnel-group BACKDOORVPN remote access

  attributes global-tunnel-group BACKDOORVPN

  address pool Admin_Pool

  Group Policy - by default-BACKDOORVPN

  IPSec-attributes tunnel-group BACKDOORVPN

  IKEv1 pre-shared-key *.

  tunnel-group x.x.x.x type ipsec-l2l

  tunnel-group ipsec-attributes x.x.x.x

  IKEv1 pre-shared-key *.

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  Review the ip options

  !

  global service-policy global_policy

  Excellent.

  Evaluate the useful ticket.

  Thank you

  Rizwan James