I can start by backup boot CCC 10.6.8 Snow Leopard on a new imac to 2016

Similar Questions

• How can I move XP on Boot Camp partition in a virtual machine on a new iMac?

  Yesterday, I bought a new iMac to replace an iMac Core Duo older. I was running XP on Boot Camp partition and using Fusion to access. As the new iMac custom supports XP on Boot Camp partition, I want to use VMWae Fusion to run XP in a virtual machine on the new computer. Is there a way to get the current state of XP (with all the security and the SP3 updates) now on my Boot Camp partition, more than one virtual machine on the new computer?

  No offense intended... Have you even read the linked web page and or documentation of Paragon go virtual?

  In short, could start the Boot Camp partition natively, install and run Paragon go virtual to create a Virtual Machine in VMware Boot Camp partition and run the resulting Virtual Machine with VMware Fusion on the new Mac.

  Then you can do what you want with the old computer after deleting the partition Boot Camp with Boot Camp Assistant as you can't keep physical installation on the old system if your running a virtual copy of it on another system without purchasing another license from Microsoft.  Also, you will need to reactivate Windows XP and other software that follows what material it was initially installed on the virtual machine.

  Note: You can even create a Virtual Machine from the Boot Camp partition with VMware Fusion in two different ways, or even to use VMware vCenter Converter such as the use of virtual Paragon to go however I strongly recommend using Paragon go virtual methods due to what I consider a major flaw in the way they create the virtual hard disk when you use the command import on the Boot Camp partition and a rate higher failure by using the other methods/software VMware VMware compared to Paragon go virtual.  For the non-technical user Paragon go virtual is the best way to go IMO and the entire process usually takes less time, then the methods of VMware.

• Where can I find a downloadable update and secure (from Snow Leopard 10.6.8) for my office iMac?

  First of all, forgive me if I'm not on any computer jargon as you young people are.  And I don't know the details of the operation of the computer.  If possible, I just need simple answers or solutions to my need.  Terms like "segregation" and stuff like which are wasted on me.  I have an old desktop computer Apple iMac 2008 model.  Running Safari Version 5.1.10 (6534.59.10) - I love my Safari.  My computer and some sites that I try to access from time to time tell me that my server is obsolete.  I guess that means I need an upgrade.  About 6 months ago, I've upgraded to Snow Leopard 10.6.8 using a disc that I bought at the Apple store for some time ago.  Recently, I added all of the 6 GB of memory (live RAM) so I have enough memory to upgrade.

  I don't want to take a giant to El Capitan step and risk problems.  I know 10.7 Lion is no longer available, but perhaps Cougar 10.8 10.9 Maverick is somehow available for download.

  Download codes for 10.7 and 10.8 Mountain Lion Lion are available on the Apple Store online.

  If you need specifically Mavericks 10.9 or Yosemite 10.10, go into a physical Apple store and ask.

  Any upgrade of the operating system can cause problems. Back up your data and control your applications for compatibility first.

  (143319)

• How can I download and reinstall Adobe Photoshop elements 11?  I have a new iMac and all other software converted except Photoshop...

  I bought a new iMac Retna display and converted on my other software from my old iMac.  Most of all applications properly converted, however Adobe Photoshop elements 11 has just launched with an error indicating that we need to reinstall the application.  We have the original serial number but can't find a copy of 11 items on the Adobe site to download and reinstall.  Also, we don't find any contact information for same Adobe support if the messages in the forum of State we need to contact adobe customer service to resolve this problem.

  Please advise...

  Thank you

  Try this link:

  Products download Photoshop Elements | 10, 11, 12, 13>

• Why can I not print to CS5? Mac and Snow Leopard

  I can't print of CS5. I have a Canon Pro 9000 MKII, and all drivers are up to date. Whenever I need to print I have to close the image and then open it in CS4. I have an iMac under Snow Leopard and you can print from other programs.

  When I try to print from CS5, I get a dialog box (see table). If I click on the button 'Cancel' (the only option) print in the menu command is dimmed until I restart CS5. Any thoughts would be appreciated.

  

  It also fail after deleting photoshop preferences (command-option-shift waiting to launch), and then create a new file?

• Can I migrate my 3rd party applications on my mac pro with a new IMac with El Capitan Lion?

  I have many obsolete applications (Final Cut Pro 7 etc.) and applications 3rd party (Ms Office, final version of the project, etc.).  Can I move ALL of my external hard drive, which is a carbon copy of transfer cleaner everything on my mac pro?

  Yes, but they may be too old to work with El Capitan.  Look at RoaringApps.com to see if there is any inconsistency with these applications.

  

• Clean install of Snow Leopard backup Time Machine

  I'm swapping computers with my daughter. Both MacBooks, one with installed Yosemite, the other with Snow Leopard.

  We have backed up our files to separate external drives. Now, I have two related questions.

  1. If I understand correctly, we can now delete all the contents of the MacBook Snow Leopard and do a clean install of Yosemite or El Capitan before (or at the same time that?) from the TM backup data recovery. This hypothesis is correct?

  2. the content of the Snow Leopard system should be installed on the MacBook running Yosemite. What's the procedure here? In other words, it is possible erase the drive, and then start the computer into recovery mode is to have only the Time Machine backup?

  TIA.

  What to do before you sell or give away your Mac - Apple...

• How install/activate CS4 on a dual boot Snow Leopard and Lion?

  We have recently upgraded to a Dual Core iMac computer Lion. Many applications do not work on Lion, so we are partitioning & make a dual boot to run cs4 on Snow Leopard. Can we do this?

  Thank you

  GML-ann-arbor by performing the steps described in the error "Licensing has stopped working". Mac OS - http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html should solve your problems.  Please do not hesitate to reply to this thread if you have any questions about the steps listed in the document.

  Alternatively, you can work with our support team and let them know, you receive the error message, "Licensing has stopped working" and they work through the steps listed in the document with you.  For the best support, I recommend our chat support at http://adobe.ly/yxj0t6.  Our chat representatives can provide a personalized experience to solve the problem you described.

• Get "I/o Error" with the 0x8078002A error code when I start a backup.

  * Original title: IO Error Message - I am an amateur

  When I start a backup of my hard drive to my external hard drive, I get an error that reads "I/o Error" with the 0x8078002A error code.  I am a real novice.  I can do either fix it or work around this problem?

  Hello

  Welcome to the Microsoft community.

  Try the steps in these articles:

  Error message when you try to perform a full backup on a Windows Vista-based computer: "" the request could not be performed because of an i/o device error".
  http://support.Microsoft.com/kb/952272
  Note: It is applicable for Windows 7 as well.

  Perform a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

• How is used to start up of my iMac, Snow Leopard, from a backup HD external Firewire?

  I read about using Firewire to start a desktop computer is unresponsive.  I have OS x 10.6.8; 4 GB of ram with an external storage unit 1 t with a backup of the Snow Leopard.

  I want to erase the HD of an eMac which is disabled.  The power button is broken and a thread has been cut.  It was working fine when we had a power failure and would not come back.

  Found the answer to the search.

  ****

  HOW TO INSTALL FIREWIRE

  Matt Clifton

  October 23, 2007 12:15 AM

  in response to Kofta

  Solved

  Hi Kofta

  To use the firewire transfer mode, restart the iBook and when the screen goes black, hold down the T key on his keyboard. You should see a Firewire symbol on the screen after a few minutes. Connect the two computers with a Firewire cable, and you should see the iBook's hard drive mount on the desktop of your iMac. You can now copy your files everywhere.

  If the iMac is brand new and you want to copy your users, applications, and settings, you can use the automatic Migration Wizard that will be launched when you start the computer - or, you can run it at any time from the Applications/Utilities folder.

  Matt

• can I download a "boot drive" for HP Pavilion laptop g6, product #: B0N33PA #ABG?

  My laptop failed to update graphics card. I have tried reintalling and installation of different ways a few times with no success. I tried a roll on the last good parameter twice in a row, and since then it has gone from bad to worse.  Now once the computer has windows 7, I get the BSOD. That I can download or buy a boot disk, so I can start over?
  
  
  
  Name of product: notebook PC HP Pavilion g6
  
  Serial number: [redacted]
  
  Product number: B0N33PA #ABG

  Hello

  If you want to reload the operating system, here are some options.

  1. you can order a set of replacement recovery disks using the link below - it will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office).  They also recreate the original scores, including the recovery Partition - the cost varies a bit depending on where you live, but they are generally inexpensive.

  Order HP recovery disks.

  2 another option that you might consider is to create your own Windows 7 installation disc 'detail '.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the Disk Image correct ( this must be the same version that originally came with your laptop - it is listed as Windows 7 Home Premium 64 - bit ) from the link below and use an app like ImgBurn ( Note: you can deselect additional software during installation of ImgBurn offerings) to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  The source of the Windows Image is Digital River.

  Windows 7 Home Premium 64 bit SP1.

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  You may need, additional drivers and software are here.

  Best regards

  DP - K

• HP ENVY 20 d113w: power black screen turn off the HD does not connect drive CD can start to stop then + USB?

  I'm having the same problems... Screen, black power on... hard drive turn but I don't think there is a connection or not recognoised... CD starts and stops... PC will start and stop several times... activated in a dock hard drive & it works... tried to boot the pc with the external hard drive dock but no go... I don't think that the usb ports do not work... I checked the Cmos battery & it's ok... It is difficult to use the keyboard, because it is wireless and I don't know if it is a wireless sensor so that I can start with f11...  With broad back, I see a bit of light on the right (I think it's on the motherboard) that will flash on for a second and then on the road... Don't know how to check the graphics card or when he is on the back... I took it to office max and they said that it is probably a hardware problem & is not a software problem... Called HP and it is out of warranty so some help... I don't know here from here... I am concerned by the static method & son said, put a piece of aluminum foil... I am a 73 year old gram and could use some suggestions. Thank you

  Hi, thanks for taking your time to help me solve my problem of HP... I'll take all you have suggested and works with all this... You're an asset to the help of HP forum... aloha, becky

• Can I start again with time capsule 2 TB existing using an existing iMac and a new iMac.

  Trying to understand several iMacs and Time Capsule.  Can I save a 2 iMacs on my Time Capsule?  I am running AutoCAD LT 1015 on my new iMac, so far, I've not put back up on my Time Capsule.  I'm worried it might be a problem with the existing backup tutorial AutoCAD on the Time Capsule, interfering with the new version purchased.  Therefore, I wonder if I can remove the Time Capsule saved since the original iMac info and start back up both machines it again?

  I wonder if I can remove the Time Capsule saved since the original iMac info and start back up both machines it again?

  Yes you can. The way simplest and quickest way to accomplish what you want is clear the Time Capsule disk and then start over again with a new backup of a Mac. Then, once it's over, make a new backup of the other Mac.

  When the two Macs have saved for the first time, then both will continue back up automatically and gradually.

• How can I get a boot drive for windows vista

  How can I get a boot drive for windows vista

  Hello

  Here's how to do a startup, vista etc disc repair

  It is NOT a reinstall drive

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  How to reinstall Vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• what it means when your computer say-"your disc is a failure, start the backup process."?

  What it means exactly when your computer say-"your disc is a failure, start the backup process."? I know that's not good, but what is it? And that's something that I can fix with some instruction? Thank you, Brandi

  Hello

  If the message is correct, your hard drive is defective and must be replaced

  Your hard drive contains the operating system and all your files, photos, music, etc.

  Back up your data:

  make backups on an external hard drive or DVD

  see if this information helps you

  How to make a backup of your data (all Vista versions)

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc (Vista, full and professional company)

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup