I can't access my Virtual Machine when the internet connection is disabled...

Similar Questions

• How to access my virtual machines to the internet

  Hi all

  IAM running VMW 6.05 I 10 vm running inside my host is xp professional and I don't want to make RDP for this host because who will sign him out because that simply allow 1 rdp connection

  I need to access my two Linux Vms from the internet but don't know how preinstalled Vmware network is configured in Bridge mode they get internt via dsl on the host pc connection and its dsl mode is configured for PPPOE mode

  Thank you for your kind suggestion and solutions

  Thank you for your support

  Ashu

  The instructions are router very specific, so your mileage may vary.

  On my linksys router, I connect to the management interface, go to the Applications and Gaming tab to configure your port forwarding.

  There are a few choice integrated but you can go on the empty area and create your own.

  There, type in ssh_vm1, select the external port (it is the port you will use to connect to internet) and then inside port (SSH, it is 22), then IP address internal and check active.

  Do the same for the ssh_vm2, and you should be good to go.

  Now, you will need to find your external IP address as well to connect to the Web address that was assigned by your ISP.  You can reach a site, like ipchecking.com, and your address is in the right hand corner.

  -KjB

• is it possible to access the virtual machine when the network is down...

  Hello. He... IAM wondering is it possible that we can access the virtual machine when the network is down... (Because of power outages or when the fluctuations...) ................?

  Is it possible that I can configure my Virtual Machine...?

  Thank you and best regards...

  Indianmale...

  Hello

  Not really...

  For an environment hosted... If you can access the console of the host, you can always access the console of the virtual machine regardless of the State of the network outside of the console. VMware Workstation, Fusion and server all fall into this category.

  For ESXi/ESX... you need a host outside to access the console of the virtual machine. ESX and ESXi not displayed graphics or VMs of their consoles and management devices. So, you need an external machine that can run the vSphere Client or access to the virtual machine via RDP, VNC according to Guest OS involved or SSH.

  Best regards
  Edward L. Haletky
  VMware communities user moderator, VMware vExpert 2009, Analyst of DABCC
  ====
  Author of the books ' VMware vSphere (TM) and Virtual Infrastructure Security: ESX security and virtual environment ' available for pre-order now
  "VMWare ESX in the Enterprise Server: planning and securing virtualization servers, Copyright 2008 Pearson Education."
  SearchVMware Pro| Blue gears. Top virtualization security links| Security Round Table Podcast virtualization

• Hang a new virtual machine to the Internet

  All virtual machines that I downloaded connect to internet automatically when I their fire upwards. I downloaded a new machine virtual de VulnHub, specifically BrainPan2. It does not connect to the internet automatically even if it is supposed to. It's a vulnerable VM installation for security penetration testing. Now, I start my VM Kali, do a scan of the network and see all my computers. I'll start a VM unrelated, rerun the scan and check the other appears. Now I launch BrainPan, run the scan and nothing. I don't see on the scan.

  I read several guides associated with the virtual BrainPan2 of the internet machine, and everyone seems to be able to plug in and go. On the site of the BrainPan: 'import brainpan2.ova into your privileged hypervisor and configure the settings of the network to your needs. It will get an IP via DHCP, but it is recommended that run you to the breast of a NAT or visible by the host only operating system because it is vulnerable to attack."

  So, I put the virtual machine to run on NAT, connected by a bridge and also host. I can't detect the virtual machine by any means, it just is not auto-connect. And I can not connect and plug it as he did to hack.

  Does anyone have any suggestions?

  Hi John,.

  I'm using the regular VMware Fusion, not Fusion Pro. Fusion Pro is a virtual network editor that could help; I do not know. Just for fun, I downloaded BrainPan2 VM, and it worked only. Here are the steps I took:

  • Go to Brainpan: 2 ~ VulnHub
  • Click Download, which exposes the download link.
  • Download the file brainpan2.zip and unzip it.
  • Check the integrity of the downloaded file brainpan2.ova. In terminal, type 'openssl sha1', and then drag the file brainpan2.ova to the Terminal to fill in the full path of the brainpan2.ova file. Press return. Compare the sha1 hash in the terminal with one on the web page of the BrainPan. If they do not match, try again download.
  • Open VMware Fusion 8 and choose file-> import. Drag the file brainpan2.ova to the window. Click on the button continue and save the converted virtual machine. VMware Fusion will display a progress bar as it converts the file .ova. It took a few minutes on my Mac. Once the conversion is completed, you will see a window Finished.
  • Click Customize settings.
  • As part of the network card, select private to my Mac.
  • Start the virtual machine of BrainPan2. I don't bother to upgrade the hardware. You will see a login prompt, which I ignored. The BrainPan2 virtual machine will get an IP address from the DHCP server on VMware virtual network.

  Optional:

  • Open the BrainPan2.vmwarevm file in the Finder. Right-click to display the contents of the package. Open the vmware.log with a text editor like BBEdit or TextWrangler or even TextEdit. Search for "192.168" and you will find two entries to the VMware virtual networks. On my system, the private sector in my Mac network was vmnet1 to 192.168.166. * (I guess that the other network is the "share with my Mac" NAT.) He was appointed vmnet8.)
  • Close the log file.

  Instead of Kali Linux, I used one of my virtual machines in OS X, because it was very convenient. (My Kali Linux virtual machine are saved on an external drive). The virtual machine of OS X I used runs El Capitan, but any version of Mac OS X.

  • Take a snapshot of the OS X machine for two reasons: (1) to maintain its normal parameters and (2) because I don't trust the BrainPan2 virtual machine to not attack the OS X machine on the VLAN.
  • After the snapshot set network configuration of the virtual machine of the OS X private to my Mac, so that it is on the same virtual network as the virtual machine of BrainPan2.
  • Start Mac virtual machine. In the terminal, type "ifconfig en0" to see its IP address on the local network deprived of VMware. There are other ways to find the IP address, of course. My virtual machine to OS X has been awarded 192.168.166.129, so I figured though the virtual machine of BrainPan2 has been assigned to 192.168.166.128, which proved to be just.
  • If it is not already installed, download nmap or Zenmap or tools of everything that you need. A Kali Linux preinstalled.
  • Run a scan of the LAN ping. Example: ' nmap - sn 192.168.166. * "you should see the virtual switch to 192.168.x.1, your virtual Kali Linux or OS X machine and the virtual machine of BrainPan2 (mine was 192.168.166.128 as I suspected). The virtual machine BrainPan2 responds to the pings.
  • At this point, I ran a scan of port of the virtual machine of BrainPan2. Not wishing to spoil your fun, I will only say that I found the open ports on the BrainPan2 virtual machine.

  Don't forget to restore your virtual machine OS X (or Kali Linux) to the previous snapshot once you are done with BrainPan2, if nothing else, but to restore access to the Internet by moving out of virtual private LAN.

  I hope this helps. Please let us know if you are able to make it work. I hate to write solutions and then never discover what happens then.

• How can I remove a virtual machine from the mycomputer tab entry?

  I imported a virtual machine, and then moved the files and it has opened its new location and now I have two similar entries in the tab "MyComputer".  I'm under VMWorkstation 9.  How can I remove the old entry that opens is more because the files are not there more?

  I've found that a right click works indeed to remove the context menu when you are on the part of the library, but when I was in the My Computer tab, right click does not work.  I had my library closed shutter, but once I opened it and tried, I managed to solve the problem.  Thanks for the help.

• How can I register a virtual machine in the command line?

  I want to automate the registration of virtual machines in my VMWare Fusion.

  I have the vmx file. I can do this by using the command line?

  If not, how can I do it automatically?

  Thanks in advance.

  There are two main methods you can interact with the Virtual Machines outside user of VMware Fusion, the VIX API and vmrun interface and with the registration of these two commands are not supported with VMware Fusion (or VMware Workstation.* (* Non-exclussive VM)}.)  Recording controls are used primarily with vSphere.  VMware Server also supported recording orders.

  BTW, from a Machine virtual Finder by double-clicking on the file of configuration of Machine virtual package or .vmx if it is already running and is not created through the interface user of VMware Fusion, for example created in VMware Workstation VM and copied on a Mac, created manually or via a script solution.  Although she will then have to be manually recorded.  Registered/not registered in this context the Virtual Machine appears in the library of virtual machines VMware Fusion.

• Tecra M9 - can I access blocked HD password when the motherboard is dead?

  I dropped something heavy on the keyboard of my Tecra M9, which ruined the motherboard. I heard tell that I now can't access the data on my hard drive password protected (that is to say, it requires a password before starting upwards) because he needs the motherboard with which this password created. Can anyone say if this is indeed the case, and how to recover the data?

  Hello

  I think that you don t need the same motherboard in order to remove the HARD drive password.
  As Tom said, the HARD drive must be connected to the laptop that supports the BIOS where you can change or delete the HDD password.

  Here you can find a good post how to remove the known HARD drive password:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=219183

  the technician should do the same thing after the HARD drive has been connected to the motherboard.

• HA restarts the virtual machine if the storage connectivity is lost? If how is HA needs to be configured?

  We plan to go forward with a single dual-port HBA in each of our ESX servers. My concern is that the HBA becomes a single point of failure. HA supports restarting the virtual machine which lose connectivity to back-end storage. We did some testing and it does not appear that HA does not handle this. Even when 'enable us VM monitoring' the machine virtual do not restart on other ESX servers in the cluster that they hang just basically. I've read a few articles which seem to indicate that it should work, but I'm not able to get there. Any thoughts there?

  HA checks the availability of default ESX host. There is an option to monitor the heartbeats reviews, as well. Maybe this will do, but sometimes a guest still works for awhile even if the disk is lost. And as for a long time VMware tools send heartbeats...

  AWo

  VCP 3 & 4

  Author @ vmwire.net

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• networking of virtual machine of the internet does not work

  Hi, I am a beginner in Linux, my friend recommend install me VMware 6.0.3 for practice station. I choose the NAT configuration for my virtual machine, because I have a wireless card on my host (winxp-3 Pack), the period of investigation (get automatically from DHCP server) is 192.168.1.1 and 192.168.1.2 is my router to external internet gateway; I set virtual machine sitting in 192.168.88.0 segment. I tried to ping 192.168.1.2 - my physical network adapter, there is no road, looks like icmp knows only 192.168.88.2 (the VMware network adapter is 192.168.88.1), the gateway to the virtual network, but he does not know where to send the packets next hop.

  I put something else to let work?    The snapshot of the configuration is in the attachment.

  Thanks much for any help!

  No, it's quite normal. The gateway by default and DNS for the guest is the IP address of the host VMnet8 + 1 card.

  You can check this by opening the editor of virtual network within VMware Workstation, go to the NAT "tab" and look at the IP address of the gateway. You can also click "Edit", where you can configure (if necessary) DNS servers. But under normal circumstances, the default gateway setting here covers the host DNS queries. They will be transmitted to the DNS server that is configured on the host computer.

  Generally a server should not have multiple default gateways. For the host, it is the default gateway configured on the physical map (otherwise communication would be locked to himself). This is why the army should not have a default gateway on VMnet1 and VMnet8.

  NAT (VMnet8) allows you to communicate with the outside, the guest need default gateway to know where to send the packages which are not intended for the LAN VMnet8 (DNS queries for example). He uses this special IP

  AWo

  VCP / vEXPERT 2009

• An eFax can be sent to a machine on the internet?

  I am trying to send a fax with my 7510e to fax machine which is not on the internet.  Is this possible?

  Sorry,

  Now, I got your intention.

  You can fax using eFax to any fax machine, not only for faxes IP based...

  eFax servers must be able to communicate with any fax by using his phone number, its type regardkless.

• How to prevent the download of the images (when the internet connection is bad)

  In ancient times, it was possible to download only the text, no images, in order to speed up downloading of Web pages. Now I can't find the 'switch' to do this. My problem is that sometimes - when I'm on the (German) campaign - internet connection is so bad that the download takes a long time or fails completely.
  I use firefox with ubuntu 39.0...

  This option is no longer available in the standard options, but it still exists in the advanced configuration. 'Text only' value, enter "subject: config" in the URL bar, accept the warning, search for "permissions.default.image" and change the value of 1 (default) 2. To restore the display of images, even to change the value from 2 to 1.

• Computer crashes when the internet connection is detected

  Hello

  Need help with my dads pc, it is running Windows XP SP2 with IE7, the computer crashes as soon as an internet connection is detected, I have to remove the usb adapter WiFi to regain control of his PC, we use a model Linksy Cisco Modem ADSL2 + Daul-Band Wireless - N WAG320N, which is used for a certain number of laptops xbox and ps3 with no problems whatsoever.

  The system works very well without any problem until what the internet is detected and you must reset the computer of the tower base, we have tried a number of different usb adapters and a pci card but have the same result, a computer from freezing. I tried a number of different articles of this site, but all have failed, so it's my call for help to get my dads pc back on the internet, if I could get answers to the English plan as im not as good as I used to work on these systems.

  Help, please

  Kind regards

  Phil

  Hi Phil,

  1 have you made changes to your computer recently?

  2. you receive an error message when you try to connect to the Internet?

  3. what happens when you try to connect to the Internet by cable?

  I suggest you to follow the steps and check if it helps.

  Method 1:

  Step 1: Start in safe mode with network.

  To use a safe mode with network option, follow these steps:

  (a) restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.

  (b) use the arrow keys to choose Safe mode with networking in the Windows Advanced Options menu appears, and press ENTER.

  Step 2: PEd a clean boot and then check to see if it helps.

  How to configure Windows XP to start in a "clean boot" State

  Note: Make sure you perform the steps in How to configure Windows to use a Normal startup state

  to start your computer normally.

  Method 2: Update the network adapter and check if it helps.

  Updated a hardware driver that is not working properly

  Note: This link is applicable for Windows XP.

• Cannot connect when the internet connection is stable.

  When I want to open a session and enter the serial number - error - connect to the Internet to check the serial number. Although the Internet is stable. The firewall is disabled. Tried to reinstall the software - nothing helped.

  First Elements 12, victory 8.1

  Thank you.

  Serial number and activation support (non - CC) chat

  http://helpx.Adobe.com/x-productkb/global/Service1.html

• Is it possible that someone from Apple can activate my IPhone 5 c, when the lock screen, says "disabled: connect to iTunes?

  So I changed my password, took a NAP, and when I woke up, I couldn't remember the password. So now, my phone says "disabled: connect to iTunes '. Is it possible that someone from Apple can activate my phone (preferably without restoring to the factory)?

  Once disabled, it cannot be re-enabled in the restaurant if you plant.

  An Apple Store can do for you. but you can also just connect to a computer running iTunes and do it yourself.

  No matter how you do it, it will be restored.

• Can not see a virtual machine server connection mode

  Hello

  I'm testing VMWare View and I have a problem. I installed the ESX, vCenter and the view connection server. I have installed a virtual Windows XP machine and installed VMWare Tools + Agent and can not see this virtual machine when I want to create a "individual desktop" under "Desktop and pools. The connection to the vCenter works very well.

  Any ideas?

  Concerning

  Are the other machines available when you try to add an invidiaul machine?  I was wondering if you virtual center connectivity is working properly.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points