I can't access the https from Amazon normally parts

Similar Questions

• Can I access the guest from the server OS (virtual machine)?

  Hi all

  Can I access the guest from the server OS (virtual machine)? I mean, I would also like to start and discovers a guest OS (VM) directly in the server as in VMware Server 2.0. I would also like to see the graphic on the server management console to manage virtual machines.

  Or do I always have at least two computers? For example, the server ESXi without GUI / frontend access and the client with vCenter, vInfrastructure, blah-blah-blah,...?

  Thanks for the replies!

  Best regards

  Joao Araujo

  You will need the Client or another tool for access (RDP, SSH) a machine separate. ESXi is a very tiny BONES.

• Safe mode, so I can not access the Services via a Normal startup.

  Services, including Security Center, Windows Update, SuperFetch needs to be restarted but Vista freezes outside Mode safe, so I can't access the Services via a Normal startup.
  CHKDSK shows the hard drive has no bad points and the system works fine in Safe Mode.
  No idea how to deal to freeze shortly after startup? Even McAfee should be started. No idea what order to these programs.
  I've already eliminated at least 10 programs that were part of the start-up, after executing six miracle of Microsoft Diagnostics.

  * original title - problem of catch-22 with Vista freezes *.

  Hello

  1. don't you make changes to the computer until the problem occurred?

  I suggest you to try the steps below and check if it helps.

  Try to put your computer in a clean boot state, and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows XP:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Hope this information is useful.

• I installed Virtual PC with XP Mode on Windows 7 but I can't access the network from XP Mode.

  Network with virtual xp problem

  I installed virtual xp on Windows 7. but I can't access the virtual xp network. My LAN card manufacturer is realtek but virtual xp Device Manager indicates a intel NIC

  First, know what kind of NIC with your computer:

  1. click on Start > Control Panel > System > Device Manager .
  2. double-click on network adapters .

  Then, adjust the virtual machine:

  1. click on Start > all programs > Windows Virtual PC .
  2. right click Windows XP Mode and click settings .
  3. click on the network .
  4. Select the network card in the computer in the menu 1 adapter on the right side of the window.
  5. click on OK .

• Can't access the files from the HARD drive of any account on the windows computer 7

  Hello

  When I tried to connect my Western digital external hard drive to a 32-bit desktop P 3 with a Windows XP SP1, then this HARD drive is not detected. Then I tried to copy his WD driver ITS a USB Flash drive, then isntalled all the WD HARD drive was always plugged into my computer. After that, the HARD drive was identified by computer and appear in my computer. As I thought that this folder has been created by the installation of the driver, did not exist on my HARD drive before connected to the desktop computer.

  When I plugged my WD HDDagain to my laptop HP with Windows 7 SP1 64 bit and I tried open this folder, and then the main folder only opened without facing access denied, however, access to all of its subfolders, and the files inside it has been declined.

  In addition, althoguh the username admin Curernet "Mohammad" can open the folder of human "83f04ce083fb03083bb88e50", as shown in the screenshot above, it can not access all of the subfolders, files in the main folder, and to access, I will need to use the scecurity tab. Thus, it would be absolute nonsense, if I want to have access to all of the subfolders, I will need to use the security for each tab.

  How do I gain access to all of the subfolders with use of the Security tab once the time (i.e. as long as all subfolders are inside the main folder, then simply use the main folder security tab?

  

  As long as the current username "Mohammad" can open the folder of "83f04ce083fb03083bb88e50" man, "Mohammad" is so allowed system to have access to the main folder as shown in the screenshot above, then I think that the username 'Mohammad' will have to reach all subfolders as well. However, when you try to open any subfolder or file, then the current user 'Mohammad' name could not have access to all of the subfolders in the main folder and all subfolders or files opening gave me this error below (screenshots below)

  

  

  I tried to remove this main folder, however, each time, I found myself with a loop "you need permission SYSTEM to make changes to this file.

  

  Original title: file access denied

  Groan.  It is so easy to fix, and you should have gotten a lot better support now.  Surprisingly, the worst suggestion came directly from the "Microsoft Support Engineer" Reda Singh, his suggestion potentially compromising the security of your computer while doing absolutely nothing to solve the problem.  Fortunately, it seems like you didn't do something quite right and so the script was not run.

  First of all, let me explain why this difficult access occurs in the first place.  Originally, you had three 'users' granted access to training, SYSTEM, Administrators, and Mohammad.  SYSTEM allows Windows to read your disk, and retrieve things like its label.  It can also allow your antivirus software to access the drive.  Because this OPTION is enabled, Administrators is not accomplish anything, even if you are an administrator.  As long as this OPTION is enabled, this permission only works for programs, that you manually raised to run as administrator.  This leaves access to the drive depend on the last entry, Mohammad.  The problem is the SID behind Mohammad is only good on the computer, it was created, so if you connect this HARD drive on another computer, no access is allowed!  Enter the security on the other computer dialog box, you can either see something "could not read permissions" or you will see the SYSTEM, directorsand a third entry with a long series of numbers.  It's your first computer Mohammad , and it will not work on another computer.

  It is not surprising that you're facing this problem because you are using the drive on multiple computers, which is running XP that is not UAC.  Here's how to unlock a storage drive (in Windows 7) so that it can be normally accessed in any PC without any permissions problem:

  1. Press [Windows] (or click on the circles to start), and then type "user account control".
  2. In the search results, click on "change user account control settings."
  3. Drag the slider to "never notify".
  4. Click [OK] to confirm the changes and restart your computer.
  5. Open Windows Explorer, right-click on the affected drive, and then click Properties -> Security (tab)-> [Advanced]-> owner (tab)-> [change].
  6. You should be on a dialog box that asks what you want to change the owner.  Click on Administrators.
  7. Check Replace owner of subcontainers and objects, and click [OK].  Windows should start processing all the files on the disc.  This may take a few minutes.
  8. When it's done, click [OK] to close the property message and then close out of all other dialog boxes.
  9. In Windows Explorer, click the drive affected again, and then click Properties -> Security (tab)-> [Advanced]-> [edit permissions].
  10. Now in the dialog box Advanced security settings , click the button [delete] repeatedly to remove all permission entries.
  11. Add SYSTEM and grant full control.
      1. Click on [Add...].
      2. Type 'SYSTEM' and press [Enter].
      3. Check full control in the allow column and press [Enter].
  12. Add Administrators and grant full control.
  13. Add users and grant Full control.
  14. In the dialog box Advanced security settings , you should have three entrances of permissions: SYSTEM Administratorsand users, all granted full control.  Check "Replace all permissions of child object with permissions inheritable from this object" and click [OK].
  15. Click [Yes] to confirm the replacement of permissions.  Again, Windows start to process all files on the disk, which may take a few minutes.
  16. When he finishes, close to all the dialog boxes and check that all records are now accessible.  You may have to refresh (or close and reopen) explore to see the changes.
  17. Assuming that it worked, we will re-enable UAC to reduce the vulnerability of temporary security, that we created earlier.  Press [Windows] and then type 'user account control '.
  18. In the search results, click on "change user account control settings."
  19. Drag the slider to the position below the top (position #2, by default).
  20. Click [OK] and restart your computer.  Now, the files remain accessible.

  This should straighten the permissions of your disk storage so that you can use it again.  You may need to empty the trash on this drive after changing permissions.

  Don't do this procedure on your C:\ drive, it will seriously reduce the security of your Windows installation.  This is for the readers of storage only.  If you need access to a specific file that you created to C:\, you can safely do the steps above on this issue, but never on the C:\ drive itself.  Please note that when you perform this procedure on a folder instead of a hard drive, you will need to replace this step #10:

  10. now in the dialog box Advanced security settings , uncheck the box "Include permissions can be inherited from the parent to this object" and click [delete] to confirm.  If some permission entries remain, click [Remove] until they are all gone.

  The concept is the same in Windows Vista, even if the exact steps differ from the foregoing at least Windows 8.  In Windows 8, you must also disable UAC with a registry tweak because, unlike Windows 7, UAC remains on even when the value of "Never notify", giving rise to all sorts of problems in Explorer tries to work with file permissions.

  Oh and to answer one other question I saw you ask from the beginning: this folder of the .net Framework was created by .net Framework Installer.  He breaks all the rules and frustrating unpacks his junk everywhere where it feels like.  I got it decompress on a front SD card, making the installation would take forever.  After installing the .net Framework, you probably disconnected the drive before restarting your computer, so these files let me.  Or the installation crashed and started you again.  Meanwhile, installs the failure left its Temp files behind.  It was supposed to remove the folder when the installation is complete.  You can remove safely as the folder manually.

• Installation of Firefox caused FiddlerRoot must be installed and I can't access the https sites now through ANY borwser. My proxy is constantly changing.

  FiddlerRoot not only does not allow https certificates, but also resets my proxy once I put it back. This is consistent, and I worked through all the expertise "of solutions." This is a ridiculous piece of code and severely limited my internet capabilities.

  Hello, no authentic firefox downloads from mozilla.org does contain fiddlerroot - could have downloaded adware from a rogue site.

  go to the system control panel and uninstall programs such as BrowserSafeguard, BrowserSafe, backup or other software that seems suspicious and did not get intentionally installed by you.
  
  _{Reference: https://support.mozilla.org/en-US/questions/982532#answer-520145}

  afterwards, run a full scan of your system with security tools like the free version of malwarebytes & adwcleaner.

  Fix Firefox problems caused by malicious software

• How can I access the wifi from my application configuration?

  Hello

  My application requires Wifi 'on' and I want to help the user to go to the wifi configuration by clicking a button in my application.

  Perhaps, it is not possible, but is there a way to open the "wireless settings" directly from my application (by clicking on a button for example)?

  Thks

  You can run this application 'net_rim_wlan_wizard' by ApplicationManager.

• I can't access the sites from the address bar, help! :)

  Suggestions in the address bar went too. What should I do?

  Hello! You have already checked your add-ons and some settings (well thought!), but still:
  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click on the menu button , click Help , and then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• Cannot access the files from the internal hard drive that has been converted to drive external hard after the motherboard is dead

  I can't access the files from an internal hard drive that has been converted to drive external hard after the motherboard is dead. I think that my files are still there, as shown in the volume of the player volume ~ 500 gb which is almost completely full. But I can't access most files, including documents and settings. When I took 'ownership' of the folder, I could open the TI but then it showed everything that was in my documents and settings on the computer file I used to open it, not the documents of the car.

  I can't access the files from an internal hard drive that has been converted to drive external hard after the motherboard is dead. I think that my files are still there, as shown in the volume of the player volume ~ 500 gb which is almost completely full. But I can't access most files, including documents and settings. When I took 'ownership' of the folder, I could open the TI but then it showed everything that was in my documents and settings on the computer file I used to open it, not the documents of the car.

  Uhm... I think the issue here is a misunderstanding of what you watch.

  If you want to access your files from the old hard drive - you need to look in the right place.  If the old system was "Windows 7", "Documents and Settings" is the * wrong * place to look and "Users" would be the place to go.

  You * will * take ownership and change permissions on ALL (you want to propagate to all subfolders/files when do - to save time) in order to get them properly.

  New-->: Windows Vista/7 would have your files located in the directory 'Users' of the root of the drive - and then under your username.

  • \USERS\\Desktop\
  • \USERS\\Downloads\
  • \USERS\\Favorites\
  • \USERS\\Documents\
  • \USERS\\Music\
  • \USERS\\Pictures\
  • \USERS\\Videos\

  ... etc...

  Documents and settings to WIndows Vista/Windows 7 is a symbolic link and would lead to what you see if you tried to use it.

• How can I access my module from a browser or URL vs having to click the icon?

  Hello gentlemen, we built an add-on firefox to do cool things from the browser. do us the same thing in our applications and mozilla ONLY supports our growing corporate customer base (applications do not). the product is ready, but we face a final challenge: a fairly easy way to have users access our product. to do this, they must first install the plug-in. We would like to be able to run/run/access the plugin from a web page, that is, a URL. I can send more specific needs and requirements, but I wanted to open a conversation with you. Thank you very much.

  Hello, I don't understand exactly what you are trying to reach - however since we are a support forum for the users and can not really provide development-oriented advice, your question could be better adapted in the addons forum at https://forums.mozilla.org/index.php or on a site like stackoverflow.com anyway! Thank you for your understanding...

• How can I access the App Store from iTunes on my laptop?  (NOT my phone).

  How can I access the App Store from iTunes on my laptop?  (NOT my phone).

  Hello

  In iTunes, click on the Apps icon on the top left and an "App Store" button will show more to the right.

• Update from Microsoft that I can't access the updated analysis screen.

  Where do you find the page analysis of Microsoft update in the new web page?

  How can I bypass the required internet page explore downloads and automatic updates of mandates be turned on? With this on the first page, that I can't access the analysis coming update screen.
  Thank you
  Gary

  Hi, Gary.

  Disable automatic updates in Windows XP

  http://www.theeldergeek.com/disable_automatic_update.htm

  Windows Update

  http://www.update.Microsoft.com/microsoftupdate/v6/vistadefault.aspx?ln=en-us

• I download the software from amazon, but when I stop and connection then the software has been removed. can anyone help

  I have a samsung laptop with windows vista. and IE 9. I downloaded the software from amazon, but when I stopped and try to connect then I find that my laptop will not start. so I try to get back to samsung and they fix it so that I can connect, but then I find that the software has been deleted and I don't know why. can anyone help

  Hi elsie,

  As you mentioned you did a factory restore using the Samsung recovery disk, it restored the computer to factory settings & finally deleted the application from your computer.

  You can redownload the application & install it.

  Reference: Install a program

  Hope the helps of information.

• I'm trying to upgrade a site from Muse and it keeps telling me that the site has been created with a different version of Muse. I have updated Muse and still can not access the site to make changes.

  I'm trying to upgrade a site from Muse and it keeps telling me that the site has been created with a different version of Muse. I have updated Muse and still can not access the site to make changes.

  Hi rgarden95,

  Can you please confirm the exact version of Muse, you open the file with?

  To check the version of Muse, please click Help-> on Adobe Muse CC.

  Kind regards

  Akshay

• I can't reach the order on Amazon. I get a connection message has been reset

  I can't reach the order on Amazon. Can I not move freely to my account. I tried to sign up with other names and addresses of e-mail, but also without success. I disabled anti virus (Avast) and the Windows Firewall, clean cookies etc. I spent some time with Amazon and my server (PlusNet) tries to solve this problem. It also occurs with Internet Explorer and Safari.

  The problem lies within my own computer, but does not appear to affect any site other than the Amazon. Reset the connection message is common, what is normal or not I don't know, but when retrial normally goes away when you surf elsewhere

  I can access it on Amazon using computers from a neighbor.

  Have you tried to read this article

  https://support.Mozilla.org/en-us/KB/error%20loading%20Web%20sites#Interrupted_or_reset_connection