I can't burn DVD with movie maker window

Similar Questions

• creation of DVD will not burn DVDs for movie maker projects, why?

  I have vista 32 bit. I save movie maker projects, then try to burn them on a disk, but it says only as (0r full 98, 99%) in a single box eventually & (cannot create the dvd, an error occurred while burning the DVDs) in the other box... sometimes it burns, but lately it's not at all... I bought a new drive, I did a restore of full operating system, but nothing works... I need some updates?... what I need to change the format?... BTW, my computer seems to not fit either...

  Hello

  ·        What is the format of the movie maker project file?

  Check if an error code is listed in the event viewer, see the link below: open the event viewer:http://windows.microsoft.com/en-US/windows-vista/Open-Event-Viewer

  You can also check out the link below: the problems with creating a DVD-video using Windows DVD Maker:http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-with-creating-a-DVD-Video-using-Windows-DVD-Maker

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can't burn DVDs with my Satellite U500 (PSU9ME)

  When I try to burn a DVD, I get this message:

  The disc is not burned properly, make sure that you have installed the latest firmware for your CD / DVD and try again

  Hello

  This happens when you use all known DVD formats?
  Have you tried using different brands of DVD?

  What burning software do you use?

• DVD burned with movie maker - green screen

  I burned a dvd with movie maker and when I play the dvd it plays with images all crushed in half top of the screen and the bottom half is green.  How can I burn a dvd and have the image on the entire screen?

  I burned a dvd with movie maker and when I play the dvd it plays with images all crushed in half top of the screen and the bottom half is green.  How can I burn a dvd and have the image on the entire screen?

  =========================================
  No guarantee, but it might be interesting to try to publish your
  project in DV - AVI format to a folder on your hard drive and
  then import the file .avi in DVD Maker to create the DVD...

  Windows Vista-
  Publish a movie in
  Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Movie Maker Vista-
  Quality profiles / editions
  http://www.Papajohn.org/Vista-publishing.html

  And... the info... copied on the net... may be useful:

  =====

  The Green problem bar setting in Windows Movie Maker
  http://www.bernzilla.com/item.php?id=884

  When I tried to follow the directions, I was unable to find XVid on my
  computer.  So I googled XVid and then (I think) the 2nd entrance to
  Download XVid.  After I downloaded it, I could follow the directions
  bernzilla and when I published a video - Voila! no green bar!

  After thick film Green line is published
  http://www.windowsmoviemakers.NET/forums/ShowPost.aspx?PostID=105025

  =====

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• I use Windows Live DVD Maker to create DVD movies to play on regular DVD players. But how can I burn these HD movies created in MS Live Movie Maker on Blu Ray?

  Projects of direct burning on Blu Ray?

  I use Windows Live DVD Maker to create DVD movies to play on regular DVD players.  But how can I burn these HD movies created in MS Live Movie Maker on Blu Ray?

  I think that you need a more powerful software. A Google search for:
  "Blu - Ray Authoring Software" could be a place to start.

• Burn a DVD from Movie Maker with Windows 8.1

  Are there patches of Windows 8 to allow you to burn to a DVD? I used to use this software on Windows 7 and loved all the time! If this is not the case, what is the best tour on how to use it and always burn on a DVD (if any). I don't mind get additional software. If there are several options, what software is the best to use in conjunction with Movie Maker and how to save the file first (including the extension).  I do not have to learn a new program once I have mastered it this one! Thank you in advance for your help!

  Yes, Power 2Go

• Can't read my video I created with movie maker in any VCR?

  running windows xp home and I created a movie with movie maker and now it will not play in any VCR, but he will play in this pc, I want to take the film anywhere and it play?

  HighMAT is obsolete now and there is very little
  DVD players that recognize the format.

  If you want to create a video CD (VCD) or a video
  DVD... you will need DVD Authoring software.

  First step would be to save the Movie Maker project
  in the. Format WMV movie to a folder on your hard drive.
  Then you could play it in Windows Media Player and
  Share it with others.

  XP Windows Movie Maker 2.1...
  To save in a .wmv movie file...
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  ICT... "Best quality for my computer.
  Next /.
  Wait while the movie is saved.
  Finishing...

  If you want to create a video CD (VCD) or DVD video...
  for use in a self-supporting import of DVD player, the movie
  the freeware next to the file in the DVD authoring software...
  maybe worth a try.

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.videohelp.com/tools/DVD_Flick
  (the download is: "dvdflick_setup_1.3.0.7.exe")
  (Download from (direct link) is the fastest).

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in most
  free-standing DVD players... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a CD or DVDs your
  burner.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  (Also... If you want to create a video CD (VCD) go to...
  Project settings / general / target size... and select...
  CD-700 (700 MB).

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  To allow a longer time on the DVD... left click the
  The project settings button / select video / open the target
  Bitrate of drop window. Choose a will more small number
  result in a longer time on the DVD. Press on... Accept.

  The vertical bar to the left of the screen will tell you
  How much compression you need.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  software advanced as Sony, Cyberlink, Nero, Roxio,
  Adobe, Ulead, etc... but at least it is a start.

  Good luck.

• How to import video from a DVD movie maker window... Who was burned from a video camera

  How to import video from a DVD movie maker window

  Hello J Choi,

  1. What is the operating system installed on your computer?

  2. what version of Movie maker are you using?

  I suggest that you copy the video from the CD on the hard drive of the computer and then import it to create DVDs. Browse the CD and locate the video, copy it to your disk (computer) hard, and then try to import.

  You can check the link for more information below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  Thank you
  Irfan H, Engineer Support Microsoft Answers.

• Burn a movie with Movie Maker

  I am trying to burn a movie that I made myself using Windows Movie Maker on a DVD, but whenever he progresses to 80 to 90% at the end I get the message that burns if not possible due to a disk error. I have tried many different disks.
  I use Vista Home Premium and a laptop Toshiba Satellite L300. Would appreciate help.

  It is possible that your project is too big or too complex... and
  also, you might have problems of compatibility with one or more
  of your source files.

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Audio - wav, wma, wmv

  Have you tried the publication (save) project in the. WMV
  film format in a folder on your hard disk and then import
  the saved. Film WMV into DVD Maker to create the DVD?

  Windows Vista-
  Publish a movie in
  Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Movie Maker Vista - Edition
  http://www.Papajohn.org/Vista-publishing.html

  Windows Vista - Windows DVD Maker - burn video disc
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

• I can't open videos or change with Movie Maker. Is it because I have a Sony Handycam? He said that there is a lack of "codec". Where can I install the missing codec from?

  original title: help with Movie Maker...

  I can't open videos or change with Movie Maker.

  Is it because I have a Sony Handycam?

  He said that there is a lack of "codec". Where can I install the missing codec from?

  Very frustrating because I've used it before - maybe because I have SP3? But I don't want to uninstall SP3... :-(

  Help, please!

  Thank you!!

  Thanks for the info.

  MPEG files are problematic in all versions of Movie Maker.
  Best bet would be to convert the files to the. WMV format
  before you import into Movie Maker.

  There are many converters available on the net... some
  free... some detail.

  The following freeware converter is just one example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup280.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the final screens)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup280.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• try to use the webcam on my dell with movie maker and I can't. It is built in.

  My laptop has a webcam.  I need to make a video for my HR class.  Movie Maker can't it?  What should I do?

  Hello
   
  Movie maker cannot capture or record a video, it will edit only video. As long as the video is already saved on your computer, you should be able to open or edit with Movie maker.
   
  Windows Movie Maker no longer supports importing video from a webcam or an analog video source such as a VCR. To use video from your web camera, use the software provided with the camera to record the video to your computer, and then import the video file in Windows Movie Maker.
   
  If you encounter problems with importing files into a movie maker, you can consult the following link for more information:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-importing-files-into-Windows-Movie-Maker
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Conversion of project movie maker Windows DVD player

  Can a project created with windows movie maker (and shown through media player) be converted so that it plays in a normal DVD player? If so, how?

  Can a project created with windows movie maker (and shown through media player) be converted so that it plays in a normal DVD player? If so, how?

  ========================================
  Yes... and since you post in the XP forum... you
  must run XP with Movie Maker 2.1?

  OK, you need to save your project in .avi or .wmv
  film format. Then you need DVD Aurhoring software for
  create a video DVD. The software free DVD Flick can do...
  (How to record in .wmv or .avi... pasted below)

  DVD Flick
  http://sourceforge.NET/projects/dvdflick/

  (the file you need to download and install is:)
  "dvdflick_setup_1.3.0.7.exe")

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Here are some basic instructions:

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.
   
  Finally... Here's how to Save Movie Maker:

  To save in a .wmv movie file...
  Type of... CTRL + P to open the movie recording Wizard.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  ICT... "Best quality for my computer.
  Next /.
  Wait while the movie is saved.
  Finishing...

  To save a .avi movie file...
  (and other options)
  Type of... CTRL + P to open the movie recording Wizard.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  Show more choices.
  Other parameters.
  Open the window of the droplet and choose... DV - AVI.
  Next /.
  Wait while the movie is saved.
  Finishing...

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Does not recognize DVD in Movie maker

  I don't know how I have to save to computer or how to edit a video of 3.5 hours from me painting. I would also like to change it in advance but don't want to mess the place dvd on. I'm new on this and made a few other videos with photos, etc. on movie maker. I need a software or the plug should ins converters or mpeg... out there, any help would be appreciated.

  Will not identify DVD in Movie maker. I recorded paint me a mural using stringing older with Hi 8 tape mini. Then I copied a vhs tape and finished to burn to a dvd + r and now it will play in the drive but I can't open it in movie maker to edit it or reduce it in order to save on computer and then make a short video. Don't know?

  Jazdo

  Actually Yes, there is a video_TS and a video_RM

  =====================================
  Sorry... This will be a long answer...
   
  DVD files you need for editing in Movie Maker
  are the. VOB files. You can find them in the VIDEO_TS
  folder. Copy them to a folder on your hard drive.
  (drag/drop...copy/paste)

  First... just try to rename one of the. VOB files to
  . MPG or. AVI and see if it will matter in Movie Maker.
  If import works... drag the file to the timeline and
  Economy/publication (file / save movie file) in the .wmv
  or to the .avi format. So... re - import new movie .wmv

  Clip for editing purposes.

  (Also... you may be able to play the renowned files

  Windows Media Player... This will give you a chance
  to identify the VOB file that contains the content
  you want to change)
   
  If this does not work... rename the file back to VOB and try
  convert the .wmv file by using one of the following
  free converters:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  #1) format Factory
  http://www.pcfreetime.com/
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First... after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  (#2) SUPER © Simplified
  Universal Player Encoder & Renderer
  http://www.videohelp.com/tools/Super
  (the download mirror site is faster)

  (FWIW... it is always a good practice to create one)
  System restore point before installing new software)

  After installing the program GREAT... open...
  you will see two small circles at the top left
  corner of the screen... check the UPPER circle.

  Now... Drag/Drop your. VOB files in the current field.

  Output container... Choose wmv...

  Video scale size / no change

  Left, click the Encode button.

  Choice: A Simple Profile / OK...

  Wait...

  (FWIW... I have better luck with video if I'm not
  try to multi-task while a file is being converted)

  When the file is converted, you should find it in...
  Program Files / eRightSoft / Super / exit.

  Or... you can type... CTRL + O.. o open the Save
  Window and choose a backup folder.

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Unspecified error when burning DVDs with windows media player DVD is empty when starting get coded, then when control burn error occurs and does not burn the disk. How to fix this?

  I get an error when I burn DVDs with windows media player. He asked correctly when I lad the DVDs that I choose to burn a dvd disc. Then I add my video fles she adds and lists. Then I hit burn and it starts to create the dvd disc. All my files are wmv files. The bar regarding % moves to 100% but captured along with burning the disc, he rejected and I get an unspecified error message. with just a button to hit, which will close the error box. The files don't burn the disk accordingly. The disc remains empty.

  Hi N2tjq,

  Are a. When you facing this problem?

  B. is - what happens with all DVDs?

  C. recent changes made on the computer?

  I firstly you suggests to save the project to your computer, and then try to burn on a DVD at a slower burning speed.

  Choose a speed slower burn to your DVD recorder as follows:

  1 back to adding photos and video to the DVD page and then click on Options.
  2. in the DVD burner speed box, select medium or slow.
   
  Change-Windows-DVD-Maker-DVD-Video-settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-DVD-Maker-DVD-video-settings

  If the problem persists, download the service pack 2 for windows vista on the computer
  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791

  See the link below:

  Error message when you try to publish a movie to a DVD using Windows DVD creation in Windows Vista: "unspecified error".
  http://support.Microsoft.com/kb/949281 
   
  For more information, please see the links below:

  Burn a DVD video disc
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  Troubleshoot-problems-with-creating-a-DVD-Video-using-Windows-DVD-Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  If you use windows media player, see the link below:
  Burn-a-CD-or-DVD-in-Windows-Media-Player
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player
   
  Previous post: the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to create a DVD from Movie Maker?

  I have the Windows live movie maker, which came with my new PC, but I can't find any way to burn a DVD.  How can I download this ability?

  Original title: Movie maker on a DVD.

  Hello

  Please follow the steps in the link below to create a DVD from Movie Maker.

  Burn a DVD-video using Windows DVD Maker disc

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker

  You can also go through the steps mentioned by J to volunteer for more information.

  Windows Live Movie Maker-how burning the project to DVD for playback on TV

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-Live-Movie-Maker-how-to-burn-project-to/dd8d264f-69f7-41A7-B67B-5eeeb9ad41b6

  You can also post your queries to the Windows Live support for more information.

  Movie Maker Portal

  http://windowslivehelp.com/product.aspx?ProductID=5

  Hope this information is useful.