I can't connect to my XP after a Windows Update.

Similar Questions

• Unable to connect via wifi Web after that windows update 8.1

  Laptop HP Pavilion 15 pc 15 n032sa-update to windows 8.1 but now unable to connect to Internet with wifi I have to use the yellow cable.

  Hello

  Please try

  (a) go into Device Manager and uninstall the network card (NIC) wireless.

  (b) restart the machine.

  (c) wait 10 mins.

  Or click on the following link and click Search now

  Kind regards.

• Unable to connect to the internet after installing Windows 8 Pro

  I installed Windows 8 Pro on my laptop, but I can't connect to the Internet. When I diagnose the problem, it can not find the problem. I use a computer dell laptop. The notification on the corner of the Office says I'm connected. I use a wifi that works fine as I can connect my iPad with it. Can anyone help?

  Hello

  Thanks for posting your question in the Microsoft Community.

  I understand that you can not connect to the Internet after the installation of Windows 8 Pro operating systems. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. you receive an error code or message?

  2. what web browser do you use?

  3. don't you try to connect to a wired connection?

  4. What is the Dell laptop model number?

  Please follow the methods and mark the question below:

  Method 1:

   

  Step 1:

   

  Start the computer in safe mode with network and check if the problem persists by following the link below.

  Start settings for Windows (including safe mode):

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode

  If the problem does not persists in Mode safe mode with networking, and then perform a clean boot.

  Step 2:

   

  You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

   

  Method 2:

   

  Follow the steps in the link below.

   

  Wireless and wired network problems:

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

   

  Method 3:

  Follow the steps described in the links below.

   

  Why can't I connect to the Internet? :

  http://Windows.Microsoft.com/en-us/Windows-8/cant-connect-to-Internet

   

  A Wi - Fi & networking:

  http://Windows.Microsoft.com/en-us/Windows-8/connect-Internet#1TC=T1

   

  For reference:

   

  Connect to the Internet:

  http://Windows.Microsoft.com/en-us/Windows-8/connect-to-the-Internet

   

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Qosmio G20-127: after that Windows update I can not see list fax and printer

  Description of the problem
  Model: Toshiba Qosmio G20-127
  Operating Sysytem: Microsoft Windows Media Center Edition

  After the restoration of BONE of restore DVD, I can see list Fax and printer. But after the Windows Update I can not see the list of fax and printer and cannot run the Wizard "add a printer".

  I just installed printers.

  It seems that it s a Microsoft Windows problem and it s not bound Toshiba laptops
  See this Microsoft Knowledge base article:
  http://support.Microsoft.com/kb/823447/

• PhpMyAdmin can not connect to local MySql server on Windows 7

  PhpMyAdmin can not connect to local MySql server on Windows 7

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Can't make a HD video, after that I updated the product? and there is that a message says it can't encode video and will have to change the settings to try again!

  Can't make a HD video, after that I updated the product? and there is that a message says it can't encode video and will have to change the settings to try again!

  jilll

  What version of Premiere Elements you use, what computer operating system?

  What would you update... have you had 12 and 12.1 updated or have you 13 and 13.1 updated? Or did you upgrade may 14 from a previous version?

  Where are you in the settings for your version where you get the message saying you cannot encode the video and you may need to change export settings?

  What is your planned export?

  Please explain, give more details.

  I will review your wire in the morning morning look to follow so that I can help you succeed in your Premiere Elements project.

  RTA

• I don't see the desktop icons after installing Windows updates.

  Original title: connection user init failure

  I m using windows 7 pro. After installing the updates, I have problem with the icon on the desktop .i has no icon on the desktop when you connect. get the message the CONNECTION USER INIT FAILED. After pressing ALT + CTRL + delete > taskmanager > run > Desktop Explorer icons is displayed... .i tried many time to solve this problem of the customer service, but they are unable to solve this problem. Please please help

  It is not possible for me to every time the format of the system

  kindly, please give solution.

  My system is connected to the network with 3 PCs and all are licensed copy.

  Hello

  Welcome to the Forums Community Microsoft and thanks for posting the question.

  According to the description, you get an error message "FAILED CONNECTION USER INIT" after installing Windows updates.

  From my research, this problem occurs if the Userinit key in the Windows registry has been changed. For example, this problem may occur if the Userinit key has a value, but no binary data.

  I suggest you follow the steps mentioned below.

  Method 1:

  Step 1: Start the computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Check the value and binary Userinit registry data

  Important: The following instructions contain the steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information, view the article in the Microsoft Knowledge Base:

  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  a. start Registry Editor. To do this, click Start, type regedit in the search box and press ENTER.

  b. click continue.

  c. Locate and then click the following registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

  d. in the right pane, right-click Userinit, and then click change.

  e. in the value data box, type hard disk:\Windows\System32\userinit.exe, and then click OK.

  Note: The placeholder of the hard drive refers to the drive on which Windows Vista is installed.

  f. close the registry editor.

  g. restart the computer.

  Method 2:

  Restore the system to an earlier point before installing this application.

  
  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore
  System Restore can return your files system to a point in time before you noticed a problem, without affecting documents, photos, or other personal files. If the system restore does not resolve the problem, you can undo the restore operation and choose a different restore point.
  
  More information on:
  
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Hope this information helps. Get back to us if you have more queries about Windows.

• Satellite L25 - after that Windows update is unable to use the Wi - Fi button

  I have a S-1193 Satellite L25, caught a virus, and after a windows update, cannot use wi - fi on the front button.

  What I have to do is disable the adapter, turn it on, then re-boot.
  If I turned off the computer, I di everything again.

  This will make the button work? Or is there a setting that is always on?

  Hello

  > after a windows update, cannot use wi - fi on the front button
  Do you mean the button that launches Internet Explorer?

  According to your message the laptop doesn't connect to the WLan automatically and you will need to connect it manual to get the job of WLan.
  Is this right?

  I put t know how you have connected the laptop to your router, but usually, if you own Windows WLan zero configuration then you should make sure that the parameters to a called + connect when this network is in range. +

  Welcome them

• SBS 2011 Unmountable Boot Volume after a windows update

  Server crash after a windows update.  I don't know what update, it was 8.  Seemed to have completed successfully.  I restarted as requested.  After the restart, he came and said configuration of updates, 100% done and restarted again.  This time, no matter what I do, safemode, networking, last known, all get the blue screen.  I tried to enter in the system recovery options to run a chkdsk /R and partition table repair and run fixboot, but when I get the drivers screen charge, I have all the drivers I can find for my raid controller.  Found 8 of them.  All of them seem to be add the driver, but in the end, the system will not respond.

  The system is a HP Proliant ML150G6 and card Raid is a HP Smart Array b110i.  RAID and discs all show 100% health.  It is a medical office, 5 days old backup, so we're a little desperate.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Network icon is missing from the notification area after the window updated

  I have some problems about the notification for the network and the volume icon!
  They are missing after the window updates!
  I tried to check the "Taskbar and Start Menu Properties' > 'Notification area', Volume and network are grey which I cannot check these boxes. Grateful if you could help me solve this problem!
  Thank you very much!

  Hi VisBo,

  Welcome to the windows vista forums.

  Please follow the steps below to resolve this issue:

  1. right click on the taskbar and click Properties.

  2 tab Area of Notification .

  3 check (on) or disable (off) the options you want or do not want to display on the Taskbar Notification area.

  For the network icon, you can also do with the registry.

  NOTE:

  Please be careful while making changes to the registry, any undesirable changes can affect your operating system.

  1. click on start.

  2. in the start menu search bar type regedit, and then on enter.

  3 Please go to this location in the registry by expanding each location by clicking on the brand more on the left side.

  HKEY_CURRENT_USER\Software\Classes\LocalSettings\Software\
  Microsoft\CurrentVersion\TrayNotify

  4. remove the keys 'IconStreams' & 'PastIconsStream '.

  5. start the Task Manager by pressing ctrl + alt + delete at the same time.

  6. in the Task Manager right click on explorer.exe and kill the process.

  7. click on applications in the task manage, press new task and type explorer.exe, and then press ENTER.

  Explorer will now reboot and your icons should return.

  Alternatively, you can try to uninstall the most recent update that has caused the problem. You can uninstall an update by clicking on the icon of the program features in Control Panel. Select the update that caused the problem, and then uninstall it.

  You can also make a selection of updates to install by setting the windows updates to notify you before installing an update. To open this Panel, and then click windows updates, click settings.

  I hope this information is useful.

  Please let us know if you need assistance.

  Concerning
  Rehman - Microsoft Support

• I have Windows vista Ultimate edition. but he started asking for activation after the windows update while it has already been activated before the update.

  I have Windows vista Ultimate edition. but he started asking for activation after the windows update while it has already been activated before the update.

  Hello, Pichon,

  If Windows Vista application unexpected activation

  On rare occasions, you may be prompted to activate Windows Vista on a computer that did not previously require Windows Vista activation or has already been activated successfully. For example, this may occur on a computer on which Windows Vista was preinstalled by an OEM installation or Volume licensing and are major hardware changes occurred, such as upgrading the hard disk and memory at the same time.

  If you are prompted to reactivate Windows Vista, you can do this by using the Windows Activation Wizard to:

  1. Click Start, and then click computer.
  2. Click System Properties on the toolbar, and then click click here to activate Windows now in the Windows activation area. If you are prompted for an administrator password or a confirmation, type the password, or click continue.
  3. Select the Windows Vista activation method that you want, and then follow the instructions.

  To avoid this problem in the future, obtain the latest service pack for your version of Windows Vista, either through automatic updates or direct download.

  To update to Windows Vista and prevent this activation problem does not happen:

  1. Click Start, click all programs, and then click Windows Update.
  2. Click find updates.
  3. As soon as Windows Vista found the updates, click the install updates button.

  How to activate Windows Vista

  http://support.Microsoft.com/kb/940315

  Activation fails when you try to activate Windows Vista, Windows 7, Windows Server 2008 or Windows Server 2008 R2 on the Internet

  http://support.Microsoft.com/kb/921471

• No sound in browsers after a windows update

  OK, this is the second time that this has happened. While I was asleep Windows Update and now I have no less sound my browsers. I fixed it the first time by running a system restore, but I don't want to have to restore the system whenever windows updates. I am running Vista on a HP Pavilion (DV6 I think) I know that this has nothing to do with browsers, since it happened twice after a windows update.

  In addition, all is well in the mng device. and I can hear in media player.

  Hi ty f.

  ·         Are you referring to Internet browsers?

  ·         What browsers are installed on your computer?

  For Internet Explorer, you can consult the following suggestions.

  Method 1: Check if the sounds are disabled for the browser.

  a. open Internet Explorer. Go to Tools , then Internet Options.

  b. open the Advanced tab.

  c. scroll down to the multimedia section.

  d. make sure the box next to play sounds in web pages . Click on 'ok '. Restart Internet Explorer. A test to see if the sound will now play.

  Method 2: Reset the Internet Explorer settings. See step 2 of the following article.

  Internet Explorer is slow? 5 things to try - help & how-to - Microsoft Windows

• Computer crash - blue screen after installing windows updates

  After you have installed Windows updates waiting on the computer earlier this week, we were not able to get the computer working again.  We were asked to back up and restore the factory settings, which we did.  It instructions update you Windows. When we download the updates it crashes again.  Does anyone know if there is a problem with one of the recent updates that we should avoid so that we our computer working again?

  Hello

  Since you are quite sure this is an update to the source of the problem I want to troubleshoot using this method.

  Control Panel - Windows Updates - upper left settings - set to download but allow you to install them.
  To operate the system and see if there are problems.

  If no problem try to apply updates in small groups or even one at a time, depending on how
  There are many. Beware especially of driver updates that may be older that you have or
  those even incorrect.

  ---------------------------------------------------------------------------------------------------------------

  These can help to solve the problems of update.

  Control Panel - Windows Updates - lower left Installed Updates - uninstall or change

  Or

  Remove an update
  http://windowshelp.Microsoft.com/Windows/en-us/help/182043da-fc3e-4220-AFBC-d9b09f2b2a1a1033.mspx

  Or

  The problems with the removal of updates
  http://windowshelp.Microsoft.com/Windows/en-us/help/5a319824-5cb5-493d-9151-9a97d0f565b61033.mspx
  Or

  How to uninstall updates in Windows Vista
  http://www.vista4beginners.com/how-to-uninstall-Windows-Vista-updates

  Disable or hide optional updates on Windows Vista
  http://www.howtogeek.com/HOWTO/Windows-Vista/disable-or-hide-optional-updates-on-Windows-Vista/

  ============================

  If necessary, you can get free reports of incidents.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Please help! After a windows update last night, I put my laptop on and it won't let me type anything in browsers or anything else.instead a question mark appears when you type!

  need help please, after a windows update last night, I put my laptop this morning and it won't let me type anything to, type all.cant in my browser, research or of anything.when I try to type a? will appear instead and if I press any key again and a new tab opens again and again, if you continue to press any keys.i tried the system restore and it does not work.when I tried troubleshooting my devices on my laptop there is an error code 43. I uninstalled the usb controller option he gave and restarted the computer. I can see is no longer this error.i hope he relocated the itself.anti virus is very good if can anyone help?

  laptop = hp pavillion (BEATS AUDIO)
  OP = WINDOWS 7

  Hi Dan MJ.

  Yes, you can go ahead and try the steps in my previous post and check if this solves the problem.

  If these steps is not enough you can follow these methods and check if it works:

  Method 1: I you recommend to turn off the computer, unplug the power, restart the computer and reconnect the USB device. See if the device is detected.

  Method 2: You can run the hardware and devices Troubleshooter and see if this fits the Bill.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  You can also see the following article for more information about the error Code 43:

  Code 43: Windows has stopped this device because it has reported problems

  http://TechNet.Microsoft.com/en-us/library/cc725873%28WS.10%29.aspx

  Let us know if that helps.

• lost touch pad dell drivers after installing Windows updates.

  Separated from this thread.

  I did the update and lost contact dell drivers pad and now I can't play all the games that I got on the computer. The previous update lost my sound card drivers.

  Hi Craig,.

  Thanks for posting your question in the Microsoft Community forums.

  I'm sorry to know that you are facing problems after installing Windows updates.

  Any Windows specific update which is the origin of the problem or you face the problem after installing updates? This is to check if the updates you receive are associated with hard devices.

  To view your history of update, follow these steps:
  a. open Windows Update by sliding into the right edge of the screen (or, if you are using a mouse, pointing to the corner bottom right of the screen, move the mouse upward), tapping or clicking on settings, tapping or clicking change PC settingsand then by typing or clicking on update and recovery.

  b. press or click view update history.

  I wish that you install the Dell Web site touchpad drivers.

  You can refer to this article for the procedure: http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=1JW07

  In addition, if all of the updates are at the origin of the problems with the hardware on the PC, then I suggest you also update the drivers from the Dell Web site chipset.
  See the article:

  Download and update drivers
  http://Windows.Microsoft.com/en-us/Windows-8/all-drivers

  Let us know if it helps. If you have any other questions, we will be happy to help you.