I can't connect to the German AppStore

I recently moved from America in Germany.I just bought an iPhone SE. I needed to switch to the German App Store and so now that I'm on the German App Store I try to connect and it says that this identifier Apple is no longer valid for the United States App Store purchases, you will proceed to the United States app store. But I want the German App Store and I want to be able to download stuff please help! Note that I am on a family share.

The only way to solve the problem is to make a second new Apple ID, set it to iTunes and App Store in you device setting, open the App Store and to set the region to German

Tags: iPhone

Similar Questions

  • Can not connect to the WiFi on MacMini 2014

    When I try to connect to any WiFi on my MacMini it says ' Unable to join, try to get closer the router. but the router is right next to my Macmini.

    In addition, my wifi connection is correct. It is easily connected to my iPad and iPhone.

    I tried transferring a file using release from my iPad to MacMini. It worked.

    When I tried to connect to the MacMini with ethernet cable, it worked too!

    The only problem is that I can't connect to the router using the wifi on my MacMini.

    What should I do?

    Try to create a new network location:

    Using network locations (Mac OS X 10.6 and later)-Apple Support

    Try to connect as a different user.

    Have you removed the Mini?

    AirDrop uses bluetooth

    http://iPad.about.com/od/iPad_Guide/SS/what-is-AirDrop-how-does-it-work.htm

  • "iPhone is disabled, connect to iTunes" AND "iTunes can not connect to the iPhone because it is locked with a password" error message on the phone and the computer! Help!

    So I recently had my password wrong too many times and my iPhone 4S locked out telling me "iPhone is disabled; Connect to iTunes'. And so I connected to iTunes and decided to restore my phone. I finished the process of restoration of the configuration of my phone, but ultimately, it was not even let me in the phone! Once AGAIN he said "iPhone is disabled; " Connect " to iTunes '. However, this time, this message appeared just when I turned on my phone with a black background. I didn't scan the screen for the error message is displayed (and there was no time to be shown). When I tried to connect to iTunes again as he asked, now it says "iTunes can not connect to the iPhone because it is locked with a password".

    So now, he said "iPhone is disabled; ' Connect to iTunes' on my iPhone 4S and ''iTunes can't connect to the iPhone because it is locked with a password ' on my computer. WHAT should I do?

    As described in step 2 of "Erase your device with iTunes" in this article, you will need to use the Recovery Mode.

    Recovery mode is described in this article as well.  You may try to go into recovery mode more than once to succeed.

    If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

  • Since the update to El capitan OSX 10.11.4 on my Macbook Pro (2012) I can not connect to the app store - ideas?

    Since the update to El capitan OSX 10.11.4 on my Macbook Pro (2012) I can not connect to the app store - ideas? Im not geek so please be gentle!

    Try restarting mode without failure. To restart in safe mode, restart the computer and press on and hold down the SHIFT key until the Apple icon appears. The computer starts more slowly than usual because the disk utility checks the drive. After getting on the desktop launch the App store and try to connect. Successful or not, once you're done, restart normally to exit safe mode.

  • I know my id and changed my password and everything. But I can't connect to the iTunes Store!

    I know my Apple ID and have changed my password. But I can't connect to the ITunes Store. Cannot understand it.

    iTunes - official Apple Support

  • Unable to send emails, SMPT can not connect to the server

    I use the latest version of the EL CAPTAIN 10.11.04, just updated software, and I can not send my emails is to show only SMTP error can not connect to the server.

    I can receive emails, but cannot send emails. I deleted the account and reinstalled it once again changed the SMTP Port 25, 465, 993 trying all of them.

    Please advice, or guide me what I am doing wrong, or what I can do to fix this error.

    Please take each of the following steps that you have already tried, tests after each of them. Back up all data before making any changes.

    Step 1

    In the Mail menu bar, select

    ▹ Connection Doctor window

    In the window that opens, double-click on behalf of SMTP (outgoing mail) problem. it. another window opens, displaying the list of all outgoing mail accounts. Choose the one that you clicked.

    Select the Advanced tab in the settings for the account and check the box marked

    Automatically detect and maintain the account settings

    If it is not already done.

    If there is more than one account of the problem, repeat. Close the window and save the changes.

    Step 2

    Open again the list of SMTP servers. Note the problem server settings, then click the sign button less to delete and confirm. Click on the sign more and recreate the account with the same settings.

    If you use Gmail, remove the account completely in the preferences panel accounts Internet and re-create it. The option "detect and maintain" must be selected in advanced settings for the incoming mail account.

    Messages will be again synchronized with the server automatically. Which can last for hours if the mailboxes are very large.

    Step 3

    Quit Mail runs. Launch the Keychain Access app and enter the name of the server of mail out in the search box. For example, if you use Gmail, enter

    SMTP.gmail.com

    Make a note of the password, and then delete the keychain items. The next time Mail connects to the server, it will prompt for the password. Enter and save the password in the keychain.

    Step 4

    If you use Gmail, sign in to your account on the site, and in the account settings, click the "Sign-in and security." There should be an option somewhere on the page to "allow applications that are less safe." Enable this option and save the change. Note: I don't use Gmail and I have not tested this solution myself. If it does not, either make you on Google user forums for help, stop trying to use Gmail with the e-mail, or just stop using Gmail altogether (strongly recommended).

    The mail server can use a form low, obsolete encryption for secure communications with customers. Recent versions of Mac OS X has changed the behavior of Mail and other applications so that they no longer tolerate low security.

    Log on to the e-mail account on the website and see if there is a security setting, you can change. I can't be more specific. Refer to the documentation of the service provider.

    If there is no adjustment, convince the upgrade of server securityserver administrator. He or she must do it anyway. Low security affects all customers, not only Mac users.

    Otherwise, you have all the right options to continue to use Mail with the service. You can disable SSL in the Advanced account settings, but that is very dangerous and may not work at all.

    You might be able to get a more flexible mail client, such as "Thunderbird", to accept the low security, or perhaps you can access the account via webmail.

    Ideally, you should switch to a provider of postal services better. You would not have this problem with a well-run service. The risk of weak SSL are known for a long time, and to competent server administrators have already taken the simple steps are sufficient to avoid these risks.

  • After update my iPad iOS 9.2.1 to 9.3 live 2 I can't connect to the activation server and does not have the latest version of iTunes to activate

    I downloaded the update to iOS over-the-air 9.3 and installed. Setup cannot connect to the server to activate the ipad2. The message is to try again in a few minutes or connect to iTunes to activate. Yes, I have the most recent and current iTunes version, so this isn't the issue. iTunes recognizes the iPad as my ipad2, but cannot do what he done to be able to use iTunes to activate it. I have 2 iPads. iPad 2 and iPad 4th generation. iPad 4th generation downloaded on-line and updated and active and install without problem. IPad2 updated and not can not connect to the server to activate and I connect to iTunes to activate as the message says, but iTunes cannot activate because it sees my ipad2 and that's all that. Of course, I'll try again once activate WiFi tomorrow but any suggestions would be greatly appreciated.

    Thand you

    same problem with you jerryenea. This seems to happen ipad 2 only? my itunes cannot check my ipad

  • I can't connect to the App Store, any ideas on what to try?

    I can't connect to the App Store, any ideas on what to try?  I tried logging in and out on my iPhone and a desktop computer, but this does not seem to solve the problem.

    Thank you

    Hello

    Did you go to bottom of homepage itunes on your iphone

    Apple ID signal then reconnect.

    Your WiFi connection works well?

    See you soon

    Brian

  • iTunes can't connect to the store purchases.

    I'm getting the following in a pop -: iTunes can't connect to the store purchases.  If you have any firewall software, make sure it has been set to allow communication on port 443. I had not even the firewall on when I got the message. I have

    Hello!

    You should check the many discussions we have already obtained, like this one video playback iTunes 12.3.1.23 does not or presents an error Itunes - iTunes could not connect to the store purchases - if you have any software firewall, make sure that it has been set to t...

  • I have the wireless option, but if I use it not I can't connect to the internet.

    I have the wireless option, but if I use it not I can't connect to the internet.

    original title: difficulty borrowed from internet

    If it's the Acer utility, it is best to visit Acer support:

    http://support.Acer.com/us/en/default.aspx

  • I can't connect to the Internet wirelessly

    I just replaced my wireless device and now I can't connect to the Internet wirelessly

    Hi JimMahoney,

    You have installed the necessary drivers for your new wireless device?

    You receive an error message when you try to connect to the internet using your router?

    What virus protection software is installed on your computer?

    I suggest you try the steps mentioned below.

    Method 1: Run the network troubleshooter utility in Windows 7.

    Please follow the steps below mentioned link to run the network troubleshooter utility

    http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows?T1=Tab03

    Method 2: You can also check the configuration of your new wireless device.

    Contact your Internet Service Provider (ISP) or wireless device manufacturer to check the configuration of your wireless device.

    I hope this helps.

  • I deleted a virus from my computer this morning with Security Essentials, now I can't connect to the internet.

    I deleted a virus from my computer this morning with security essentials, now I can't connect to the internet. The connection icon in the lower right corner of the screen says I am connected and the signal strength is 'very good', but I can't go online. The error message I receive when I right click and 'fix' the connection says: "failed to query TCP/IP connection parameters. Cannot continue. " For assistance, contact the person who manages your network. How can I fix it? The computer is a HP Pavilion dv2000.

    original title: can't get online

    Hello BurnBurn,

    I suggest you to re-installing the driver for your network card. This may involve completely un-installing it and re - install:
  • I can't connect to the internet via my host after uninstalled antivirus software and restart

    I can't connect to the internet via my host after uninstalled antivirus software and restart it.

    I use windows xp on my host computer and all computers in my client. After that I uninstalled the free trial NIS version and restart my host, I lost the internet connection. Tried to restore with the restoration of the system, but when I restarted it, it said the system restore could not be made. I changed it then with my laptop and I can connect to the internet as the host.

    Hello

    This can happen if the uninstall process fails and leaves behind a Symantec registry value. See the following Symantec article.

    Unable to connect to the Internet after uninstalling Norton AntiVirus.

    http://Service1.Symantec.com/support/NAV.nsf/8d071816eedd7cac88256c0e005a96e5/751c3298ab99cf7188256d34006702e2?OpenDocument

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    How to back up and restore the registry in Windows?

    322756 (http://support.microsoft.com/kb/322756/ )

  • WiFi is connected but I can't connect to the net, what to do?

    WiFi is connected but I can't connect to the net, what to do?

    Hi Torrespa,

    1. what happens when you try to connect to the internet?

    2. were you able to use the Wi - Fi connection earlier?

    3. what brand & model of network card?

    You can follow this link & check if the problem persists:

    How to fix wireless network connections in Windows XP Service Pack 2?


    Reference:
    Wired and wireless in Windows network connection problems

     To set up automatic wireless network configuration

    Hope the helps of information.

  • After the removal of a virus, I can't connect to the internet, is looking for an IP address, and the RPC server is unavailable, said

    My netbook has a virus so I did a scan and remove infected files and a program which the virus attached itself to.  Now, I can not connect to the internet.  He is looking for an IP address, and he also says that the RPC server is unavailable.  Any ideas?  Help

    Hello

    Step 1: Start your computer in safe mode, and then try to start the Remote Procedure Call (RPC) services and start the computer in a clean boot
    a. Click Start, type services.msc and press to enter.
    b. in the list of services, double-click Remote Procedure Call services.
    c. change the startup type to automatic, and then click Start.
    d. click ok to apply the changes.

    Reference: http://windows.microsoft.com/en-US/windows7/what-is-safe-mode

Maybe you are looking for

  • iOS 9.3 will not load because you are no longer connected to the internet

    iOS 9.3 will not load because you are no longer connected to the internet on my phone 5

  • Lenovo T450

    Hello I have improved my T450 to 10 windows, but cannot get the bluetooth installed or run. I downloaded the drivers, but it won't yet turn on. Can someone help me with this please? Thank you

  • Money 2004 - cannot access

    I have Money 2004 and now I get this message: Microsoft Money has encountered a problem and needs to close.  I have 2 separate accounts in Money 2004 and may open an account, but not the other.  Any suggestions?

  • disk space used after hot girl here virus

    removed the virus (hot girl here). now my hard drive is showing twice as much to Go to itunes I have. It uses all my hard drive

  • HASH value in a custom report

    Hello I created a custom report for Top SQL on a monitored by Foglight Oracle DB. During the creation, for the input data, I check the HASH value. OK, it shows HASH values, but the format is not identical to the database. In the database, I have for