I can't connect to the xbox live via the xbox or on the internet.
I can't contact xbox live support because it tells me that there is an error whenever I reach the site. When you try to find a connection to xbox live, it tells me to go to
www.Xbox.com/servicealert
Once again, unable to connect. That's what I find when I try to sign in to xbox.com via internet:
In the Application Server error ' / '. Runtime error Description: An application error occurred on the server. The current settings of error customized for this application prevent the details of the error in the application being viewed remotely (for security reasons). It could, however, be read by browsers running on the local server computer.
Details: To enable the details of this error message specific either visible on remote machines, please create a
Notes: The current error page you see may be replaced by a custom error page by modifying the "defaultRedirect" of an application
Hello You can click on the following link to check the status of the XBox Live service. The Xbox LIVE service status: http://support.xbox.com/en-US/xbox-live-status Note: It appears a problem occurred earlier today, but works OK now. Concerning Tags: Windows I have the wireless option, but if I use it not I can't connect to the internet. I have the wireless option, but if I use it not I can't connect to the internet. If it's the Acer utility, it is best to visit Acer support: I can't connect to the Internet wirelessly I just replaced my wireless device and now I can't connect to the Internet wirelessly Hi JimMahoney, You have installed the necessary drivers for your new wireless device? You receive an error message when you try to connect to the internet using your router? What virus protection software is installed on your computer? I suggest you try the steps mentioned below. Method 1: Run the network troubleshooter utility in Windows 7. Please follow the steps below mentioned link to run the network troubleshooter utility http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows?T1=Tab03 Method 2: You can also check the configuration of your new wireless device. Contact your Internet Service Provider (ISP) or wireless device manufacturer to check the configuration of your wireless device. I hope this helps. I deleted a virus from my computer this morning with security essentials, now I can't connect to the internet. The connection icon in the lower right corner of the screen says I am connected and the signal strength is 'very good', but I can't go online. The error message I receive when I right click and 'fix' the connection says: "failed to query TCP/IP connection parameters. Cannot continue. " For assistance, contact the person who manages your network. How can I fix it? The computer is a HP Pavilion dv2000. Hello BurnBurn, I can't connect to the internet via my host after uninstalled antivirus software and restart I can't connect to the internet via my host after uninstalled antivirus software and restart it.
Hello This can happen if the uninstall process fails and leaves behind a Symantec registry value. See the following Symantec article. Unable to connect to the Internet after uninstalling Norton AntiVirus. Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How to back up and restore the registry in Windows? 322756 (http://support.microsoft.com/kb/322756/ ) My netbook has a virus so I did a scan and remove infected files and a program which the virus attached itself to. Now, I can not connect to the internet. He is looking for an IP address, and he also says that the RPC server is unavailable. Any ideas? Help Hello Step 1: Start your computer in safe mode, and then try to start the Remote Procedure Call (RPC) services and start the computer in a clean boot Reference: http://windows.microsoft.com/en-US/windows7/what-is-safe-mode I can't connect to the internet on this laptop wireless Hello. For some reason, I can't connect to the internet on this laptop wireless. I used to access through wireless, but recent I tried several times without success. I even leave do to set still no chance. I am pretty frustrated here, can you help please. Hello I suggest you to follow the steps in this link and check if it helps: http://support.Microsoft.com/kb/870702 It will be useful. My wireless on my laptop will read the files on my desktop but I can't connect to the internet, hard wire my laptop iI unless other computers work fine The following diagnostic information: ipconfig/all > "% userprofile%\Desktop\testdata.txt". ipconfig/all > "% userprofile%\Desktop\testdata.txt". Please note that there are 2 for the second command ipconfig > characters. You can close and remove testdata.txt (which is located on your desktop) and close the command prompt window. I have a WAN Miniport PPPOE problem. Can't connect to the internet. I have a WAN Miniport PPPOE problem. Can't connect to the internet. Hello If you have a Modem and a wireless router or a Modem/Router combination. Read its manual and configure the WAN for PPPOE port. I can't connect to the internet after the elimination of the virus and new restore point. I use IE8. I can only connect to the internet in safe mode with network. What can I do to connect to the internet in the normal windows? Hello When parasites get installed on your computer, they might create hooks in the system computer activities related to the program "Junk" files When you get rid of the 'Junk' hooks could remain in the system, in the absence of target files (they cleaned) problems are created in the network and Internet related activities. If after uninstalling the "Junk", the Internet connection does not work as it should, you will need to restart the operating system parts which get trashed by the process. WinSock and TCP/IP update. Type Cmd in the search text box. Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt. Allow the elevation. Type netsh winsock reset at the command prompt and press the Enter key. The same processes to refresh the TCP/IP replaces the command typed with. netsh int ip reset press enter ipconfig/flushdns, press enter Restart your computer. I recently changed internet service providers and now my Wired desktop can't connect to the internet. I noticed that the connection is showing 'Automatic private address' can I connect all my fine wireless devices. I did extensive troubleshooting with my service provider, but they suggest that my master's degree network adapter must be replaced. I updated the driver, and the device manager says it's working properly. If I connect the same wire for my laptop, it works fine. This is just my office. Any ideas how can I fix? Hello Follow the steps in the KB article below and see if that fixes the problem. How to troubleshoot possible causes of Internet connection problems in Windows XP I can't connect to the Internet via the wireless network. It shows that I have local access only. I can't connect even in SafeMode with network. I have Ping www.microsoft.com and the answer is "ping request could not find host www.microsoft.com. I am connected to the network wireless through my iPad and can connect via my smartphone. This leads me to believe there is only something configured properly on my laptop. Can anyone provide assistance? Hello You can try a system restore... http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions .. .choose time, until this problem (you may tick to show more older restore points). Tricky I can't connect to the internet (without thread or cord) I bought a new hard drive and had to reinstall the operating system. Everything works fine except that I can't connect to the internet. Everything is connected and all. It has worked before. What can I do? Contact your manufacturer for computer/laptop can and ask them how to download the drivers... Cheers. Mick Murphy - Microsoft partner Network connection problem Hi all After cleanind my registry with Wise Registry Cleaner, I can not connect to the internet. Network LAN and wireless do not work. Windows 7 has diagnosed the problem and says the following: There might be a problem with the driver for the wireless network connection card Windows could not automatically bind the pile of IP protocol for the network card. There might be a problem with the driver for the connection to the Local network map Windows could not automatically bind the Protocol IP on the network card stack. Details of detection Diagnostic information (network card) Network card diagnostics information: Network adapter driver to connect to the Local network information: Description... Broadcom NetLink (TM) Gigabit Ethernet Reference the manufacturer... Broadcom Provider of... Broadcom Version... 14.0.1.0 The name of the INF file... C:\Windows\INF\oem5.inf Date of the INF file... 14.05.2010 21:21:56 Name of the section... DEV_KEY2. NTamd64.6.1 Hardware ID... pci\ven_14e4 & dev_1692 Instance status indicators... 0x180200a Status code from device Menager... 0 IfType......................... 6 Physical media type... 14 Similar to Wireless adapt. The problem is probably not the antivirus program, since I have only deinstaled and the problem persists. I've also uninstalled and reinstalled the drivers, but no solution again. I can't do a system restore point before cleaning the registry, because Windows could not find a file that is needed for the restore. I restored again since before saved registry cleaning but no help. Any other ideas please. This really seems teribble :( Thank you Nikola Hello You can try all reset them TCP/IP and WINSOCK by this order from the high command prompt: netsh winsock reset How to run the command prompt as administrator (high) is here: http://Windows.Microsoft.com/en-us/Windows7/command-prompt-frequently-asked-questions part: How to run a command with elevated privileges? LC Can not connect to the internet via my router I recently changed my dsl cable and Internet service provider. Everything worked fine when I had dsl (no problem connecting by router) but now I can only connect to the internet when the cable modem is connected directly to one of my PCs. I tried to reset the router by default and computers can see each other on the lan, but after trying to reconfigure the router with the modem cable connected it does not detect not the new address ip & dns info even if the adapter is configured to receive the ip address and dns automatically (in windows and the settings of the router.) Is there something else in my network installation of Windows 7 that needs to reconfigure? Hi Viking_Dan, It is really difficult to troubleshoot network connections because there are so many factors that might cause a problem. I'll do my best, however. Make sure that you connected the modem cable to the router using the Ethernet port on the router (Wide Area Network) "WAN". Then try to ping the router from an elevated command prompt window. The default IP address is usually something like 192.168.1.1, or similar. Check with your router's configuration. The ping command is: Ping xxx.xxx.xxx.xxx (where the x's represent the IP address) You will receive all 4 packets back with 0% loss. If you do not have, so I'm puzzled. If you receive all 4 packages without losses and still can't connect to the internet, then check if the radio for the router matches the capacity of your PC. Your router may have a frequency of 2.4 GHz only, only 5 GHz, or a mixture. Your PC can support one of those, or both. Check to see if they match. If it still does not work, try to set a static IP address for each of your PCs, with the IP address of the router as the default gateway. For the DNS server, I suggest that you use the DNS from Google free, fast and secure server. The IP address is 8.8.8.8 Let me know what happens Good so I bought a Dell Inspiron of the 620 years for the game and I had to reinstall Windows 7 on a drive I ordered from dell. So I reinstalled Windows 7 and now I have a lot of problems. So first of all it seems very strange, the taskbar is not transparent and all the buttons are very weird. Also, there are no programs in the start menu. Secondly, it is said there is no Internet connection available, but I plugged in everything. I can also connect to the Internet on other PCs as my laptop. Any help is necessary, because I really want to return to the game. :) Hello When you reinstall the operating system, you must obtain the latest drivers for Windows 7 Support of Dell. Go to this link for your model, and then select the operating system > and then select the correct chart, drivers etc. : http://www.Dell.com/support/drivers/us/en/19/product/Inspiron-620s For network adapter drivers, you can use the computer you are about to post here to go to the link above of Dell > download and save the software drivers for the office > transfer using a Flash drive and install it on the problem machine. Then use your game machine to get the rest. And here's how to reinstall using a disc from Dell: "How manually reinstall Windows 7 on a Dell computer. You will need See you soon. I tried to search for reset addon and nothing has changed. It also seems that Firefox change my settings as homepage and the size of the police. I'm not very tech savvy. Mac Mini running Yosemite 10.10.2 Thank you GameCenter does not work on iOS 9.2 Hey community,. Today, I downloaded an application needs (I think) gamecenter to start. (Btw: it's Angry Birds 2) The application has stopped loading to "connecting...". » I checked the app on the home screen: freeze checked the app settings: freeze Issue with MS10-077 and KB2160841 I keep having the same problem with the KB2160841 update - I get the error MS10-077 It keeps prompting me to install an update, but it still gives me an error message. I'm stuck in this loop and can't get out. Your Pro advice is much appreciated. Tha While do research in ie google, yahoo or any other search engine, I find an incalculable amount of old useless information, which are unnecessary, obsolete and completely unnecessary. For example the address lists for stores that no longer exist. is there a place I can see my serial nr when I put my hard drive in another machine? I have a macbook with a logic broke and the photoshop I use wass on it when I bougth it is it possible to get the serial nr of my hard drive, so I can install it once my macbook is fixed?
Similar Questions
a. Click Start, type services.msc and press to enter.
b. in the list of services, double-click Remote Procedure Call services.
c. change the startup type to automatic, and then click Start.
d. click ok to apply the changes.
Notepad '% userprofile%\Desktop\testdata.txt '.
http://support.Microsoft.com/kb/314095
netsh int ip reset log.txtMaybe you are looking for