I can't get any external microphone to work with my windows 7 in my computer HP
I can't get any external microphone to work with windows 7 on my HP computer. I tried a USB and microphones jack 8 mm. what else can I try?
Update your Windows and run this tool:
http://support.Microsoft.com/mats/AudioRecording/
If the problem persists, contact HP support.
Tags: Windows
Similar Questions
-
How can I get my iPhone/iPad to work with Windows 10.
How can I get my phone [/ iPad to work with Windows 10]
Work what?
Have you downloaded the latest version of iTunes on your computer?
What exactly do you expect to achieve?
-
How can I get my scanjet 4400c to work with windows 7
How can I get my scanjet 4400c to work with windows 7?
Site HP says that it is not in the United Kingdom!
Hello
Sorry to say no luck, no more support from HP and Microsoft.
Kind regards.
-
How can I get voice and data to work with the ASA 5505?
Here's the issue I'm having. Can I get a Cisco 7940 to work behind one site to another configured ASA 5505 and I can also get data to work behind it. However, when I try to create a separate Vlan for voice and data, it does not work. Our voice VLANs on our remote sites are 172.30 and data are 172.31, when I put the inside interface with 172.31 data will work and when I on it 172.30 voice will work. I upgraded to a security more license and tried vlan3 created as voice. I have the data to the top and work but I can't get vlan3 to work. Any help would be greatly appreciated. Thank you
Here is my current config:
hostname TESTvpn
activate the password xxxxxpasswd xxxxx
username admin password xxxxx privilege 15
name Corp_LAN 10.0.0.0
name 192.168.64.0 Corp_Voice
name 172.31.155.0 TESTvpnobject-group network SunVoyager
host of the object-Network 64.70.8.160
host of the object-Network 64.70.8.242the Corp_Networks object-group network
network-object Corp_LAN 255.0.0.0
object-network Corp_Voice 255.255.255.0interface vlan2
nameif outside
security-level 0
IP address dhcp setroute
No tapinterface vlan1
nameif inside
security-level 100
IP 172.31.155.1 255.255.255.0
No tapinterface vlan3
nameif Corp_Voice
security-level 100
IP 172.30.155.1 255.255.255.0
No tapoutput
interface Ethernet0/0
switchport access vlan 2
No tapinterface Ethernet0/7
switchport access vlan 3
No tapoutput
dhcpd allow inside
dhcpd address 172.31.155.10 - 172.31.155.30 inside
dhcpd dns 10.10.10.7 10.10.10.44 interface inside
dhcpd sun.ins area inside interface
dhcpd allow insideenable Corp_Voice dhcpd
dhcpd address 172.30.155.10 - 172.30.155.30 Corp_Voice
dhcpd dns 10.10.10.7 10.10.10.44 interface Corp_Voice
dhcpd interface of sun.ins of the Corp_Voice domain
enable Corp_Voice dhcpd
dhcpd option 150 ip 192.168.64.4 192.168.64.3Enable logging
exploitation forest buffer-size 10000
monitor debug logging
logging buffered information
asdm of logging of informationoutside_access_in list extended access allow all unreachable icmp
outside_access_in list extended access permit icmp any any echo response
outside_access_in list extended access permit icmp any one time exceed
access extensive list ip 172.31.155.0 inside_access_in allow 255.255.255.0 any
inside_access_in list extended access allow icmp 172.31.155.0 255.255.255.0 any
Access extensive list ip 172.30.155.0 Corp_Voice_access_in allow 255.255.255.0 any
Corp_Voice_access_in list extended access allow icmp 172.30.155.0 255.255.255.0 anyVPN access list extended deny ip 172.31.155.0 255.255.255.0 object-group SunVoyager
extended VPN ip 172.31.155.0 access list allow 255.255.255.0 anyinside_access_in access to the interface inside group
Access-group outside_access_in in interface outside
Access-group Corp_Voice_access_in in the Corp_Voice interfaceGlobal 1 interface (outside)
NAT (inside) 0-list of access VPN
NAT (inside) 1 172.31.155.0 255.255.255.0Enable http server
http 172.31.155.0 255.255.255.0 inside
http 172.30.155.0 255.255.255.0 Corp_Voice
http 192.168.64.0 255.255.255.0 Corp_Voice
http 10.0.0.0 255.0.0.0 inside
http 65.170.136.64 255.255.255.224 outside
SSH 10.0.0.0 255.0.0.0 inside
SSH 172.31.155.0 255.255.255.0 inside
SSH 65.170.136.64 255.255.255.224 outside
SSH timeout 20management-access inside
dhcpd outside auto_config
Crypto ipsec transform-set esp-3des esp-md5-hmac VPN
crypto map outside_map 1 is the VPN address
peer set card crypto outside_map 1 66.170.136.65
card crypto outside_map 1 the value transform-set VPN
outside_map interface card crypto outside
crypto isakmp identity address
crypto ISAKMP allow outside
crypto ISAKMP policy 1
preshared authentication
3des encryption
md5 hash
Group 2
lifetime 28800tunnel-group 66.170.136.65 type ipsec-l2l
IPSec-attributes tunnel-group 66.170.136.65
pre-shared-key xxxxxoutput
int eth 0/1
close
No tap
int eth 0/2
close
No tap
int eth 0/3
close
No tap
int eth 0/4
close
No tap
int eth 0/5
close
No tap
int eth 0/6
close
No tap
int eth 0/7
close
No tapPeter,
Note that access list names are case-sensitive, so you've actually done something different from what I proposed.
Please do:
no nat (Corp_Voice) 0-list of access vpn
No list of vpn access extended permitted ip TESTvpn 255.255.255.0 everything
IP 172.30.155.0 255.255.255.0 extended vpn access do not allow any list allextended VPN ip 172.30.155.0 access list allow 255.255.255.0 any
NAT (Corp_Voice) 0-list of access VPN
In the case where you did deliberately, for example to separate the 2 acl: note that acl VPN (upper case) is also used in the encryption card, where you cannot add a second LCD.
So if you want to separate you, you will need 3 access lists:
list of access data-vpn ip TESTvpn 255.255.255.0 allow one
voice-vpn ip 172.30.155.0 access list allow 255.255.255.0 any
access-list all - vpn ip TESTvpn 255.255.255.0 allow one
access-list all - vpn ip 172.30.155.0 allow 255.255.255.0 any
NAT (inside) 0-list of access vpn data
NAT (Corp_Voice) - access list 0 voice-vpn
outside_map 1 match address all vpn crypto card
Don't know if this was also clearly to my previous message, I recommend you to replace the "all" (in each of the ACL lines) to something more specific (i.e. a remote network, or group of objects that contain the remote networks).
HTH
Herbert
-
How can I get my voice recognition to work on my windows vista computer?
I tried to set up my recgonition voice for the first time and it worked for a minute, but when I pluged in my helmet a screen come ask me different questions. I thought that I said it's all good but now I can't get my speech recognition to work. Can someone take me through step by step how to make this work? I am disabled and really need speech recognition if possible.
Thank you
Hi llspokes,
1. do you get an error message?
I suggest to try the steps from the link to the following article and check to see if it helps:
Troubleshoot speech recognition
Also, take a look at the link to the following article:
I hope this helps.
-
How can I get a Dell J740 to work with Windows Vista Home Premium?
Someone gave me a Dell J740 printer but it won't work with my Windows Vista. As much reading as I did, I do not believe it is compatible. I wish they would do the printers to work with any laptop, computers. It would be too easy.
You seem to have stumbled in the Windows 7 section of this site instead of the part of Vista. Never mind. The answer is the same, unfortunately.
It doesn't seem to be a Windows driver for this printer for Vista or Windows 7.
Tom
-
I have a Sony DSLR-A300 and I can't get an external flash to work on the shoe mount.
My problem started when I realized that I had a seated old flash Achiever TZ250 around that I used to use on my old film camera Ricoh KR-5 DSLR. Obviously, the mount was different, so I bought a hot shoe adapter, but the flash does not fire. I thought that even if he was still working very well on the old SLR, that he was probably too old an era Flash to work on the new system of claw so I ordered TT520 Speedlite Flash online that I thought would be more consistent on the claw adapter. As soon as it arrived I unpacked and tried, but to my great disappointment I do nothing that can make the fire upwards. It tests fine, but it doesn't fire at all. Is there something I don't? Is it something with this camera I'm missing? Help, please.
Kind regards
Andrew
Amanda, that I had a look that link and not found very relevant because it is not related to my model. I got from a claw of replacement adapter and I still can't get the flash fires. It's as if there is no power going to the Mount of the brand at all. The camera would be defective?
-
I can't get my new scanner to work with Equium A60
I can't get my new scanner (canoscan lide 70) to work with my a60. Is it because the usb ports are all hubs?
Hello
> it because the USB ports are all hubs
Sorry, but this suggestion to me confused.I m also owner of a scanner and it s a simplest thing to connect and install it!
I put t see any problems using the scanner.
All devices should be delivered with the own installation CD and I guess that your scanner also comes with additional supports.
This CD contains the description of the installation and the necessary drivers. -
How can I get my Firefox persona to work with the new version of Firefox?
It worked fine, then my computer automatically updated Firefox and my persona background disappeared. It is listed as active on the backgrounds of modules in the modules Manager. I Foxkeh tail stir. I went and reinstalled but it still does not come. I went to the personas firefox page and tried to install a different character. NONE of them work now. How can I get my background persona back?
Make sure that you are not Firefox running in (permanent) private browsing mode.
- Tools > Options > privacy > Firefox will be: "use the custom settings for history".
- Uncheck the box: [] "always use the navigation mode private.
When you're in private browsing mode then the character is disabled and you get the default theme and a purple icon of PB in the menu button on the side of the right end of the menu bar (bar of tabs on Linux) or Firefox and "(navigation privée)" added to the title bar. "
-
How can I get my sims3 game to work on my windows 7
How can I get my sims 3 to game work on my windows 7
Hi mzprell29,
1. what happens when you start the game? You receive an error message?
2. did you of recent changes on the computer?
Sim3 is compatible with operating systems Windows 7.
Check and make sure that the computer meets the requirement to install the game on Windows 7.
http://support.EA.com/app/answers/detail/A_ID/1339/kW/Sims%203%20system%20requirement
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Hi all
I use Windows 8 (x 64) and recently turned to Outlook as my default email. When I go to find a file to add as an attachment in Outlook, the 'libraries' directory which gets opened is not the same as the normal Windows 7 "libraries" directory. How can I get the sync?
Thank you
Greg
Hi Greg,.
Thank you for choosing Windows 8 and we are happy to help you.
We understand that you can not see the Windows library while attaching a file in Outlook.
Please answer the following questions in order to analyse and better understand the issue.
1. what page you see when you click on attachments in Outlook?
2 have you tried to go to the location of the particular file that you want to send using Outlook?
3. what libraries you see when you open the attachment window?
4 does show data recorded in a particular drive?
5. What are the prospects you related to, windows mail client or outlook.com?
Your answers are important to us. Get back to us with your valuable response.
I suggest you to select all files in the drop down menu of the Windows Explorer window to show all files.
Please describe correctly the question because the question is not clear for us. While it would be better to help you.
I also suggest you the screen shot to save the screenshot of the Outlook attachment window you're referring to the use of Skydrive. Here is the link for your reference.
Use SkyDrive download collected files and after shot/screenshot.
Reference:
The library databases
http://Windows.Microsoft.com/en-in/Windows-8/libraries-Windows-Explorer
How to work with files and folders
http://Windows.Microsoft.com/en-in/Windows-8/files-folders-Windows-Explorer
For other questions related to Windows, you are always welcome in our community. We will be happy to help you.
-
Can any 1 show me how to get all my songs I download go directly to media players of the window... for now, everything I download go to others not in Window Media Player... Thanks for your help...
This isn't my area of expertise, but it's what I do.
I download music from all folders in My Documents. If they do not open upward with WMP if clicked, all you have to do is this.
Right-click on it and open with | Choose the program. Select WMP and then check the box: always use this program to open this type of file. Now, any music downloaded from this file type (MP3, for example), will open with WMP when played.
If you want to save in the WMP library, there is an option in the options of WMP to save in the library, or not. I like to keep them in folders not in WMP and myself, but that's just my preference.
Bruce Hagen ~ MS - MVP [Mail]
-
The microphone works on my other laptop so I know it's good. I entered in the control panel and did all the standard tricks without success. The same microphone works well with Skype on my other HP Pavilion dv5000 XP using the old driver. Maybe I'm missing something?
Hello
· Is the microphone is detected on the computer problem?
Method 1:
You can update the drivers for sound card for the computer manufacturer and check if that helps.
http://welcome.HP.com/country/us/en/support.html
Method 2:
Also run the fix in the below article data and check if this is useful.
http://support.Microsoft.com/GP/NO_SOUND
See also:
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
How can I get the external classes to work in AS3? Sample included.
I'm doing this work, and something basic must be absent. Its straight out of the Adobe Help file example.
CS4, Actionscript 3
Here's what I do:
1 create a .as file and name it "HelloWorldExample.
2 put the script below into it and save it.
3. create a .fla file and save it in the same directory.
4. in the .fla file, put "HelloWorldExample" in the class of Document properties field
5 save and run the film.
I get a white screen. Nothing. I tried a few other examples, but I was not able to get ALL of the external .as files to run. It is the simplest.
Do I need to import them or call them in some way other than step 4?
I missed something?
package
{
flash.text.engine import. *;
import flash.display.Sprite;
SerializableAttribute public class HelloWorldExample extends Sprite
{
public void HelloWorldExample()
{
var str = "Hello World!" This is Flash Text Engine! « ;
var format: ElementFormat = new ElementFormat();
var textElement: TextElement = new TextElement (str, format);
var textBlock:TextBlock = new TextBlock();
textBlock.content = textElement;
var textLine1:TextLine = textBlock.createTextLine (null, 300);
addChild (textLine1);
textLine1.x = 30;
textLine1.y = 30;
}
}
}
As long as you have your class paths set correctly, it is best to have your .as files in an another loc that your. Fla. What happens if you want to use the same class in different .fla? You will copy in each project file? That kind of defeats, the purpose of the use of classes and then, because if you change it you must change it in various places. Not good. No OOD.
So: Edit > Preferences > AS3 settings - add paths to the source path, or a path... something like c:\flashclasses\as3
Inside of your as3 application you assign to your package files. If you use TweenLite need you:
com
greensock
TweenLite classes
or yours:
com
Mydomain
my classes
then you would be important as:
import com.greensock.TweenLite;
import com.myDomain.myClass;
Make sense?
-
HP Deskjet 3000: I can't get my Deckjet 3000 to work with my new 61XL ink cartridge
I always bought HP 61 ink cartridges for my printer HP deskjet 3000 and have never had a problem, I recently bought the XL 61 because cartridge that I was printing a lot of things, but every time I put the new cartridge in I get an error message and I don't understand why.
Hi @Hpierce,
XL cartridges are certainly more profitable and should work. I understand that you see an error message when you try to use the 61XL, I can help you.
It seems to me that the issue could be just this cartridge. Please use the following to fix the problem and let me know the result of your efforts: HP Deskjet 1000 (J110) and the 3000 series printers (J310) - a "ink cartridge problem,'"Incompatible print cartridge", or"Ink cartridge failed"Message appears on the computer."
Please do not forget to keep me abreast of the results, so that I can follow up with you. Thanks, I look forward to hear from you.
Maybe you are looking for
-
Buy an unlocked iPhone factory 5s
I want to buy an iPhone 'unlocked factory' 5 s to use it in other countries (in America). How can I buy it online from the apple.com site? The Amazon sites and eBay sell refurbished who is actually damaged or without work. I bought one and it did not
-
Save the layout of office tailor-made
Whenever I have customize my desktop firefox layout changes by default after a while. So, how can I save my custom layout?
-
I can't access my e-mail Outlook, calendar and contacts, but some features that I enjoyed on my old PC has disappeared when I went to an iMac.
-
Pavillion DM4: BIOS password in HP Pavilion DM4
Hi guys. can someone help me with the code in the bios for this laptop? I installed a new HARD drive and now it asks for a bios password. After 3 failed attempts, I get an error code 50779074. Thank you in advance.
-
Problem of tray Satellite Pro A200 Igfx
When I load Windows Vista 32-bit,Always the Microsoft security blocks igfxtray module one, you have a solution for this? I can accept to run the program after its blocked but next time I start the computer, it is again blocked. Hmm why window decline