I can't get into safe mode

Similar Questions

• Firefox crashes, impossible to create the new profile, reinstall does not work, can't get into safe mode

  Whenever I try to open Firefox, it only open the crash reporter. When I press "Restart Firefox", it just opened another journalist to crash. I use a PC.

  I tried all of the following characteristics, does not:

  1. reboot the computer
  2. system restore
  3. Uninstall and reinstall (done this several times)
  4 remove the Firefox installation folder
  5. try to create a new profile / use the Profile Manager using "C:\Program Files\Mozilla Firefox\firefox.exe" - P, firefox.exe-p and firefox.exe - profilemanager - and all of this was, once again, open the crash reporter
  6 safe mode - literally impossible even to open Firefox so I don't know how I could do that

  I am at a loss. Any help would be greatly appreciated.

  OK, if %AppData% does not lead you in the right place you can also manually navigate to the folder with incident reports (you may need to turn on the display of the first hidden files). It is located in C:\Users\ < your user name > \AppData\Roaming\Mozilla\Firefox\Crash Reports\submitted...

• No signal when start and can't get into safe mode.

  So, I have an E machine with microsoft xp on it. And last night I lost the signal of the monitor. But I just restarted it and she came back. But he started for about every five minutes after re boot. I put it in save mode, and he continued to do so. And then when I started again, there was a "serious error of microsoft" and I sent the error to microsoft, as well as something active desktop. Showing all the reasons of what can happen. My computer is really slow so I decided to just drive with flash reprogramming CD, I put in and restart it and I don't get any signal constantly even now when I reboot... Please help, thanks.

  Hi andreasburlet,

  ·         You see a message on the screen?

  ·         Have you checked for fine connections?

  ·         Do you want to say that you tried to reinstall Windows XP?

  Method 1: Ensure that all connections on the monitor are tight.

  Method 2: Connect and disconnect a RGB cable can help them as well and that could ensure a good signal. Look at the end of the cable to see if you have all the appropriate pins.

  Method 3: You can also try with another monitor, if possible. It could also be your video card. See if it is connected. If you are not comfortable doing so, communicate with a known person.

• Computer laptop blue started upward, can't get into Safe Mode. A way to recover the files?

  Laptop was not load its on the inside before, after a week, I've sorted the problem. but somehwere an along the line of this week, that my windows 7 ultimate decided he wanted me messing around. laptops left on now but does not boot to windows. I tried a system restore, I want to avoid a clean sweep of windows if possible because it is files that I need on my hard drive. Is it possible for me to access my files? If this is not what is the easiest way to sort my laptop?

  Luqman > what is the easiest way to sort my laptop? >>>

  OK, you ready for the big guns now. First of all, turn your machine so that you can read the SNID. Then, pull out your credit card.  Thirdly, connect on http://us-store.acer.com/rcd/ 8 ^)

  Jack E/NJ

• Blue screen of Windows XP, the computer continues to restart, can't get into safe mode, will blue screen with installation as disk, can enter the CMOS?

  Restart Windows xp continues and in the end, the blue screen of death leaves the following error: 0X0000007B (0XF78D2524, 0XC0000034, 0x00000000, 0x00000000) can anyone help?

  If your machine is blue-screening after booting from the XP installation disk, it suggests that your problem is with the hardware rather than auto-run.

  I recommend taking your machine to a local service shop, unless you are confident enough rooting in the bowels of your computer.

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• MacBook Pro opens to the screen and progress bar gray, freezes when the progress bar ends. Have tried several options to get into safe mode and suggested strikes, but can't. Any suggestions?

  MacBook Pro opens to the screen and progress bar gray, freezes when the progress bar ends. Have tried several options to get into safe mode and suggested strikes, but can't. Any suggestions?

  Here are some links from Apple which may help

  How to choose a boot on your Mac - Apple Support drive

  On the screens, you see when you start your Mac - Apple Support

• Bluescreen when trying to get into safe mode - stop 0 x 00000124

  It seems normal to normal mode, but if I tried to go into safe mode, it started to load files and all of a sudden blue screen.
  The code was: stop 0 x 00000124 (0 x 000003, 0x00000000, 0x000000, 0x000000)
  the zeros in the above code may not be correct, but the latest figures are accurate.
  So, what's the problem? How can I fix?

  (ps, my system's thinkpad T400 vista Business edition SP2. Was the reason why I wanted to get into safe mode, my new windows does not work recently.
  I wanted to see if I could do sth in safe mode. Anyway, it is not the problem I want to solve here.)

  Thank you very much.

  0 x 124 is a material error which sometimes causes of software.

  Since you are not able to get in good safe mode, the issue is almost certainly hardware.

  First, recommend set Optimized Defaults in the bios if possible.

  Recommends updating the bios most recent in dos mode if the manufacturer offers this possibility, then clean install Windows after the failure of the drive with Killdisk. You have certainly some problems of severe malware based on this: "my new windows does not work recently.

  Alternatively, you can put the drive into a desktop machine and then copy the last 5 files \Windows\Minidump - be careful of malware here though.

  Download them on Sky Drive public area then paste a link here. We can then in which pilots could play a role in the problem - but as I said - because the problem in safe mode, the issue is something to do with a faulty hardware.

  If you can get these files for us to normal mode by copying them on the desktop before downloading, then more power to you do it elsewhere instead.

  Check that the machine is not having a heat problem.

• I built a new system. Transferred to the hard drive and video card, but everything else is new. Restart Windows as it begins to start. I can get into safe mode and found event id 7026 and event id 7001 in the event viewer.

  As mentioned above, this is a new system, but with a more older IDE hard drive with windows xp pack 2 service (I think). When you first start, it says that windows is not stopped correctly and asks me to choose whether to start it normally or without failure or last known working configuration. When I choose to start windows normally, it will load up to a point. The screen of Windows Xp will come with the slide bar. It will then restart. When I choose to start in safe mode, a bunch of 32 file system scrolls upwards on the screen. I don't remember if it of normal or not. He takes over in SafeMode but. I went to the event viewer and got the following errors.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7026

  Date: 21/01/2011

  Duration: 01:18:54

  User: n/a

  Computer: CLEAR-ZONE of the

  Description:

  The next (s) starting or starting system could not load:

  AFD

  Avgldx86

  AvgMfx86

  Avgtdix

  FIPS

  IPSec

  MRxSmb

  NetBIOS

  NetBT

  Processor

  Rdbss

  Rdbss

  Tcpip

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 21/01/2011

  Duration: 01:18:54

  User: n/a

  Computer: CLEAR-ZONE of the

  Description:

  The IPSEC Services service depends on the IPSEC driver service which failed to start because of the following error:

  A device attached to the system does not work.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 21/01/2011

  Duration: 01:18:54

  User: n/a

  Computer: CLEAR-ZONE of the

  Description:

  The Hello Service service depends on the service protocol driver TCP/IP which could not start due to the following error:

  A device attached to the system does not work.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 21/01/2011

  Duration: 01:18:54

  User: n/a

  Computer: CLEAR-ZONE of the

  Description:

  TCP/IP NetBIOS assistance service depends on the AFD service which failed to start because of the following error:

  A device attached to the system does not work.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 21/01/2011

  Duration: 01:18:54

  User: n/a

  Computer: CLEAR-ZONE of the

  Description:

  The DNS Client service depends on the service protocol driver TCP/IP which could not start due to the following error:

  A device attached to the system does not work.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 21/01/2011

  Duration: 01:18:54

  User: n/a

  Computer: CLEAR-ZONE of the

  Description:

  The DNS Client service depends on the service protocol driver TCP/IP which could not start due to the following error:

  A device attached to the system does not work.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  I did find something online that contains all the system boot or start specific drivers. Windows and harddrive was working in another computer just before he was switched. Let me know if you need other information.

  Thank you.

  First of all you are missing probably a number of device drivers, particularly the network card driver and the driver of the motherboard.  Use your XP disk to perform a repair installation.  This should go a long way toward you're going to get.  If your new box has a driver disc that should help a lot.  You can't port XP perfectly the way you did.   It usually requires a repair installation to fix the hardware abstraction layer. Colin Barnhorst

• Computer will not start. Can't even get into safe mode.

  First title: computer start problems

  When I turn on my computer, a message appears saying soething like 'your computer was turned off not properly' and gives options to start in safe mode, safe mode with networking, safe mode command prompt or start normally, any I selects the screen then just goes black... Help? Any ideas?

  Hi SophieNetherway,
   
  -Remember to make changes to your computer between the calendar when things worked fine and now?
   
  Follow the steps listed in the article given to solve this problem:
  Computer stops responding with a black screen when you start Windows XP

• I can't get Firefox Safe mode.

  Equipped with Windows Vista and latest Firefox. Can't get out of safe mode. I rebooted several times, but still does not work.

  What do you mean with not get out of safe mode?

  You get the start window safe mode with the Reset button?

  If you don't keep changes after a reboot then see:

  • http://KB.mozillazine.org/Preferences_not_saved

• Blue screen stop: error 0 x 00008086 cannot even get into safe mode

  Hello

  I have a huge problem with my laptop. Whenever I have load it I get a blue screen and the "technical information" STOP: 0 x 00008086. I saw answers to this when it is suggested that you go in safe mode and then follow the steps from there, but when I press F8 I get a loud beep and the computer carries its load before coming with the same blue screen.

  I am able to enter the configuration utility (F2) and the Boot Manager (F12), but that's all.

  Help would be massively appreciated

  Thank you

  Hello

  The lower part of this statement for Mary a troubleshooting tool an ERD
  who can help. These must of course be made on another computer with a
  CD burner that can run XP, Vista or Windows 7 as the process uses
  No files from the host computer.

  Here is another method.

  How to create a Vista recovery disk - free
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ===============================

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Foreign crook fooled me and now I can't get out 'safe mode' regardless of attempts to do

  Hello, Monday evening, I googled Facebook Support and found this issue of phone - 1-888-275-2174, which came as a 'techgeeks. I later found out than this fraudulent foreign (probably India) fake f * telephone number simply leads to my nightmare. They stated that they were Technicians of Microsoft, and I asked for verification of this. They said look at the Microsoft Logo at the top of our Logo certifying that we are Technicians from Microsoft, therefore, I allowed them to "interconnection" with me who ultimately turned out to be a mistake. I was calling in reference to a glitch of Facebook and the number that precedes 'i' n appeared a Google search at random. Those genius hackers through my computer to the Nether World, which I had never seen before. They were like "Speedy Gunsallus" and me couldn't keep with these brilliant super Indians of the India. Then they said "your system is fixed", and said goodbye. Well, a few seconds after the attack on my computer from "Left Field", I discovered that my computer was worse; much more serious, as before, I called this misleading number. I restarted immediately and my computer would only allow me to go is Safe Mode. I have very little capability in Mode safe and I need this computer to be fully functional for my business. I googled various solutions possible, all to nothing does not. If anyone in this community has the knowledge to help me in this disaster the mine situation and restore my computer to the normal operating mode. Thank you very much. Phone number here in my office, if necessary, is {deleted}

  If you change any of your bank details and reinstall the OS, you ask for trouble, especially when you use the computer for business.

  Either these so-called "Microsoft" Tech companies want to sell you a worthless software, or remote access to your computer to try to steal your credit card and bank information and also achieve an identity theft on you.

  You gave them remote access and if you do Internet banking, contact your bank, explain, and change passwords.

  If you use your online credit card, cancel and get a new one issued to you.

  And the only way that willl you know that you are free to them is to backup your data and do a clean install of your operating system.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Phone scam information they ring you, or you call the:

  And Microsoft does not contact you unless YOU have made prior arrangements with them to do.

  There is an article in the link I'm you provide at the end of this one

  Read this Information from Microsoft:

  "Avoid scams to phone for tech support.

  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  Don't be fooled of unsolicited calls. Don't provide personal information.

  Here are some of the organizations that cyber criminals claim to come:

  • Helpdesk Windows

  • Windows repair center

  • Microsoft technical support

  • Microsoft technical support

  • Windows Support Group Technical Department

  • Microsoft Research and Development Team (team of Microsoft R & D)

  Report phone scams

  • Help Microsoft to stop cybercriminals in reporting of theinformation about your scam phone.

  • In the United States, use the form of complaint to FTC Assistant.

  • In Canada, the Canadian Centre for fight against fraud can support.

  • In the United Kingdom, you can report the fraud as well as the unsolicited calls.

  See you soon.

• Windows Update turn OFF my pc during the installation of the updates. now, I get into safe mode with network [error number: 0x8007043C]... .this which should I do to fix?

  Running dual core intel 1.83 cpu with 1 GB of memory. tried to update windows and microsoft security essentials.

  in the middle of windows update... firm pc... would not go to the office re-boot (got symbol very small windows sidebar)...

  in Windows Update safe mode would not search for updates, has given > [error number: 0x8007043C]

  What can I do to solve this problem and start successfully for win xp pro sp3?

  Thank you.

  Charlie

  Hello

  I suggest you to follow the steps in this link and check if it helps:
  http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/error-number-0x8007043c-the-website-has/55899f79-0cc2-4A10-b4f8-8de2b5e8de40

  It will be useful.

• How can I get to safe mode.

  I have problems with this computer. I'm not used to windows 8. operating system hard to understand. I signed on, things reappear to me to use. I registered a repair option, and he put me in safe mode

  Hello

  Let the computer start in Mode safe.  Hold down the Windows key and press R.  In the run box, type msconfig and press ENTER.  In the System Configuration window, click the Startup tab and look to see if there is a check mark in the box to start - if there is, click the box to Remove the tick and then click on apply to save the change.  Restart the computer and see if it will boot normally.

  Kind regards

  DP - K

• Can't get into the mode of presentation?

  So I have been an editor of magazine for 3 years now, and the mode of presentation is very precious to me. Never had a problem getting in and out with SHIFT + W. I used a lot.

  I had to reformat my laptop recently and then reinstall my adobe cs4 (from software CD). And now I just can't in presentation mode. When I go to reset keyboard shortcuts, presentation mode is not yet an option?

  Really bumming me out. Can anyone help?

  There was a Patch for CS4/CS5 that introduced the presentation Mode. If you have reformatted the computer and installed from the disc then you will lose many of the patches that came out... Try this link for the old software from Adobe Adobe - InDesign: for Macintosh

  It will be useful.