I can't get my updates. the Windows Installer does not work how to fix it

Similar Questions

• I have a Hp and the micro build does not work how to fix this?

  Can someone help me please? I have a HP T5800 and the micro build does not work how can I solve this problem?

  Hello

  Check with HP, their drivers support and documentation online and ask in the forums about known issues.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ========

  It's probably the pilots who are responsible and who may not really be later or they need to be
  re-installed anyway. The best way is to manually review using the methods below.

  References to Vista also apply to Windows 7.
  
  Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek High
  Audio definition (this is an example and you can have an other name/maker).

  Write the description and the model double click on it - tab drivers - write down
  Version. Now click on update drivers who cannot do anything as MS is far behind certifying
  drivers. Then CLICK RIGHT on it and UNINSTALL - REBOOT - this will rebuild the driver
  stack.

  You can have the default windows or a former certified pilot and it's all or part of the
  issue.

  Now, go to the site of the manufacturer of the system and get the latest Audio/Sound drivers - download - SAVE - go to
  where you put - right-click on Reboot - RUN AS ADMIN-

  Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
  and then install the latest version. Restart and check after each test, not
  rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
  installed shows upward on the tab of the driver.
  
  Go to the site of the manufacturer of the device, and then search for the even more recent drivers and install repeat
  operating mode. Download - SAVE - go to where you put them - click on - RUN AS
  ADMIN - Reboot

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (updated drivers manually using the methods above is)
  to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check see the
  Disconnected devices and show disabled devices - check your micro - highlight
  then on lower right properties. Make sure that the appropriate injector is selected and check
  other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  The volume of the audio recorded by sound recorder in Windows Vista or in Windows 7 is less than
  in Windows XP (or Vista)
  http://support.Microsoft.com/kb/973446

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• iTunes won't uninstall on my XP Professional version 2002. I get an error message that says that the Windows Installer does not work.

  Original title: itunes won't uninstall on my XP Professional version 2002.

  iTunes won't uninstall on my XP Professional version 2002.  I tried to delete all files from apple and it will let me delete the Apple software update.  I get an error MOUSSOKI that says that Windows Setup does not work.  What should I do?

  Hello

  Run the tool fixit in the following article and check:

  Diagnose and solve the program installation and uninstallation problems automatically

• offline activation code how can I get a when the site getactivated does not work?  MSG: failed to process your request. Please try again later.  Help!

  Activation code offline - how to do when the site: getactivated does not work?  MSG: Failed to process your request. Please try again later.    Help!

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME
  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• I installed Vista in a Virtualbox VM and the product key does not work, how to fix this? I use the same product key supplied with the computer originally.

  I bought a Dell Precision T3400 of Dell Financial Services and it came with Vista Business installed.  I installed a new hard drive and installed Vista in a Virtualbox VM by using the recovery disk that came with the computer, and the product key does not work for activation.  I get a message that says I need to activate Windows, but he says that the product key is not valid.  How can I fix it?

  Thank you

  If you have reinstalled the OEM of Vista Business copy on the new hard drive, as Bill says you can't also use it in a virtual machine.

  You can only reuse your OEM of Vista professional copy if it is no longer used on the computer. Do you have what operating system installed on the new hard drive? It was an upgrade copy or complete the license?

  If you used a license to upgrade to another edition of Windows to replace your copy of company then Vista Business license is still in use (for upgrade) and you cannot reuse it in your virtual machine.

  However if you replaced Vista business with a copy of the full license of another edition then you are able to use the OEM copy in a virtual machine, but only on the same computer. You must use the product key from COA to the label on the computer. The product key is put in the copy OEM cannot find the SLIC table on the host motherboard. You must use the phone activation from within the virtual machine. Click on start in Vista Business and typing "slui 4. Do not meet the audio guests until it asks you if you want to speak to an agent. Explain that you have completely replaced the OEM copy with a copy of the full license of the new windows and now want to use the OEM copy in a virtual machine on the same computer. Agent will then give you the activation string. Remember that the virtual machine is not transferable to any other computer.

  This information is offered by Darin Smith (MSFT) and the team of Windows licenses, November 18, 2011.

• Update of Windows XP does not work, how do I stop the Office 07/10 updates?

  For these last months, the web version of Windows Update does not work with XP. When you click on the button for Express or custom installation, the stalls of system looking for updates. So I had to put windows to warn me of updates instead of going on the site, but now it keeps wanting to download me updates for Office 2007 and 2010, but I do not own these products (I use Office 2003).  I could not stop, even when I ticked the box does not warn me of those more. Finally I went to the site and found an option to disable Microsoft Update, which said I could always download the updates to the site, but I can't because he's trying to force me to re - download Microsoft Update.

  What is going on?  I don't like the new Microsoft Update as it keeps nagging me to download updates for the products that I have not yet owned. How can I update Windows XP only?  This is very fustrating.

  For these last months, the web version of Windows Update does not work with XP. When you click on the button for Express or custom installation, the stalls of system looking for updates. So I had to put windows to warn me of updates instead of going on the site, but now it keeps wanting to download me updates for Office 2007 and 2010, but I do not own these products (I use Office 2003).  I could not stop, even when I ticked the box does not warn me of those more. Finally I went to the site and found an option to disable Microsoft Update, which said I could always download the updates to the site, but I can't because he's trying to force me to re - download Microsoft Update.

  What is going on?  I don't like the new Microsoft Update as it keeps nagging me to download updates for the products that I have not yet owned. How can I update Windows XP only?  This is very fustrating.

  Hi Steve,.

  Follow these steps.

  Go to Start | Settings | Control Panel and double click on automatic updates. I'll explain why later.

  Then, tick the option at the bottom to turn off automatic updates, and then click apply/OK.

  Then, go to start, run, copy and paste this command and click OK: services.msc

  In the list of Services, you can see Background Intelligent Transfer Service ?

  Here's a pix what he looks like.

  

  If it is not listed, follow these steps to register the BITS service.

  Open the Windows search tool, copy / paste the following text, and then click Search: qmgr.dll

  Research should show this file in the following locations:

  C:\Windows\System32
  C:\WINDOWS\ServicePackFiles\i386
  C:\WINDOWS\system32\bits

  You might only see qmgr.dll in C:\WINDOWS\system32 depending on your configuration.

  Then, go to start, run and copy/paste: regsvr32 qmgr.dll and click OK

  Do the same with this file: regsvr32 qmgrprxy.dll

  Reboot the system and then copy / paste this command into the field run:
  %windir%\System32\rundll32.exe setupapi, InstallHinfSection DefaultInstall 132 %windir%\inf\qmgr.inf

  If you are prompted to insert the Windows installation CD, ignore this and in the dialog below, replace the path C:\WINDOWS\ServicePackFiles\i386

  If you could only see the file in C:\WINDOWS\system32, change the path to that instead.

  Restart the PC and then go to the Services and you should be able to see BITS in the list.

  Double click on it and then on the general tab, click the Start button to start the service manually. This is just a test to make sure that it works correctly.

  If you get 2 error: cannot find the specified file, click on start, then run again and copy / paste the following command, and then click OK:
  Tracking Add HKLM\SYSTEM\CurrentControlSet\Services\BITS\Parameters /v ServiceDll /t REG_EXPAND_SZ /d %windir%\System32\qmgr.dll

  Reboot again and try once more to start the PIECES. It should work fine now, but in the unlikely case where it fails again, run the following command, and then press ENTER:
  Reg add HKLM\SYSTEM\CurrentControlSet\Control\BackupRestore\FilesNotToBackup

  Reboot once more and then do the following.

  Go to this link and install the IE8 December Update:
  http://www.Microsoft.com/en-GB/download/details.aspx?ID=41404

  If you use IE7, use this link instead:
  http://www.Microsoft.com/en-GB/download/details.aspx?ID=41442

  Finally, go to the Windows Update site and you should be able to download normally.

  If this is the case, re - enable automatic updates in Control Panel.

• Get a message that Windows Installer does not work correctly.

  Original title: Windows Installer problem

  I get a message that my Windows Installer is not workiing correctly.  What should I do?

  Thanks to all who tried to help.  I finally finished on the pone to a tech assistant who could still find a solution.  End of the story: crossed the system recovery and I am now busy do everything to come back as much as I can.  Thanks again for your efforts.

• The Windows Installer does not work. Try to install the drivers for the HP laptop.

  Original title: win installer

  In my victory 8 on Setup window does not work and my laptop is hp 1000-1040 core i 3. and I need all the drivers for my computer hp 1000-1040 core i3 laptop. years me please I wait your answer me...

  If you do not already see this:

  http://WWW8.HP.com/us/en/support-drivers.html and follow the Instructions and download and install all the drivers/software for windows 8. Hope this helps and if you need another post to help and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum

  "When we try to take anything by itself, we find that he hitched to everything else in the universe."  -John Muir

• the Windows Installer does not work correctly

  Hi am using windows 7 ultimate and the problem is when I install adobe reader, he settled not and displays windows install is not installed sucsses entirely which will be I do please someone help me

  Kunal Hey,.

  -What is the exact error that you receive when you install Adobe Reader?

  -Are you having the same problem during the installation of other programs?

  Here are some links you can try if the problem persists with Windows Installer troubleshooting.

  http://support.Microsoft.com/kb/2642495

  http://support.Microsoft.com/kb/2438651

  Note: The steps outlined in the agreement links above with the registry change. Please have a backup of the registry before trying the steps. http://Windows.Microsoft.com/en-in/Windows7/back-up-the-registry

  I hope this helps. If you have any questions, please let us know.

• My Windows Installer does not work. Msg I get: the Windows Installer Service could not be accessed.

  Can't install or uninstall I get this msg.  The Windows Installer Service could not be accessed.  This can occur if Windows Installer is not installed properly. Contact your support team. HELP please.

  Hello Monica and DuaneWolfe,.
   
  
  Thanks for posting in the Microsoft Community. I understand that the Windows Installer does not work on the computer windows vista. I also noticed that there is another thread of yours, with the same question, and the thread was answered by Yaqub K August 30, 2012.
  
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/error-the-Windows-Installer-service-could-not-be/354c393e-CCCA-42AD-9952-4aa70bfdb336
  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information on how to to back up and restore the registry,

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  I suggest you to consult the help article mentioned in this thread and let us know the status of the issue.

  
  Please avoid creating threads in duplicate on the same issue. You can reply to this thread if you need help and I'll be more than happy to help you.

• Update of Windows XP does not work, error 0 x 80245003. Cannot be updated to SP 3, can't update IE 6 to IE 8. How to solve these problems?

  Update of Windows XP does not work. I tried the correction of the error 0 x 80245003 and nothing has changed. Fix, that it won't work because SP 3 is not installed, because of the Windows Update does not. I try to install SP 3 manually, then downloader windows will not install reference SP 2 must be installed. SP 2 is installed. So I tried several ways to solve this problem, and I keep running into roadblocks of Windows. Help, please.

  Hi my NameJoel,

  See the methods mentioned below and check if that helps.
   
  Method 1:
  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Note: A firewall is software or hardware that checks information coming from the Internet or a network. Then the firewalleither blocks information or allows information to pass to your computer. If the information is blocked or throughdepends spent on your firewall settings. A firewall can prevent malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers. Windows XP, Windows XP Service Pack 2 (SP2) and Windows XP Service Pack 3 (SP3) include firewall software.
   
  See also:
  You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or
  http://support.Microsoft.com/kb/943144
   
  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717
  Note: Disable your antivirus software is not usually recommended, some software antivirus prevents certain system changing files. This can cause the Windows XP SP3 installation failure. To make sure that you manage to install Windows XP SP3, temporarily disable your antivirus software, including any third-party antispyware and firewall program. To do this, right-click on the icon for your antivirus program, and then click on disable. The antivirus program icon typically appears in the bottom right corner of the computer screen.
   
  Important: Make sure that you enable the antivirus software after you install Windows XP SP3.
   
  Hope this information helps.

• Impossible to uninstall the windows installer does not properly

  I can't uninstall a program because I get the message Windows Installer does not work correctly... contact support

  Have you tried to install the latest version of Windows Installer?

  Otherwise, try to run the following from start-> Run:
    msiexec /unregserver
  Then,
  msiexec/regserver
  
  
  
  

• My Windows Installer does not work and I want to reinstall Windows. How can I do this?

  original title: Windows install

  My windows installer does not work. How can I reinstall my operating system?

  You will need to change the startup disk in the BIOS for the cd. Then boot from it. If you are installing windows from windows

• How you uninstall photoshop elements 13 when the windows uninstaller does not work?

  How you uninstall photoshop elements 13 when the windows uninstaller does not work?

  Hi James,

  You can follow the article: use the Adobe Creative Cloud cleaning tool to solve installation problems and use Adobe Cleaner tool that helps you to uninstall the application.

  Let us know if it works or not.

  Thank you

  Yann Arora

• I can't install my dreamwever the download link does not work

  I can't install my dreamwever the download link does not work and I need to install, I already pay for it

  Try using another browser.