I can't get the XP computer recognize the Windows 7 network file share more wireless

Similar Questions

• How can I get the windows update? X8024400A error)

  I did a restore after my pro windows xp crashed now can't do windows update! How can I get the windows update? I get an error from the site Web has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. X8024400A error)

  Please help me!

  I could not download my favorite Antivirus unable to get updates.  Only a few site I couldn't even. It seemed to get worse until:

  I fould a place that gave me these instructions:

  1. Reregister the BITS files and Windows Update files. To do this, type the following commands at a command prompt. Press ENTER after you type each command.
     • Regsvr32.exe atl.dll
     • Regsvr32.exe urlmon.dll
     • Regsvr32.exe mshtml.dll
     • Regsvr32.exe shdocvw.dll
     • Regsvr32.exe browseui.dll
     • Regsvr32.exe jscript.dll
     • Regsvr32.exe vbscript.dll
     • Regsvr32.exe scrrun.dll
     • Regsvr32.exe msxml.dll
     • Regsvr32.exe msxml3.dll
     • Regsvr32.exe msxml6.dll
     • Regsvr32.exe actxprxy.dll
     • Regsvr32.exe softpub.dll
     • Regsvr32.exe wintrust.dll
     • Regsvr32.exe dssenh.dll
     • Regsvr32.exe rsaenh.dll
     • Regsvr32.exe gpkcsp.dll
     • Regsvr32.exe sccbase.dll
     • Regsvr32.exe slbcsp.dll
     • Regsvr32.exe cryptdlg.dll
     • Regsvr32.exe oleaut32.dll
     • Regsvr32.exe ole32.dll
     • Regsvr32.exe shell32.dll
     • Regsvr32.exe initpki.dll
     • Regsvr32.exe c:\windows\system32\wuapi.dll
     • Regsvr32.exe c:\windows\system32\wuaueng.dll
     • Regsvr32.exe wuaueng1.dll
     • Regsvr32.exe c:\windows\system32\dllcache\wucltui.dll
     • Regsvr32.exe c:\windows\system32\wups.dll
     • Regsvr32.exe wups2.dll
     • Regsvr32.exe wuweb.dll
     • Regsvr32.exe qmgr.dll
     • Regsvr32.exe qmgrprxy.dll
     • Regsvr32.exe c:\windows\system32\wucltux.dll
     • Regsvr32.exe c:\windows\system32\muweb.dll
     • Regsvr32.exe c:\windows\system32\wuwebv.dll
  2. Reset Winsock. To do this, type the following command at a command prompt and press ENTER:
     netsh winsock reset
  3. If you are running Windows XP or Windows Server 2003, you must set the proxy settings. To do this, type the following command at a command prompt and press ENTER:
     Proxycfg.exe d
  4. Restart the BITS service and the Windows Update service. To do this, type the following commands at a command prompt. Press ENTER after you type each command.
     • net start bits
     • net start wuauserv
  5. If you are running Windows Vista or Windows Server 2008, erase the BITS queue. To do this, type the following command at a command prompt and press ENTER:
     Bitsadmin.exe/Reset /allusers
  6. Install the latest Windows Update Agent. For more information, click on the number below to view the article in the Microsoft Knowledge Base:
     949104 (http://support.microsoft.com/kb/949104/) how to obtain the latest version of the Windows Update Agent to help manage updates on a computer
  7. Restart the computer.

  After doing these, well most of them work. When I clicked on OK, but some are not. All of this worked!   I was able to update.  I was about to throw my computer!

  I don't know the tip you give here would have worked more quickly.  I just couldn't not here. Something was originally internet Exployer of do not leave me here.

  I had to work on him. Now everything seems to work very well. I have sort of my breatgh again and wory that error could haoppen again.

  1 million for your help thanks. It's great to have a place like this with pro like you here.  Much appreciated by a non pro like me.  Great place to learn more about computers.

• How can I get the Windows Fax and Scan program to scan mutiple page to a file rather than to each page into a separate file?

  How can I get the Windows Fax and Scan program to scan mutiple page to a file rather than to each page into a separate file?

  You don't, so use the scanning software provided by your device manufacturer, assuming that you have installed the unknown device with their installation cd or the download direct the full version of this site to the

• Can't get the Time Capsule network to see Airport Extreme?

  I have a network set up through my Time Capsule and I want to express with my Airport Extreme, the problem is that I can't get the network to see Airport Extreme - or rather, we'll see, but when I try to connect to it, it starts to connect, and then I get an unexpected error. I tried to restore both their factory settings and did a restore forced several times to the Airport Extreme, but nothing helped. I made sure to affect my IPv6 link-local only, I've even re-created my network several times (always with the Capsule of time as the main base station, but nothing seems working.

  Any ideas would be very useful.

  The Airport Extreme and time Capsule have been purchased during the last month, and I'm under OS10.11.1

  First of all, try to update your software El Capitan to the current version of operation... 10.11.4... which was supposed to solve some of the bugs that cause the message "unexpected error".

  If still no help, try using an iPhone or an iPad for the configuration.  After the back if you don't know how to proceed.

• Where can I get the missing pieces to my keyboard/mouse wireless laser 7000?

  Original title: 'wireless laser mouse/keyboard 7000.

  They gave me the laser wireless 7000 mouse and keyboard but no manual or instructions. I also think that miss me a 'Flash Player' or 'bluetooth' parts?

  Where can I get the missing pieces
  Advise project managers

  Hi Tbackus,

  You can check with the hardware support to set up the keyboard and mouse:

  Drivers, software and documentation of your product

  Hardware support

  For missing parts, you can contact the Microsoft order desk and check.

  In the United States customers contact the service of orders from Microsoft at the following number:

  (800) 360-7561 Monday to Friday from 05:00 to 19:00 Pacific time.

  Canadian customers can contact the Canadian order desk at the following number:

  (800) 933-4750, from Monday to Friday from 05:00 to 19:00 Pacific time.

• How can I get the Windows 7 Media Center guide to update the channel list.

  I noticed that lists of TV channels in Windows 7 Media Center guide are incomplete.  Not all available channels are appearing.  They disappeared for some time.  I checked the lists online of zapsit and they contain the missing strings.  The program zap2it descriptions are more precise than what appears in the Media Center guide.
  How can I get the added missing channels?
  Keep us on that.
   
  Please also post the questions to
  http://experts.Windows.com/FRMS/windows_entertainment_and_connected_home/f/114.aspx
  and do not forget to mention the Colossus when you post experts.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• How can I get the Organizer to display file names?

  I'm lost and confused in Photoshop 13. How can I get the names of files to display in the menu Organizer? I chose to keep the old version of the display "grid" and miss having the names of all files. I searched the manual online, but can't seem to find what I need!

  Please check options in the menu organizer of the following elements:

  View > Details

  View > Filenames

• Can not get the new laptop to connect to my wireless network but connects to others

  I have just bought a new laptop Dell Inspiron 1545 to Dell.com and have tried to set up the wireless internet for the past hours. The laptop running Windows Vista Home Basic Edition, & my wireless router is an Apple Airport Extreme Base Station (about 4-5 years). Below is a list of problems / advice I've come across so far:

  (1) when trying to connect to a network, my network don't appears in the list of local networks sporadically even if she lost the signal strength of any nearby wireless signal (I must refresh the list to make it appear sometimes)
  (2) when my network is displayed in the list, it is described as a network that is not secure; There are 2 others that come and go in the list that are also not guaranteed, but I was able to connect through one of them.
  (3) when I try to connect via my network it either says unable to connect immediately or poster progress bar, then after a minute or two, says that it cannot connect.
  -to diagnose the problem, I can exclude is not not in the range of my camera as I tried to connect when I'm 2 feet more far
  -It also says view wireless connections again and try again, but this brings me to the same screen
  -L' diagnostics screen mentions that "the network is"hidden"and is either not in range of this computer or wireless settings on this computer do not match the settings of the network." (is there a setting I'm familiar with that?)
  (4) I checked device drivers and all said that they are working correctly
  (5) I can connect to the internet via a direct connection to the router via a cable ethernet not wireless

  In my view, that it is all the information I can provide about this problem. If you need more information, such as the specifications of the system, let me know where to find them and I will re-post. Thanks in advance for any help provided.

  -Jeremy

  Well, it looks like the old router was the problem. You have a new N Wireless for about $80 as suggested and it works like a charm. At took 5 seconds for your laptop to recognize and connect to it and were without problems since then. Thanks again for the help guys... I hope that I won't bother you again =)

  -Jeremy

• How can I get the window 'Remember password' to show for more than 2 seconds?

  Many hotels offer wifi access with a good and an ID that you enter each time that you connect. Firefox easily stores the ID and the password so I don't have to worry about finding the right, but the gate of the hotel displays a pop up right after login. At the same time, Firefox offers to save the password and the popup is the prompt of password remember disappear.
  I can can this setting somewhere or get the prompt back?
  I'm never fast enough to click "remember password".
  Thank you
  Chris

  This happens on all websites, or just this one?

  If there is a key icon located on the left side of your address bar, you can click this option to open the password prompt again.

  If there is no key icon in the address bar, it is most likely because the site is configured to redirect to another page or a domain. Once you are redirected or navigate to another page, the password dialog box will disappear.

  Unfortunately, if this is the case, nothing you can do, as the redirect is probably in the codes of the Web site. The only option would be to try to stop the redirection Web site by clicking on the button stop in the address bar.

  You can also try temporarily turning the accessibility setting that prevents the redirection of Firefox Web sites. This can be changed from the advanced settings in the page options, on the general tab.

  Let us know if it works.

  Note: If you stop the redirection page, you probably to reload the page after you have saved the password, in order to allow the site load the appropriate content. If you turn on the warn me when forwarding setting, you will need to disable this feature, after you save this password, so that the website to function properly.

• How can I get the windows classic color schemes (extra-large) for Server 2003

  Hello

  I have an installation of Windows Server 2003 Ent Terminalserver. Here, I am able to select a colorscheme like classic windows (extra-large).
  On an other W2K3 Terminalserver, I am not able to select. Only normal color schemes are possible.
  How can I get these additional color schemes.

  Thanks for the replies.

  Concerning
  Marc

  Hi Knima,

  Thanks for posting on the Microsoft Community Forums!

  I suggest you to send your request in the TechNet Forums for assistance.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  It will be useful.

  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• I have Windows Vista. I can't get the Windows Defender to remain on I went through all the steps, options & save & tel, but it won't stay lit?

  I have Windows Vista. I can't the Windows Defender to stay lit. I went to tools, options, real-time protection, save & even restarted my computer. Am I missing something? I did it several times even. Then every time I check to see if it is on it says it's off. Help! My computer needs it. Thanking you in advance for your help.

  Hello

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

  "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

  Right click and select Properties , ensure that Startup Type is automatic.

  Once modified, click apply and OK.

  Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

  .

  If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• I can't get the window updates for download the 8007371B error message will not download fixit

  My update does not download automatically and prevents other things on my work pc 8007371b error code I tried all the step to fix it it keeps the fix it low loading also

  Hello

  1. What are the steps you tried?
   
  2. the specific issue with a particular update is?
   
  3. What is the error displayed when correcting, it fails to download?
   
  4. what hardware or software change has been performed on the computer before the question?
   
  Please follow the links below to solve the problem.
   
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/
   
  try to run the Windows Update.
   
  If the update fails while you can,
   
  View the results of the windows journal file.
   
  http://support.Microsoft.com/kb/902093
   
  I hope this helps.

• I can them to run MS Fixez_ the. I use Vista SP 1. I need MS fix, because I'm trying to resolve why I can't get the window updated

  I tried for months get the updates.  I also tried to use MS fix, but it does not either.  Any suggestions?  The error I get is error code 80070002 when you try to update windows.  I followed all of the suggestions to solve the problem without success. So now I try MS Fix and it doesn't is not loading.

  Hello

  Follow these steps and check if they help.

  Step 1:

  I suggest you perform the scan SFC.

  Step 2:

  You can also reset the component of windows update.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry in Windows:

  http://support.Microsoft.com/kb/322756

  If you're still having problems, please check the link below for Microsoft Fixit Center

  http://social.Microsoft.com/forums/is/fixitcenter/threads

• Cannot find the windows version of the MAC version only 11 items.  How can I get the Windows version?

  I bought 11 elements but somehow, I managed to lose the CD for the windows version and now I have a Windows PC.  I don't think that I've ever loaded after that I bought it.  Is it possible to get the downloadable version of windows?

  PES 10, 11, 12, 13, 14 - https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-downloads.html

  PE 10, 11, 12, 13, 14 - https://helpx.adobe.com/premiere-elements/kb/premiere-elements-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Photoshop/Premiere Elements 11: l http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm

• How can I get the windows firewall work

  My wife got a call from someone of 'Windows', she paid and downloaded two programs that did not, the damage has been catastophical, I ended up using my windows disk and reinstalled windows XP, but still a problem, that I could not access the windows firewall, it will not allow downloads, only very slowly. The message says: {WF settings cannot be displayed because the associated Service is not running. You want to start the windows Firewall/internet connection (ICS) Service} or not, if you say yes it says it cannot start

  E-mail address is removed from the privacy *.

  You are the victim of a very common scam. In addition to the money you paid, the prgrams that they installed were probably malware designed to collect and send personal information such as passwords, coordinated banking, credit card, etc. Review all information on your PC as a compromise.

  You should:

  1. tell your bank, etc (as applicable) of the credit card company what happened quickly.

  2. using another PC to your change all passwords quickly.

  3. you were common sense with the need to reinstall Windows because it's the ony way be sure & confident of getting a clean PC. However, make sure that do you a clean reinstall of Windows (involving a format your hard disks) rather than a repair reinstall.

  4. don't forget to consider all the drives (disks internal additional, external hard drives, USB thumb drives, etc.) as potentially infected if they were connected at the time or a moment any since. Unplug them until your PC is up and running with anti-malware real-time protection and a firewall work and then analyze them with a minimum of 2 reputable anti-malware programs (there is a degree of risk of reinfection in that).

  5 consider speaking to the police.

  See also:

  http://www.microsoft.com/en-gb/security/online-privacy/msname.aspx .

  Microsoft are not requested for calls.