I can't install NI Veristand engine RT to LabVIEW RT 2012 2011

Hi all

Since I'm pretty new to this Board, excuse me I'm double questions...

I work with:

System RT: PXI-8135

Software:

LabVIEW 2012

NEITHER Veristand 2011 SP1

NEITHER Teststand 2012

I am currently trying to get my simulation Veristand work correctly. So this means I have to install NOR Veristand Engine to RT target using MAX.

I heard the message (see attachment) when installing.

Question:

Is it possible to install NI Veristand engine 2011 my RT controller that has motor in time real Labview 2012 without downgrading my 2012 LabVIEW for 2011?

Any help would be appreciated...

Thank you

Rajamodol

Hi Rajamodol,

the following document describes the compatibility of facilities of LabVIEW VeriStand:

http://digital.NI.com/public.nsf/allkb/2AE33E926BF2CDF2862579880079D751

VeriStand 2011 SP1 requires a LabVIEW 2011 or 2011 SP1 installation.

Best regards

Peter

Tags: NI Hardware

Similar Questions

  • Install NI Veristand Engine on PXI via error MAX

    I get the error message that I have attached.

    I have avoided this problem by letting someone else install the software on the PXI system for me, but I really need this feature.

    When the error occurs, all the software on the PXI system packages is removed, this occurs for all users.

    I tried this on two different PXI system and the same thing happens.

    Am I missing some package? Or someone has a suggestion?

    Best regards

    Jørgen

    I found a solution that works. Do not know why these files were missing and / or why MAX could not just create them himself.

    I did the following:

    Created a folder + file text for what has been reported missing.

    This resulted in the following structure:

    D:\National Instruments\Shared\Errors\English

    D:\National Instruments\Shared\Errors\French

    D:\National Instruments\Shared\Errors\German

    D:\National Instruments\Shared\Errors\Japanese

    I then added two files for each folder:

    NIVS-modelframework - errors.txt

    NEITHER VeriStand - errors.txt

    And now it seems to work.

  • Safari was hacked, so I can't change my search engine of google, what do I do?

    Safari was hacked, so I can't change my search engine of google, what do I do? Whenever I search, it is said it is set to Google search, but as soon as I press on enter happens with yahoo. It has been hacked.

    Missy1743 wrote:

    Safari was hacked, so I can't change my search engine of google, what do I do? Whenever I search, it is said it is set to Google search, but as soon as I press on enter happens with yahoo. It has been hacked.

    You have not been hacked.  Looks that you have installed the malware or adware programs on your hard drive, and it is at the origin of the result of your search be redirected to Yahoo.  You have two options to remove:

    • Download Malwarebytes' Anti-Malware for Mac.  It was developed by an employee trust and respected here.  It is a simple and non-intrusive program that removes malware known/adware from your hard drive.  That's all that.  It does nothing and is not take anything else.  Unlike the antiviruss protection programs, it does not work in the background of your computer, using the resources and also unlike anti-virus programs (which are not necessary on Macs), it is not actively prevent malware infections or adware.  Its only purpose is to remove them.
    • Restart your computer.  As of April 26, 2016, changes to the support article here-> stop the cAds in Safari - Apple charge El Capitan State removes adware when you connect, but only when connecting.  So, if you do not want to use Malwarebytes, it's another option for you.

    Then go to Safari preferences-> Extensions and remove any that you do not install or you don't need.  Then go to Safari preferences-> search, then reset your preferred Google search engine.  Finally, go to Safari Preferences-> general and make sure that your home page has not been changed and if she, change it back to what it was before.

  • There is no chance to install a standalone engine shared Variable of EVS?

    Hello!

    I wrote a small application that reads the values of a NetworkVariable created on the local computer. The address of this variable is something like \\127.0.0.1\System\test1

    That I can see, I can use this type of variable (I mean System -based) that if I installed an EVS (by Measurement Studio). But to install Measurement Studio, I need too Visual Studio...

    There is a way to work properly with NetworkVariables based on a system without having to install everything as I said before? AES is responsible for the correct operation of NetworkVariables? In this case, is there any chance to install a standalone engine shared Variable of EVS?

    Thank you!

    I found the solution to help NI MeasurementStudio 2008:

    Server deployment

    In this scenario, you must deploy the motor Variable shared to another machine that plays the role of the server. To deploy the shared Variable engine, you must run an installation on the target computer. The required Installer is installed with Measurement Studio for the [InstallDir] \ Redist\NINETVARSERV folder.

    You can view all the command-line options to run the installation program with setup.exe /? . Command line options, you can choose to run the installer in silent mode.

    You can use the Variable Manager to create and configure network on the server variables. The variable Manager is installed by default. To run the Setup program without installing the Variable Manager, run setup.exe /prop VARMANEXCLUDE=1 command. To run the installation program of engine Variable shared in silence and without the Variable Manager, run setup.exe /q /acceptlicenses yes /prop VARMANEXCLUDE=1 command.

  • CAN PXI-8461 with VeriStand using

    I have two cards CAN in my chassis: 8512 and a 8461.  The chassis has the latest NI-CAN driver installed and XI-NET 1.0.0.  I can see/access the 8512 without any problem.  I cannot see/do not know how to configure the 8461 for use with VeriStand.  Under MAX, XI-NET does not list the 8461, but I see it in PXI - 1 chassis system.  It don't will not, however, let me do something with it from there.  Any help is appreciated.

    The 8461 is map of series 2, which cannot be used with the NI-CAN driver (OR-XNET has no effect at this point).

    To begin, start in MAX the NI-CAN by accessing tools configuration tool-> NI - CAN-> RT Hardware Configuration.

    Once you have configured the flow rate in bauds, termination, etc etc etc go to System Explorer (SE), add a CAN Port and specify the baud rate according to the settings you selected in MAX. Then import the incoming and outgoing images and you're good to go...

    Tom

  • 655 HP: I can not install wifi driver hp 655

    Hello everyone.

    I hope someone will help me with this problem

    I have a laptop hp 655, and I can not install its driver wifi...

    I downloaded it (I tried more than drivers), and start the installation, but after only a few seconds this window with installation disappear.

    I don't know what to do... Thank you very much.

    It helps if you have identified the wifi adapter and let us know if the adapter is regarded as being present in the Device Manager.

    You can identify it by a couple of ways.

    One is to use Device Manager, and then view the string PCI\VEN. See the following image.

    Another perhaps simpler method is as follows.  By pressing the power button and immediately press the ESC key to call the start menu.

    Press the F1 key to call the system information window. Locate the FCC ID, WLAN.  Copy and use it in a search engine to find the driver for the installed operating system.

    Don't forget to keep us in the loop.

  • Can I install Windows 7 on P6 2320ed?

    Hello

    I want to downgrade from W8 on my 2320ED P6.

    But my setup of W7 does not seem to recognize the hard disk drivers and is therefore not suitable hard drive to install.

    I tried to use pre-installed INTEL management engine interface (from SWSETUP) drivers but to no avail.

    Anyone?

    Hi Paul,.

    I got it but not working in an elegant way.

    First I had to use the connector, USB 2.0 (backwards) instead of USB 3.0 at the front.

    With the help of USB 3.0 I get the error "unable to find drivers.

    With the help of USB 2.0 installation has been able to see my disk and partitions.

    But when I tried to install W7 on this partition, you guesed already, it says: "Windows cannot use this drive because it is in the GPT format. After some reading I discovered that when you start with device MBR (which of course is my USB key) you can not install Windows to a UEFI/GPT disk.

    So I decided that I should not need UEFI features on this hard drive anyway so I removed by using DISKPART (from SHIFT F10 command prompt in the settings screen). Clean the partition and convert to MBR. Then return to the Setup screen, format and conduct regular W7 installation.

    Phew!

    So now it's on!

    (now having to find drivers W7 USB3.0 controller and some other SM bus controller)

    Anyway thanks a lot for your support.

    See you soon,.

    Jaap

  • Windows Installer stuck on manual, can not install programs

    I can't install programs on my computer. One of the solutions I found was to change Windows Installer from manual to automatic. But when I double click on the installer and click on properties, to change the manual auto box is greyed out and I can't change it. Any suggestions? Thanks for your time!

    Hi April,

    I appreciate the efforts to solve the problem. We would like to know the following information form you for help to come.

    Have you connected to your computer as an administrator user?

    You might face this question when the Windows Installer service is disabled. Make sure that you connect to your computer as a user administrator and then follow them steps below to solve the problem.

    Method 1: Make sure that the Windows Installer service is not set to disabled.

    Follow the steps below.

    (a) press the key Windows key + R to open the rundialog box.

    (b) typeservices. MSC . in the run dialogand then press enter to open Services.

    (c) search theWindows Installer service, and then click Properties.

    (d) right click on the Windows Installer serviceand then click Start. The service should start without errors.

    (e), try to install or to uninstall again.

    Method 2: Reregister the Installer engine.

    Open the to-do bar , and then search for the misexec.exe process is running. If prior to installation, you see this process, it means that there is a process that uses this service. Follow the steps below.

    (a) press theWindows key + X key, select command (Admin) prompt to bring up the elevated command prompt.

    (b) at the command prompt, type the following and press ENTER after each line:

    MSIExec /Unregister

    MSIExec/regserver

    (c) try to install or to uninstall again.

    Start your computer to clean boot and check.

    Perform a clean boot to verify if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts. Follow these steps in the link below to start the computer in a clean boot.

    How to perform a clean boot for a problem in Windows 8, Windows 7, or Windows Vista

    http://support.Microsoft.com/kb/929135

    Warning: Please go to the section: How to reset the computer to start as usual after a clean boot troubleshooting section of Kb to start the computer to a normal startup after you resolve the issue.

    Write to us at the State of the question. We will help you to come.

  • Can ' t install iTunes on a Windows PC running Windows 10 pro 64-bit

    I tried several times to install iTunes without success. I tried uninstalling and reinstalling without success.

    The main error seems to be the 2 error, but I get another error that is great to include the part passing through the installation process. I tried installation in administrator mode, but still none the case.

    Any body can help please?

    Thank you for your help.

    Dave

    Try the steps in this article If you can't install or update iTunes for Windows - Apple Support

  • How can I install iOS 7 more later iOS version 5.1.1

    I want to install iOS 7 on my current iphone 4 iOS 5.1.1 version.

    my free space is 1.1 GB available.

    How can I install? pls help.

    An iPhone 4S can only be updated directly to 9.3.5.

    (145095)

  • Can I install Airdrop on my iMac 2009?

    I am trying to upgrade my OSX 10.5.8 on my iMac9, 1 with Intel Core 2 Duo processor. I have installers for Yosemite and El Captain on my MacBook Pro, but I can't find a way to get them to the older iMac. It's current OSX is not supported by Dropbox, the file is too large for e-mail, even when condensed, and I don't have a CD that is large enough. Airdrop can be installed on my iMac and who would do the trick?

    Thanks for your suggestions.

    Catherine

    Your iMac does support AirDrop.

    To update to OS X, you will need to do it in steps. First of all, on your iMac using Software Update in the  menu. This should take you to OS X 10.6.8 who will install the Mac App Store application. Once this is done, launch and use the screen more compatible fo updates updates.

  • I want to install Adobe CC to my macbook, I thought needed a clean install of El Capitan on a drive in orer to work properly. However, I can not install El Capitan on the app store. My equipment is a beginning 11 Macbook Pro. It would be better?

    Adobe CC is tested on Sierra?

    Sierra will work, but not all the bells and whistles on a 11 first Macbook Pro?

    That of El Capitan can be installed without it is available on the Mac App Store?

    Y at - it a link to a clean, fresh and full installation current of El Capitan available anywhere?

    (Rather than install and perform updates?)

    What is suggested for a 11 first owner Macbook Pro who wants to run Adobe CC on the current material and wants to install a new os before installation of Adobe?

    Y at - it a link to a clean, fresh and full installation current of El Capitan available anywhere?

    (Rather than install and perform updates?)

    If the installation program is still available, it will be to the latest version. No updates (no updates) would be necessary. He would install 10.11.6.

    Look under your "Purchase" tab for the El Capitan software.

    CC Adobe will install on any version of Mac OS X.

  • I can re - install an OSX earlier

    I can re - install an OSX prior i.e. Yosemite 10.10.5, so currently the last OSX (El Capitan)?  The latest version is mess up my audio interface (Symphony 64 Thunderbridge) feature.

    Thank you

    BOE

    If you have a Time Machine backup: OS X El Capitan: revert to a previous version of OS X

    Important: Revenant clears all changes to the files on your Mac since you have installed the new version of Mac OS X. To save the new or revised files, copy them to another disc or save them before following these instructions.

  • can I install maker pro 5 on 10.8.5 file

    can I install maker pro 5 on system 10.8.5 file

    This picture seems to say what version you can run with what MacOS:

    http://help.FileMaker.com/app/answers/detail/A_ID/4701/~/FileMaker-Pro-operating-Syst th-requirements - all versions

    version 5.5.1 COULD operate under 10.8.5, but because they are up to version 15, I expect that they will be useful in implementation if it is not, and will tell you simply upgrade to a more modern version.

  • How can I install mac on PC windows?

    How can I install Mac on Windows PC?
    What is the system requirements to run Mac on a Windows Machine ?

    Thanks DjBaap

    You need a Mac using OS X

Maybe you are looking for

  • How to send large video files from my iPad

    How to send large video files from my iPad

  • Replacement of the frame and hinges - HP Pavilion dm4 laptop

    I have a HP Pavilion dm4 laptop of 2.5 years. The first hinged on both sides broke that makes it harder for the laptop to close properly and now the frame is breaking apart. Is there a way I can get/buy replacements before other parts are screwed up.

  • Re: Failed to create of the media to restore Satellite L500-1XD

    I have a new Toshiba Satellite L500-1XD. I tried to create the support of recovery twice now and both times he failed on the first two discs with the following error; Cannot open the following file.E:\Boot\BCD(Error Code: F1-02013-00000000) I'm using

  • HP envy ultrabook 6-1070el problem with audio and HDD

    Hello I have a problem with my wanting to ultrabook 6-1070el running windows 8; I noticed that when food is attached, and the hard drive is written, speakers make a strange noise when I listen to something. This happens when the power is off, probabl

  • Performance with svchost.exe (Vista)

    I am running Windows Vista with 2 GB of RAM... Whenever I boot, the computer works well for a few moments, but performance falls so seriously... I checked the Task Manager and saw that several processes called svchost.exe... They took good 1.5 GB of