I can't log on to the camera wvc 200 via sololink

Similar Questions

• Hi, I can't download photos from the camera, error 1201, any idea what is - this?

  Hi, I can't download photos from the camera, error 1201, any idea what is - this?

  A common problem on a MAC, less frequent on Windows based on my reading of the reports here in this forum

  You don't have WRITE permission in the folder where Lightroom is trying to copy the photos to (this file is put in the import dialog box in the Destination panel), so change your permissions.

  For future reference, the 201 is not the error code and no use for us here, it's the number of photos that are affected by this error. In the future, just give the complete error message.

• My hard drive was wiped out. How can I log on to the built-in camera?

  OK, so one of my lame friends downloaded something that gave my computer a virus, another lame friend erased the hard drive. All this happened so I was missing, so I don't know exactly what it does, but my computer has no images, music or programs except the stuff to sample it came with. There not all products of Microsoft Word, so that he used, or many other programs.

  This was not too much a problem, because all I really do is go on the internet, but I would use the camera that is embedded in the computer. Do I need to download a program? Looks like there should be a way I can just access, but I can't understand it.
  Thank you!

  Hello

  Troubleshoot camera connection
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problems

  You probably need to recharge the device drivers and camera control software (usually included
  with the drivers and installed at the same time).

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Manually look at the sites of the manufacturer for drivers.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  =====================================================

  Check with the system manufacturer's support, their documentation online and the drivers and ask
  in their forum (if there is one) on the need known problems.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Why can't enable HDR in the camera settings?

  Hello world. I want to activate the HDR to on in the camera, but I could not. I tapped on the HDR to turn it on, but it doesn't. Why?

  I use the manual settings on my camera. The parameters are: Flash off - resolution 15.5MP (16:9) - self-timer off - Smile Shutter off - Focus mode Touch focus - HDR is turned off and won't turn on - Auto ISO Image Stabilizer - Center of count - off - 3 seconds overview

  Launch quick launch one - Geotagging - Touch capture off - Volum use touch Zoom - on - data storage SD - Touch off block. .   Here's my manual settings for the camera. Why can't activate the HDR Mode on IT? Someone has an idea?

  Thank you very much.

  Hi Prodigy1,

  There is a limit of 8 megapixels, because the low light Exmor RS capabilities are optimized around this resolution. So to change the resolution of 8 megapixels or less and this should work.

• How can smartphones blackBerry I unlock the camera?

  Lately, when I pull my BBB of the case of the camera is on the screen. Yesterday, when I tried to use the camera I got a message please close other applications and try again.  As much as I know I have not all applications open.  How can I get the camera to work again? I am a new user and a little unknown as to what he wants me to do.

  With the BlackBerry device powered time, remove battery for a few seconds and then reinsert the battery to restart.

  Now, try the camera again.

  In the future, you must close the applications by using the Menu > close or exit command. Similarly, to see what is open in the background, you can press ALT + ESCAPE (the right button of the trackball) to switch between open applications.

• I can't be diverted to the other web site via Safari or even I tried yahoo, I don't know if there were bugs after updating IOS 9.3 caused this problems?

  I use 6 and just put iPhone update IOS 9.3, but I found that I can not be diverted to the site target via Safari or even in yahoo.

  Please wait until a fix is available at Apple.

  Best.

• can't burn videos from the camera to a dvd with media center

  Windows media player

  I downloaded a movie from my portable video camera (panasonic) and put it in my videos folder. Now when I try to burn it to a dvd on the library he says that he is inconsistent. He returned in the video library, and I can watch it on the computer but the wont let me burn it to a disk.

  Hello

  What operating system is installed on your computer?

  Run the fixit from the link and if it makes a difference:

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems

  Reference: Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  You can also try the steps from the link to fix the problem:

  When you insert a CD or a DVD, Windows Vista may not recognize the disc

  http://support.Microsoft.com/kb/939052

• Problem with Virtual PC: can automatically log on to the comments because the host name is added comments user name after you have entered identifying information.

  When activate the integration in Virtual PC features, then the dialog box "Enter your credentials" appears. After entering the username and password of the system cannot connect because the host name is added in front of the user name that I entered. Example: Guest user name is "Admin". The host name is "XYZ". Vrtual PC try to connect as a user "XYZ/Admin" on the comment system. After getting the error message I can manually correct the user name in the normal windows login screen on the client and open a session. However, no saved credentials, to be asked to log on again whenever I have resize the Virtual PC window. Any ideas how to solve this problem? Thank you!

  Hello

  What is the error message?

  Please try following the steps for the computer to remember the credentials and do not ask the password to open each programs:

  1. when it asks for a password, click Cancel . Without integration feature, you are allowed to log on with an account that do not have a password.
  2. set a password for your current user.
  3. click on Tools , Windows Virtual PC, choose the integration features allow.
  a. type the password, check the box ' remember my references of "and click OK to open a session.»
  b. after joining the domain, logon in XP mode with the local administrator account.

• Panic userspace, can not log in to the system!

  It is the question of the panic of the user space.

  So I can not connect to the system.

  is it still possible to recover my files and data in the SSD?

  Based on the limited information you supplied the answer is 'no '.

• BlackBerry smartphones, I can't log in to the blackberry services

  Hi, since a few days I can not connect to my blackberry internet service. I tried the device and the form of the http://yoigo.blackberry.com/site, but it keep saying my password is incorrect. When I try to retrieve the password I don't receive nor to my device or my e-mail account. What other options do I have?

  Thank you.

  Yoigo is able to help you reset a password.  Call them for the resolution of this situation.

  I hope I've been helpful.

• DROID - I can't log in to the web site

  I bought my Droid with a data plan because I get my schedule referee via the web (do not test before buying).  It is not a https site.  Someone else had this problem?  I plan called the web site and the Motorola tomorrow for help.

  What is the site that you are trying to access too?  It is very possible that you are using a site that is not compatible with mobile browsers.  Well that more and more pages are more accessible, there are still some people who do not have some features on their mobile version.  I found that most of the sites that I use works perfectly well.  I guess that would be a problem of site but if you could post back to the site and we walk through the steps you took and what is happening, I am sure that an answer can be found.

• As of today, why can't log on to the New York Times with Firefox, but can do with Internet Explorer?

  I called the New York Times, and they said that they had several people with the same complaint. I did not have this problem before today. Normally, I recognized when I go on the site and do not have to connect at all. Today, I was not recognized and when I tried to connect, it says that there is an unspecified error and wouldn't let me open a session.

  See also http://blog.mozilla.org/security/2012/11/01/preloading-hsts/

• The right way to face the camera and camera on standby?

  How one brings the camera back to life after the unit returns to standby mode?  What is the right way to manage the device sleep and wake?  Any help is appreciated.

  Hi Sucroid,

  I intend to produce a sample that shows this I hope that during the holiday season.

  Here is some information that can hopefully help you get started...

  When the screen goes to sleep, off camera equipment.  There is nothing you can do about it today, outside of the application one keep awake in your application window. (value SCREEN_PROPERTY_IDLE_MODE SCREEN_IDLE_MODE_KEEP_AWAKE).  Note that this won't save you a user who clicks the power button to force the unit in standby mode.  It will protect you against a situation where your application goes to background or another application requires video resources that are used by the camera.  In these two situations, your application will lose his viewfinder.

  But all is not lost!  There are some events of status, you can listen to that lets you know that the camera stops.  You can listen to these events either with an attached status_callback (applied when starting the viewfinder for example), or by authorizing explicitly state the events using camera_enable_status_event() and waiting for impulses of status.  All these things are detailed in the documentation for the API of photo here: http://developer.blackberry.com/native/reference/bb10/com.qnx.doc.camera.lib_ref/topic/overview.html

  The corresponding lights events are:

  CAMERA_STATUS_RESOURCENOTAVAIL - this event is logged every time that the camera is about to close.  If you have previously called camera_register_resource(), this is the event that listen to you to know that all your camera buffers are about to be démappés - so stop all logic that looks at them and then camera_deregister_resource() camm.  If you do not physically the buffers of viewfinder, then necessarily no need to use this registry/invert mechanism.  It's just there to provide warning and to activate the drivers of the device for you to recognize that it is safe to unamp wait for memory.  Each time the screen goes to sleep, the power button is pressed, or another application has need of resources of the camera, you will get this signal.  If you are curious to know the reason, you can check the 'extra' uint16_t argument in the callback of the situation for one of the camera_powerdownreason_t values.  All video recordings currently active or encodings auto-terminera when this signal is received.

  CAMERA_STATUS_POWERDOWN - event status is reported immediately after the hardware of the device is turned off.  You can't interact more with the camera until this condition is removed.  Note that to capture this event, you will need the user of the status of the event-mode (camera_enable_status_event()) interface, because any reminder of status you can have attached when starting the viewfinder will be cleaned up when the viewfinder stops.

  CAMERA_STATUS_POWERUP - event status is reported immediately after that camera material is fed up after having previously be put off.  Even not not on using status of event-mode interface (camera_enable_status_event()) applies in this case too.

  So, what can you do with this information?

  Well, tuned for CAMERA_STATUS_RESOURCENOTAVAIL will tell you when your viewfinder will close.  At this point, your application must enter a State where he is waiting for an event that will wake it again...

  In most cases, this is the event browser that indicates your application is active or foreground again (NAVIGATOR_WINDOW_ACTIVE or equivalent).

  So when your application is told by browser is it back to the foreground, you can then restart the viewfinder using camera_start_photo_viewfinder() or camera_start_video_viewfinder() according to the requirements of your application.  You will still need to follow the same recipe to start the viewfinder as a cold start your application (for example. Wait for the window of your viewfinder to be filled), but you will not need to reconfigure all the settings.

  OK... which covers 99% of the use cases that you will encounter.  Use case for the 1% remaining, you will need to follow for this CAMERA_STATUS_POWERUP event.  Why?  Well, there is a race condition when things down, in which case if the user wakes up the device while the camera is closing (eg. they struck twice in quick succession, the power button), then the camera will enter its off State, but navigator may actually not report your application it becomes idle.  This is because the infrastructure of power management is waiting actually for the material from the camera to the power off until the system goes to sleep.  If the user wakes up the device upward, then this action is canceled, and the unit enters never actually standby.  In this case of corner, navigator does not say your app to become active, again because he never told your application becomes idle.  So what are you doing?  Well, I have 2 suggestions:

  1. You can follow to CAMERA_STATUS_POWERUP using the event interface mode for the camera equipment.  It's actually the more correct approach and what we are doing internally with the BB10 camera App.
  2. You can use a timer to try to wake up the camera in the case of this corner case occurred.  for example. wait 5 seconds after the signal CAMERA_STATUS_RESOURCENOTAVAIL.  If your application has not been made inactive by browser, then you can try turning it back on the camera.

  I hope this help get you pointed in the right direction and still... I plan on collecting a best-practice appropriate sample that illustrates exactly how to do this when the weather!

  See you soon,.

  Sean

• How can I move photos from my camera to an album?

  I created albums on my iPad. I use the most recent update, 9.2.1. How can I move images from the camera to an album or between albums? And why, when I delete a picture of the camera also remove it from an album?

  Open film

  Select the photos you want to move

  Go to the options at the top of the screen (Upload, Trash, Add To)

  Select Add to

  Screen opens to all photos

  Tap the album where you want to store the peak

  Same procedure if you want to move photos between albums.

  .

  .. When I delete an image from the film she also delete an album?

  Because the film is the master copy.

• Unable to get PC to recognize the camera from Nikon s3300.

  We just bought a Nikon s3300 camera and can not get our PC to recognize it. Whenever we try to install the software, we get an error message telling us that we are missing a file ptpusb.dll and that we should insert the original XP discs. We have not what the computer was XP is already installed. I tried several programs repair/recover for free available, but none worked. Also, I reloaded the last sp3 for XP hoping this would provide that missing the file, but it doesn't work anymore.  Does anyone have any suggestions to solve this problem? I noticed on the internet, that this is not a rare problem with certain digital cameras and XP, but nowhere can I find someone who seems to know the answer!

  original title: lack of ptpusb.dll

  OK here's what I discovered - I discovered a lot of people who have had this same problem when trying to install a relatively new digital camera on XP. I'm not an expert, but the common theme seems to be that one of the 2 dll files are required by the camera to work via the usb connection, and for some reason that I do not understand that they are not easily identifiable or pre-installed when it connects for the first time. The files are ptbusb.dll and/or his sister c:\windows\system32\ptpusd.dll of the file. According to several sites that I contacted, these default files shoud is in at least one of these places - c:\windows\system32 or \system32\dllcache or c:\windows\drivercache\i386. However, ptbusb.dll was not in one of these locations on the version of XP that I was working, even after reloading of the pack SP3 and after looking all hidden files.

  In the end, I went to www.dll-files.com. This was one of the few sites I found that would let me just to download a zip file with the file that I wanted (with file note on how to install and where), without having to sign up for some sort of remedial program that eventually I would have had to pay for.
  I've copied this file to windows\system32 first and does not need to put it anywhere else, because after this, the camera was immediately recognized and the problem disappeared.