I can't play a Webinar because I don't have the right codec?

I can't play a Webinar because I don't have the right codec?

Hello

1 did you change on your computer before this problem?

2. which web browser is running on your computer?

3. what webinar application is installed on your computer?

4. you receive an error message and prompt to install the codecs?

You can read the article and check if it helps.

NOTE: WARNING OF THIRD PARTY SOFTWARE

Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk. :

For more information follow the link below:

Codecs: Frequently asked questions

http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

Response with more information to help you further on this topic

Tags: Windows

Similar Questions

  • Windows 7 says I can't uninstall a program because I don't have the admin rights, but I am the only user

    Windows 7 says that I can't uninstall a program because I don't have the admin rights, but I am the only user on this computer and I am logged on as administrator.

    Please ignore the lectures about how I'm not supposed to use the machine as admin all the time and help me solve the problem. :)

    Hi EnergyIntell,

    -Uninstall on what program are you facing this problem?

    I suggest you to run the fixit and check if it helps.

    Solve problems with programs that cannot be installed or uninstalled

    http://support.Microsoft.com/mats/program_install_and_uninstall/?WA=wsignin1.0

    I suggest you check if you're facing the same question in an administrator account account / new user.

                                    

    Create a new user account-
    http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

    If you are not facing the same problem in a new user account, it is understood that the user account is damaged. You can check the link below and use the steps provided in difficulty a user account is damaged.
    http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  • Please help for the love of God-windows photo viewer can't open this photo because you don't have the appropriate permissions to access the location of the file

    Hello

    I had some files in my recent windows 7 the name of the color of my files and folders become green but I didn't know what happens later.
    After awhile, I changed my windows and I install the same windows 7 86 x just like before.
    I can't open these files that retain the names of Greens.
    These files are almost JPEG and PSD(Photo shop).
    I can't copy, cut. name change. delete, then open them with any computer, such as windows photo viewer software, photo shop, see ACD and other software.
    I surfed on the Internet and someone said that there is a software which is $ 26 but there is no guarantee that it works and files could not be opened.
    someone said your question to help Microsoft because they are the only one who have the codec for this file.
    Perhaps because the user or changed windows shows this error code.
    If anyone can help, please solution.
    Thank you very much.
    E-mail address is removed from the privacy *.

    Install this...

    http://www.howtogeek.com/HOWTO/Windows-Vista/add-take-ownership-to-Explorer-right-click-menu-in-Vista/

    It will help to get ownership of the files and is useful when you are trying to access an old user account...

  • Windows Movie Maker is not let me download Flip images because I don't have the correct codec?

    I have a Flip video Ultra, model U112OB, and I am trying to download his images on my PC so I can modify it with Windows Movie Maker.  But whenever I try to bring it on movie maker it says: the F:\DCIM\100VIDEO\***+ file. MP4 cannot be imported because the codec required to play the file is not installed on your computer. If you have already tried to download and install the codec, close and restart Windows Movie Maker, and then try to re-import the file.

    I visited a websight to support customer flip and ordered to download online with windows, but I was not able to find what I'm looking for.

    Any Suggestions?

    First... Download the video in a folder on your hard drive.

    There is some info on the following link:

    Movie Maker and Flip digital camcorders
    http://www.Papajohn.org/mm2-CamcordersFlip.html

    (FWIW in Windows Live Movie Maker 7...) MP4 files
    should be compatible)

    Then, convert the video to the. WMV format.

    There are many programs that can do conversions...
    The following freeware is an example...:

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    Format Factory
    http://www.videohelp.com/tools/Format_Factory
    (the 'direct link' is faster)
    (the file you want to download is: > FFSetup260.zip<>
    (FWIW... installation..., you can uncheck
    ('all' boxes on the last screen)

    First, you will need to decompress the file or just open the
    Drag FFSetup260.exe out of the folder
    and drop it on your desktop. To install left click.

    Next, after the download and installation of Format
    Factory... you can open the program and
    left click on the toolbar, the "Option" button and
    "Select an output folder to" / apply / OK.
    (this is where you find your files after they)
    are converted)

    Drag and drop your video clips on the main screen...

    Select "all to WMV" / OK...

    Click on... Beginning... in the toolbar...

    That should do it...

    Now, the clamps must be compatible with Movie Maker.

    Good luck.

  • I can not actitvate windows because I don't have the product key I bought a used pc

    I bought a used computer and now I can not actitvate windows because I don't have the product key

    http://social.answers.Microsoft.com/forums/en-us/XPInstall/thread/bc4d12bb-d592-4325-80aa-3b26759ad989

    Responded to your other Thread; link above.

    See you soon. Mick Murphy - Microsoft partner

  • Windows Photo Viewer cannot open this picture because you don't have the appropriate permissions to access the location of the file. »

    Separated from this thread.

    I have the same problem when I try to access some of my photos through any method (File Explorer, IE, Windows Photo Viewer, etc.).  When I try to display the image, I get an error message that says "Windows Photo Viewer cannot open this picture because you don't have the appropriate permissions to access the location of the file."  A few photos in the folder open very well.

    The photos are stored on the hard drive of PC in the pictures folder.  Not all pictures are affected - some I can always access.  I tried to run your AutoCorrect tool - it has not fixed the problem.  I tried to add "everyone" by your above statement and he could not solve the problem.  While it was updating the permissions for everyone, it displays the following error message: "unable to enumerate the objects in the container.  Access is denied. »

    Hi Bruce,.

    You might face this problem when you have not signed up your computer as an administrator user. Please write us with the following details.

    You did changes to photo viewer settings prior to this problem?

    I suggest that you follow the steps in the link below by Babu V dated August 21, 2013 and check if this may help you.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-files/window-Photo-Viewer-cant-open-this-picture-because/05e31f84-75ab-4772-84a5-5ce0e6e71f61

    Let us know the status of the issue.

  • How can I reinstall windows vista when I don't have the CD?

    I have a problem with my windows vista and I need a new facility, the problem is that I don't have the CD because it was installed when I bought the laptop.
    My windows is Vista Business, SP2, 32-bit, 2007!

    Thank you!

    How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

    There is no Vista free download legal available.

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

    See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

    Normally, you have to press F10 or F11 at startup to start the recovery process...

    Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

    You can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

    They will tell you how to do this.

    Every computer manufacturer has their way of doing recovery disk/s.

    Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

    Save all data, because it will be lost during a clean installation.

    See you soon.

    Mick Murphy - Microsoft partner

  • I have windows xp pro, how can I restart my computer if I don't have the disc and the key

    I would like to know how to reboot my computer and erase everything when I don't have the disc and the key

    You will need to get both if you want to reinstall Windows on your computer.  The key is in your Windows system, if it can be started and run, by using a utility such as Magical Jelly Bean Keyfinder.  With respect to the disk, your computer manufacturer may be able to provide one for you.

  • I can't delete a folder because I do not have the permission, but I am the administrator. It doesn't let me change the permissions. Help?

    First of all, sorry if this is in the wrong place. I had no idea what section to post this in.
    Today, I was using a program for the 'Minecraft' game called MultiMC and removing files that it created I don't have anymore, I came across a folder, I could not open, delete, or do something with. When I try to open it it says ' (place) is not accessible. Access is denied. " When I try to remove it, he said ' you must be authorized to perform this action. You need computer administrator permissions to change this folder ' (though, I'm the administrator - only account on the computer). It also gives me 'Retry' and the options to cancel, nor necessary. On properties it says "Unable to display current owner" and won't let me change the owner, even to the administrator. The file is 0 bytes in size, but I want to get rid of because I might want to remove the folder that it is in the future, besides I don't know if it's a virus or whatever it is. Please can someone help.

    Try this:
     
    How to take possession of an item in Vista. Works also under Windows 7
    http://www.howtogeek.com/HOWTO/Windows-Vista/add-take-ownership-to-Explorer-right-click-menu-in-Vista/ 
    And it is necessary:
     
    Unlocker File Remover
    http://www.emptyloop.com/Unlocker/
     
    Alternative download sites.
     
    Download it from FileHippo
    http://filehippo.com/download_unlocker/
     
  • I need to re - install and reactivate my Office CS6.  I can't because I don't have the key code for the previous version of CS4.

    Had a boot disk failure.  New hard drive.  Re-install programs.  Reinstalled CS6, but cannot activate because I do not have a code for the previous version.  I have the key code for CS6.  It is listed in my Adobe account.  How can I turn it back on this program?

    Find the serial number of your Adobe product quickly

  • Where can I download win xp free missing files because I don't have the cd of win xp?

    I don't have my cd of win xp & Miss files and icons such as my volume control icon. Where can I download these free missing files? Windows does not start upward on its own to reboot, I have to press F1 to WIN to continue to start.

    Thank you

    Sher ~.

    There is noplace for download free Windows or media files.  You will need to beg or borrow a Windows disk, or if Windows was preinstalled on your computer your computer manufacturer may be able to help.

  • I can't change a PNG of a watermark file, because I don't have the little wand on my tools screen to select the white background to delete?

    If someone has had the problem of trying to convert a PNG image to a watermark and when I do the tutorial on youtube I don't even have the little wand they say select you on the left side of your screen so that you can remove the white background. I'm stuck.

    This is probably due to the icon tools being hidden by default. Both the wand and the quick selection tool share the same space. Place your cursor on the icon of the tool Quick Selection press the button of the mouse and hold the button for about 2 seconds and a passage outwards menu will appear. (this can be done with any tools that have a small triangle in the lower right corner)

  • Where can I find my favorites? I don't have the button next to the "home" button Is there anyway to add it?

    Where can I find my favorites? There is no button next to the "home" button I like to look through a list of favorites to see what sites I visit occasionally and sites I visit often.

    Hi dianag,.

    If you have the Firefox button, you can access your favorites by pressing Alt to temporarily activate the menu bar. You can also go to Firefox > Options and activate the menu bar full-time. You can also open your favorites using the hotkey Ctrl + B.

    If you want to permanently add a bookmarks button to the toolbar, you should watch section of the Knowledge Base on the customization of the toolbar.

    Hope this helps!

  • Adobe InDesign is unable to start because you don't have sufficient rights to folders preference

    ... Make sure you have sufficient rights and restart Adobe InDesign.

    Or something to that effect (in Finnish, error message right after I click the InDesign icon to launch).

    InDesign CC2015, Mac OSX El Capitan. I think it would be the first boot after the latest updates. I tried to delete the preferences (renamed), no help. Can't find InDesign SavedData all (no file or folder).

    CC has installed an update earlier and I am connected. Does not appear to affect of some sort.

    Any ideas? Thanks in advance.

    See does not start under new inDesign CC | Adobe Community drafting 11.0 Version where it says 9.0.

  • In Windows Live Hotmail, how can I changemy alturnative address because I don't have access 2 old e-mail address?

    In Windows Live Hotmail, I tried 2 update my profile .my alterniative email is cancelrd more a year ago. Hotmail sent to email conformation abandoned... What should I do? Don't want to lose my Hotmail. What should I do?

    Hey MaryJane Loshonkohl,.

    For assistance with the settings of your Windows Live ID, please join the Windows Live experts in the Windows Live Solution Center Community below.
    Windows Live Solution Center - Windows Live ID.

Maybe you are looking for

  • The browser Safari windows:-export Japanese character of file name are not displayed

    I am facing a problem on windows 7 safari browser. When I export the pdf file, the Japanese characters in the file name are not displayed.

  • Click satellite 10 - upgrding BIOS problem

    Hi all!I have a new toshiba satellite click on 10, but when I try to update the BIOS to 1.6 it pops up an error that says "update bios image is not valid in the current bios or flash secure does not support flash secure." What it means? How can I sol

  • need to buy a product key valid for windows xp pro

    Remember - this is a public forum so never post private information such as numbers of mail or telephone! Ideas: You have problems with programs Error messages Recent changes to your computer What you have already tried to solve the problem

  • ePSA question Pre boot

    While researching a slow start upward, I ran this test pre start of ePSA series.  There are only 98% before, I left.  I did see a very brief flash of a message which says "'waiting for completion DST".  After 2 hours, I stopped the test.  Is there a

  • Audit of permissions is caused a late start the Application

    Hello In my application, I register the Application with HttpFilter registry. So if I open a particular link, I go to the browser and back again to the application. Now, to do this, I created an entry point. And I take some permissions. Now the quest