I can't print after upgrade to Mac OS Sierra (error "Unable to filter")

Similar Questions

• Configuration error 1 after upgrading to Mac OS Sierra (Illustrator)

  Hello world

  After that I have upgraded to Mac OS Sierra, some of my Adobe software started crashing. Adobe Acrobat XI opens but unexpectedly stops after a few seconds. But above all, Illustrator does not start. I get the Configuration error message (error 1) and suggested to uninstall and reinstall the software (which doesn't help).

  I tried to change the permissions for the files SLStore and Adobe PCD. And indeed, the permissions for Adobe PCD have been set to read only for the admin.

  Unfortunately, change the permissions did not help. I get the same error message. Also, once I have reinstall the software, change the permissions to read-only.

  It happened just after upgrading to Mac OS Sierra. I have no backup, so downgraded to El Capitan is not an option.

  Please help, the standard solution has not worked for me and I need Illustrator to survive.

  (I use a Macbook Pro; 13 Retina display. end of 2015; 2.7 GHz Intel Core i5 processor; 8 GB 1867 MHz DDR3 memory)

  Elkoban if you create a new admin account you encounter the same error?  You can find details on how to configure a new account Administrator install or run Adobe applications in the new user account. Mac OS X .

• Not able to scan with the preview after upgrade from Mac OS Sierra...

  After upgrading to Mac OS Sierra. I'm unable to use the preview to scan.  Before this upgrade, it worked fine.  The HP scanner software does NOT work something like OS 10.8 or 10.9.  Preview worked perfectly so far.  If anyone knows how to solve this problem, your contribution will be greatly appreciated.  Thanks in advance.

  Have you tried scanning with Capture of Image instead? It worked for me.

• iMac freezes after upgrade to Mac OS Sierra

  I have a 27 iMac late 2009 ". After the transition to macOS Sierra, I got freeze about once or twice a day. The only way to get the system operational is again via a cold start. In this case, the pointer of the mouse still works, but otherwise, the system is not responding. I have never had this problem in 7 years using the same material, so a bit of a loss.

  How much RAM you have installed? You can check in the  menu > about this Mac. Slopes of the Sierra, but barely, with 4 GB, but it really needs min. 8 GB runs correctly.

  You can also try Safe Boot mode.

  -------

  Restart in Safe Boot mode by holding down the SHIFT key at startup. Secure boot is quite slow because the operating system performs some cleanup and verification tasks, so give it time. Once you're completely connected, restart normally.

• Bootcamp does not start after upgrade to Mac OS Sierra

  10 Windows fails to start after the update of the Sierra. Mac Mini end of 2012. Volume can be locked and dirty.

  Paragon NTFS is installed. How can this be repaired

  You can disable Paragon and test? If this does not work, please after the release of the following OS X Terminal commands.

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The command 'sudo' need to enter your password when prompted.

• Can't stop MacBook Pro after upgrade to Mac OS Sierra

  Yesterday I had upgraded my MacBook Pro since OS X El Capitan with macOS Sierra. Unfortunately I can't stop him, I can't even restart. Whenever I have start/stop I get a black screen (no slider) and it remains frozen. I have to hold the power button for a few seconds so that he will stop. I want to avoid cleaning the installation and configuring everything. Does anyone have an idea what causes this problem? I cleaned the cache and reset the NVRAM without effect.

  ... I cleaned the caches

  I recommend that you do not have this, especially with a 'clean' non-Apple utility. All these things can do is cause problems. A SMC reset will remove some files from the system cache: reset the management system (SCM) controller on your Mac. That's all that anyone should ever do.

  Back up your Mac if you have not already done so. Read https://www.apple.com/support/backup/to learn how to do this please. To learn how to use Time Machine read to use Time Machine to back up or restore your Mac.

  Then, shut down your Mac and restart in 'Safe Mode '. To learn how to do it please read: try safe mode if your Mac does not start-up. Compare works your Mac in Mode for how safe it was.

  Then restart normally. If the same problem comes back, please read the section If a problem does not occur in safe mode for actions recommended to Apple.

  Finally, you can temporarily create a new user account and log into this account to determine if the problem also exists when connected to this account. To learn how to read How to test a question to another user on your Mac account. When you are finished troubleshooting, you can remove the temporary user account by following these instructions: macOS Sierra: remove a user or a group. Before you delete, confirm that you have not need of all the files that you have possibly set in this account.

• After upgrading to Mac OS Sierra Verson 10.12 Dreamweaver Live View is extremely slow

  It's the iMac and MacBook Pro. The two machines are powerful and new.

  After the upgrade to the new MacOS Sierra seems incredibly slow on everything that Dreamweaver. Create a new page.

  The last time I had problems with Dreamweaver was energy, it has been fixed in an upgrade later. This time the problem is something else.

  Mode Live View shows not alive, must constantly keep Refresh and it's incredibly slow when it works.

  After a short then nothing works and you must restart Dreamweaver. It is a problem between the application and the system. Will it be fixed in the near future by Adobe or should I go the road big return to the old system.

  Others who have the same experience?

  Thanks for the reply. Now, I reformat my hard disk, install everything I need again. I use obtained and earlier Adobe help. At that time, he was well back, but it was solved later. I used Time Machine that had a problem.

  I prepare everything I need to take care of, so we'll see what happens. This time I use Time machine. Do problems after installation of Adobe once again, I'll contact the Support from Adobe.

  Thanks for all replies.

• Google Earth opens after upgrading to Mac OS Sierra

  Since the download and installation of maOS Sierra I find Google Earth does not work?

  see the following topics

  https://productforums.Google.com/Forum/#! rBa2c_LjgMI/cards/subject

  If the software is still not compatible, you must communicate with development of google and see if they plan to release a new version. Or if you have a Time Machine backup, you can restore your system to a point where the operating system and this app worked together. Past that Apple has no googles software and does not patch their OS to accommodate other developers especially when OS X 10.12 was available to google for months to make these changes.

  https://www.Google.com/Earth/download/GE/agree.html

• Matter of life of battery after upgrading to Mac OS Sierra

  I used my MacBook Pro retina 15 "end 2013 with 6-7 hours battery life. But after I have updated again macOS Sierra I am only 5 hours battery life... It's very disappointed, that if there is no solution, it will downgrade.

  Someone at - it solutions or suggestions?

  Someone at - it solutions or suggestions?

  Please read my battery life is low for some suggestions.

• At startup, the Apple iMac logo flashes red after update to Mac OS Sierra

  After upgrading to Mac OS Sierra, my 2015 iMac 21.5 retina has a flashing red Apple logo, then a brief splash screen flickering when starting. Once started, the computer seems fine, with no obvious debris. I don't know why the logo flashes red and then the screen flickers - bad drivers; a problem of software in the start-up phase; a problem with the drive of the merger; or maybe some other gremlin? A quick search on the internet reveals that at least a few others have the same problem with this version of the OS, and it seems to have occurred in the years spent with any other version of Mac OS upgrades. But there is no good answers on how to fix this. I rebooted several times hoping it would clear itself, but no luck.

  Safe Mode boot removes the system caches that can help after an update or upgrade.

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

• After upgrading to MAC Mountain Lion, the drivers for my HP C4680 were removed (accidentlly)

  After upgrading to MAC Mountain Lion, the drivers for my HP C4680 have been deleted (accidentally). I downloaded the drivers from HP, but my Macbook it not install because the drivers are not available on Mac Store. How can I get the printer installed?

  Hello

  First of all, make sure you restart your Mac, and then try to add the printer again.

  If it persists, ensure that the USB port directly connected to your Mac and not via a USB hub or extention.

  Ensure that the USB is not longer than 2 m and check to see if that can help you.

  Also, if you have an iMac, be sure to plug the USB in the port at the back of the Mac and not in the Apple keyboard, which is not powered.

  Also, try to reset the printing system, then try to add the printer and check any changes:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.

  Click on the Apple menu and then click on System Preferences.
  Select Print & Scan.
  Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

  Now, click on the Plus sign and try to re-adding the printer.

  If none of the steps above does not lead to any progress, go to the library and place the HP folder to the trash.

  Enter PPD\Contents\Resources, search for C4600 and move the files to the trash, then try to add the printer again.

  Hope that helps,

  Shlomi

• Cannot print after upgrading to Sierra

  After the upgrade to Mac OS Sierra yesterday, I was unable to print on my Canon Pixma MX892. The Canon site says there is no update driver for this OS. When I try to print, I get an error "Failed to filter" and my printer spits out a blank sheet.

  Finally, I am informed that cgpdftoraster crashed.

  Taken from the Canon Website:

  "Canon is working with Apple to solve some problems of compatibility between Mac OS X Sierra 10.12 and printer drivers for Canon PIXMA inkjet printers.

  Everything is actually to solve these problems.

  Deeply, we apologize for any inconvenience you may encounter.

  Please see ourKnowledge Base article on how to print correctly with Mac OS X 10.12. »

• All-in-one HP Officejet 4635: my HP Officejet 4635 all-in-one printer does not print since upgrading to Mac 10.10.1.

  All-in-one HP Officejet 4635 does not print since upgrading to Mac 10.10.1. Any suggestions? Thank you!!!

  Hi brenHP4630,

  You might want to try updating the driver for your specific operating system. You can find the download HERE.

• Cannot print after upgrading to Windows 10

  Pleae help, I can't do my printer print after upgrade from Windows 7 to WIndows 10.  I have a HP officejet Pro 8600.  I downloaded a new drivers, etc, and nothing works.  Help, please

  Hello Kathy,

  http://support.HP.com/in-en/drivers/selfservice/HP-OfficeJet-Pro-8600-e-all-in-one-printer-series-N911/4322914/model/4323658

  The link will help you to download the latest drivers. Make sure that your operating system indicates Microsoft Windows, Microsoft Windows 10. If it shows any other OS, please click the Edit link to the right and select Windows 10 in the menu drop-down, and then click Update. After that Windows 10 if poster as your operating system, you can click on the download to start button to download the latest drivers. I hope this helps!

  Although I am an employee of HP, I speak for myself and not for HP. * say thank you by clicking on the "Bravo!" Star"located on the left * make it easier for others to find solutions, marking my answer to"Accept as Solution"if it solves your problem.

• Unable to find PDF printer after I installed Mac CS6 in my MacBook Air... Please help ~.

  Hello... Unable to find PDF printer after I installed Mac CS6 in my MacBook Air... I had CS4 (Windows) before, but it comes with the printer PDF ~ can anyone help? Thank you...

  What is done on the Mac, is to use the PDF button in the print dialog box, and then select SAVE it in ADOBE PDF drop-down choice. This is equivalent to printing to a postscript file and running through Adobe Distiller.