I can't register my device in the public beta program

Similar Questions

• How can I remove me from the public beta program

  From Googling, it seems that I have go to System Preferences and click on App Store, where I should see an option «your computer is configured to receive seeds of pre-release software update» However, I do not see this option

  Hi Tony,.

  Looks like you want to get out of the public beta program for your Mac. Is this fair?

  This page of the FAQ has instructions for leaving the program - Apple beta software program

  Specifically -.

  How can I leave the Apple Beta software program?

  To exit the program, visit the Unenroll page and follow the instructions to remove the Apple Beta software program of your Apple ID.

  You can also reinstall a version of Mac OS X on your computer-

  How to make a version of Mac OS X on my Mac?

  Always back up your computer before you install the beta software. To obtain release of the shipment of Mac OS X on your Mac, you can simply install the final version of the software you're testing when it appears in the Mac App Store. If you want to return to a previously published version, you must first delete the beta software, then re-install the latest version of Mac OS X and finally restore from your backup Time Machine.
  Learn more about how to erase and install OS X 
  Learn more about how to restore from a Time Machine backup

  Thank you for using communities of Apple Support.

  Best for you.

• Continues to receive updates beta of MAC OS x in the App Store even if I reconnect my mac from the public beta program

  Hello

  I'm still getting updates beta of MAC OS x in the App Store even if I reconnect my mac from the public beta program. The option to receive these updates beta is no longer available in my preferences system, as shown here:

  https://www.igeeksblog.com/stop-OS-x-beta-software-update-notifications-in-Mac-a pp-store.

  Any suggestions?

  Thank you

  Restart your Mac, then see if these updates appear again.

• How can I add a device of the anther

  How can I add a device of the anther

  Hello

  "If you paired with your Apple Watch but who want to use it with another iPhone, you can transfer your Apple Watch and its contents to your new iPhone.

  Instructions here > set up your Apple Watch

• can I have a tile in windows 8 for facebook and twitter? Also, how can I add a device in the devices on the right side?

  I would like to a tile on the homescreen of Facebook and Twitter (I don't see an APP for either).  I can do this and if so, how?

  How can I add a device to the peripheral icon on the right side?

  Dear NelliBli46,
  Welcome to the Microsoft community!
  
  Question 1: For Facebook and Twitter tile question.
  
  You can get your Facebook account and Twitter RSS directly on your screen to start using applications Photos and people.
  These links help you to configure the applications.
  For the Photos App:
  http://Windows.Microsoft.com/en-us/Windows-8/photos-app-FAQ
  For the purposes of people:
  http://Windows.Microsoft.com/en-us/Windows-8/people-FAQ
   
  
  Question 2: To add a device to the peripheral icon.
  
  You can use this link to add devices to your computer
  http://Windows.Microsoft.com/en-us/Windows-8/Add-device-or-PC-to-network
  
  Once you add a device, under devices in the charms bar you will see what options or devices are available according to the open app or window.
  
  If you still have questions, feel free to contact us.

• I can't add a component from the Add Remove program window as says could not initialize winxp

  I can't add a component from the Add Remove program window as says could not initialize winxp

  My victory is xp professional ver 2002 service pack 3

  It's usually easy to fix, but if you removed all the dll and inf files, you can have a bunch of other problems that you have not yet discovered.

  If you mean when you try to use Add/Remove Windows components you see a message like this:

  Install was not able to load the master file.
  The application could not be initialized.

  This happens because this file is missing:

  c:\windows\inf\sysoc.inf

  There is no copy backup of this file on your system and run the System File Checker will not replace the missing file (sorry, that Microsoft committed Support Engineer 'experts').

  You will need to get a real copy of your XP bootable installation CD or from a reliable source.

  There's a copy on my SkyDrive, you can download - here's how:

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, put a copy of the file in this folder (assuming that Windows is installed on your C drive):

  c:\Windows\Inf

  Here is the link to my SkyDrive and you can get the file you need here:

  https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file named sysoc when the name of the file should really be called sysoc.inf (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You must then copy and paste the downloaded folder appropriate on your system.

• I leave the public beta without restoring?

  I had no problem with version beta, so I do not need to downgrade my phone. I wonder if I can just unregister then wait for the next general release with a higher than the build that I'm on. Say so let the public beta, once the official iOS 10.0 is released, will be my offer to phone me the regular version of 10.0.1 when coming out a few weeks later? Or I'll be in a limbo land where is no update available again?

  You can wait for the official release.

  See the following information to https://beta.apple.com/sp/betaprogram/faq

  Always save your iOS device before installing the beta software. To obtain a release of the expedition of the iOS on your iPhone, iPad or iPod touch, you can simply install the final version of the software you're testing when it appears in the software update. If you want to return to a previously published version, you must first delete the beta software, and then re - install the latest version of iOS and finally restore from your backup iTunes saved previously.

• always displays the public beta updates

  Hi, I followed the steps to UN-room my mac public beta program. But I don't see yet macOS Sierra updates in the mac app store. How can I solve this?

  In a test of the Terminal window:

  sudo softwareupdate - clear-catalogue

• Can I register my device without any previous backup?

  I took my camera to get ios 9.2 beta 4 and now I want to fully register my device but I have no backup before registering my camera. How can I unsubscribe completely my camera without any backup? (I have no backup)

  Delete the Beta profile:

  eyyings > General > profile

  then upgrade to the version of iOS 9.2 in:

  Settings > general > software update

• Can I register my device without any backup fully?

  I took my camera to get ios 9.2 beta 4 and now I want to fully register my device but I have no backup before registering my camera. How can I unsubscribe completely my camera without any backup?

  Hi, TTN97.

  Please visit Apple support communities.

  I you have see wish to participate in the beta of iOS software program and care about your data because it wasn't a backup prior to registration.  I have some good news!  Since iOS 9.2 is the most recent version, you just go through the following steps.

  Download the final version of iOS

  If you have a beta version of iOS and you want to download the final version, follow these steps:

  1. Connect your device to iTunes.
  2. When your device is connected, force it to restart. Press and hold buttons sleep/wake and Home at the same time. Don't release when you see the Apple logo. Keep now until you see the Recovery Mode screen.
  3. When asked, choose updates to download and install the latest version of iOS nonbeta.
     An update installation does not affect your settings or content.

  Any software beta iOS

  Even if these steps will not affect your content and settings, it is always recommended to create a backup [before any update.

  How to back up your device using iCloud or iTunes

  See you soon

• How can I get my device to the Profile Manager list to a .csv file?

  Hello

  I have Apple Profile Manager configured as my MDM solution and I have created dozens of groups of devices for about 500 aircraft.

  Now, I need to get a list of my devices (names, serial numbers and groups) for a file that I can read and edit with Excel. As a ratio of registered MDM devices by device groups...

  I've not found tools in the server itself for this report. I looked on the internet and I managed to run a console command that created a .sql dump of the database, but this is where I am stuck. I can't seem to find a way to correctly convert this .sql file into a .csv or .xhtml or whatever it is readable.

  Can someone help me how to do this?

  I've got covered you.  You must connect to the database and clear the records you want.  It's easy.  Follow these steps:

  1: connect to the database

  sudo psql - U _devicemgr d devicemgr_v2m0 h/Library/Server/ProfileManager/Config/var/PostgreSQL

  This allows you to enter the interactive shell.

  2: select the database you want to interact with

  \c devicemgr_v2m0;

  3: dump all the data on your devices.

  Select * from devices;

  4: If you want the names and serial numbers, use:

  Select "DeviceName", "SerialNumber" of devices;

  5: when to leave the shell

  \Q

  Many data are there.  Be careful.  Don't use that selects them.

  Reid

  Apple Consultants Network

  Author of "El Capitan Server" - Foundation Services: available exclusively in Apple iBooks Store

  Author of "El Capitan Server - Collaboration & control": available exclusively in Apple iBooks Store

  Author of books of Yosemite server and server Mavericks

• Windows 7 network can't see multiple devices on the network

  Hi all.  I'm about to leave my hair on this issue - I hope someone can prevent the horror that would be me without hair.

  I am running Windows 7 Home Edition on a personal computer that is connected via cable to a router UVerse also providing my home with wireless services.

  A few months ago, I could see - of my PC, network and devices and printers - the two PS3, XBox systems and Samsung TV devices that are connected to my wireless network.  Apparently randomly, my computer has ceased to be able to see these devices.  After trying everything I could think of, I've finally reformatted the system (before Christmas) and everything was good again until last week when my computer stopped once more to see these devices.  I * really * don't want to reformat my system again...

  Here are some details on where I started after the last reformat:

  The PC is connected to a homegroup.

  The PC has a wired connection to the router.  The devices are connected over wireless.

  The firewall is turned on.

  AVG anti-virus has been activated.

  Network discovery, file and sharing printers and streaming media are all enabled.

  Password sharing is disabled.

  Devices could stream Netflix/Hulu as well as files on my computer (using the PlayOn Server - I've never used WMP).

  Now my devices can still Streaming Netflix/Hulu, but not the files on my computer.  The PC can't see the devices and the devices cannot see the PC.

  Here is a list of most of the things I've tried to solve (although I've done so many things, I probably don't forget some):

  I added the PC to the wireless network, so now that it is connected both cables and wireless.  I even tried to fill these connections, although I removed the bridge when I saw that there was no difference.

  I have disabled the firewall completely.

  I disabled the AV entirely.

  I switched a residential group to a working network and vice versa.

  I gave you the assigned IPs devices in the router configuration.

  I've rolled back all the windows updates installed since the last time the devices showed in the PC network.

  I've removed the devices on the network, reconnected the and reconfigured to ensure that they have the media streaming (if applicable).

  I did several reboots the PC, the router, and devices.

  I added the PlayStation Network and XBOX Live and applications hosted under NAT/game on my router.

  I have enabled file sharing for devices that use 40 encryption or 56-bit.

  Additional troubleshooting information:

  When I try to add a device using the Add Device dialog box, no device never shows.

  Under media streaming options, when I look at instruments under all the networks and Local network, no unknown device only shows (even in WMP).  All devices that * show are already set to 'allow '.

  If I have access to my router configuration, the devices will appear as connected.

  I can ping devices from the PC.

  I searched endlessly on the Internet (including other threads on this forum) and have tried all of the suggestions I thought.  The only thing I can't do is activate uPNP on my router because routers Uverse do not offer this option.  However, I don't think that it's important because my PC could see these devices for some time after my last reformat and made no changes to the configuration of the router.

  Because multiple and different wireless devices are involved, and because a reformat solves the problem, in my view, it is a Windows problem, but I can't understand what to change on my system to make things work again.

  Anyone have any ideas?

  Hello

  Thanks for posting your query in Microsoft Community.

  It's a shame that you have to format the system first and now, the problem still persists. I really appreciate the efforts made to try to resolve the problem. This can be due to any dispute of third party software due to which the connection failed. I suggest you follow the methods below and check.

  Method 1: Run the network troubleshooter to diagnose the problem.

  Run the network troubleshooter

  Method 2: start the computer in safe mode with network and then perform the clean boot.

  Step 1: restart the computer in safe mode with network and check if the problem occurs, proceed as in the link:

  See: , start your computer in safe mode

  Step 2: If the safe mode with network works, perform clean boot and check if any third-party application is causing problem.

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Method 3: To enable the network devices to display on the network map, they must meet four requirements:

  • Must be a HOME network or work: Mapping network only display the devices connected to a HOME network or WORK location. Devices connected to a network PUBLIC or FIELD cannot be displayed using the network card.
  • Devices must be DETECTABLE: The network discovery setting allows devices to be able to be seen by other devices on the same network. For more information, please consult: , enable or disable network discovery
  • Devices must comply with the LINK LAYER TOPOLOGY DISCOVERY Protocol: Topology Discovery LLTD (Link Layer) is a protocol developed by Microsoft to enable networked devices to 'discover' each other. If a device does not use the LLTD protocol so it can not be displayed in the network map. Windows 7 computers have the LLTD protocol implemented.
  • LLTD must be enabled on your LAN connection properties: The Link Layer Topology Discovery Mapper of e/s driver and the Link Layer Topology Discovery responder must be enabled on your local area connections properties panel.

  To check LLTD is enabled, you can refer to the following steps:

  a. Select open network and sharing Center by clicking on the icon of your network down to the right of your task bar:

  b. now, click connect to the Local network

  c. now, click on Properties

  d. ensure that two LLTD options below are selected (by default, these options are still enabled in Windows 7).

  From now to try the methods above and let us know the status. We will be happy to help you further.

• How can I recover my data from the C drive program folder?

  It has been deleted accidentally and therefore, the necessary tools for MySQL etc are no longer available. Also I can't access administrative tools of the control panel may be for this reason.

  If it's not in your recycle bin and you have no backup of the image, then... oh dear :(

• How do you spend the Public Beta Tester for Apple Developer?

  I've recently become an Apple Developer! I used to be a Public beta tester. How to place my iPhone to the Public 10 iOS to iOS Developer 10 from my account?

  Congratulations on how to become a developer! To switch programs, follow the instructions on the beta page to unregister your device (make sure that you delete the profile as well), go to the Developer Portal, register your device and install the profile. You should be good to go!

• How can I register my product if the serial number has only 20 digits?

  I bought a Sony Vaio notebook nine several years comes with Photoshop Elements, Premiere Elements, Acrobat, Distiller, and pre-installed drive. I am now upgrading Windows 10 and would like to be able to install these programs if something should go wrong. I have of course no CD case or emails with serial numbers that these programs were already on the laptop. So I got the serial numbers for Photoshop and first of the sections About each program (Acrobat, Distiller and Reader do not show the serial numbers). Then, I tried to sign up for Photoshop Elements and Premiere Elements, but cannot do so because the site indicates the serial numbers should be long of 24 digits, and them I found in the comments sections are only 20 characters long. I guess to reinstall these programs that I'll need to have the products on the site, is that correct?

  Any help would be appreciated.

  If the e cam software with the machine, it is likely that can only be used for this computer... software, but which must be defined as part of your purchase of the machine thus agreement terms of use could be documented for you somewhere.

  Displayed in the connection option serial numbers aren't going to be series of application numbers.  You will need to contact the seller who has sold you the device in order to see what options you have to re - acquire the software.  As I said, you are likely to find that your permitted use is limited to the machine that was purchased.