I can't save files more after the upgrade to iOS8. Do I have too many on my iPad?

Similar Questions

• CalendarAgent close unexpectedly and more after the upgrade to 10.11.5

  After the upgrade to 10.11.5, I get popup after popup stating "CalendarAgent quit unexpectedly" (forgive the change of fonts copy paste)

  He's going to stay here until I have click and then within 10 seconds, it will return. After reboot, after forcing reboots, nothing I've tried so far solves the problem.

  Anyone else having this problem?

  joelb

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, clear the search box, and then select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• A Web site cannot be displayed more after the upgrade to version 14.01

  I use www.kpnvandaag.nl as a homepage. After the upgrade to version 14.01 this site and only this site will show no more. When go to this page, an error is displayed that says, translated freely: there is an error.
  This page cannot be displayed.

  What is a Web site or Firefox (or other causes) error?

  You may also need to check the settings I n your security software (Norton) to ensure that nothing is blocked.

• Engravers Blu - ray Samsung SE - 506 Monte is more after the upgrade of the El Capitan

  Hi all

  MBP, in early 2008, El Capitan 10.11.2...

  My Samsung Portable Blu - ray writer, SE-506CB/RSBD Monte is more after I upgraded to El Capitan, last week.  The drive itself is only a few months old.

  The problem is not the USB ports, like other devices work fine with all the USB ports on my MBP.

  Note that I'm NOT trying to read or write a Blu - ray disc.  I try only to play audio CDs, I've done successfully before the upgrade to El Capitan.

  Someone had this problem?

  Thank you...

  For what it's worth, I have this problem as well.  The drive tray would not eject even with a single cable, so I switched to another.  I could then open the drawer (seems odd for me) but the disc would not rise.  Here's the info from the console log that indicates that the operating system is getting bad feedback from the pilot saying that the disk is defective.  This same drive/cable/disc work very well on my MacBook Air 10.10.5 and had worked perfectly well with this MBP even before the service (and "free" upgrade to EC by Apple).

  Console

  09/01/16 12:34:49.000 kernel [0]: AppleUSB20HubPort@fa130000 011849.735343: AppleUSBHostPort::resetGated: a new attempt to list 100 MS

  09/01/16 12:34:50.000 kernel [0]: AppleUSB20HubPort@fa130000 011850.924723: AppleUSBHostPort::resetGated: a new attempt to enumeration in 200ms

  09/01/16 12:34:51.000 kernel [0]: AppleUSB20HubPort@fa130000 011852.236095: AppleUSBHostPort::resetGated: a new attempt to enumeration in 400 ms

  09/01/16 12:34:52.000 kernel [0]: USBMSC (non-unique) identifier: (Korean characters removed) 0xe8d 1956 0 x 0 x 0, 2

  09/01/16 12:35:10.000 kernel [0]: disk3: alignment error.

  09/01/16 mds 12:35:12.432 [74]: (Volume.Normal:2464) volume: 0x7ffc330a4c00 * initiated creation of occluding a default location: 1 SpotLoc: (null) SpotVerLoc: (null): 0/Volumes/ENTOURAGE

  09/01/16 mds 12:35:12.456 [74]: vsd:0x7ffc33173400 (Volume.Error:577) open failed.  failureCount:0 (null)

  09/01/16 12:35:23.000 kernel [0]: smb_smb_ssnsetup: GROUND does not support extended security, this server will be deprecated in the future!

  09/01/16 mds 12:35:27.471 [74]: context of recycling: 0 (Volume.Normal:166) vsd:0x7ffc33173400 DisabledStore: {}

  DisabledRecycleCount = 1;

  }

  09/01/16 mds 12:35:27.502 [74]: vsd:0x7ffc338c6000 (Volume.Error:577) open failed.  {failureCount:1}

  DisabledRecycleCount = 1;

  }

  09/01/16 mds 12:35:57.502 [74]: (Volume.Normal:166) vsd:0x7ffc338c6000 DisabledStore recycling: 2 context: {}

  DisabledRecycleCount = 2;

  }

  09/01/16 mds 12:35:57.540 [74]: vsd:0x7ffc308c8400 (Volume.Error:577) open failed.  {failureCount:2}

  DisabledRecycleCount = 2;

  }

  The drive works perfectly well with this disc in 10.10.

• BlackBerry Smartphones can not sync with Outlook after the upgrade to AT & T 4.5

  After the upgrade to AT & T 4.5, everything seems to work OK except synchronization.  Everyone I have a problem and you know the solution?

  Thank you

  Lee

  AT & T recommends only 4.6 because they have no brand yet their own 4.7. Only difference 4.7 is the loader program whish has been updated and supports the 83xx series perfectly well... regardless of which operator, and Yes, she fully supports the device software 4.5.

  I saw a help tip in situations like this before that might be useful, however need you to installed 4.7 as this option is available in this version. IF you do not already have a backup, do one now.

  Start-run-cmd

  type: cd c:\program files Research in motion\apploader

  then type: /resettofactory loader.exe

  After that, make sure that DTM is closed, delete the intellisync folder new, open DTM, synchronization of the configuration and try to synchronize again.

  Try to do the sync BEFORE and AFTER restoring your backup

• Why is not synchronize Lightroom CC more after the upgrade?

  Hello

  I recently upgraded to Lightroom and since no photos to sync to the cloud. It says on the desktop app 'x Sync photos' but nothing ends on the cloud or mobile devices (Android). I can see the names of collection, but not photos. I followed the various Councils of deleting file of data synchronization and data to mobile devices, but without success. Before the upgrade everything worked well. Can anyone help?

  Could you please send me a journal diagnostig Desktop LR - better as a private message with a downloadable dropbox link.

  You can trigger the newspaper through Desktop LR-Mobile with Lightroom > preferences, and when you hold down the ALT key, you will notice a diagnostic log button to generate

  This problem occurs when you are connected via ethernet or wifi? BTW. Does the job of synchronization for your with an earlier version of Lightroom?

  -

  Guido

• Satellite L305-S5968 - after the upgrade to Windows 7 I have not access to Internet

  I really need help.

  I got my disk to upgrade to Windows 7 yesterday, and I ran everything that he said. The upgrade wizard does everything what it was supposed to, the computer rebooted, installed everything correctly and my initial startup of Windows 7 was very well, everything worked perfectly and then suddenly I could no longer connect to the internet via wifi more and my USB keys do not work.

  I checked the drivers and reinstalled everything but it still doesn't work.

  My laptop is a Satellite L305-S5968 any help would be greatly appreciated.

  Hello

  I founded the same issue here, and first of all, you should read this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=49617

  Also, make sure that the WIFI is enabled with the material and the FN + F8 key combination switch.

• Can't duplicate a sheet after the upgrade to Sierra

  Hi, the double sheet is grayed out on my MacBook Pro after update for Sierra. Not sure if it's the Sierra or something else.

  I was not a regular numbers 3 or 4 user so I do not know the location of the command menu, that you are referring, but I just tried it on a new document numbers 4.0 in the Sierra by right-clicking the tab of the sheet without problems.

  

• Some of my files pdf (since the upgrade to Acrobat CD player) have dimmed white. How can I get rid of this so I can read what is erased?

  I installed Acrobat Reader DC version 2015.007.20033 on May 3, an upgrade to the previous version (which worked perfectly). Now, some of my PDFs have gray blocks obfuscate text (which I imagine is currently hidden by blocks). In some cases, the entire document is illegible. That's happened? How can I get rid of the problem?

  Try going into preferences > Page display > content and information of the Page and don't forget 'See the large images' are checked.

• Can I keep InDesign 2014 after the upgrade?

  If I update to CC2015 will I still be able to use the InDesign 2014 version to use for clients who have not updated?

  Yes, but be aware that installer in removing your versions, the default value will be so must change it before you click OK on the new facility for CC2015

• After the upgrade to Firefox 10.0, hyperlinks on many web pages do not work.

  I click on a hyperlink on the site of Kaiser Permanente or the websire of ADP resources and nothing happens. On the Humana dental website, hyperlinks work, but the page is totally messed up. The Yahoo home page is a mess as well

  Everything worked fine in the works of 5.5 and still very well either

  You can attach a screenshot?

  • http://en.Wikipedia.org/wiki/screenshot

  Use a type of compressed as PNG or JPG image to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode

• After the upgrade to v10 folders appear, but nothing happens when I click on the folder

  I organize my favorites in all 7 or 8 files. After the upgrade to Firefox v10 a few days ago, I find that the records are still on the list but that it will be will not develop. When I open the bookmarks library and select a record, he mentions the description of sites, but no URL. I tried to restore bookmarks in before the upgrade, but I get message "cannot process the backup file. Fortunately, I also store my favorites in MS OneNote, but I don't want want to re-create if I am likely to lose them again. I also installed the Norton toolbar.

  By adopting a belt and Suspenders approach allows first of all make sure you have everything backed up. Have several copies, is the best way to ensure you have the most relevant and the most recent available.

  • manual backups of existing bookmarks and this BEFORE and after any attempt of restoration, know that restorations replace existing bookmmarks
    • See restore bookmarks from a backup or move them to another computer
  • Make a copy of your profile and put somewhere safe, outside the program paths and the firefox profile (Windows desktop is somewhere appropriate) include all subfolders and files (including copies of backup of bookmarks and bookmarks database itself)
    • See back up and restore the information contained in the profiles of Firefox

  I have not personally noticed reported problems specific to the Firefox 10 updates causing problems with bookmarks. Maybe a few extension you have involved, but whatever the cause you could now have corrupted or old installed bookmarks. If it's a - problem, you can restore your bookarks ok, but if a problem persists, you will need to continue the investigation. If you continue to say daily manual backups that you know that the worst cases, is that you lose only part of a days bookmarking.

• HP Photosmart C6280: cannot print on C6280 wireless after the upgrade to Windows 10

  Cannot print on C6280 wireless after the upgrade to Windows 10. Have removed the device, but try to re install the printer when is not found. Can print if I connect USB. Tried to reload the driver using HP Support software help, but when he arrives at the end of the download fails.

  Hi @Ron9871,

  Welcome to the Forums of HP Support!

  I see that you are unable to get your printer HP Photosmart C6280 wireless printing. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I would like to try the steps in this guide, "offline" Status Message printer (Windows 10).

  If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  • Print a Page of Network Configuration menu of the printer front panel. Note: the IPV4 IP.
  • Type the IP address in the browser to bring up the SAP.
  • Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
  • Select Manual IP.
  • Enter your IP address manual (192.168.0.232)
  • Enter 255.255.255.0 for the subnet mask, except if it is different.
  • Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
  • Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
  • Click on apply.

  Please restart the router, the printer and the computer in this sequence.

  If you're still having problems, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  • Use the File Checker system to repair missing or corrupted system files. It's always a good idea to back up your data before proceeding.
  • File system check (SFC) analysis and repair system files & DISM to fix things that are not SFC.

  You can try to change your WSD printer port by a Standard TCP/IP port.

  To do this, you will need your current IP address printers.  The Network Setup page shows the parameters of network for the product. To print this page; Press the button of network () on the control panel of the product.

   

• I just reinstalled Adobe Acrobat X 1 and I can't save files PDF that is sent to me. I just get "this document cannot be saved. There is a problem reading this document (21)"and then when I click OK I get 'not enough for the image' help!

  I just reinstalled Adobe Acrobat X 1 and I can't save files PDF that is sent to me. I just get "this document cannot be saved. There is a problem reading this document (21)"and then when I click OK I get 'not enough for the image' help!

  More information on this issue can be found here:

  https://forums.Adobe.com/thread/1672655

  A "quick" fix that worked for me was to uninstall Adobe... and download Adobe Reader 11.0 installation base.

  Then download each individual updates and run them sequentially.

  I installed back to the last update of security which is version 08 and were able to register under normal operations.

  You will need to disable the automatic updates to keep up with the 08 version, until Adobe fixes this problem in a future release.

  http://www.Adobe.com/support/downloads/product.jsp?product=10&platform=Windows

  Adobe Reader 11.0 - installer multilingual (MUI) AdbeRdr11000_mui_Std

  Adobe Reader 11.0.01 update - installer multilingual (MUI) AdbeRdrUpd11001_MUI.msp

  Adobe Reader 11.0.02 update - all languages AdbeRdrSecUpd11002.msp

  Adobe Reader 11.0.03 update - installer multilingual (MUI) AdbeRdrUpd11003_MUI.msp

  Adobe Reader 11.0.04 update - installer multilingual (MUI) AdbeRdrUpd11004_MUI.msp

  Adobe Reader 11.0.05 - all languages AdbeRdrSecUpd11005.msp security update

  Adobe Reader 11.0.06 update - installer multilingual (MUI) AdbeRdrUpd11006_MUI.msp

  Adobe Reader 11.0.07 update - installer multilingual (MUI) AdbeRdrUpd11007_MUI.msp

  Adobe Reader 11.0.08 - all languages AdbeRdrSecUpd11008.msp security update

• HP workspace: can users save files directly on their Elite x 3 HP or on a USB key using the workspace?

  Hey everybody,

  Can users save files directly on their Elite x 3 HP or on a USB key using the workspace?

  Thank you

  Bill

  Yes. Users can save files between workspace of HP and the HP Elite x 3 device or on a USB key.