I can't scan with hp psc 1402 all-in-one

Similar Questions

• Scanning with HP PSC 2355 all in one printer/scanner/copier.

  In XP, the software enabled mutiple scans (in pdf format) to a single file. Is there an option in windows 7 to do scans of mutiple in the options of the printer?  Is there a way to get an output of pdf file?

  You want to scan multiple pages into a pdf file?  The 3rd party below program works with most scanners.  It sells for $ 29.95.  You can download a free 30 trial to try out it if you wish.  (I looked for a program free and tried a bit, but none were any good.)

  Scan to PDF
  http://www.softi.co.UK/
  --

  "Bobbudden" wrote in the new message: * e-mail address is removed from the privacy... *

  In XP, the software enabled mutiple scans (in pdf format) to a single file. Is there an option in windows 7 to do scans of mutiple in the options of the printer?  Is there a way to get an output of pdf file?

• HP 2210 printer all-in-one: after updating WIndows 10, I can print but not scan with my HP 2210 all in one

  I've updated to Windows 10 and since then I can print but not scan with my HP 2210 all-in-one printer.  I tried to download the software updates, but nothing seems to work.  Any suggestions

  Hi @Sajapand @ddegan

  I see that you both scan problems after upgrade to Windows 10, and I may be able to help.

  Most of the products have updated software available on the HP support Web site for Windows 10.

  I also saw a few posts that say Windows 8.1 driver works for Windows 10 as well, then you could try also.

  HP provides a free tool called HP Print and Scan doctor to diagnose and troubleshoot printing and scanning problems. I recommend you to download and run the HP print and Scan Doctor , if she doesn't fix it automatically I would know what errors or messages that you receive.

  Do you know if you are able to scan using paint?

  To perform a scan of the painting: HP Multifunction printers - how Scan: Windows 8

  (This is the same for Windows 10, of what I said)

  1. Click the Start button () in the lower left corner of the screen, click on Searchand type Paint.
  2. Click on the painting in the results.
  3. Click fileand then click on from a scanner or camera.
  4. Select your printer, click OK, and then click Scan.

  Please let me know if any of these steps has resolved your problem, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• scan several doc page on vista with hp psc 1215 all-in-one

  I have Vista 32-bit with SP2 and a printer all-in-one hp psc 1215.  There is no driver to download, the printer works under Vista.  I understand that I may use just mspaint or windows photo gallery to scan to the computer.  Is there a way to scan multiple pages in a doc for sending e and recording on the computer?

  The only formats I can see painting and Win Photo Gallery are bitmap, jpeg, gif, tif and png.

  My computer expertise not much!

  Hello
  
  There are many alternatives like this
  
  
  
  You can download this free software from the following link:
  
  http://en.pdf24.org/pdf-editor.jsp

  If plain text, you can edit PDFs too.
  
  Kind regards.

• Scan with a HP 5610 all in one

  I have a HP Officejet 5610 all-in-one.

  After I turn it on and press the button "Scan" of the Control Panel, I get the Message 'No. Scan Options' and I can't further with the sweep. Installation copy works OK. I also tried to disconnect the device from the mains for more than a minute and then reconnect. But all the same.

  Does anyone know the solution to this you problem?

  RTL

  Hey ricmalta,

  I see that you have an Officejet 5610 and the scan settings have been reset on the printer.

  What is the operating system of the computer connected to the printer?

  How do you have the printer attached to this computer?

  You have the full software functionality for the 5610 installed on this computer?

  I would advise to take a look at the document below the link to get the procedure to resolve this problem.

  A 'no. Scan Options' or "scan settings are not defined" Message displays on the all-in-one

  Let me know how it goes,

  Jason

• How can I scan and print from HPB110A all-in-one for windows 7 in windows 8

  Hello

  You have a problem with my HP all-in-one printer, which has been used for my old laptop in win 7. The new laptop has win8, how can I use the all in one win8.

  WIN8 does not recognize.

  I need to scan a document to my laptop.

  Anyone who nows a solution for this.

  Thanks in advance.

  Hello

  Install the printer software on Win 8 of the link below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4132&LC=en&cc=us&DLC=en&sw_lang=&product=4022343

• Problem scanning with HP Officejet 5610 all in one

  I have problems with the scanning of documents.

  Computer is Mac OSx Version 10.8.5 operting.

  I use to be able to analyze only the documents that have been placed on the glass and I would press the button "scan" on the printer and the document would scan to my counter top.  I could not scan several pages by feeding in the upper part of the printer.  It was with my old Mac operating system.

  Recently, I had the SW on my MAC update to OSx.  Now I can go into the settings of the printer and scan several pages unless I have a document in the feeder at top of the page.  But I can not put a single item on the glass, then press scan.  I get the error message is 'no scan options.  Refer to the documentation for the device to trobuleshoot.  Press ok. »

  Any help?

  Hi pbeachiii,

  I'm sorry to tell you that HP does not provide driver support of technologies for analysis of your product on the Mavericks.  This solution does not provide support for the scan on the printer button.

  You can ensure the best experience with your product by accepting the Apple software updates so that you have the latest available print and scan drivers.

  Use the Image Capture or preview applications to begin analysis of your Mac.  With one of these applications, you should have the ability to scan from either the glass of the scanner or the document feeder.  You just need to specify the source for analysis as a parameter in the scanning software.

  Hope this helps,

• Scanning with Canon PIXMA MX870 all-in-One printer using Windows 7 64 bit

  The computer is unable to recognize the scanner.  The message I get is "cannot communicate with scanner for these reasons - scanner is turned off - scanner is disconnected." Code 2,145,50 "impression is generally OK.  Help.

  Have you tried canon support?

  http://www.USA.Canon.com/Cusa/consumer/products/printers_multifunction/office_all_in_one_inkjet_printers/pixma_mx870#ServiceAndSupport

• PSC 2210 all-in-one: PSC 2210 all-in-one with Windows 10: ok printer but the scanner does not work

  
  

  Hey @Manu37520,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the scanning of your PSC 2210 all-in-one printer to your PC for Windows 10. The printer has no drivers for Windows 10. You will need to use a computer with an operating system prior to analyze.

  Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Is it possible to set up in windows 7 for my printer HP psc 1315 all in one...?

  .. .or is not possible, and it is best to think about to buy a new printer!

  I was wasting far too much time trying to set up many "good drivers" for this device and will never work ok

  My question is simple: "there is a device that works well with HP psc 1315 all-in-one Windows seven?

  Thanks in advance ;-)

  Peter

  IF this is your printer/scanner - http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4062&lc=en&cc=us&dlc=en&sw_lang=&product=374568#N223 then there are drivers W7 32 and 64 bit available for this purpose.

  Everything on the PC concerned with your HP printer uninstall, restart the PC, then download and use the appropriate driver (W7 - 32 or 64 bit depending upon need) and see what happens then.

  Whatever it is, as its apparently supported, you're probably better asking HP if you did not already.

• How to scan using the HPDeskjet 1510 All-in-One-Series

  I Don t know how to scan in a HPDeskjet 1510 All-in-One-Series. Please help me to scan with this printer

  Hi Sotagar,

  The method for analysis is based on the operating system you are using. Here is a page that lists the different instructions based on OS.

  Scan with HP Deskjet 1510 all-in-One

  I hope this helps.

• HP psc 2355 all-in-one: PSC 2355 all-in-one scan, but not print

  The printer was purchased at a garage sale may be a few years back. It scans perfectly fine, but it will not be printed. I tried searching the Web for drivers and uninstalling/reinstalling it, even the installation under another pilot as series 2300. The closest driver that appears is 2350 series. Windows Update crashes when I try to get to find the drivers more.

  Print a test page once, he hasn't done anything since then except to give me errors on the printer LCD. I have only a black cartridge in it because I don't need color, but I doubt that's the issue.

  From the looks of things, this is a common problem... I saw a post where someone has too, but nothing has worked.

  I am running a computer portable 64-bit windows 7, home premium and USB connection.

  Hey @TKStall,

  Thanks for getting back to me with the error messages.

  The value 0 x error messages you see on the screen of your PSC 2355 all-in-one indicate a hardware failure in your printer ink system. Because the errors seem to be intermittent at the moment it is you may chance using your printer for a little longer. However, there is a hardware failure occurring within the printer and for this reason, there is a chance that your printer may stop working at any time.

  Troubleshooting steps for error 0 x can be found here. But, as you can see one troubleshooting step is to perform a power reset on the machine. If the power reset does not clear the error state that a replacement of the entire unit would be necessary.

  Try to install your printer using the driver PSC 2350. However, if the error messages continue to appear on your printer, I would recommend reaching out to the Technical Support queue by phone about the options for replacement of material. Due to the age of your printer, you may have the option to update your PSC device for a newer model at a reduced price.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  It has been a pleasure to work with you. I wish you good luck going forward with this!

• PSC 2355 All In One - used to scan

  I had to uninstall and reinstall my PSC 2355 All In One Printer because the scanner was not working. I downloaded the 'simple' version and the printer is fine, but I cannot scan stall. Should I uninstall again and download the 'full' version' - who would do it or not? I know that I can open Paint and scan from there, but I'd rather work on the printer itself - someone help? Thank you very much in advance.

  With the simple version just the scandriver is installed, so you will need a party 3thrd like a paint program to scan. To have the features you want, install the full software of features indeed.

• Unable to print on hp psc 1350 all-in-one of imac (os 10.6.8) but capable of scanning

  Unable to print on HP psc 1350 all-in-one of iMac (OS 10.6.8) but capable of scanning; also able to print other printers connected to the same computer.  The printer is connected directly via the USB port and I downloaded and installed software for printing on Mac using OS 10.6.  Shows the impression that labour is on hold whatever program originating the print job.  The State of the 'mistake' poster print job, but there is no information about error numbers or other details of the error. The correct printer is selected by default and layout is correct.  The printer has been disconnected, turned off and restarted and the computer has been restarted several times.  Able to print/scan/to 1350 PSC all-in-one of older Mac laptop (OS 10.5.8).

  Additional suggestions are sincerely appreciated.

  If you are using Snow Leopard or Lion and you have the HP software before Snow Leopard (either from a CD not marked as compatible with 10.6 or you recently upgraded to Snow Leopard or Lion and had the software HP on your Mac before you upgrade - even if you made a standard from the old software uninstaller or installed new software on top of it) , you must uninstall the software by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall< this="" is="" the="" scrubber="" option,="" there="" is="" no="" button="" labeled="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now reset the printing system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• I have a hp psc 1350 all-in-one. I would be able to scan and transmit in color?

  Let me be more optimistic. How can I scan and upload a picture in color? Rkght now I get only a black and white photo.

  I know what "Congratulations" means, but I do not understand what the word means when it is added to my ad. In any case, I thought about how to digitize and transmit images in color. It's easy. Now, maybe different printers or operating systems would do it differently, but for my hp psc 1350 all-in-one, my iMac and my Mac OS 10.6.8 you do it like this:

  (1) click on the print icon in the dock. A hp psc 1350 all-in-one window will appear.

  (2) to the top of the window of all-in-one hp psc 1350 on the right side, you will see the word "gender".

  (3) click on the double triangles after 'genre' to open the drop down menu.

  (4) select 'colour' in the menu dropdown.

  (5) click "scan" at the top and right of the window of all-in-one hp psc 1350.

  (6) you can take it from there. I did, and I'm really bad at this kind of tning.