I can't share my Wifi using Intel my WiFi utility

Similar Questions

• Can not get the graphics driver Intel HD to Satellite C50t-B-110

  Hello

  I'm trying to update my driver Intel HD Graphic on my C50t-B-110 Satellite. I can't the driver of the Intel driver update utility because it is a pilot costume, so I might need assistance in case there are the last you're looking for the right driver.

  The Intel driver will install fine, you just have to uninstall the existing driver first in the Panel.

• Can I use Intel Wireless Display - Netgear PTV1000 on Satellite U400-157

  I want to use the NETGEAR PTV 1000 wireless display device. The hammer on the Net says I should be able to use it if I change the operating system to Windows 7. I see that I need http://www.intel.com/support/wireless/wtech/iwd/sb/CS-031059.htm Intel Wireless Display to use.

  The Intel Wireless WifI Link 5100 wireless on the Satellite U400-157 is. Seems that it is not one that is required to run the PTV 1000? So an operating system for Win 7 can not allow me to use the PTV 1000?

  Found a similar thread about the use of the Intel Wireless Display
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=64770

• My wife has an iPhone 5 s and I have an Android Note5.  How can we share calendars?

  My wife has an iPhone 5 s and I have an Android Note5.  How can we share calendars?  Can we use the native Apple calendar or should we use the calendar Gmail app somehow?  I want to be able to view and update calendar and she wants to be able to see and update mine.  Any ideas?

  No, you can't share callender from iPhone to android.

• Can I do the router uses an older Protocol of WIFI (WEP) with Lion?

  A colleague who I am to help got a new router, which wwas pre configured by the provider.

  Lions (Lions of Montain) on MacBook Air can connect to the Internet easily around my iOS 9 mobile (personal "hot spot").

  My 9 immediately connected iOS devices.   Although older OSX (Lion? ML?, I don't know with certainty at this time) does not work.

  They see the net in the most convenient airport and can fill in the PW and the 'antennas' in the menu shows good connection, although Mail and Safari (only available applications) report: no connection to the Internet.

  Perhaps the kind of connection is newer legacy systems can in itself.

  Can I do the router uses an older Protocol of the WIFI (WEP) with Lion on Airport?

  Can I do the router uses an older Protocol of the WIFI (WEP) with Lion on Airport?

  This will not change anything, except less secure your network.  The encryption method does not affect the rest of the internet connections, and you indicate that you are connected to WiFi.

  You can check if you have a valid DNS address

  System-> network-> advanced-> DNS preferences

  You can test your own DNS addresses by clicking on the [+] sign and adding something like

  OpenDNS.org

  208.67.222.222

  208.67.220.220

  Google DNS

  8.8.8.8

  8.8.4.4

  You could try running "Network Diagnostics".

  Finder-> go-> go to folder->/System/Library/CoreServices

  This should open a folder

  Double click on-> Network Diagnostics

  Follow the instructions.

• Satellite L650-11R: I can not disable the WiFi using Fn + F8 module

  Hello!

  I have a rather strange problem: I can not disable the WiFi using Fn + F8 module.

  It happens after reinstalling Windows. I installed Windows 7 Pro SP1 x 64 (MSDNAA). I installed the driver Broadcom WLAN, then Toshiba Value added package and Bluetooth Stack from Toshiba Web site.

  When I press Fn + F8 there is only a Bluetooth icon, I can enable and disable. And there is no WiFi icon.
  Wireless network card is listed in the Device Manager, it works.

  Before you reinstall Windows, when I had used pre-installed Windows 7 HP, it worked correctly: there were three icons, I could turn off/turn on WiFi, BT and the two WiFi + BT by pressing Fn + F8.

  Does anyone have a problem like this?
  Can someone help me?

  Thanks in advance.

  Hmm generally the FN + F8 should switch on / off the Wlan correctly.
  Maybe the WLan driver must be installed again even if the wireless network adapter is already visible in Device Manager.
  Try it

  Welcome & good luck

• I have access to the Internet, but I can't open something that uses WiFi.

  I have Internet connection on my computer, but after each 10:00 P. M, even though my computer says I have an internet connection, I can not open anything that uses WiFi. Y at - it an app that does this or there is a setting that sets deadlines for the WiFi on the computer?

  Gerry,

  Thanks for all your help and effort you put in.

  I discovered it was my wireless router was not working.

  Thank you very much!

• How can I activate my wifi on the use of cmd card?

  How can I activate my wifi on the use of cmd card?

  Hello Siphomangena,

  Thanks for posting your query in Microsoft Community Forum.

  If you want to enable the Wi - Fi adapter, try the following steps. However, it does not activate or disable the driver of network installed on your computer.

  1. Go to Start, click all programs and open the Accessories.
  2. Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, click OK, or alternatively, click Yes.
  3. In the command prompt, type the following command and press ENTER:
     netsh interface set interface name ="Local area connection"enable

     Note: replace the Local network connection with the name of your card, for example, the wireless network connection.

  4. This allows you to Wi - Fi adapter.

  Corollary: Replace 'activate' with 'disable' in the command in step 3 to disable the Wi - Fi adapter.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• I have XP Home and Vista Home premium desktop computers. I can't print using a limited account and I can't share printer

  I have XP Home and Vista Home premium which are interconnected desktop computers. they have only two accounts.

  I am not able to get ashare a printer, or and I can print if I type something from the administrator account on the computer connected directly to the printer, I can't print using the account of this same computer - only on behalf of the administrator.

  I can't print at all using the Vista computer.  Is to show that they are networked - is do not know maybe it's that the XP needs a NETWORK map?

  I have two accounts, one is an administrator on a computer and the other is one Director on the other.  Help, please.

  There is a router.

  Hello

  Follow these methods and check if that helps:

  Method 1:

   

  Make sure discovery network and printer sharing are on by following the steps in the article:

   

  Select the file and printer sharing

  http://Windows.Microsoft.com/en-us/Windows-Vista/enable-file-and-printer-sharing

  Method 2:

  You can also download from this link and check if it help you.

  Troubleshooting File and Printer Sharing in Microsoft Windows XP

  http://www.Microsoft.com/download/en/details.aspx?ID=744

• Satellite P10-304: replacing a WLan card - can I the same WiFi chip?

  Hi all

  got a satellite P10-304 of a companion here.
  He said the free thread never worked on it and hes had it years and someone else has already looked at and changed the TNA wireless card.

  Basically, she acts only as the wireless switch does not work and it remains permanently off the coast, although the drivers install correctly and map also shows ok. Simply disconnected.

  Now, I thought, okay, I'll take a look because I'm pretty good on the old hardware. Has taken apart and this you know, switch has been bent and not up. I handed the place, checked the switch and stop positions with a multimeter to check the switch worked and he was doing his job perfectly.

  Now it still doesn't.
  I guess it is now due to the fact that as I said, the map has been changed since its origin to a processor intel pro jobby.

  My question is, I'm right, do I just need to get the same card that was originally in it. I assumed that when the switch is set correct return, that I solved it.

  Hello

  The WiFi card must be activated bu switching the switch TO the position (the LED must illuminate) and in addition, you should choose the WLan antenna using the FN + F8 key combination.

  Please check this!

  Notes; go to Device Manager-> properties-> Advanced tab Wlan card
  There you can check if the WiFi is enabled as well.

• I can't share the album on flickr or facebook

  Hello:

  I have started to use pictures and still trying to find a way to do some very basic housekeeping!

  First, however, can't you share a photo album. The only option that appears when I chose to share, is iCloud, which I'm not interested in using for the most part.

  I put accounts in Sys Prefs for Flickr and Facebook that appears if I select a photo, but they are not offered in the options for all sharing. I restarted twice. Always unable.

  I can also share if I go to the Photos to find them all laboriously everyone I want to share, but it was the goal of creating the album!

  Is there a way?

  Thanks in advance!

  Tannis

  What version of Photos do you use?

  I can also share if I go to the Photos to find them all laboriously everyone I want to share, but it was the goal of creating the album!

  You can only share photos, not the albums on Flickr and Facebook.

  However, if you create an album, you can select all the photos in the album and share both selected photos.

  In Aperture and iPhoto, you can share albums of photos and keep them in sync with Facebook and Flickr. Now, you can only add photos already existing albums on Flickr and Facebook.

  You can also start from the Facebook page, create an album, then download using the web interface. You can select your photo library in the media section of the file selector Panel.

• How can I share my books with another user?

  How can I share my books with another use?

  Your iBook and anything else that you have downloaded from the iTunes Store, are related (and allowed) to your account - they can be shared or loaned to other users.

• Satellite S70t-b00c use Intel GPU everything at stake

  Hey guys,.

  Yesterday I bought a new toshiba Satellite S70t-b00c and when I play my games sound using intel Integrated GPU

  How can I fix?

  To switch to the external GPU, right click on the desktop
  In Catalyst Control Center Power, click on select Maximum Performance when it is plugged

  Then in global settings of Switchable Graphics also choose maximize Performance

  Then click on the switchable graphics Application settings
  Now, you would be able to add an app (game) that could use this graphics card settings
  Simply tap the exe of the game and add to the list of applications.
  After that, you will see the exe file in the list. Click the graphics settings and set it to high performance.

  But beware: best performance GPU produces more heat, which leads to a higher internal temperature.

• Qosmio F750-Q10 - how to use Intel Wireless Display

  Hi all

  My apologies if this has been posted somewhere but I can't find it if it has.

  I have a Qosmio F750-Q10 laptop and have recently bought a Toshiba LED Smart TV, which includes the Intel Wireless Display.

  I wonder if my laptop is able to use this piece of software that I tried to download the software from the Intel Web site and tried to install one.

  However, when I try to install, I get the error message;
  "Abandoned InstallShield.

  This platform is not compatible with Intel Wireless Display"

  Can someone shed light on this for me please?

  Thank you
  Steve

  Intel is the leading company behind this feature and they have a very nice document describing the necessary components and software to be able to implement the WiDi.

  You can find it here:
  http://www.Intel.com/support/wireless/wtech/IWD/sb/CS-031059.htm.

  To check if your laptop s equipment meets the requirements of the Intel Wireless Display

• EliteBook 2530p. Can not turn on WiFi Windows 10

  EliteBook 2530p, Windows 10 home

  Ive just upgraded the machine above 10 win 10 with the help of this site. Everything works fine except one thing, I can not turn on WiFi.

  The orange LED on the touch screen under the screen and the front edge of the machine are both orange and when I try to use the touch screen to turn it on nothing happens.

  All other keys work fine so I don't think that's the problem. I don't know another way to activate the WiFi on this machine.

  The WiFi card is recognized in Windows 10 Device Manager and I have re-installed the card and made sure the antenna cables are properly connected.

  Anyone had similar problems with WiFi / Win 10 works is not on this machine model?

  Any help or advice appreciated.

  SOLVED

  I'm frustrated, trying to get the WiFi works because it is a machine I was in the process of selling and I had no user file to worry about, I decided to clean install Windows 10 and re - install Windows 7.

  I did this and load all nessasary drivers but no matter what I did the WiFi refused to turn on. I did several searches and HP Wireless Assistant who got the status of 'Wireless LAN' was OFF but the Start button is grayed out so I couldn't activate it.

  While remaining in the wireless Assistant I hit the WiFi button on the touch screen and a message appeared telling me to unplug my Ethernet cable. As soon as it is unplugged the button power on in the Wireless Assistant has become clickable and I was able to turn on the WiFi!

  So it seems that if you connect an Ethernet cable to this model of HP, the WiFi system is disabled and the only way for him help is by unplugging the Ethernet cable.

  I think I'm going to stick with Win 7 because I'm still not sure that the wireless card is supported under Win 10