I can't sign into my windows live messenger on my computer but other people can. I can sign into my windows live messenger on another computer and it works. the error code I get is 8e5e0220. How can I fix?

Similar Questions

• Windows Vista Home Premiun auto restoration and backup; Save the error code: i/o device error (0x8007045D), file backup complete normar will not complete successfully.

  Device error Code: i/o Device (08007045D) error Code... trying to make a backup of normal file that goes all the way and then produces this error code.

  Hey Rodney,
   
  To resolve this issue, follow these steps:
  1. Click Start, type cmd in the start search box, right-click cmd.exe in the list programs and then click Run as administrator.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  2. at a command prompt, type the following command and press ENTER: Chkdsk/r X:
  Note: In this command, x is a placeholder that represents the drive letter of the volume you want to check.
  3. press y when you are prompted to check the drive the next time the system restarts.
  4. close all applications and restart the computer.
  Note: When you restart, Windows checks the drive for errors, and then Windows starts.
  5. after the computer restarts, repeat steps 1 through 4 for the other volume and try the backup operation again.
   
  For more information, see this article: http://support.microsoft.com/kb/952272
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• I can not install 2680317. I get the error code 80070641, not 646. I tried Microsoft fixit and still no installation. Any ideas out there?

  I can't install the update to windows KB2680317 update for Microsoft Works 9.  I get the error code 80070641, not 646.  I tried Microsoft fixit and still no installation.  Any ideas out there?

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Put the computer in a clean boot state, and then try to install the updates and check if it works.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.

  Method 2:

  Try the steps in the Microsoft article and check below if the problem persists.

  The problems with the installation of the updates:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 3:

  Try to download updates from the Microsoft Downloads Web site and check.

  http://www.Microsoft.com/download/en/default.aspx

  And also to try the steps in the following Microsoft article.

  http://support.Microsoft.com/kb/818018/en-us

  Hope the information is useful.

• Hi, how can I start my programs? An old verson of Adobe creative suite 2 premium for universities? I have a new computer and I find the activation code of the can´t. The old computer was rejected. Can you help me?

  Hi, how can I start my programs? An old verson of Adobe creative suite 2 premium for universities? I have a new computer and I find the activation code of the can´t. The old computer was rejected. Can you help me?

  Please check: error: "Activation Server unavailable". CS2, Acrobat 7, pass a hearing 3

• 'ERROR 8024200d' this is the error code I get when I try to run Windows update

  code 8024200 D is the error code I get when I try to run Windows update. My Windows Vista computer is SP2 after you install updates.

  I tried installing several times with no luck and end up with the same error code. I have "Microsoft Security Essenial" installed on the PC.

  Thank you

  Hello
  You can follow below link that can help you to solve your problem:
  Windows Update error 8024200d
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-8024200d
   
  Note: Above the article implies on error 8024200 d.
   

• Windows Vista Home Premium SP2 32-bit not updated, the error code 80070005.

  Windows Vista Home Premium SP2 32-bit not updated, the error code 80070005.  Have tried little about everything without success. AV is Microsoft Security Essentials, Norton has preloaded, ran Norton total clean. Don't know the last updated time to race day, I re-load of updates (right term?) who cleaned the logs.  Have the free version of Malwarebytes, run regularly, nothing comes.

  Fixed, had run as before, but didn't save Subinacl desktop instead of folder mentioned in fix

• get the error code 49 downloading bridge.  How can I fix it

  I get the error code 49 downloading bridge.

  It seems that Adobe CAT is non-existent.  Can anyone help?

  If Windows , go to . C: > Program Files >. Adobe > Adobe Bridge cc.

  launch the bridge CC cc Adobe Bridge folder.

  If Mac , launch Adobe Bridge cc from the Applications folder.

  Once the bridge CC application is launched, exit Creative Cloud Desktop app.

  In CC Bridge menu, click the option " help to ' .

  Then select updates .

• I can't update MS windows, IE & Office files. The error code I get is 80246008. Last update successful prior has been KB2636927 may 18. I use Norton 360.

  I am running Windows XP Pro SP3 32-bit.  The latest updates that do not include KB2685939 and 11 other people.  I received the error code 80246008.  Last update successful prior has been KB2636927 may 18.  I am also running Norton 360 and Advanced System Optimizer (by Systweak).

  Hi John,.

  I suggest you to follow the steps and check if it helps.

  Error message when you search for available updates on the Windows Update Web site or on the Microsoft Update Web site: "0 x 80246008.

  I hope this helps.

• Vista - Windows Update fails and defender gives the error code: 0 x 80080005

  Well, I downloaded Veoh Web Player and DivX player (with a driver package) almost the exact same time, so I don't know who caused the problem. (Guessing Veoh done.) I restored system which usually solves it for me and then uninstalled both programs and even if my computer is not nearly as slow as it was when they were both installed, it's always problems. Windows open frequently stops responding. As I said, the system restore only makes it better for a short time while longer I go without eating, the freezier my computer becomes. I also noticed that for about 2-3 days (after which my computer almost completely freezes and I have to startup repair) most minor cosmetic changes.

  I use Firefox, so the first change I noticed was that left side of the address bar in a small half circle in a regular square. Tiny. Then the scroll bars on all the programs I've used lost their Aero look and returned to normal, old style Windows. Eventually good menus click lose their new look, then all the start menu, and finally Windows Explorer stops working and all the windows, when not in use, become small tabs at the bottom of the screen. After that the computer hangs almost entirely.

  Each time I restart or system restore the first thing I see is a little box that says that a Windows host process has stopped working. Windows Update continually fails and Windows Defender gives the error code 0 x 80080005. What can I do? I looked for answers before coming here to help and what I read it looks like a downloaded driver can interfere with the host process, even if I uninstalled it (supposedly) all. Thank you.

  Applications, (Norton and McAfee) are known to not uninstall (or upgraded) themselves.

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. now to reset Windows Update by...

  How to reset the Windows Update components?
  [Access KB971058 via Internet Explorer only;] Run the difficulty in DEFAULT and AGGRESSIVE mode]
  http://support.Microsoft.com/kb/971058

  5. restart & test.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Installation of Windows Vista Service Pack 2 (KB948465) will fail with the error code 800F081F

  Hello

  I tried to install windows service pack 2 for vista via windows update, but it fails everytime with error code: 800F081F. I tried to run Microsoft FixIt and systsme even update the tool but no luck. even the system tool update crashes while ' installation of hotfix for Windows (KB947821) (update 1 of 1)...» ". No online solution proved to be correct in my case. Help, please.
  Thank you

  Hello

  System update readiness tool will take some time, so I suggest you wait a while until the process is completed.

  You can find newspapers by accessing this folder.

  c:\Windows\logs\cbs\checksur.log

  I would suggest trying the following steps and check.

  Method 1:

  Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  Back up the registry - http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  Methods 1 and 2 require changes in the registry to do. Make sure that you back up the registry before you proceed.

  I would have you look at the article-

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2-

  I would have you look at the article-

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997#appliesTo

  Note: The Chkdsk command will try to fix bad sectors on the hard drive. All the data on these areas could be lost in the process. It is also possible for the computer to enter in a start State no.

  Proceed at your own risk.

  In addition, see the reference article-

  Problems with installing updates

  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-problems-with-installing-updates

  Answer if you need more information on this, and we will be happy to help you.

• Windows Update fails to install updates three KB2686833, KB2699988 and KB2709162, with the error code 8E5E03FB

  I am running Windows Vista and Windows Update fails to install three updates... KB2686833, KB2699988 and KB2709162... the error code is 8E5E03FB which I can't find a solution for anywhere... Please help

  Original title: anyone know where I can find a solution for error code 8E5E03FB

  I looked in the help and the Microsoft Web site in the world.  I tried to startup using MSconfig, activate and deactivate services, I tried the Microsoft Update Catalog.  I started by not being able to install six updates and now got it to three and have grown tired of trying to figure it out by myself.

  If you have tried everything, including a repair install as stated in this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/8e5e03fb-one-of-five-error-codes/71180dc5-75EA-49D8-b419-60454e79c83f

  You've done everything mentioned in this article?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Windows-update-fails-to-install-with-error-code/c811f435-0e3b-4609-ae39-b441bf4072a9

• try to install windows in a new driver and gave me the error code 0 x 80070017

  Original title: install windows in a new driver

  try to install windows in a new driver and gave me an error code 0 x 80070017 Windows vista the hd is brand new, what I am doing wrong

  Hello

  Here's how to clean install vista

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

• Update Vista Update Readiness Tool system for Windows Vista (KB947821) [September 2009] - Installation failed due to the error Code 09370001 - how can I solve this problem?

  I have the same error Code 09370001 which appears whenever my PC is trying to install the update: System Readiness Tool for Windows Vista KB947821... I have 7 failures of my PC, try to install this update.

  My system is:
  Windows Vista Premium Hm
  Intel (r) Core (TM) 2 Duo processor T7250 @ 2.00 GHz
  3.00 GB RAM
  Mobile Intel (r) 965 Express Chipset Family

  Can someone guide me how I can get this update to install?

  Thank you so much in advance.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I can't install Sony Vegas 10 my computer tells me that the error code 1601.

  I tried to install Sony Vegas 10 recently, but an error saying Windows error: 1601. I think it has something to do with the installer.

  Currently, I run a 32 bit with Windows Vista OS.
  I looked at a few others who say update my Installer, but I can't not all updates for Vista 64-bit or say that my software is not correct to update.
  Any help?
  EDIT: I recently discovered that I can't find my Windows Installer, which means it might be damaged or even uninstalled, if that's the case then how can I re - install? I tried to fix that did not work.
  -Sam

  You can try the following to help in problems of Windows Installer:

  Method 1: check if the Windows Installer service is set to Disable

  1. Click Start, type services.msc in the start search box and press on enter.
  2. In the list of Services (Local) , right-click Windows Installer, and then click Properties.
  3. If the drop-down list Startup type is set to the value off, select the Manual option in the drop-down list Startup type .
  4. Click Start under the service status section, and then click OK.

  Method 2: Reregister windows install

  1. Click Start, open the Run dialog box (windows key + R)
  2. Type msiexec.exe /unreg and then click ok.
  3. If you receive a confirmation message, click OK again.
  4. Click Start, open the Run dialog box (windows key + R)
  5. Type msiexec/regserver , and then click on ok.
  6. If you receive a confirmation message, click OK again.
  7. Try to install the application and see if the problem persists.
  8. If you still have the error then try the next method.

  Method 3

  Download the latest version of windows installed and install it on your computer.

  http://support.Microsoft.com/kb/942288

• Updates KB2533523 and KB2468871 cannot install and I got the error code 643 on my windows vista computer.

  Help! How can I get those blasted things to install?

  Hello

  Follow the step and check if that helps.

  Method 1: you receive error 0 x 80070643, error code 0 x 643 or updates may be offered again when you try to install .NET Framework updates when you use Windows Update or Microsoft Updates

  http://support.Microsoft.com/kb/976982

  Method 2:When, that you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive a Windows Update '0 x 643' error code or error code Windows install "1603".

  http://support.Microsoft.com/kb/923100

  Method 3: you receive error code: 0 x 80070646, error code: 646 or error code: 1606 when using Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/2258121

  Method 4:Try download and install the update

  http://www.Microsoft.com/download/en/default.aspx