I can't start firefox even in safe mode.
I can't start firefox. It is said that it can not load the profile. The profile files are there, I believer.
I can't start firefox even in safe mode, by holding down the SHIFT key.
I stopped firefox when he tried to do a refresh (it took a long time).
So there is a record of old data that I copied the default profile folder.
.. There's a data folder I copied the default profile folder.
If you want to use the content of the profile that you copied return, make sure that they don't are not 'nested' a layer down in the profile folder.
I have a HP desktop computer comes with Windows Vista installed on it. I have no recovery discs, I have a hard disk recovery partition. I can't start in safe mode. I ran startup repair, tried restore points and even tried a complete pc restore, nothing works. I am still unable to start Windows, even in safe mode. Here are my coordinates of startup repair problem. Can you please point me in the right direction?
Problem event name: Startup Repair V1
Signature of the problem 01: Auto failover
Signature of the problem 02: 6.0.6000.163188.8.131.5200.16386
03:6 problem signature
Signature of the 04:655370 problem
Signature of the problem 05: installation failed
Signature of the 06 problem: no boot failure
Signature of the problem 07:0
Signature of the 08:0 problem
Signature of the 09 problem: unknown
Signature of the 10:1168 problem
OS version: 6.0.600.2.0.0.256.1
Locale ID: 1033
If the HP recovery process does not work, it seems to be a hardware problem.
And now that you mention have a blue screen.
If it was a software problem, the process of HP recovery to reinstall the operating system should fix (take it back in new condition).
And this new condition would exclude any incorrect hardware drivers may have installed the original problem.
Have you tried HP support?
Or assistance HP Forums:
See you soon.
HP recovery process, you get the possibility of a destructive or non-destructive restore. If you use non-destructive recovery option, often have the same problems continue.
The problem continues when you use destructive recovery too.
IMac my wife, 2012, 27″, El Capitan, will not start, not even in safe mode. The problem started during the installation of Mac Office 365 (2016), although the installation on my machine worked fine.
The following two photos are sure Mac verbose mode. (Photos are from consecutive boots, that the camera did not focus, but the behavior of the Mac is constant in boots attempts.)
Disc utilities reported an error. Although fsck - fy is not.
Please, kind of people from the communities of Apple support, what should I try then?
Have you tried to boot into recovery mode. Combinations of keys start for Mac - Apple Support
Select disk utility, then check the disc. Resolve startup issues and perform maintenance on disk with disk utility and fsck - Apple Support
How much free disk space hard do you?
What is the error Disk Utility has.
I can only start my computer in safe mode and my security settings are turned off, what do I do?
I tried to download an anti virus scan, but it does not work?
1. what happens when you start your computer in normal mode?
2. what version of Windows is installed on your computer?
3 are you aware of any changes made to the computer, before the show?
Assuming you have Windows Vista or Windows 7 is installed on the computer,
Perform a clean boot and check for the issue.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
Note: once you are done with the boot, follow step 7 of article to put your computer to normal startup.
Check if your computer is configured to start only in safe mode.
a. Click Start, type msconfig and press ENTER.
b. click on the Startup tab.
c. under Start Options, uncheck safe startup.
d. click on apply and OK.
I hope this helps.
Since this morning I am trying to start my Windows XP, but I am not able to do. I had two different BSOD BAD_POOL_CALLER, STOP: 0x000000C2 and STOP: 0 x 00000024. The computer does not start even in "safe" mode What can I do?
- What were the changes made before the issue occur?
I suggest that you try to start the Recovery Console from the Windows XP CD Windows and run CHKDSK.
Here is the link:
Warning of Chkdsk.
Important: If all available hard disk data can be lost when running chkdsk, as the chkdsk attempts to repair the affected area.
Can any one help I have a windows XP when I boot my computer I want to run in safe mode, to start, it ran windows normally or the safe mode options, but I can't move the selecter until safe mode, I think that the keyboard does not work on startup so I can't choose Safe mode no matter what knowledge is there another way to start in safe mode?
(Scroll down to the "Alternative method to using the F8 key"... "But you should understand why you don't have a keyboard at that time).
Original title: UPDATES DOWNLOADED PROBLEMS to START NORMAL, MUST LOAD IN SAFE MODE - LOST AFTER 30-40 SECONDS VIDEO
After the download and installation of updates on my desktop Gateway (FX7020) the computer freezes on me and was forced to shut down hard. After a few attempts to start the computer, I was able to get into safe mode. After some time in the exploration of the event viewer I tried out and re-start of normal BONE. I was unable to make it through the boot sequence and had to shut down hard again. I waited a while and it made back in safe mode, but this time after 25-40 sec. I lost the video, the mouse, the keyboard. Everything was running. I've read a few articles and I hope that I don't have a F... THE OS.
Thanks any help will be graciously appreciated... RA
You can try restoring the system to safe mode and check:
Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
You can consult the links for:
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restoreSystem Restore: frequently asked questions
If the problem persists, you can refer startup Repair in Windows Vista, which is a recovery tool that can fix certain problems. You can check the link:
Windows 7 Professional
Windows Security Essentials
I clicked on the Firefox icon. The cursor has changed from an arrow to a spinning wheel. Nothing happened. It remained like that for 20 minutes until what I went into the Task Manager and stop the program.
I am forced to use Internet Explorer and it's awful. Please help me.
Try disabling hardware acceleration in Firefox.
- Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
You can use one of them to start Firefox in safe mode:
- On Windows, hold down the SHIFT key while starting Firefox with a double click on the shortcut to the desktop Firefox
- On Mac, hold the Options key when starting Firefox
- Help > restart with disabled modules
IE has never had a problem, but in FF, I still have "the connection was reset. The connection to the server was reset while the page is loading. »
This also includes doing 127.0.0.1
The fact that I can not get in Mode safe, but can get when private browsing is strange, I think. That includes private browsing only Safe Mode, to see if this is the problem?
PB mode does not use the disk cache and does not use the current set of cookies.
Clear the cache and cookies from sites that cause problems.
"Clear the Cache":
- Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.
'Delete Cookies' sites causing problems:
- Tools > Options > privacy > Cookies: "show the Cookies".
When I turned on my laptop the windows logo and everything is in place. But then comes the black screen and ask the options to start windows normally, start in safe mode, ect. I chose to start normally, then a blue screen appears which says that the computer has shut down to prevent damage. He said that I had to disable all anitivirus and other things that I don't have to read. I tried every other selection as start in safe mode, start in safe mode with command prompt, in the other options, I get the same blue screen. I really need to get this problem fixed. I have no CD of installition XP, I have no CD of restoration, I have nothing to work with, so I just need to know a way around it.
There is no magical way around that without any installation disc. Most laptops come with a picture of factory restore on a special partition on the hard drive. The factory restore process is normally called by pressing a key of function (such as F11) to start the computer. There will be a message as to what function key press the screen when you start your computer. You can also consult the manual of your computer or the computer mftr.'s site, or contact technical support to learn how to restore your computer if you plant from each computer mftr. He does it differently - sometimes even between models.
These machines also generally have a utility to create physical recovery disks in case the hard drive needs to be replaced or the factory restore image is somewhat damaged. If you have not created the recovery image recovery physical and damaged disks, contact technical support of computer mftr. to order a set of recovery disks. It is normally very expensive, around $20-25.
Before you try to restore the computer, you must determine if the material is good. You can test yourself:
A good troubleshooting step is to start with a Linux Live CD. I like Knoppix, but there are others. This has two advantages: 1) if the system works, you can back up all the data that missed your last backup; and (2) with the machine running Linux allows to determine whether the problems are caused by software or hardware. If the machine is unbearably slow and/or Linux cannot run correctly, you know that the hardware is at fault. If the machine behaves perfectly under Linux, you know that the software (Windows) is at fault.
If the equipment is faulty, if you replace it or not depends of which component is bad and the age of the machine.
If the material is good (maybe Windows has been severely infected with a virus/malware and that's why he no longer starts for example), then perform a restore if you plant using any method has been provided by the computer laptop mftr.
If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad).
MS - MVP - Elephant Boy computers - don't panic!
After the updates of this week, the system will not load anything.
Thanks for asking the question in the Microsoft Community forum.
From your description, I understand that after Windows Update, you can not load Windows.
To better understand the question, please answer the following questions:
1. What is the version of the Windows operating system that is installed on your computer?
2. what happens when you try to load the system? You receive an error message?
3. what application or anti-virus security suite is installed on your computer?
4. you remember after installation of update, you are facing this problem?
Remove any external device connected to the computer without keyboard and mouse and then perform the methods.
If you are using Windows 7 and Windows Vista, follow the mentioned methods:
If the computer does not start in safe mode, perform the last known good Configuration.
Note: Link above also applies to Windows Vista.
Question remains always use same method 2.
Try to perform the Startup Repair and check.
If you are using Windows XP, follow the mentioned methods:
Perform the last known good configuration.
How to fix a computer that does not start
Hope the above information is useful, if you have any question back to us, we are happy to help you.
I have a XP computer. During use, the power supply cord unplugged and computer is dead. When I tried to restart it, it will go to the blue screen with an error, go to the screen that asks if I want to start in safe mode. It does not start in normal mode, but it does get my wallpaper and stay there. Sometimes Windows XP screen and stay there. It really starts to make a lot of noise when one of these things happens. Don't know what to do. I have a XP OS disk Dell provided with the computer. Any ideas?
Repair the Windows XP installation - you should have all your files intact.
A repair install will replace the system files with the files on the XP CD used to the repair facility. It will leave your applications and settings intact, but Windows updates will have to be reapplied.
I had the virus 'file system' I ran most of MS who removed it... then the screen turned gray and all the icons and files have disappeared... I can't use restore even in safe mode
I had the virus 'file system' and ran the Microsoft Essentials who kidnapped... Then the screen turned grat and all my tyop desktop icons disappeared and my files... I tried to use the restore but it wouldn't return back or in SafeMode... also, I get a notice that the Task Manager is disabled? How can I turn back?
Hi David McGeady.
· You are able to open in safe mode Task Manager?
Follow these methods.
Method 1: Scan the file system (CFS) auditor to repair corrupted files.
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
Method 2: It seems that the virus is still there. Performs a search using the Microsoft safety scanner.
Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.
Method 3: Create a new user account.
How to create and configure user accounts in Windows XP
If the problem is resolved in a new user account, and then follow the article on how to fix a corrupted user account.
How to copy data from a corrupted to a new profile in Windows XP user profile
When I try to go to eyetem restore in safe mode, it will not go. I think I get
Registration errors can help with this problem?
It is somewhat similar to the following Technet problem:
"SP3 hangs at agpCPQ.sys during startup"
who offers this article as a solution:
"Problems when Windows XP tries to load the Agp440.sys service.
< > >http://support.Microsoft.com/kb/324764 >
That may help your problem.
Need to safe mode to correct the profile Service has not logon. The profile is the only Director in place.
Perform the steps mentioned below and check if it works.
a: Type msconfig in the start search box and click on enter.
b: Now, click on the Startup tab.
c: Now place a tick on the option start.
d: Now click apply , then ok.
Note: To return to normal startup uncheck the startup option.
Hope this information helps.
Just reply to us if you have any questions.
Maybe you are looking for
Version 38.0.1 does not see the previously saved passwords, and urged it to re - enter and save the password. After revert you to the version saved 31.7.0 pass back too. We have more than hundreds of copies of the program and all cached passwords, us
Hi all I bought before Toshiba Satellite L40 - 18W notebook 4 months ago, it was working fine until yesterday.but when I turned on my Lap Top today is not shwoing something in the screen.only the power button and battaryLED is on, I have tried troubl
I understand that there is a version "CELINE" of the Z570, but have tried, without success, to get a full spec TEC. That bit of info, I found, it SEEMS as if it is virually identical to the M555VUK, just with a RAM expansion, but is not sure. Can som
I have Acer V3 - 571G, windows 7 drivers are old, but ok, all work. I buy today and intalled Win Pro 8.1, downloaded the latest drivers Acer, but the Dolby Home Theater do not work... Who are the people who have this problem, but no one don't request
Hi, when I try to read a file WMV screen is black but the music isn't yet. I have to move the applicant but it keeps freezing. I tried to reduce the hardware acceleration on the graphics card, but when I get the forest where yo click on change the se