I can't start my computer after installing updates to manualling

Similar Questions

• Several errors in Windows XP computer after installing updates.

  Original title: weird errors after windows update.

  Installed windows to update this afternoon, 13/11/2011. Get weird errors since then. Firefox gets all messed up, windows tabs lose their text, then the PC crashes.

  Can not start Internet Explorer. Get the error message "Application failed to initialize properly (0c 0000142).  When I insert a CD I get DLL errors and indicating that the file is not valid windows image.

  Tried running AVIRA and received the error 'avcenter.exe failed to initialize properly (0c 0000044).

  Tried to run the SYSTEM RESTORE and received valid error "rstrui.exe - Bad Image DLL C:Windows\system32\SAMLIB.dll is not a windows image.

  Tried running the RECOVERY of the PC and received the error 'START. EXE - Application error. The application failed to initialize properly (0c000012d).

  I had to reboot my PC at least six times since this afternoon. I reboot normally once per week!

  How to get back on this last update?

  Hello Ralphlorio,

  This thread has been created in the Windows Update forum; Microsoft moderation team has moved this thread to the system repair and recovery Forum.

• Windows update - Windows Update is not restore my windows/desktop computer after installing updates

  When running Windows Update is not reproduce my office and rather trashes everything.  Ysterday I left to work with over a dozen research Internet Explorer open and this morning, I get to a Windows auto update cycle, which wrecked all.  Well Yes, they are lost and of course, I can spend an hour or more to find once again but my boss is breathing down my neck, as if it was my fault.  Microsoft how inconsiderate!

  Of course, I have a solution, TURN OFF Microsoft Update but is this really what Microsoft wants?

  Please people think.

  Hi jbeech,

  No, I don't work for Microsoft and I am not associated with them in any way (other than to receive awards and certificates I earned on my own).  I'm a volunteer civilian gift free time to help other people.

  I meant nothing personal, per my comments of workflow.  I was just trying to do my best to help you avoid this problem in the future and apologize if you took it the wrong way.  I agree with you that he must restore it things automatically (as it does when you use the hibernation), but maybe that can be done (at least not always) because updates may affect items that are open and to update these programs must be closed (which makes saving them more difficult because if they look different after the update) It may not work if we try to restore them unless they can find a way to save ONLY the information and it is a much more difficult task).  This problem does not occur with an accident or an unexpected shutdown (and a complete restoration in cases does not always work as well and completely that we hope - at least I had problems back exactly where I was with all that every time).

  While you can choose to turn off automatic updates, you don't want to not go for very long without updating your system, so checking periodically (although if you want to do on a daily basis - I would try at least every Wednesday at least since most updates are released every Tuesday) is important in all cases.  The option I suggested (i.e. automatic downloads but no facilities) would at least them already downloaded (you would not need to check - that they would be there) it would take much less time to choose and install if you show if off completely - and when you decide to install, you will find it takes MUCH more time because you need to download and install (unless they are already downloaded).  But it is entirely up to you.

  Good luck and best wishes!

• How can I restore my computer after installing VS2010

  I am running VISTA SP2.  I was running Visual Web Developer 2008 Express successfully for over a year when I started to have a problem of sqlserver, I couldn't fix.  Could not get help on the forum and MS of course does not provide support for a free product.  First of all, I wanted to try a new product on a trial basis, namely Visual Studio 2010.  My first trip was a disaster, but in fairness to MS, it's probably because I was installing a version appropriate for my VISTA Home Premium.  I chose the 'Professional' version, which has its own version and installed smoothly in comparison to the previous installation (with only a few items, do not install).  Bottom line after a few attempts to restore me to my home State, had to get a popup error saying effectively

  CompilerService.EXE service failed try to debug the process, the question I want to ignore or to debug.  No matter how I responded that he kept trying on even after I closed Visual Studio.  Tried to post on the forum with no response, and once again there is no Microsoft support because it is a trial.  I do not understand how I could ever buy a product I can not install even with success as a trial.  Anyway after that 10 days to install, uninstall, try this and try that, I decided to uninstall VS2010 before trying anything else.  I removed VS 2010 and what sounds like one of his tools, the descendants or siblings.  And here I always get an error popping at frequent intervals, saying: see below.  VS has been deleted, I find not just-in-time, and I'm tired.  If anyone out there can suggest something that might work?

  An unhandled exception ('System.InvalidOperationException') occurred in CompilerService.exe [7328] just-in-time debugging this exception failed with the following error: no installed debugger has Just-In-Time debugging active.  In visual Studio, Just-In-Time debugging can be activated from...

  I thought that this register may be the cause of this persistent popup errors, so I thought I would use a FIXIT MS has made available, but the FIXIT tool fails as I mentioned before.  If someone reads this, I can be informed that I'm posting this question on this forum, so please tell me where to post.

  Hi eps123,

  The question you have posted is related to Visual studio and would be better suited in the Visual Studio Forums.

  Please visit the link below to find a community that will support what ask you:

  http://social.msdn.Microsoft.com/forums/en-us/vssetup/threads

• Can not start on Vista after installing Windows 7 Beta previously, error with vdrvroot.sys

  Windows 7 Beta is installed on the same drive as Vista boot Vista.Icant

  How to make a copy of the Windows\system32\DRIVERS\vdrvroot.sys file? Cannot start without him?

  Hello

  Here's the information to do a vista repair disk start

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• Problem starting wondows Vista after installing updates error code 0 * 80070002.

  I have Vostro1400 from Dell with Windows Vista. After you install the updates recently, the screen is empty. It doesn't show anything except cursor (arrow). Diagnostic equipment doesn't show any problem. Windows does not start in SafeMode also. If I tried to restore from previous restore point then it will display the error code 0 * 80070002.

  What should I do?

  Hello

  You can check this link:

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services

  http://support.Microsoft.com/kb/910336

• I have not re start the computer after the update.__What of windows that I stop front of the computer?

  My XP does not work after update on February 10, 2010.
  So my vista never stopped for the day.

  I have uninstall all update February 10 on programs and features .
  KB971468, kb974145, kb978251 kb975560,
  KB977165, kb905866 kb978262 kb890830
  http://www.vista4beginners.com/how-to-uninstall-Windows-Vista-updates

  Checked virus AVG and Adaware.

  Is it way before reboot memory diagnostic?

  What should I do before closing this computer?

  I also made down them before the stop.

  Restore Windows Vista to a previous state
  http://www.bleepingcomputer.com/tutorials/tutorial143.html#restore

  Check The Windows Vista memory diagnostic tool
  http://www.bleepingcomputer.com/tutorials/tutorial146.html

  Replace configure Microsoft Update automatic update not .
  http://www.Microsoft.com/NZ/protect/computer/updates/MU.mspx

  I'm glad that my Vista is not working properly.

• I can only start my computer in safe mode, what can I do?

  Hello

  I can only start my computer in safe mode and my security settings are turned off, what do I do?

  I tried to download an anti virus scan, but it does not work?

  Hello

  1. what happens when you start your computer in normal mode?

  2. what version of Windows is installed on your computer?

  3 are you aware of any changes made to the computer, before the show?

  Assuming you have Windows Vista or Windows 7 is installed on the computer,

  Method 1:

  Perform a clean boot and check for the issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 7 of article to put your computer to normal startup.

  Method 2:

  Check if your computer is configured to start only in safe mode.

  a. Click Start, type msconfig and press ENTER.

  b. click on the Startup tab.

  c. under Start Options, uncheck safe startup.

  d. click on apply and OK.

  I hope this helps.

• Whenever I start my computer after the office's I get a windows firewall disabled alert

  Whenever I start my computer after the office is responsible, I get a warning from windows firewall disabled. The latter for more than 60 seconds. After that, my firewall is on.
  How to solve this delay?

  Hello

  What is firewall WIN XP or any other third-party firewall?

  If it is integrated, you can reset the firewall in factory default state. Run from the command prompts this command:

  NETSH FIREWALL RESET

  How to run the command prompt:

  Click on Start - run - write CMD , and then click OK

  LC

• Does restart/reboot the computer after installing or uninstalling a program?

  Original title: does restart/reboot the computer after installing or uninstalling a program? Which option is it on Vista? Hit reboot? Or off, wait and then start up?

  I was told that if you add or remove a prgram, after it installs you need to 'reboot '.

  Is this true?

  Does this mean that, after the program is installed, you must reach the restart button? Or press 'stop' and then again wait a minute and then be able to save the PC?

  Hello

  Often an installation or uninstallation of will need to reboot to complete and it never hurts except for the
  time it takes.

  A reboot is usually sufficient.

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Can not start my computer hp envy and notification, I get the instruction at 0x6dcf61a0 referenced memory at 0xe19fa418. The memory could not be read

  Original title: the pc startup problem

  I can't start my computer hp envy and the notification I receive

  Theinstruction at 0x6dcf61a0 referenced memory at 0xe19fa418. The memory could not be read

  After I ok this threat my laptop screen will begin to Flash and no action more than I can do except power off.

  Hello

  Thanks for all, but am confused after a lot of links sent u and also the main problem is that I can't connect to my laptop that I told u im unable to take any action.

  The first thing that I advised you to do did not connect.

  I suggest you read the advice of HP

  Run HP diagnostics:

  http://WWW8.HP.com/us/en/campaigns/hpsupportassistant/PC-DIAGS.html?JumpID=va_r602_us/en/any/PPS/pl_ot_ob_ds_pd/HP_PC_Hardware_Diagnostics_cc/DT

• machine is trying to perform a PXE boot after installing updates-"operating system not found error" when PXE boot

  Original title : Aucuns OS after installing updates save broken disk how to reinstall windows vista

  I installed the microsoft updates on my Vista laptop and now the system does not start. Error message is:

  Check the connection of the cable! PXE - MOF:
  exit Intel PXE ROM.

  Operating system not found
  Backup of disks were damaged
  starts from disc downloaded ubuntu, so no problem with a hard drive.
  Cannot access then unable to return to the last good configuration safe mode?
  where can I download vista to reinstall?

  Hello

  Contact your computer manufacturer and ask them to send a set of recovery disks Vista.

  They should do this for a small fee.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Read the responses in these links on the false boot order and network devices.

  http://www.techsupportforum.com/forums/F16/PXE-MOF-exiting-Intel-PXE-ROM-41235.html

  http://www.computerhope.com/issues/ch000706.htm

  See you soon.

• Cannot start the PC after MS Updates

  Later installed MS Updates Friday, restarted PC and it appears with the following message to any attempt to boot the PC:

  Reboot and select proper boot device or insert boot media in selected boot device and press a key.

  It is a RAID system, and this is not the first time that MS Updates were killed. Previously, I've been able to startup repair and operate. This time, he fails.

  During the phase of computer repair, after loading the driver RAID, the repair process States: finds any problems with options to start your computer. Want to ask repair and restart your computer. (I had a glance on the details and he found the installation of Windows 7 Pro X 64) Select Yes, and then immediately, I received the following:

  Failed to save startup options.

  Any thoughts?

  See you soon

  G

  Windows Update the drivers of your motherboard can be one of the possible reasons why you experience a problem with your computer after installing/running Windows Update. Update chipset drivers may result in conflicts with an outdated BIOS. The integrated RAID controller depends on the version of the BIOS installed in your motherboard.

  With this, we suggest disable you the driver in your Windows Update.

  Follow the steps below on how to disable the update of the driver:

  1. Press on and hold Windows key + R and type "sysdm.cpl" then press the enter key.
  2. Click the hardware tab.
  3. Click Device Installation settings.
  4. Select "No, let me choose what to do" and "never install driver software from Windows Update".
  5. Click on save changes.

  You will receive still all the other Windows Update as usual. If a piece of hardware should be updated in the future, you will need to go to the hardware manufacturer's website to download and install the latest version of the driver.

  Let us know how it goes.

• Icons on the desktop are covered by some kind of a generic icon after installing updates

  Original title: updated ruined my office!

  Once the updates have been downloaded and installed to my computer Gateway DX4840-03F (Windows 7 Home Premium x 64) icons on my desktop are now covered by some sort of a generic icon applied on top of the icon who was there.  If I take the icons up to large size I can still see the edges of the original under the generic icon icon.  I'm hesitant to do a restore before the undates were applied.  I guess that when the updates have been applied, I would have the same problem.  This is the first time that I've never used this forum thing, but it seems that this isn't the hottest place of answers...

  Hi skipplummer,

  You can check in the history of Windows update and the updates recently installed.

  Step 1:

  Check the update history to see what updates have been installed. See the link for the same mentioned below.

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  Step 2:

  Given that the problem occurred after installing Windows updates, you can try a system restore and then try to install the updates one manually and check.

  You can try a system restore to a point before installing updates.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  After restoring the system, try to download and install updates one manually from the Microsoft Download Center:

  http://www.Microsoft.com/downloads/en/default.aspx

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• R6034 error after installing update KB890830, KB2419640, and KB2478935 for Windows Vista

  R6034 error after installing update KB890830, KB2419640, and KB2478935 for Windows Vista
  This message is pop:
  Microsoft Visual C++ Runtime library
  Runtime error!
  Program c:\windows\helppane.exe
  R6034
  A request made an attempt to load the wrong C runtime library
  Please contact the support team of the application for more details
  This message appears as soon as the machine restarts
  Happens if I try to run Skype
  There is no problems until the updates have been installed
  This problem is urgent that this computer is used for a company
  Thank you
  David Schlachter

  Hello

  In addition to the suggestion of J W Stuart MVP I ask you to re - install the Microsoft Visual C++ 2008.

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86) for 32-bit editions of Windows
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a5c84275-3b97-4ab7-A40D-3802b2af5fc2&displaylang=en

  Microsoft Visual C++ 2008 Redistributable Package (x 64) for Windows 63 bit editions
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd2a6171-e2d6-4230-B809-9a8d7548c1b6&displaylang=en

  Then uninstall and reinstall the software Skype and check.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.