I can't start my windows

Similar Questions

• I can't start my windows XP

  I can't start my windows XP and it's driving crazy me.
  I tried to start in safe mode, but an error message: "Sorry for the inconvenience..." "appears with a list of the modes of starting; safe, safe with command prompt, safe with networking, last known... "which loads the windows startup page, then continues the whole pathetic saga.

  The last thing I did was to turn off the power by using the reset button
  I know it's stupid, but it's a rush of blood to the head.

  My end and strap joined to the top. Help!

  Seems you have tangled up your OS!

  I think your last resort is on the Microsoft CD or recovery CD!

  Most often only the new OS installation could help.

• I can't start my window Live Messenger

  I can't start my Windows Live Messenger

  You will ONLY find support for Windows Live Messenger in these forums: http://windowslivehelp.com/forums.aspx?productid=2

  PS: your chukkers spiel broken two

• Windows can't start because\windows\system32\config\system is missing

  original title; Windows cannot start because\windows\system32\config\system

  I did a system restore, and when he went to restart blue screen came to say windows didn't start because he would cause damage. Then I went to Advanced menu and it does not start even with safe mode. but it says that \windows\system32\config\system\ is missing... Help, please

  Hi jerijenks,

  · What is the number and the model of the computer?

  · The operating system comes preinstalled on the computer?

  · What is the service pack installed?

  · Why were you running system restore?

  See: how to recover from a corrupted registry that prevents Windows XP startup: http://support.microsoft.com/kb/307545

  With regard to:

  Samhrutha G S - Microsoft technical support.

• Can not start after Windows update

  Hello

  My laptop has done a windows update, but crashed to halfway through, now when it starts and after that I entered my password windows 7 it crashes just, finally it loads my desktop but it took 3 hours to fully charge it and my icons but whenever I clicked on an icon It took about 15 minutes to open and froze the laptop at the same time

  I can not load in safe mode and when I finally managed to restore option it says no restore points are available (which is strange, I created one weekend)

  I also tried to boot from the disc of windows 7 and using all the food options available without result

  any help would be appreciated!  : o).

  sruk79,
  I suggest to start with your support of Windows 7 for System Recovery Options and select the command line option.  Then run the System File Checker and see if it is able to correct the problems.  Then after return with results and information that carry PA asked.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can not start the Windows Firewall service in Windows XP SP3

  I discovered this problem when I installed a new Brother MFC-7860 DW in my network. Although the computer can 'see' the machine, I can't print to it. The error coming from the troubleshooter has informed me that the firewall might be the problem. Now I find that I couldn't open the firewall. I tried the solutions in previous discussions. It seems that Windows Firewall is not yet installed on my machine even if the icons are in the control panel. When I tried MS Fixit for the firewall, it gave me an error and sent me to a web page that does not seem to address the situation. Help, please.

  Now I find that I couldn't open the firewall. I tried the solutions in previous discussions. It seems that Windows Firewall is not yet installed on my machine even if the icons are in the control panel. When I tried MS Fixit for the firewall, it gave me an error and sent me to a web page that does not seem to address the situation. Help, please.

  (1) you have a third-party security software installed?
  This could be due to that... What are the analyses of different viruses that you already have... It may be a product of firewall or security of third parties that interfere the windows firewall, disable one by one your security scanners and try for windows firewall

  (2)if you do not have these installed firewall products, this could be due to malicious software or some other problem...

  If you have an antivirus up to date solution its definitions and do a full scan of the system...

  If you do not have an antivirus solution, or one does not work, use one of the recommended tools (use only one at a time)

  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  And/or
  http://www.Malwarebytes.org/products/malwarebytes_pro/
  And/or
  http://www.simplysup.com/tremover/download.html (shareware)
  And/or
  http://www.McAfee.com/us/downloads/free-tools/Stinger.aspx
  And/or
  http://www.Kaspersky.com/free-virus-removal-tool

  If this also isn't that the problem may be that your firewall service is damaged...
  
  (3) open a command prompt run as administrator and type sfc/scannow

  (4) try to fix the firewall service
  Run the tool repair services by ESET
  http://KB.ESET.com/library/ESET/KB%20Team%20Only/Malware/ServicesRepair.exe

  
  And/or
  Download and add this firewall Windows registry entry - download.bleepingcomputer.com/win-services/7/MpsSvc.reg
  (If you find difficulties to add to the registry to refer this http://www.windowstechinfo.com/2013/07/solved-cannot-import-to-registry-not.html)

  And/or
  Open a command prompt using run as administrator
  and copy - paste these
  Rundll32 setupapi, InstallHinfSection Ndi-Steelhead 132 %windir%\inf\netrass.inf
  and press enter

  And/or
  Download this file and added to the registry by double clicking on it
  https://www.dropbox.com/s/ozezmcs3nktc2s0/windowsxp_firewall_fix.reg
  (5)guest orders (run as administrator), type Netsh firewall reset , and press "enter."

• Windows Vista. How can I start/turn windows Defender

  You want to disable unwanted startup programs.  Have rebooted twice by computer.  Get "service stopped... problem caused the service to stop program.  To start the service, restart the computer... »

  You want to disable unwanted startup programs.  Have rebooted twice by computer.  Get "service stopped... problem caused the service to stop program.  To start the service, restart the computer... »

  1. There is another way to access the startup programs...

  Start > Search box, type msconfig > Enter > start up tab > here is the list of startup programs.
  To disable... Uncheck the box in front.
  Be careful, make sure you know that the program that you want to deactivate does not adversely affect your computer.

  2. Windows defender.
  If you have the following installed anti-virus prgrams, noraml that Windows defender is stopped.
  This is because they have their own defenfer. 2 defenders running on the same computer will create conflicts and redundabt.
  The list of the AVs...
  Microsoft Security Essentials
  AVG
  Norton
  McAfee

  If you are not one of these AVs installed, try this to restart Windows Defender.

  Start button > in the search box, typeServices > press the Enter key > scroll to find Windows Defender, click on it >...
  topic status , it must be said... Has begun
  under Startup Type, it must be said... Automatic
  If it does not say that, right click on Windows Defender > click Properties >
  in Startup Type, click on the pointer to the right and select automatic
  to the service status, click Start
  Click OK when finished.

• Help, please! I can't start my windows firewall!

  When I click on the windows firewall icon in Control Panel, it says 'due to an identified problem, windows cannot display Windows Firewall settings,' WHY?

  Hello

  According to this page, that this happens because of the missing or damaged SharedAccess reg key, which represents the Windows Firewall Service.

  http://WindowsXP.MVPs.org/SharedAccess.htm

  Please follow the instructions on the recommended Internet site. Perhaps it will help you solve the problem.
  Thanks for posting if you re successful.

• can not start my window 7 on hp Pavilion dv7 - 6123cl

  Hi all

  After hibernation, I couln t wake up my laptop. He gave me some ugly opinions, like intruction error 0 x 000000001200 and i/o error 0xc0000185. When I ran the test of primary hard drive colonettes, the result was "hard disk complete 1 (305). Currently, I do a memory test as well.

  Hope to receive everyone's power backwards to revive my laptop.
  Thank you

  Kim

  My laptop computer product ID was LW176UAR #ABA

  MODEL DV7 - 6123CL

  Hello

  305 error code is a failure of the complete (Full) disk Self Test (DST) and would indicate that hard is defective and must be replaced.  This is also consistent with the question of commissioning.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

  Kind regards

  DP - K

• wczdlg.dll and netshell.dll missing and cannot start my Windows Firewall

  Hi all
  I hope that someone will be so good to help my with this situation I tried (and failed) solve this past week or so.

  I lost my firewall, l, and network connections.  As advised I checked the status of the automatic Wireless Configuration.  The State was "arrested" and was not a solution for this.  I continue typing applications for a solution ot wczdlg.dll and netshell.dll missing.   Now I can sign BT.openzone - it's the only way I can use the web.

  Also I can't start my Windows Firewall.  I have no idea why my system is so badly damaged - the only situation I had was that my charger no longer works and my laptop crashed.  I also brought my laptop (HP compaq nc4200-Xp) to my daughter.
  I don't have a recovery disc and the disc I have with drivers does not download.  I would be grateful for any resolution of this problem.    I'm only a moderate ad user have no knowledge regarding the actual system so need advice step by step.
  Thank you very much
  Jacky

  Hi Jacky,

  Thank you for your response.

  I suggest you follow the steps in the link below.

  Could not start the Windows Firewall service in Windows XP SP2:

  http://support.Microsoft.com/kb/920074

  Note: This also applies to Windows XP Service Pack 3.

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Could not start the Windows Vista firewall

  Hi all

  I can't start the Windows Firewall service in anyway.
  I can't open it via Control Panel, as it is said simply: "the Windows Firewall settings cannot poster because the asscioated service is not running. You want to start the Windows Firewall service? »
  I click "Yes", then he said: 'Windows cannot start the Windows Firewall service. There is no error code indicated.
  I tried running "wf.msc" using the Microsoft Management Console. When this window appears, he says: "there was an error opening the Windows Firewall with advanced snap-in security.; The Windows Firewall with Advanced Security snap could not load. Restart the Windows Firewall service on the computer that you are managing. "Error code: 0x6D9.
  As it seems, I can not start it this way or the other.
  I pressed Ctrl + Alt + Delete and click on the Services tab, then click services on the bottom, and this opens the Services window.
  In the new Services window, I try to start the service "Windows Firewall". I get a message saying: "Windows could not start the Windows Firewall service on the Local computer.; Error 1068: the dependency service or group could start. »
  Therefore, it does not. The service is set to automatic.
  I found another process called 'Base filtering engine', which I discovered is related to the use of the Windows Firewall service. Then, that I try to start this service, and he said: "Windows has no start the engine service of filtering based on Local computer." Error 0 x 80320009: an object with this GUID or LUID already exists. »
  Still, I can't find a way to fix the problem. In addition, the service is set to automatic.
  So if someone could help me, give me ideas or tell me how to solve the problem, it would be greatly appreciated. Thanks in advance.
  P. S. sometimes, when I type things in the command prompt, I get a message saying that "the requested operation requires a rise." What it means
  ?
  EDIT:
  The base filtering engine
  IKE and AuthIPsec Keying Modules

  Internet Connection Sharing (ICS)

  IPsec policy agent

  Routing and remote access

  Windows event collector

  Windows Firewall

  All of these services don't work, with each saying "Windows did not start the * service * service on Local computer.; Error 1068: The dependency service or group could start. ", with the exception of the Base Filtering Engine service.

  EDIT:

  I believe that the motor of filter of Bae is the root cause of the problem, because when I try to start it, it says "Windows cannot start the engine service of filtering based on Local computer. Error 0 x 80320009: an object with this GUID or LUID already exists. ", so that all the other programs on this service, said depedent" Windows did not start the * service * service on Local computer. " ; Error 1068: The dependency service or group could start. ».

  EDIT:

  Hello everyone, I solved the problem. The problem is a corrupted, file called "secdrv.sys. To resolve this problem, I had to first download the file "secdrv.sys' out of my operating system CD. To do this, you must create a partition and "mount" a file on CD, on the newly created partition. The file you have to climb is and is called: "*: \sources\install.wim. Extending .wim means a "file system Windows Image" and to see what files it contains, you will need to download what we call the "Windows Automated Installation Kit". Explicit instructions on the installation procedure and where to get this program, is here: "http://www.vistax64.com/tutorials/86959-access-vista-install-dvd-files.html". Once you have the file mounted, just search the area mounted for "secdrv.sys", then copy and paste it in "C:\Windows\System32\drivers" or that where the drivers from your system. After that, restart and the BFE service and all of its dependencies should work properly. Thanks for the good help like SpiritX.

  Hello everyone, I solved the problem. The problem is a corrupted, file called "secdrv.sys. To resolve this problem, I had to first download the file "secdrv.sys' out of my operating system CD. To do this, you must create a partition and "mount" a file on CD, on the newly created partition. The file you have to climb is and is called: "*: \sources\install.wim. Extending .wim means a "file system Windows Image" and to see what files it contains, you will need to download what we call the "Windows Automated Installation Kit". Explicit instructions on the installation procedure and where to get this program, is here: "http://www.vistax64.com/tutorials/86959-access-vista-install-dvd-files.html". Once you have the file mounted, just search the area mounted for "secdrv.sys", then copy and paste it in "C:\Windows\System32\drivers" or that where the drivers from your system. After that, restart and the BFE service and all of its dependencies should work properly. Thanks for the good help like SpiritX.

• How to start the Windows Security Center?

  Original title: ask questions on my lap top trobleshooting

  01:00 ariffin... Use window 7 Professional (how I can't start the window Security Center)

  This might help you:
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/2d16d7dd-b805-4014-8a20-a23926816997
  http://BBS.blackviper.com/index.php?topic=2011.0

• Cannot use the quick start of Windows 8

  Given that I have install a new SSD, I can't start my windows to activate the quick start mode, when I close it, then windows running perfectly.

  Blue screen appears while the quick start mode, seek help.
  

  I have check ram and chkdsk, there are no bad sectors, HELP!

  Hi Choy,

  Please contact Microsoft Community. I appreciate your efforts to solve this problem, I'll probably help you with this problem.

  To better understand the issue, I would like to know what is the brand and model of the computer?

  This problem might have occurred because of these reasons:
  1 conflict between third-party applications or equipment.

  2. bad power settings.

  Try the steps listed here:

  Method 1:

  I suggest you to remove all external devices except the keyboard and mouse. Now set up your computer in a clean boot state, and check if it helps. Setting the system in a clean boot state will help you determine if third-party applications or startup items are causing the problem.

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135/en-us

  Note: After the clean boot troubleshooting steps, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Method 2:
  If the problem persists, I suggest to create a new power plan and customize the same function of your needs. Check if it helps.
   
  Power plans: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-8/power-plans-FAQ

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• I can't start my Toshiba Journe, the display window (the screen) is frozen

  I need help,

  I can't start my toshiba Journe, the toshiba
  Look at a window is frozen!

  What can I do to start again without the frozen window (screen)?

  I have reset the toshiba Journe but it has not been successful

  Drag the reset button to the left first, then to the right. Then, press the power button to turn on the DAY. E TOUCH.

  Does it work?

• just started using windows live mail and it strips attachments PowerPoint, I receive. How can I change this?

  just started using windows live mail and it strips attachments PowerPoint, I receive. How can I change this?

  Hi hanksterman,

  The question you posted would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the support you want.
  http://windowslivehelp.com/product.aspx?ProductID=15