I can't turn on the firewall of Windows 8.
Hello
Hello
Tags: Windows
Similar Questions
-
How can I turn off the CSS rule window?
Ah, I see - I don't think there is a way to stop this behavior when you are working in Design view in DW CS4. If you were still using CS3, you could deselect the "use CSS instead of HTML tags" in the General preferences category, but who went in CS4.
Best - Joe
-
cannot turn on the firewall in windows vista
I went to the control panel to turn on the firewall, but a screen will appear that says: "due to a problem not identified, windows cannot display the firewall settings." When I click on parameter update now a screen said, "firewall Windows was unable to make the requested updates". Any ideas on how to proceed from here?
Hello
You can run this fix:Diagnose and automatically fix problems of Windows Firewall service -
Unable to re - turn on the firewall in Windows Vista
How can I turn back, the Windows Firewall that came with my Vista Home Premium... gives the computer to my grandson.
No matter what I do, I can't turn it back on... I turned it off because I bought something else safety and did not want 2 firewalls. Pleeeeeeez help me. Beth
Hello
If you always use with its own firewall internet security suite you should not activate the vista firewall
2 firewall can cause conflicts within the operating system
If you no longer have the other firewall installed, read this
http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
-
Can not turn on the firewall...
Whenever I try to turn on my firewall, I gives me an error for letting me know that Windows could not process the request. I was wondering if anyone else has had this problem, and I think it's probably a virus.
Your laptop has an overheating problem (something that you did not clear before that).
So that should be your main concern.
As soon as possible (if you haven't already), copy all your personal documents and files on an offline support (USB, flash or CD/DVD drive external HARD disk drive).
The laptop is apparently reached the end of its useful life.
You can get a quote on repair of the material and compare the cost of a new pc. You want to check a good local reputation to small not big-Box-store shop on quote.
Before you know it, our assumption was that she had a malware infection and who had been my main goal. The assumption is still legitimate because you reported punches a.
You can consider a notebook cooler (of an electronics store) to mitigate the heat problem, but that will probably be only slightly lower. The laptop hard drive may be causing the overheating.
-
I use McAfee Firewall as my firewall. Now when I try to turn it on, it continues for less than a second, then turns off. Firewall Windows also not be.
My computer rebooting in itself guard so I can't complete a virus scan. In one place, he suggested I have try in Safe Mode, but it didn't work (and he told me that it did not work because I couldn't connect to the internet). I tried "Safe Mode with networking" and he would not even let me scan.
Another thing, the last time that I tried to scan it got stuck on "Internet C:\Windows\SysWOW64A\config\systemprofile\AppData\Local\Microsoft\Windows\Temporary / / Desktop.ini. This makes me think that this could be the problem, so I tried to get him to put the file in "VirusTotal. I was able to get to him before that I got the idea to put it in "VirusTotal" but now it won't let me and he says:
"You don't have currently not allowed to access this folder."
"Click Conitnue to have permanent access to this folder."
When I try to click on "Continue", it only ever through.
I tried to change the 'Owner' under 'Security' tab but it still doesn't work, so I can't check to see if the file is a virus.
Should I try to download a new antivirus program to scan my computer?
Sorry if this is in the wrong category. I have so many problems, it is not easy to categorize.
Uninstalling McAfee completely.
Do not use any product that claims to make your computer run better. Almost all of them are either false, themselves, an infection, or put your computer at risk. Delete everything that claims to be there to prevent the infections or pretends to make your computer work better, except for the singular than an antivirus product.
It is a controversial topic, but your choice of AV software may be something you want to take a 2nd look. I suggest you visit this website to get an idea of what AV software made the best work, depending on what type of user you are: http://www.av-comparatives.org/ is a non-profit that has been around for a long time and I hope that their results.
When you interpret these results, remember the difference between a product that detects 95% and the other 99% of infections, it is actually 5 times more likely to allow an infection.
I pick up after about 150 Windows PCs and I have more than 13 years. Until last September, the only AV software that I would allow my clients to use was Norton Antivirus. Note that this is not the same as any other product, Norton 360 or Internet Security. My clients rarely know infections.
Last September, Symantec (Norton owner) decided to no longer sell such a product. After much research, I decided on Bitdefender Antivirus 2015 +. I installed it on most of these PCs to date and has never been a problem, and it has been on a course of about 11 months now... It is a better product than Norton. It is also cheap. One of the things I love the most about it, is the silence and discretion. Especially if silenced you its function "portfolio".
My customers know that if they install any product of 'Internet Security', I won't work on their computers until it is deleted. Very well, I learned the hard way that other components of these products (other than the AV itself) IS causing more problems than any profit that they bring and work mainly by stopping the Windows component that does a very good job of this particular task still. The problem is that when I started to work on a computer with an IS on it, I could spend hours trying to diagnose the problem, only to find out that by taking the product of the IS, the problems have become much clearer and easier to solve. I think that the product of the IS actually hides the problem.
As I said, this is a controversial topic and you will find many different very strong opinions. I know that mine is based on a fairly large sample over a long period, and are consumers of consumer type Windows.
Please note. You should never have more than one protection software installed. Always make sure that you completely remove the firmware all protection before installing a new one. That contains software that may have come preinstalled on your computer when it's new
Totally impossible to delete most of all AV software simply by using the standard uninstallation tool Windows 7. Most of the majors also publishes a "removal tool" that gets the rest. If you do not completely remove it, it will cause very hard to understand and diagnose problems.
-
How to turn on the firewall of windows in auto mode.
Original title: my firewall
My firewall on my pc does not turn on the car, I have to configure manually via the control panel. Can someone tell me please how to activate it through a default setting. Last week I had a problem with my pc and I had to restore all settings after a format. and the firewall did not work properly since then.
Hello
I suggest you to try the steps below and check if it helps.
Method 1:
Check the status of the Windows Firewall
a. Click Start, click Run, type services.msc and click ok.
b. from the list of services, check if connection Windows Internet/firewall (ICS) sharing is set to automatic or manual.
c. double-click the service, and if it is set to manual, then replace the automatic.
d. click ok and restart the computer to see the difference.Method 2: Try to run the fix it from the link below, if you have a Windows XP Service Pack 2 or later versions.
http://support.Microsoft.com/kb/283673#FixItForMe
Hope this information is useful.
-
Cannot turn on the firewall of windows 7
I just got a new Dell computer. For some reason, I can't turn on windows firewall 7. The option is not grayed out, but when I click on 'recommended use of parameters' nothing happens. I did a full scan with Windows Security Essentials and there is no virus.
Hello
To resolve this problem, you will need to follow these methods provided below.
Method 1: Please run "services.msc", "Event controller Windows" stop first and then make sure that "Base filtering engine" service is started.
On the Start Menu, type devmgmt.msc, and then open Device Manager. On the view tab, select "Devices by connection" and put a check next to "Show hidden devices". Search for the Windows Firewall authorization driver (there will be a gear icon gold). Double-click on that and on the driver tab, make sure that the startup type is set to "Application".
Then start the service "Windows Firewall" and see if the problem is resolved.
Method 2: The driver of the authorization (mdsdrv.sys) firewall is a system protected Windows file. You can run the tool File Checker system and if the file is found to be damaged, it will be replaced.
Proceed with caution.
Go to start / all programs / accessories.
Right-click on the element "Command Prompt" and select the "Run as Administrator" option.
Click on 'Continue' in the UAC prompt.
In the command window, type the following command.
SFC/SCANNOW
Press ENTER.
This will take a few minutes to complete. Try not to use the computer during execution of SFC.
When the tool is finished, restart the computer and review the firewall options.
Let me know the results.Also follow the Microsoft Windows Help article below.
http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
Thank you, and in what concerns:
I. Suuresh Kumar-Microsoft Support.
Visit our Microsoft answers feedback Forumand let us know what you think.
-
I can not turn on the camera with windows 8 installed?
When I go to turn on the camera for Skype, a message appears that there is a problem with the camera.
When I go to turn on the camera for Skype, a message appears that there is a problem with the camera.
Put its stupid but yes here it goes. Click Fn + f6 to access the settings - > click on settings in the camera-> in where you will be able to unlock your camera. Once you do this, you should be able to use your webcam
-
How can I turn off the guide in windows media center?
I recently downloaded the guide in windows media center, and I want to disable it or uninstall it now.
Go on settings, click general, and then go to the automatic download options and uncheck both options, save.
This will stop him to download or update the predefined settings.
Another parameter would be general and click on start up and the behavior of windows, uncheck the box open with windows, save.
That it will take off from the list of start menus.
-
I can't turn on my firewall. My Security Center will not display informfation on the firewall
We had malware on the computer, but deleted. Since this incident, I was unable to turn on the firewall and Security Center does not have information on the firewall. I've deleted and reinstalled security essesntials but it has no effect on the problem
HelloPlease follow the links below to solve the problem.Method 1You cannot enable or disable the Windows Firewall setting on a Windows XP Service Pack 2Method 2Diagnose and automatically fix problems of Windows Firewall serviceSee also,How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?How to recover from an infection of computer virus and how to prevent future infections from computer viruses in Windows operating systemsI hope this helps. -
Cannot install updates or turn on the firewall. Need help please
I have Windows Vista Home Premium 32 bit service pack 2 and I'm unable to install the updates, this is the case since December 2011. I received the error code 80096001. I tried to run the Fix - It, but it does nothing. Help, please! Also, I can't turn on the firewall. I scanned for malware with Security Essentials, Malwarebytes, and none is found.
Thank you, but who has not helped either, so I finally had to use Recovery Manager to wipe the drive and reinstall Vista again. So far so good.
-
I am unable to turn on the firewall on the computer.
I am informed that my safety is controlled by .policy windows group, which has never they are.they stop turn on the firewall, as it is a private machine, .and I am the administrater. No outside person must have control of my safety. I understand there is a way to regain control. Please
Help. Roy Barton
Original title: my firewall is blocked by group policy, how can we turn it on please don't declare the obvious ive tried that.
Hi Roy,
Please contact the Microsoft Community.
You can not turn on the Windows Firewall on the computer. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.
Please answer these questions-
(1) what exactly happens when you enable the Windows Firewall?
(2) what is the antivirus installed on the computer?
(3) where are informed that security is controlled by group policy? What is the full error message in this respect?
(4) what is the version of Windows installed on the computer?
(5) did you do changes on the computer before the show?
I would like more information about the issue.
Assuming that you are running Windows 7 on the computer, I could suggest some common troubleshooting steps.
Method 1-
I wish that you are running the fixit-
Diagnose and automatically fix problems of Windows Firewall service
http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us
Method 2-
I recommend you to perform a clean boot.
Placing the computer in a boot minimum state helps determine if third-party applications or startup items are causing the problem. You must perform the steps in the article-
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135Note: You must follow the step 3 of the article to return the computer to a Normal startup after you perform all the troubleshooting steps.
Now try to turn on the firewall.
Let us know if you have other questions about Windows in the future. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.
Thank you.
-
Can't turn on my firewall.
I was wondering why I can't turn on my firewall. I have windows Vista on a laptop Dell Vostro 1700. I have webroot antivirus with antispyware 'Required by the work' and it doesn't tell me if it is a firewall program. I turn on my windows firewall, but this program that prevents. When I try to turn it on it just says that it cannot turn on the firewall. Any help would be great thanks, Nick
HI NICKLC
This is for Vista
* Open Windows Firewall by clicking the Start button , clicking Control Panel, clicking Security, and then click Windows Firewall.
* Click Turn Windows Firewall on or off. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
* Click on (recommended), and then click OK.NOTE
If you want the firewall to block everything, including the programs selected on the Exceptions tab, select the block all incoming connections checkbox.Please use the RESPONSE FORUM
Justin M. Microsoft Support Engineer Answers visit our Microsoft answers feedback Forumand let us know what you think.
-
Impossible to turn on the firewall
I can't turn on my firewall. This is a new number im having. When I chose the option to turn on/off I get a local saying "firewall Windows settings cannot be displayed because the associated service is not running. You want to start the Windows Firewall service? "when I chose 'Yes' I get another saying pop up"Windows cannot start the Windows Firewall service. How can I fix it? Can someone help me with step by step instructions? Thank you!!!
Fair opportunity...
Check if your antivirus software is supposed to close the Windows Firewall.
Some do it.
Maybe you are looking for
-
OS3 no other event - even though there are events
I installed os3 on my Apple Watch, but the face displays "No. more Events" despite the fact that there are a lot of events. How to view my upcoming events?
-
restore historical data from iTunes backup
Return back you can go to restore the backup of the iPhone data?
-
PCM - d50 &; windows 7
Is it possible to get data pcm - d50 on a computer running windows 7? I hooked the recorder & the computer but nothing happens. They just look at each other. Thank you.
-
DV7-7010us, can not download driver ANYWHERE!
The guy is HE, my name is Joe, and a year ago I bought a laptop Dv7-7010us HP of entertainment edition. I had problems in the past with my Beats Audio drivers and they are usually resolved by reinstalling the most recent driver. in any case one of my
-
My subscription to Vuze is still valid?
Can someone help me? Last may I subscribed to Vuze for £9.99 so I could burn movies that I had downloaded on disks via the Vuze program, but after a few months went by I deleted Vuze because my laptop broke and had a lot of viruses in there after usi