I can't uninstall Advanced Systemcare PRO v3 with the Control Panel, uninstall a program. I have an inspiron 1420 Dell

When I try to uninstall, I get.   the installation files are damaged, you can get a new copy of the program. I have a disc for the program. And installed it, but still not the same thing. all I want to do is remove this program from my computer. Can someone help me?

Hey,.

Welcome to the Microsoft Answers Forum!

As you have a disc of the program of Advanced Systemcare PRO v3, you will have an option to uninstall a program as soon as you insert the disc.

Since you are not able to remove the "Programs and features" program, please use the Windows Cleanup Utility tool to remove the program.

Please use the link below to download the windows Cleanup utility:

 http://support.Microsoft.com/kb/290301

For more information about how to uninstall a program, see the link below:

http://windowshelp.Microsoft.com/Windows/en-us/help/be5d0190-7bdc-412e-B342-04471a2f56ca1033.mspx

If you always fall on the issue, I suggest you to contact the manufacturer of your program to get the best possible support.

I hope this information helps you, good luck.

Kind regards

Manasa p-Microsoft Support.

Tags: Windows

Similar Questions

  • How can I remove a program are not not in the control panel: Add/Remove program list

    How can I remove a program are not not in the control panel: Add/Remove program list? I have a shortcut to a program called "Smart Engine" that pops up right on my desk. I can't find under anything else to remove it. I have remove the shortcuts, but they reappear everytime I restart.

    Smart Engine is a Trojan horse...  If you have MalwareBytes installed, try to run...  If this does not work (and it might because Smart Engine will try to stop it).  Click here for additional removal instructions...

    http://www.Spywares-remove.com/remove-smart-engine-smart-engine-removal-Guide

    --
    Gina Whipp
    2010 Microsoft MVP (access)

    Please post all responses on the forum where everyone can enjoy.

  • Help - I can't uninstall CS2 via the Control Panel Add/Remove programs in Windows XP

    I recently installed an SSD drive and when I went to use CS2 he wanted me to reactivate.

    I followed the instructions but was unable to turn it back on.

    I went to the new files to download and he said first of all uninstall my current version.

    I can't uninstall the current version.


    How to uninstall it?

    John

    http://helpx.Adobe.com/Creative-Suite/KB/manually-remove-Creative-Suite-2.html

  • I can't my happen just an error in the control panel

    Whenever I try to use my control panel I just get an error message saying that windows Explorer doesn't work, then it gose top of page Office

    Hello

    1 how long have you been faced with this problem?
    2. don't you make changes on the computer before this problem?

    Step 1: Search for the issue in the clean boot state.

    Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

    Reference:

    Using the event viewer

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

    Understanding of event viewer

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

    Procedure to view and manage event logs in Event Viewer in Windows XP

    http://support.Microsoft.com/kb/308427

  • can I uninstall old programs that have been updated

    HP pavilion dv6

    Although I can

  • How can I uninstall a program that does not show in my add and remove program?

    I downloaded a program called Imesh is a file sharing program. Should have never downloaded it. I can not even find an uninstall icon to remove it. I looked in the folder program files and it didn't no Imesh folder.  When I click on the Start button and select programs.  I shows that the icon there but not uninstall icon.

    Can someone help me please? Would be very happy.

    Thank you

    Jlibra2809

    You should never uninstall an application by going to C:\Program Files and simply delete the application folder.

    If there is no link "Uninstall" in the entry of the application in the start menu > all programs, you must uninstall it by going to control panel > Add / Remove programs.  Select the application and click the "Uninstall" button

    Sometimes, you must stop the application before you uninstall it.  This is the case with iMesh.  See--> http://support.imesh.com/index.php?/Knowledgebase/Article/View/28/0/uninstall--install

    Well that does not mention the body of your question by using the control panel > Add / Remove Programs, the subject line is.  So, if in fact you tried that method and iMesh is not listed there, then either

    Reinstall iMesh and see if it then appears in Control Panel > Add / Remove programs

    or

    Free download Revo Uninstaller.  Stop iMesh as described and then use Revo to uninstall.

  • How can I uninstall the old version of java 2 runtime environment (H.E. v1.4.2) when it is not listed in the Add/Remove Programs section in the control panel

    Java shows that I have an old version of Java installed.  I can't see to find this version anywhere.  I can't remove it, if I can't find it.  I looked in the Control Panel, under Java and everywhere else I could think of.  I removed something with the hotfix from microsoft, it shows the old version as Java installed on my computer.  Help!

    Try my computer, search, chk the box to search for files, search for downstairs,

    more options, chk boxes, search for system files, hidden files, etc. We could

    In addition, open C:, file open windows, scroll to the folder.

  • How can I turn off indexing of the control panel. I tried, but failed. I need instructions step by step please

    I want to disable indexing of my computer via the control panel... I tried, but failed.  Can someone give me a route step by step on how I disable indexing with the control panel function?

    Open Add/Remove Programs, locate & open Add/Remove windows components"."

    Locate & uncheck "indexing service", close when thru.

    In addition, we can go to run, type: services.msc

    MSC, highlight indexing, double-click, reset the properties to "disable,"

    'manual' or 'auto', firm when thru.

  • I can't get rid of Highlightly even though I disabled in the extensions and uninstalled in the control panel. (windows 7 pro)

    Highlightly does not appear in the control panel more since I uninstalled it. I disabled the extension in the Add-ons. He however keeps popping up. I have windows 7 pro 64-bit.

    Is there an action actually uninstall Highlightly your list of extensions instead of disable?

    One thing I would recommend is that make you a Reset of Firefox. The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.

    Note: This will make you lose all the Extensions and preferences.

    • Sites Web open is not recorded in less than 25 versions of Firefox.

    To reset Firefox, perform the following steps:

    1. Go to Firefox > help > troubleshooting information.
    2. Click on the button 'Reset Firefox'.
    3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
    4. Firefox opens with all the default settings applied.

    Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

    To be sure that he's gone completely, make a check of malware with some malicious programs, analysis of the programs on the Windows computer.

    Please scan with all programs, because each program detects a different malicious program.

    All of these programs have free versions.

    Make sure that you update each program to get the latest version of their databases before scanning.

    Alternatively, you can write a check for an infection rootkit TDSSKiller.

    See also:

  • Option missing Scan from the control panel for my Officeject HP 8600 pro. How can I get that back?

    I have this printer for a few months now - it works well until today.  Option missing Scan from the control panel for my Officeject HP 8600 pro.

    I have Windows 7

    Access has been-

    Beginning

    Devices & Printers

    HP Officejet 8600

    He opens a box that had a detection option (later), which I clicked to bring up the scan dialog box.

    The option disappeared. I have no idea how it happened.

    How can I get that back?

    1. first of all uninstall the software

    • Click on start button, then go to programs > HP > Officejet 8600 and click on Uninstall.

    2. then go to Control Panel > programs and features

    • Officejet 8600-click and then click on uninstall a program

    3. then download the software on the HP web:

    4 and install with the downloaded software.

    Hope these steps help you,

    * Click the stars KUDOS to say thanks

    * Click the accepted Solution if the answer to the question.

  • I can't uninstall a program. Why?

    Whenever I try to uninstall this program, nothing happens. I tried clicking the button uninstall several times, but he was told to wait until he did uninstall. I'll come back later and its still there. I uninstalled before and when I did, a saying, that I needed a password came and after it was entered, it uninstalled without problem. Not knowing much about this side of computers, I went to the internet to study. I came across someone suggesting install RegCure Pro to clean a computer with problems. I did it, it scanned my computer and said that a lot was wrong with her. To remedy, however, I had to buy, which I have not yet done. The fact that the things wrong with my computer has any connection on why I can't uninstall this program?

    Hello

    ·         Are what program you referring?

    ·         Did you do changes on the computer before the show?

    ·         The issue is limited to a particular application?

    ·         What is the exact error message?

    Follow these methods.

    Method 1: Unregister and re-register Windows Installer. Follow these steps:

    (a) click on the Start Menu.

    (b) type msiexec /unreg , and then press ENTER.

    (c) click on the Start Menu.

    (d) type msiexec/regserver , and then press ENTER.

    Method 2 : If the steps above fail, check if there are amenities waiting on the computer using the registry.

    Empty registry key "InProgress".

    Check the following registry key:

    HKLM\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress

    Empty/rename "PendingFileRenameOperations" registry key

    Check the following registry key:

    HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\PendingFileRenameOperations

    Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see the link below.

    Back up the registry

    http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  • I just got a new Macbook Pro when I reinstall my CS4 Master Collection everything works fine, but I can't get Acrobat 9 pro to get the serial key

    I just got a new Macbook Pro when I reinstall my CS4 Master Collection everything works fine, but I can't get Acrobat 9 pro to get the serial key

    OK, it worked. Someone suggested dismantling drives all connected. In fact, no luck. But while all the disks were taken out and closed all applications I uninstalled Acrobat Pro using the application in the folder Acrobat Pro. Then I went back to the installer and have already told him only to install Acrobat Pro. Once done everything first, I opened Acrobat Pro. He asked to install some extras and I said no a few times. It opened and worked on a test pdf. With her still open I tried to open Acrobat Distiller. He did not ask a serial number, but I wanted to just install an extra. I said no again and it finished opening. Wanted to be my default PDF application but an extract which is better so I said, person not the last time. He has worked to create a perfect pdf of an Illustrator EPS. Hope this works for you also.

  • I can't uninstall a program from my laptop HP Pavillian?

    Well, I want to uninstall this program Emusic Manager to my laptop but cannot. I tried like 5 times, but nothing happens. I finally use the Task Manager to click out. And Yes, I tried using programs to remove this program too. Have you ever had this problem with Emusic? And can you help me please? It is a new laptop, I just it 2 months ago so I won't have any problems with it!

    If you have nothing nice to say then keep your mouth shut!

    Hello Cuddleboo45. I understand that you are having problems uninstalling a specific program called emusic. Is this correct?

    That emusic can be a piece of adware by Symantec, which probably explains why you are having problems removing it.  However, there are also legitimate software named Emusic, so I can't be certain of that.

    I have a few suggestions to remove the software. The first is to try to remove it from safe mode. Follow these steps to enter the mode on your machine safe. Once you're in safe mode, you'll want to try to uninstall the software just as usual (from the control panel).

    If this does not work you can try to use a spyware/adware removal tool to solve the problem. I recommend using either Spybot Search and Destroy or Malwarebytes. Install one of these programs (but not both!) and run it in safe mode.

    Let me know if one of these solves the problem.  If these solutions do not work, I'll give you the next steps to try.  Have a great day!

  • I can't uninstall a program called Uniblue Registry Booster

    As I was not able to uninstall this program in the Control Panel, I got errors on my PC. One thing was on python.dll? I can't chat live with Norton either.

    This Uniblue program is proven to spoil my PC. He deleted all my files, and when the error came at the beginning was Uniblue inside. I used all the tools and all I could think about. Thanks for your advice, and I've read a few articles where others had the same problems, but there were arguments? So I guess the better to be safe than sorry! TY has done restoring to the factory and just ran one of my 5 to backup discs.

  • I can't uninstall a program on my laptop (MyWebSearch-Zwinky)

    I can't uninstall a program on my computer laptop (MyWedSearch-Zwinky) he said that he could not find specified package. What can I do? Help, please...

    Hi ginger,

    It's Jason with Mindspark Interactive Network technical support.

    We want to assure you that, contrary to what you may have read or heard, My Web Search® and its related products is not and has never been malware, spyware or adware. In fact, the My Web Search toolbar has been tested by the editors of security software and has been shown repeatedly to be free of any threat.

    The toolbar can be removed by using the standard Add/Remove feature of your Windows operating system.

    Important: It is not advisable to manually remove any files or registry entries, or to use the 3rd party software that can leave artifacts behind.

    Please note that you will continue to see the My Web Search toolbar until you close and reopen all instances of your Web browser. A reboot will complete the uninstall.

    We hope this helps, and that in the future, you will take a second look at the My Web Search toolbar.
    For more information on the Mindspark or My Web Search toolbar, please visit

Maybe you are looking for

  • Acquisition of data GPIB with oscilloscope TDS 210 tetronix should change to LeCroy wavejet oscilloscope 324

    Hello I used Tetronix TDS210 oscilloscope to the data of the Squire. But I need to change the oscilloscope LeCroy Wavejet 324 now. The program is not even read the signal now. What are the things I need to change? Thank you

  • Deleting a "Create GPS trail"

    I have 2010 streets and trips w/GPS...  I have created a roundrobin trail on my way this morning and cannot remove it.  I went to 'Help' and what he says... .delete it by selecting the track and them by pressing DELETE.   I left and click with the ri

  • Fo a Photosmart 7150 of pilots. No cd

    I need the drivers for my Photosmart 7150.  CD does not work.  I use Windows 7.  I have worked before May when I had to unplug it for a computer tune up.

  • Slight hiss on Z2 camera

    I recorded the same scene on the compact Z2 and Z1 and Z2 has a metallic sound coming from it. Z1 compact: https://www.YouTube.com/watch?v=EmYoewxtnAA Z2: https://www.YouTube.com/watch?v=KsuzRX8ylwA

  • Blocking Windows with videos and songs still plays

    I had this problem a few times in the past, but this is not common. Today it kept happening every few minutes, and so I hope that I may know how to fix it. I am using windows 7 Home premium 64-bit. Windows crashes suddenly and my mouse can still move