I can't uninstall the old Java version 6 update 29. I get a "error code 1606: could not locate the directory."

Similar Questions

• When you try to activate Windows I get an error: Code 45123 could not establish a connection with the activation server.

  the error number is 45123 and said "we could not establish a connection with the activation server." Please give me an answer to this error and try to solve it! If you want I can send you my product key to activate it, but I think it's better on email not here because there are a lot of... the pirates who have access to this site! provide me with an email address and I'll send you my product key and try to activate it and then give me the id I need to enter the activation window! Thank you!

  I solved this problem! Thanks for the help!

• While the plug-and-play was still there at all, and I tried to go I still receive error message 2. could not locate the file.

  Here's the situation.

  First of all only started to the top of my Asus to find was no sound. Following up to plug-and-play service has not started. It is now removed apparently.

  Here are the solutions I tried, in and out of safe mode:

  While the plug-and-play was still there at all, and I tried to go I still receive error message 2. could not locate the file.

  In CMD sfc/scannow reached 32%, then breaks down, saying: it finds corrupted files, but could not fix.

  It Startin via msconfig did not work.

  Tried to go through Device Manager, which is completely empty for some reason any.

  System Restore is restoring before this problem. When you attempt a restore, plug-and-play service is not returned to the existence, defective or otherwise.

  I knew, but there may be malware, mutiple scans with several services did not find anything.

  I tried to contact microsoft help and they might suggest only I have upgraded to windows 10. Tried several times, and he has failed to be upgraded, every time. For the most part just download windows 10 and then by restarting the computer as if nothing happened. Any ideas on how I can fix this?

  Hello

  Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing.

  I would like to ask you:

  • You are running Windows 7 or Windows 10 on your PC?
  • When was the last time it was working fine? Remember to make changes to the computer before this problem?

  Given that you are unable to complete the scan of SFC and Task Manager is empty, usually reinstall or do a repair install is the best choice of action. However, we can try to fix these files and check if that helps. To do this, refer to the steps below:

  1. Open the start menu and type "cmd".
  2. Right-click on the command prompt and click "run as administrator".
  3. Type the following commands and press ENTER after each.

  DISM.exe / Online/Cleanup-image /Scanhealth

  DISM.exe / Online/Cleanup-image /Restorehealth

  After you run these commands, restart the system and check.

  You can also view,

  Difficulty errors of corruption of Windows by using the DISM tool / System Update Readiness

  https://support.Microsoft.com/en-us/KB/947821

  If you are using Windows 7 and have the product key for this. You try to run an upgrade in Place to fix all the corruptions.

  Refer,

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  Hope this information was useful.

• Vista - Error Code: 9370001 (could not install the system preparation tool)

  I get an error code 9370001 ever time I try to update my home premium 32-bit systememember - this is a public forum so never post private information such as numbers of mail or telephone!

  Try to download and install manually by download on your desktop and install them one by one. Insert the number of KB to get updates on the right and choose the one corresponding to your version of Vista: http://www.microsoft.com/downloads/en/default.aspx.

  If this does not work, try a boot minimum http://support.microsoft.com/kb/929135.  Disable your security software.  Then try the updates again. Once this is done (if it worked) don't forget to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  Also read and execute the steps ofhttp://support.microsoft.com/kb/971058.

  If this does not help, please transfer your question in Forum Windows Update:http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where updates experts will be happy to help you.  Please post with the information requested here:what to post in the Windows Update forum

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I have the inability to run Windows Update. I get this error: Code 80070005

  I have the inability to run Windows Update. I get this message: Windows could not search for updates. An error occurred when the new updates for your computer. Error: Code 80070005 Windows Update encountered an unknown error.
  I tried a few patches, but they do not work. Including those of ACCESS DENIED. And another by Kim.
  What's next?

  Hello

  • Have what troubleshooting measures you tried?

  Error code 80070005 means generally that you're not quite allowed to install updates. Access may be denied if you have logged on to the computer as a standard user and this account does not have permission to install updates.

  To resolve the problem follow the steps that are listed in the methods below in the order listed, starting with method 1.

  Method 1:

  Log the computer as an administrator or as a user with administrative rights.

  Method 2:

  One of the most common causes of this error code (access denied) is the Anti Virus and Anti Spyware software running on the computer. You can try to disable them, and then try the updates again.

  Note: Runs the computer without antivirus software or firewall is a potential threat to the computer; don't forget to activate the security software after completing the troubleshooting steps and after you have identified the problem.

  Method 3:

  Try to reset your default security settings.

  Reference:

  How to restore the security settings the default settings?

  http://support.Microsoft.com/kb/313222

  Method 4:

  Reset Windows Update components.

  See:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  This should be it.

• My photoshop will not update, it gives me an error code that is not listed.  The error code is U44M1P34

  I tried several times now to do the last update for the application of CC of Photoshop 2015, it will not install.  It gives me an error code that is not listed in the list that I found in the help section.  I hope that someone else has had this problem and knows what it is before I have to call and find someone who can give me only one I can't answer.

  Please check: U44M1P34 error message

• Error code 28: could not find the drivers. Windows 7 64 bit could not find the drivers for my Seagate Expansion Portable Drive. The same system works for another 32-bit version of windows 7.

  Hi, I would be grateful for help on this, I bought a new seagate expansion external hard drive not too long ago (abt 3 months old) and tried to use the device only recently (to back up my files). Windows has detected the drive but says that it could not find the drivers. (code 28)

  When I tried the drive on a 32-bit computer, it showed up working find and dandy. When it is plugged in the computer of the alien-ware, same error.
  Tried the uninstall from Device Manager and restart the computer, still the same error.
  Services.msc open and found windows install offshore. He turned on automatic, but the same error came out. Plug and play Windows was already working.
  Checked Windows SP1 worked, still the same error.
  He got me completely baffled.
  Before this, I had other problems with USB and disabled driver signature Verifier (I think that's what it was called) before you boot into windows. Worked very well for my flash drives each time that I did.
  I also had another external HARD drive which was held only 160G and it worked, so I'm not sure what the problem is with this particular external hard drive.
  Please help, I'm going crazy on this problem...

  The specifications of my devices are as follows:

  Computer

  Model:

  Alienware M14x

  Type of system:

  64-bit operating system

  Hard drive model:

  Portable Seagate Expansion 1 TB drive

  Hello

  28 error code means that the device was not fully installed.

  Method 1: Connect the device, run the hardware and devices Troubleshooter and check if that helps.

  To open the Troubleshoot utility equipment follow the given link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: You can update the drivers and check out them.

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Additional information.

  Install a USB device:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  Hope this information helps.

• error code 1606 could access the network location

  This problem occurred recently and the only changes that have been made is some 'windows updates' installed. I get the above error code when I try to uninstall 'java '. Unistalling exists that I can not install the new version of 'java '. I looked for solutions and tried the registry fix from the as shown in msft ID 315352, but this has not fixed my problem. My Vista Home Premium operating system

  Try this FixIt

  • http://support.Microsoft.com/kb/2258121
  • http://support.Microsoft.com/kb/886549

• What is going on? Resource not found on the development computer. Error loading VI in lvlib. Load error code 3: could not open the front panel.

  Hello!

  I'm new to libraries of LV and I am compiling my application for the first time with several new lvlib.

  The executable is apparently built without problem, but when I try to run it on the same computer, I get various error messages (4) on the different elements but a single library:

  «LavVIEW: resource not found.»

  "An error occurred loading VI ' LibraryA.lvlib: ItemA.vi '.

  LabVIEW support 3 error code: could not load façade. »

  After that I got the same message for points B, C and D, a final message pops up like this:

  "Missing Subvi LibraryA.lvilib:ItemA.vi in LibraryA.lvilib:CallerX.vi.

  Missing, Subvi LibraryA.lvilib:ItemB.vi in LibraryA.lvilib:CallerX.vi.

  Missing, Subvi LibraryA.lvilib:ItemC.vi in LibraryA.lvilib:CallerX.vi.

  Missing Subvi LibraryA.lvilib:ItemD.vi in LibraryA.lvilib:CallerX.vi. »

  I am not getting any errors for all libraries, so I wonder what is happening.

  So far I have tried:

  -Mass compilation, a few times

  -Check / uncheck 'delete unused library of the project members' and change project after library file removed unused members in the additional Exclusions Page «»

  -Add the screw mentioned in "Still included" in "Source Files".

  When I added the "Always included" screw, I rather got the following (4 times, end to end):

  "The Vi is not executable. The version of LabVIEW full development is necessary to correct the errors. [...]"

  Any other ideas?

  Thank you!

  I have it!

  My problem wasn't a bug compilation of the library at all, but a Scilab Script one.

  The solution can be found here: http://digital.ni.com/public.nsf/allkb/D21F6AC8CFC39E318625756600553B1E

  Thanks for your help, it made me identify!

  Good day!

• I can not download update KB976325 I get 8007065E error code.

  I tried to download this update for 2 or 3 weeks and I get this error message. Other updates are downloaded without problem. What is going on?

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  You can also start a free update Windows e-mail support incident request:
  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Why do I get the error Code: Ox80240016 (could not install the updates of Windows Defender)

  Family XP Edition using

  0 x 80240016 operation WU_E_INSTALL_NOT_ALLOWED tried to install while another is in progress or the system was waiting for a mandatory reboot.

  Please try to restart your machine and new updates.

  You can also try the steps outlined in this article:

  957307 error message when you try to install updates from the Windows Update The web site or on the Microsoft Update Web site: ""0 x 80240016 " "

  http://support.microsoft.com/default.aspx?scid=kb; EN-US; 957307>

  UTC/GMT is 22:54 Sunday, August 28, 2011

• I am using Acrobat Reader DC. I'm used to be able to open attachments to e-mail .pdf by double clicking on the attachment. Since there are a few days, it no longer works 't get an error message "Acrobat could not connect to a DDE server. However, I ca

  I am using Acrobat Reader DC. I used to be able to open .pdf attachments to an e-mail by clicking twice on the attachment. Since a few days it doesn't work like that.  I get a message error "Acrobat could not connect to a DDE server. I discovered a way around - I have to listen to samples and then double-click on before its opening. It's heavy. Can I avoid it? How can I just double click again?

  My BIG problem is with .pdf files already in my computer. Worse - these .pdf files open at all.

  @

  Please help me!

  Hi Eddie Otte,

  Please see this thread with a similar problem: I get the 'acrobat fail send a DDE command'

  Check if this helps you solve the problem.

  Kind regards

  Meenakshi

• error code 80070490 could not be updated. 11-09 has been updated. I'm trying to update but it fair to say that try again with error code nothing changed on my computer. I'm pretty new to this. can someone help me please

  error code 80070490 cannot install windows update.

  Ken,

  0 X 80070490 - ERROR_NOT_FOUND

  Corrupted system file.  You will need to perform an upgrade on the spot or reinstalling the operating system.

  Ignore the title: Some Windows Vista functions may not work, or Windows Vista may stop respondinghttp://support.microsoft.com/kb/929833

  A repair install is that the usual of SFC/scannow solution does not work.

  You receive an error code "0 x 80070490" when you use Windows Update or Microsoft Update Web sites to install updateshttp://support.microsoft.com/kb/958044

• Error code 39, could not load the driver for my cd/dvd device.

  I tried the advice of troubleshooting, uninstalling and reinstalling, but it does not fix it.  I think that the driver on my computer is corrupted.  I can't get the original driver from the CD provided with the computer... because the CD player does not work... so... can Ow I get the driver to try a new?  And exactly how to load this driver?

  Here are the specs of the drive: TSST corp DVD + RW TS-H653B

  Driver version: 5.1.2523.0

  Please help, trying to install a new printer and cannot do without my CD drive... ack!

  Thank you

  Hi RhonBB,

  You can follow this link & check if the problem persists.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I need help with the following updates. I get an error code "646".

  Update of security for Microsoft Office 2007 (KB951550)

  Update of security for Microsoft Office Excel 2007 (KB978382)

  Update of security for Microsoft Office System 2007 (KB951944)

  Update of security for Microsoft Office System 2007 (KB978380)

  The 2007 Microsoft Office Suite Service Pack 2 (SP2)

  Update for the junk e-mail in Outlook 2007 (KB979895) filter

  Update for Microsoft Office System 2007 (KB967642)

  Manually download each update here:

  IE: http://www.microsoft.com/downloads/en/results.aspx?freetext=KB951550&displaylang=en&stype=s_basic

  and install the same.

  TaurArian [MVP] 2005-2010 - Update Services