I can't update the software for a camera.

Similar Questions

• can not install the software for all in one photosmart 2610xi of disc of windows 7 pc

  I can't install the software for all in one photosmart 2610xi of disc of windows 7 pc.  Goes so far then stops and says cannot use the command "run as".  I am the administrator and logged as such.  I would like to use the software provided with to send faxes and others.  I can use the printer since the buttons on the printer and it prints from all programs... I just wanted to use this software.  Any suggestions?

  Thank you

  Hello

  The installation disk supplied with the printer is not compatible with Windows 7, as the device was manufactured prior to release of Windows 7.
  No matter which compatible OS are registered on the CD...

  A newer version of the software for Windows 7 can be downloaded from the HP site.

  Before installing the software, be sure to follow the steps below:

  1. Enter the control panel > devices and printers.
  2. Right-click on the icon Photosmart 2610 and lick to withdraw an instrument.
  3. Disconnect the USB cable between the printer and restart your PC.
  4. Follow the below installation, do not connect USB until prompted to do so during the installation of the software:
     http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-76831-1&cc=us&DLC=en&LC=en&OS=4062&product=421134&sw_lang=

  Kind regards

  Shlomi

• Where can I find the software for my Memorex cd & dvd LabelMaker?

  Where can I find the software for my Memorex cd & dvd LabelMaker?  I lost the original supplied with labels.

  Hello

  You must go to the Memorex website and browse the support for your specific product ID page. To do this, go here: http://www.memorex.com/en-us/Digital-Storage/Disc-Labeling/ .

  If this does not work, contact their support department directly. Let me know if this solves the problem for you.

  Kind regards

  BearPup

• I can't install the software for my printer of series e-all-in-one-hp deskjet 3070 on my mac.

  Hello

  I just bought an hp deskjet 3070 series e-all-in-one printer and it says that I'm unable to install the software for it because it requires 10.6 or below. Any suggestions on how to get this up and running?

  Thank you

  Tim

  Hi Tim,.

  The CD that came in the box is not intended for Lion mountain as the printer was made before the release of the OS.

  You can download the latest version of the software for your operating system below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-107189-2&cc=us&DLC=en&LC=en&OS=219&product=5068754&sw_lang=

  After completign the installation, be sure to restart and update the software by clicking the Apple icon, then software updated.

  Shlomi

• CAN´t install the software for mouse Hyperion G402

  I can´t install the software, whenever I get the message: 'this software is not compatible with your operating system', I made sure I downlaoded the correct software for Windows 7, 64-bit. I called Logitech and I was told that it was a matter of Microsoft. Can someone help me please?

  It is not a Windows problem, but clearly something is wrong, don't know why the software is not installed for you well.

  I use software LGS on Win7 64 bit for years (G13, G710 + and a new all current G502 to run on)

  version 8.56.109 software atm).

  -Are you logged on as administrator?
  -You have downloaded LGS 8.56.109 or 8.57.145?

  -There is a firmware update for the G402 on the next page, which can help

  http://support.Logitech.com/en_US/downloads

  -You can also try to install in safe mode (press on and hold F8 - or I believe F2 on some motherboards - before Windows logo appears).

  clean boot or-

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  -I see that there are several threads on the forums of Logitech about your problem however.

  Assistance telephone logi is perhaps not as good as the forums.

  -If no suggestions on the existing threads can help you start your own.

  Maybe you've already been there, but--

  One of the suggestions on this thread is that Firefox will automatically download the 32 bit version.  But I use Firefox

  and no similar problems. If the file name ends with _x64 then you obviously do not have this problems either.

  .

• Where can I get the software for the multimedia keyboard KU-9963?

  I have a multimedia keyboard HP KU-9963, but can't find the software to configure the keys of those.  Any help would be appreciated.

  Hi, John:

  I had once a Business Desktop d530 with a keyboard with about 8 buttons or so who launched applications.

  Just as a shot in the water, maybe you can try this driver for the keyboard, I had of the d530 in the chance that it will work.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=316720&prodNameId=316722&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=vc-45469-1

  Paul

• Where can I find the software for my model 1027 keyboard and mouse 1007?

  I have software 6000 for microsoft wireless comfort keyboard and mouse, I have a new computer, but the disk is missing, where can I find the software on the Microsoft site?  I have exhausted my resources as hardware microsoft pages do not list my keyboard (1027) (ms part no: X-802424-01), or my mouse and the suite has drivers for all the buttons.  Can you help me?  Thank you for your time I really need this program for my hardware working...

  I have a Microsoft Wireless Keyboard 6000. It gives also a part number, but it is not the identification of driver download.

  Go to http://www.microsoft.com/hardware/en-us/d/wireless-keyboard-6000
  Enter your operating system and download the drivers if you have 32-bit or 64-bit.

  Then go to the section of the mouse.
  http://www.Microsoft.com/hardware/en-us/d/wireless-mobile-Mouse-6000
  They do not list the mouse or the keyboard, based on part number but the name. Return your Microsoft keyboard and mouse and get the exact name of your hardware.

  I hope this helps.

  Marilyn

• Can I update the software of my HDR XR350 camcorder?

  My HDR XR350 Camcorder creates many mistakes occasionally and he stops shooting and sometimes I lose what I was shooting

  I think it is software problems so I need to know if I can update its software

  Thank you!

  Hi jhanna,.

  Thanks for the information. The buffer overflow can be due to vibrations in the internal mechanism of the camcorder so stop recording. It can also be caused by loud noises coming into the unit. I recommend you to perform a power reset to solve this problem. Remove the card from the camera, if necessary, before you do.

  Turn the power off and make sure that the camera is not connected to a power source. Remove the battery and turn on the power for 30 seconds to a minute. Turn the power off again and reinsert the battery. Start the camera as usual and start recording.

  If the issue is not resolved, the camera may need service.

  For further assistance about your concern, please contact the representative offices of offices/Sony Sony nearest to your place of residence in the Asia-Pacific regionhttp://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to the proximity, they are in a better position to respond to your questions or concerns.

  If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch

• How can I get the software for my keyboard model 1. 0a Wireless Comfort 1045?

  Original title: http://www.microsoft.com/hardware/download/download.aspx?categary=MK

  Nice day! -I HAVE A COMFORT WIRELESS KEYBOARD 1. 0 A MODEL 1045 I WANT TO USE AGAIN. BUT I MOVE THE SOFTWARE. YOU CAN HELP ME GET MY KEY BOARD GOES AGAIN PLEASE.  Hank MASON

  Hello

  Download drivers for wireless keyboard Comfort that would work for the model wireless comfort keyboard 1. 0 to 1045, try to download the driver from the following link:

  http://www.Microsoft.com/hardware/download/download.aspx?category=MK

  Hope this information is useful.

• Where can I download the software for Mac OS?

  Just bought a MAC computer, but alas although my package came complete with botth a Windows and a MAC drive I never thought I would buy a MAC (too expensive). So now I have one and I threw my MAC drive some time ago. Is there anyway to download the program or do I need to buy new one?

  You have not indicated what product you are looking for so I can only provide a general link where you can find it (maybe).

  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important article Instructions on the pages to download to this site or the download may not work properly.

  http://prodesigntools.com/tag/DDL

• Update can't update the software moved...

  Dear members,

  I have a number of Adobe Creative Suite CS5, Lightroom, PSE8 and other titles.  I'm their running on a Mac Pro.  After installation I thought that my Applications folder very messy with all the Adobe icons and folders, so I consolidated programs and their attendant to the files in a subfolder.  I am able to run them all without problem, although many of them have complained of moved and changed some prefs by operating the first time after the move.

  However, I now can't update with the update.  I get the following message and the update will not take place:

  *************

  Adobe Bridge CS5 update 4.0.5

  One of the following has been moved or deleted incorrectly: Adobe After Effects CS5, Adobe Bridge CS5, Adobe Encore CS5, Adobe Premiere Pro CS5. Please start or reinstall applications to update the location and try again. To remove the product from the system, uninstall the product using the alias in "/ Applications/Utilities/Adobe installers.

  CS5 Adobe Extension Manager 5.0 updated

  CS5 Adobe Extension Manager has been moved or deleted incorrectly. Please start or reinstall the application to update the location and try again. To remove the product from the system, uninstall the product using the alias in "/ Applications/Utilities/Adobe installers.

  **************

  This error seems pretty simple, but even after (successfully), re - run every executable that I can find in all files of Adobe (including, of course, those indicated in the error message), the update still not beyond this point.  I don't want to "Reinstall" these apps and make a mess on my Apps folder.  Is there another way to fix this problem?

  Thank you for your time,

  G.

  Hello glashoppah, the products are not designed to be moved outside the installation folder once they have been installed.  To install the products in a different folder, you need to move the folders back, uninstall the product and install again by selecting the new installation folder.  There are files of data that are used during the use of products that were not intended to have the product to move.  As you've seen with updates of the product will be error.

  Please let us know if you need additional help to resolve this problem.

  David

• where can I get the software for oracle database 11g RAC installion

  pls can someone tell me where to download the installation software for oracle database 11g RAC with Yes which has the option of installing RAC database on, I the installation of database 11g software, but it does not include the installation of database RAC inside option, I heard someone say that the installer of oracle database 11g in oracle's Web site is not used to install a RAC database is it true? If that's how to make one that installs the RAC DATABASE.

  Download page:
  http://www.Oracle.com/technology/software/products/database/Oracle11g/111060_linuxsoft.html

  -Oracle Database 11 g Release 1 (11.1.0.6.0) for Linux x 86
  linux_11gR1_database_1013.zip (1,844,527,800 bytes) (cksum - 1044354138)

  -Oracle Clusterware 11 g Release 1 (11.1.0.6.0) for Linux x 86
  linux_x86_11gR1_clusterware.zip (244,660,141 bytes) (cksum - 820583335)

  Maybe you need to download is: Clusterware Oracle 11 g

  Document: Oracle® database 2 day + Real Application Clusters guide 11 g Release 1 (11.1)
  http://download.Oracle.com/docs/CD/B28359_01/RAC.111/b28252/TOC.htm

• I can't update the software on my iPad iOS version 10.0.2 it repeat to myself that my 9.3.5 version is the latest update available...

  I can't update my iPad iOS 10.0.2 it repeat to myself that my current version 9.3.5 is the most recent available.  How can I update my iPad? When I have it plugged into my laptop it also says that my iPad is up-to-date.

  A first generation iPad mini is not powerful enough to run iOS 10; they require an A6 or better CPU.

  (144965)

• Where can I download the software for the driver blue tooth mikomi

  software for mikomi driver bd - oi

  Hello

  I suggest you contact the manufacturer of the device for the Bluetooth driver.

• How can I update the driver for the webcam running Windows 98 > vista windows?

  Hello

  How could I go to get a driver who runs a
  Home QuickCam vs Webcam on my Windows Vista computer? I found the webcam in an old car for scrap, but the software is not compatible with my Vista. Pleassssse! help > I been up all night looking for the web and gettn dressing!  Thank you, Faye

  Get the manufacturer, the brand and model of the Webcam and go to the manufacturer's technical support group and see if they have Vista drivers available for download.  If they do not exist, I'm afraid you're out of luck. If available, download and install and you should be running.  But you should contact the manufacturer.  Given the age, it is very likely that there's no Vista drivers for this device.  There is no realistic way to do your own drivers, unless you are a developer of professional pilot (and even then, it would be not possible).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.