I can't use of Youtube, how can I remedy this situation?

Similar Questions

• Some web pages do not show picture how can I remedy this situation?

  for some photos of the reason that when there are long, is not visible are not more visible I have short windowns 7 with internet explorer 9 my virus checker is avg

  plase Advisor

  Hello

  Did you the latest changes on the computer before this problem?
   
  Read the article for help.
  
  Images are not displayed and a red X may appear on Web sites in Internet Explorer
  http://support.Microsoft.com/kb/283807
  Note: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
  Let us know the status of the issue.

• When you type, the cursor jumps around. How can I correct this situation?

  When you type, the cursor jumps around.  How can I correct this situation?

  It is a very common problem when users become familiar with a new laptop. Either your palm/wrist/cuff/bracelet is touching the touchpad as you type or the touch pad sensitivity is set too high and reacts to strong strikes.
  • Someone to watch you while you type to see if you accidentally touch touchpad of the notebook.
  • Go to the control panel mouse configuration and reduce the sensitivity of the touchpad.
  • Make sure you use the latest version of the driver from the manufacturer of the laptop for the touchpad and update if a new becomes available.
  • Disable the touchpad entirely in favor of a wireless laptop mouse.
  As noted previously, this is a very common problem and users are usually completely unaware they do even when it is pointed out to them.

• 8 updates failed due to the error (U44M1P7). How can I correct this situation?

  I just installed the new free app cloud Creative Suite Master CS6 on my Mac (version 10.8.4) with Intel Core i7 3.4 GHz and 24 GB of memory. The cloud installation went well. However, the cloud has 8 updates all failled because of an error "errors encountered during installation. (U44M1P7) »

  How can I correct this situation?

  You can try the solutions in the following two knowledge base article:

  http://helpx.Adobe.com/Creative-Suite/KB/error-u44m1p7-installing-updates-CCM.html

  http://helpx.Adobe.com/Photoshop/KB/Photoshop-CS6-updates-Don ' t - install.html

• I have iPad Air and have never used my application pages. He now does not turn on and just displays "pending". The application does not open and I would like to download an application on pages to activate my use. How can I correct this situation, please?

  I have an iPad Air and have never used the app to Pages. For some time, it has not been enlightened and shows 'pending', but does not open. Now I want to resolve this situation. Any ideas, please

  Hello. It seems to be hung trying to complete the installation. You can try to remove and reinstall. To remove it, go to settings > general > storage > storage management. Expect that the apps fill, then on the Pages. You will see the used storage and a delete option. It allows to remove the existing copy. Then go to the app store, in respect of the purchase, you will see the Pages with a cloud beside her. Tap on the cloud and it should install again.

• When I start my computer, it makes a very loud beep, how can I remedy this?

  WHEN I START MY COMPUTER, IT FACT BEEP LOUDLY, HOW CAN I REMEDY?

  Hello

  Sound beeps are error codes that describe a problem with your machine. One
  continuous beep may mean keyboard (loose or bad cable), losing the card, power, shorts or
  Another problem according to the system/BIOS manufacturer. Other models of beep have other meanings
  According to the manufacturer of the BIOS.

  Startup and select CONFIGURATION/SETTINGS (BIOS/CMOS) - F2 you start - look like usually
  for the creator of the BIOS then see here:

  Computer MESSAGE / beep codes
  http://www.computerhope.com/beep.htm

  If my computer beeps and won't start, what do the beeps mean?
  http://KB.IU.edu/data/afzy.html how to troubleshoot Beep Codes
  http://pcsupport.about.com/od/nonworkingcomponent/HT/beepcodestb.htm

  POSTAL Codes beep
  http://www.technick.NET/public/code/cp_dpage.php?aiocp_dp=guide_beep_codes

  Power on Beep Codes post
  http://www.pchell.com/hardware/beepcodes.shtml

  It may have other check so with system Maker or motherboard for custom manufacturer
  systems.
  
  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Is no longer, I can get my regular Hotmail. How can I correct this situation, because I have important emails in this account?

  Window live hotmail sign when only happens on my computer. However, I have to get in my old e-mail account with hotmail. How can I solve this problem? Send message to * address email is removed from the privacy *.

  Thank you

  Janice

  Hello

  for any hotmail questions please repost via hotmail portal in the link below

  http://www.windowslivehelp.com/product.aspx?ProductID=1

  Consult with Microsoft Certified Solutions
  How to work the views Active Hotmail?

  What to do if you can't connect to Windows Live Hotmail

  Your account has been temporarily blocked

  Compromised account - unauthorized account access

  Reset your password

  Error when you try to send an e-mail: your message seems to have triggered our spam filters.

  Close your Hotmail account

• In Lightroom Creative cloud 2015 - my Radial filters and Gradient are broken and not operating correctly. How can I remedy this?

  I use Lightroom CC 2015 - I just upgraded to version LR ^ and everything worked WONDERFULLY, but last week my gradient and radial filter stopped working correctly, and I'm not sure how to fix this? For example when I click on them to use them, on the gradient filter I don't get the 'line' to 'stretch' (or 'circle' for the Radial filter) in all of my photo? If I select the checkbox at the bottom, to show the hidden region sometimes I see a hidden ares, sbut mostly not.

  I'm not sure how to fix this?  Can anyone help? Please?

  These are my tools 2 FAVORITES in the develop Module.  Maybe I was wearing the overuse? Laughing out loud!  This is how much I love them.

  Thank you!!!

  Julie

  Press H to see what you're doing and O to see the overlay.

• Where multiple lexcial settings (how can I handle this situation?)

  Hi, I'm new to reports someone can help me solve my problem, how do I use several lexical parameters for the WHERE clause, I use OE schema example (Order Entry)
  
  The user's settings
  EID_FROM
  EID_TO
  EID_WHERE_CLAUSE
  SAL_FROM
  SAL_TO
  SAL_WHERE_CLAUSE
  
  QUERY
  Select EMPLOYEE_ID, FIRST_NAME, LAST_NAME, HIRE_DATE, SALARY, MANAGER_ID, department_id
  employees
  & EID_WHERE_CLAUSE & Sal_where_clause
  
  AFTER THE PARAMETER OF
  function boolean return AfterPForm is
  Start
  
  If: EID_FROM is null or: EID_TO is NULL
  then: EID_WHERE_CLAUSE: = 'WHERE 1 = 1';
  ON THE OTHER
  : EID_WHERE_CLAUSE: = 'WHERE EMPLOYEE_ID BETWEEN' | : EID_FROM | ' AND ' | : EID_TO;
  END IF;
  
  If: SAL_FROM is null or: sal_to is Null
  then: SAL_WHERE_CLAUSE: = 'WHERE 1 = 1';
  ON THE OTHER
  : SAL_WHERE_CLAUSE: =' AND WAGES BETWEEN ' | : SAL_FROM | ' AND ' | : SAL_TO;
  END IF;
  
  return (TRUE);
  end;

  Hi you
  1. no need to put WHERE 1 = 1 in PL/SQL, place it in your main query like this data block

  QUERY
  Select EMPLOYEE_ID, FIRST_NAME, LAST_NAME, HIRE_DATE, SALARY, MANAGER_ID, department_id
  employees
  where 1 = 1
  & WHERE_CLAUSE

  2 no need to place user settings between sign of tip, report it just replace your clause '&' with the string that you placed in the PL/SQL block, see below.
  3 and that the other guy says that you can combine the two if you wish.

  If: EID_FROM is NOT NULL or: EID_TO is NOT NULL
  : WHERE_CLAUSE: = ' AND BETWEEN EMPLOYEE_ID: EID_FROM AND: EID_TO;
  END IF;

  If: SAL_FROM is NOT Null or: sal_to is NOT Null
  : WHERE_CLAUSE: =: WHERE_CLAUSE | "AND PAY BETWEEN: SAL_FROM AND: SAL_TO;
  END IF;

  Kind regards
  Syed Khawar

• How can I correct this situation with vista? __

  my computer crashed in February. I had to install another hard drive. now I can not download anything to my comp. It won't let me download microsoft works or adobe reader. actually do anything. He said I downloaded adobe flash player, but it does not work. an error is 80080005 constantly. don't know what to do. Help, please...

  0 x 80080005 implies that Microsoft Installer is not configured correctly or it may have malfunctioned.

  "

  Run the Startup Repair tool by using the Windows Vista installation disc

  1. Insert the installation disc.
  Note: The computer must be configured to start from a CD or a DVD. For more information on the configuration of the computer to start from a CD or a DVD, see the documentation provided with your computer.

  2 restart the computer. To do this, click Start, click the arrow next to the lock button, and then click restart.
  Note: If you cannot restart the computer by using this method, use the power button to turn off the computer. Then, turn the computer back on.

  3. set your preferred language and then click Next.
  Note: In most cases, the Startup Repair process starts automatically, and you do not have to select in the System Recovery Options menu.

  4. click on repair your computer.

  5. in the System Recovery Options dialog box, click the operating system you want to repair, and then click Next.

  6. in the System Recovery Options menu, click Startup Repair to start the repair process.

  7. when the repair process is complete, click Finish.

  To run the Startup Repair tool if the computer has preinstalled recovery options

  Note: In most cases, the Startup Repair process starts automatically. Follow these steps only if the Startup Repair tool does not start automatically.

  8. remove all floppy disks, CDs and DVDs from the computer and restart the computer.

  9. follow one of these steps:

  (a) if the computer has a single operating system installed, press and hold the F8 key in restarting the computer. You must press the F8 key before the Windows logo appears. If the Windows logo appears, you must restart and try again.

  (b) if the computer has more than one operating system, use the arrow keys to select the operating system you want to repair. Then, press and hold F8.

  10. in the Advanced Startup Options, use the arrow keys to select repair your computerand press ENTER.

  11. click on a layout of keyboard in the list and then click Next.

  12. click on a user name in the list, enter the password and then click OK.

  13. in the System Recovery Options menu, click Startup Repair.

  14. when the repair process is completed, click Finish. "

  TaurArian [MVP] 2005-2010 - Update Services

• My swap file corrupts always after reboot. How can I remedy this?

  I have Windows 7 Ultimate 64 - bit Edition with Service Pack 1, all the updates that are installed. For some strange reason, my pagefile always corrupts after restarting the computer and when I start Windows I always get Symptoms "low virtual memory". When I go to system preferences > advanced > Performance, the size of total paging for all readers file is empty and when I opened to change virtual memory settings, no paging file is enabled for my drive.

  I tried to boot into the recovery environment, unlocked my Bitlocker drive using my recovery key and by using the following commands:

  attrib - r - a s h c:\pagefile.sys

  del c:\pagefile.sys

  I also made sure using regedit in recovery mode there is no TempPageFiles value.

  System Restore is disabled, and I don't want to do a complete reinstall.

  I was able to boot into Windows without any problems whatsoever, but this only provides temporary relief from the problem. I have not anything with the installed AFS driver, so if someone could help me to get permanent relief from virtual memory issues, that would be greatly appreciated.

  Dear Jan:

  Thank you very much for your answer. However, the display on the AFS driver that you can join in the links in the post you want to go to is not relevant to my situation. However, I found a post online via the Google search engine not great and wonderful in which only you have to do to the deactivation of the attributes on the pagefile.sys file, but you must also make a few changes to the permissions of this file too. When I restarted the computer after that I left the repair mode and I allowed my computer to start, and recreate the paging file, the problem seems to have disappeared as I have not experienced the symptoms of lack of memory. I also disabled pagefile encryption on my volume of operating system that I didn't need it because I use Bitlocker. It could have been a screw-up permissions when I tried to do something or the encryption of redundant and useless file on my computer supposedly corrupted the pagefile that she tried to develop and foster growth.

  Therefore, the problem seems to be resolved, and I wish you a wonderful day.

  Sincerely,

  Nathan Koepke

• Windows Media Player cannot play the file because the required video codec is not installed on your computer. How can I correct this situation?

  It recently advised me to switch to Firefox.

  Hello

  Please find the supprotURL:

  http://support.Microsoft.com/kb/926373

  Windows 7 and WMP 12 don't play many types of files in the box, you need additional configuration. :(

  Attention if you got this message to a folder ".wmv", which should impose no extra codec (coder-decoder), this type of codec will probably install viruses on your computer. You can see the file extension in Windows Explorer or in the name of the file if you have configured via the "Tools |" Folder options | View menu"to do so, or in the Details view, the 'Type' column should display something like"File WMV", or in this case,"the Windows Media audio/video file.

  If it's a real file, for example a Flash (".flv"), ".mkv" file or a DVD Blu - Ray, you have to play on a third party such as VLC Player, or download the appropriate codec. There are a bunch of them packed in a secure facility on shark007 (dot) net and the Blu - Ray, probably your computer comes with a DVD playing software that should do the trick, although the codec that comes with it is not compatible with WMP.

• I can't sign in on my Mac Pro 2009 iMessage. Any advice on how to remedy this situation would be appreciated.

  When you try to connect, I get the following error message.

  

  I am connected to internet via ethernet. I tried to connect via WiFi as well with no luck. Any other access to the internet is very good as are the connections. In addition, I tried to disconnect from iCloud and then signed in, booted in safe mode and finally reinstalled El Capitan with no luck. My Mac Pro is an early 2009, 8 core 2.66 GHz with 32 GB of RAM. My boot drive is an Accelsior E2 480 GB SSD. The current version of the operating system is 10.11.1.

  Any suggestions on how to address this problem would be greatly appreciated.

  Thank you.

  Have you tried:

  Get the help you accessing Messages, FaceTime, and Game Center

• Dell cares - can you fix this Situation?

  DellCares - February 27, I worked with a Dell representative via chat and asked for their help in buying a lock for my new Dell laptop.  They provided the part number and the link to the lock that said would work, so I ordered delivery the next day. I got the lock 2 March 2015. It did not fit my Dell laptop.

  I have notified the Dell Support via chat March 2 and reported the problem. They provided me with what should have been the lock correct room and told me I had to contact Dell back... but they were closed.  So I went on my business trip (without a work laptop lock I sent the next day).

  When I returned and called Dell returns March 30, I was told that they would not throw me a refund. They have categorically and repeatedly told me that I had passed the 30 day window and there was nothing they could do.  I pointed out that the mistake was theirs and that I had contacted the same day I received the lock and reported the problem.  Not to mention that my subsequent follow-up call was still only 28 days after I got bad locking. They said sorry, they can't help me.

  I asked to speak to someone else, I'm sure that Dell would not treat a paying customer who had harmed like this.  I was told there was no one to talk with and without other channels.  The advice that they gave me were to check eBay and see if I can find a lock which fits for cheap.

  That seems like a fair answer, or even a good way to do business?  I hope that your answer is no.  The crazy is I wasn't even asking for my money back - I wanted to just swap it for the locking system that actually works!  Is - this unreasonable? Can Dell, you please help to solve this problem?

  I work for a digital marketing agency and have eaten a lot of flight of my brothers IT recently to have bought a new Dell laptop (which had problems with touch-screen / keyboard - but that's for another post).  They warned me of Dell customer service.  I want to prove them wrong, so can you please please please just share this laptop lock for the one I was supposed to get?  I prefer not to hunt Dell everywhere in social media to try to fix this error.

  Thanks for your help.

  Hi Yosef90,

  Thanks for your post!

  I apologize for the situation that you have lived, and I hope that I might be able to help you.  Please contact me privately and provide your personal information, and I'll see what we can do.  Thank you.

  Kind regards

  Robert

• When sending long E-mail, top bar containing the Send button will view, how to send in this situation?

  During long typing NEW e-mail, the text develops the window moves to the top and the button SEND disappears under a different toolbar at the top of the screen. How can I send an e-mail when the SEND button is not accessible? I can't pull the window and send button area down enough to allow the cursor to activate.

  There are different ways to do... The simplest is to click with the right button on the element (I think you said a toolbar at the top of the screen) which covers the button send, select 'Inspect element' or press 'Q', then click on the arrow down next to the element name and choosing 'Remove the node', then the toolbar disappeared , and you may see the submit now button.

  Another way is JavaScript... which is a little hard