I cancelled the update of Windows Vista Service Pack 2 (KB948465) and now I can't get it to download?

Similar Questions

• Update for Windows Vista Service Pack 2 (KB948465) repeatedly fails - error Code 80246007

  Update for Windows Vista Service Pack 2 (KB948465) repeatedly - fails error Code 80246007.  BITS ok - Microsoft 'Fix' detected 'problems' and 'fixed '.

  them, but the update continues to fail.  Any help would be appreciated.

  Hello

  Perform the steps from the link below and see if it helps.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  Hope this information helps.

• Windows Update of Windows Vista Service Pack 2 (KB948465)

  After installing Windows Update Windows Vista Service Pack 2 (KB948465) my computer slowed down and
  I was not able to connect to my hotmail account.

  I uninstalled, or rather I went the restore point on my computer and uninstalled it.

  Why Microsoft comes up with these updates?  Very often, these mess my computer updates.

  Sincerely,

  Lucienne

  Never, EVER use system restore to 'Cancel' an update, Service Pack, or upgrade of IE!  Instead, uninstall the update, Service Pack, or the IE patch & reboot.  If that does not resolve the problem, then try System Restore.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I can't install the update for Windows Vista Service Pack 1 (KB936330). I get error code 800F081F & dt000.

  I tried to solve this problem, almost every day since the 01/08/2012 a period of 3 to 7 hrs @ a time, following troubleshooting instructions everything including the fix It Center without success. I even tried to do it manually.  I need a disk to achieve? Please give me detailed instructions thoroughly. Is this a common problem with Windows Vista.

  What are error codes: 800F081F & dt000

  Hello

  1. have you made changes on the computer recently?

  2 is the issue specific to this update?

  3. are you able to install other updates successfully?

  4. What is the brand and model of the computer?

  5 all the troubleshooting steps you have done?

  Try these steps and let me know the status.

  Method 1.

  I suggest you follow the steps in this article.

  Problems with the installation of the updates: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-with-installing-updates

  Method 2.

  Clean boot : Try to set up your computer in a clean boot state and check if you are able to install the update. Tuning your system to start in mode minimum state helps to identify third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Disable Firewall: turn enable or disable Windows Firewall: http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Note:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you need to disable temporarily to install other software, you must activate it as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3.

  Learn how to install Windows Vista Service Pack 1 (SP1): http://windows.microsoft.com/en-us/windows-vista/Learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate. The virus scanner is provided so that the computer is virus-free before you start to install the updates.

  Method 4.

  The system update tool scans inconsistencies in the computer where it is installed. It usually takes less than 15 minutes to run the scan. However, the tool might take much longer on some computers. Although the progress bar seems to stop, the analysis is still running and you should not cancel the update.

  The system tool that corrects problems with Windows Update is available for Windows 7, Windows Vista: http://support.microsoft.com/kb/947821

  For reference:

  Windows Update 800F081F: http://social.technet.microsoft.com/Forums/en-US/itprovistasetup/thread/2cf14002-250f-4cd3-baab-185b13d1e501/

  I hope this helps.

• Way around being hung to one outlet during the update of Windows Vista Service Pack 2?

  I have a problem, I have a laptop Toshiba where AC internal adapter is broken, it has been for some time - but my buddy has also a Toshiba laptop computer, where I can just return for batteries between the two and this system has worked fine just now, the problem - I could do my Windows updates business as usual until Service Pack 2 for Vista, it will not allow the installation of the update because my laptop is on battery.  Is there a way to get around this?  I have of course no way to connect to food unless it is repaired, and at this point I just prefer to get a new laptop that money put into this one - I'm hoping somewhere someone has suggestions! :(  Help!  Thank you!

  Hello Victoria MariaElena.

  Unfortunately, there is not another way. Your laptop must be powered by the sector during the update to avoid the laptop shut down due to lack of battery power.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer:www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• try to install the update for windows Vista service pack 2.

  install the drop-outs, citing error code 80070490. What should I do now?

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997

  System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008
  http://support.Microsoft.com/kb/947821

  0 x 80070490

  ERROR_NOT_FOUND

  Windows could not search for new updates.

  However, a repair (AKA In-Place Upgrade) installation will be not solve the problem if it is due to a hijackware infection.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

• Impossible to solve the problem of Windows Vista Service Pack 2 update! (error code 80073712)

  original title: could not resolve the problem of Windows Vista Service Pack 2 update!

  Hey there,

  I got Windows Vista Home Premium Service Pack 1 in my laptop when I bought it. Recently there was no updates of security (e.g., KB2481109) to install it into my system with a error: 80073712 and I had received a notification from windows to install Windows Vista Service Pack 2update. I tried to install it from windows update, but I got the error: 8024200d. I read the solution on this site and followed by download the stand-alone file and install "System Update Readiness Tool" (KB947821). ". After that I downloaded the standalone version "Windows Vista Service Pack 2" (KB948465) and tried to install it, but I got the error: 800f081f. "» I did Scan SFC which there is "no question of integrity" in the system, uninstalled "Avira Antivirus software" and again tried to install Service Pack 2 , but again, I've got the error: 80073712 After all this I couldn't solve the problem. Please provide some tips if anyone has solved the same or has a solution!

  Thank you very much

  UD

  Hi Electrocuteud,

  You have access to a Windows Vista installation disc? If so, follow the steps in this document to perform an InPlace upgrade. This will reinstall Vista without making any changes to the files and programs on the computer. Even if your data and programs must be safe, it is always advisable to make sure that you have a recent backup before major changes on the computer.

• Windows Vista Service Pack 2 (KB948465) I get the error code 80092004 and it was not able to load.

  Windows Vista Service Pack 2 (KB948465) I get the error code 80092004 and it was not able to load.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Update for Windows Vista Service Pack 1 offerred repeatedly; have installed 4 times.

  Original title: vista service pack 1

  just reinstalled vista and sp1 only installs sound always on windows updates and I install it says his successful but while he appears again ive done four times now, and it is said in the history of the update I have four time but I know that its not install as its quick access

  I have will have to sp2 as well but can't get that until I get sp1

  Hi Joy,.

  Let us work together to solve this problem.

  During the installation of Windows Vista SP1, this problem occurs when a third-party application holds open a file or locks a file that the Service Pack installer should use. For example, an application third-party antivirus or antispyware may cause this problem. I suggest you temporarily uninstall any antivirus software and check if you are able to install the service pack. Please do not forget to reactivate once the process is complete.

  Method 1: Alternatively, you can reset Windows Update components.

  How to reset the Windows Update components?

  Method 2: I ask that you download and run the system update readiness tool and check if you are able to install the service pack.

  The system update tool

  Registry WARNING: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Back up the registry

  Method 3: I ask you to install Windows Vista Service Pack 1 Standalone Installer, in clean boot.

  Step 1: download Windows Vista SP1 from the link below depending on the Type of system:

  Windows Vista Service Pack 1 for Windows Vista 32-bit (size: 544,3 MB)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=f559842a-9c9b-4579-b64a-09146a0ba746&displaylang=en

  Windows Vista Service Pack 1 for Windows Vista 64-bit (size: 873,0 MB)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=86d267bd-dfcd-47cf-aa76-dc0626dcdf10&displaylang=en

  Step 2: Save the file on the computer and install it in the boot. Please refer to these steps to learn how to:

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. Here is the link for your reference perform the clean boot.

  http://support.Microsoft.com/kb/929135

   

  Note: Please see: how to reset the computer to start as usual after troubleshooting by clean boot of the KB article to start the computer in normal startup after having solved the problem.

  Please get back to us with the State of the question.

• I can't update my windows vista service pack 1, its shows a code error 8024402f, please notify

  I can't update my windows vista service pack 1, its shows a code error 8024402f, please notify

  See the following topic for your question

  http://Windows.Microsoft.com/en-IE/Windows-Vista/Windows-Update-error-80244016-8024402f-or-c80003fa >

  06/25 / 1101:33: 43 pm

• After the release of windows vista service Pack 2 and flash 10 my system continues to blue screen

  After the last update of windows vista service Pack 2 and flash 10 that my system continues to blue screen, the solution has advised windows that will fix it is to uninstall flash and reinstal, it dosent solution work any ideas? I tried to roll back to Flash 9 and it's less, but happens again... someone has any ideas?

  First, uninstall Flash to make sure that's not the problem.  If the problem persists and if the problem is related to the installation of Vista SP2 (as seems to be the case), then Support Microsoft offers free technical support for installation of Vista SP2 issues at: https://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034&st=1&wfxredirect=1&sd=gn.  They are experts on these issues and you should take advantage of the offer, although it is still free.  I'm sure they will be able to help you.  Minimize (but do not deny) the update of Flash and to focus on the installation of SP2 when you explain the problem.

  I hope this helps.  If this isn't the case, after return and we'll see what we can do.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Vista Service Pack 2 (KB948465) not __will not install - constant judgment of Internet Explorer

  I couldn't after several attempts to install Windows Vista Service Pack 2 (KB948465).  I finished all of the instructions that will appear on the screen to fix this problem and nothing works.  I'm not a PC geek and want just to get this update loaded.  I hope that this will solve the constant stop my IE WHENEVER I use it.  I'm at a point where I want to just remove Vista and go back to XP.  I NEVER had a problem with it.

  Please contact something that can do a non-techie.  I look at all these forums, but I don't really know how to do all this.  So, unless there are instructions step by step, I'm a lost soul.

  Thank you

  Scappi

  Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself.

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1B. download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) via Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step # 1 above and select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  5. right-click on the file that you saved in step # 1 b above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then reboot again.

  6. do a clean install of Norton Internet Security 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.
  
  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  10. restart once again & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• error imstaling windows vista service pack 2 (kb948465)

  I get an error editing Windows windows vista service pack 2 (kb948465). I already deleted the cookies and the trash is empty. What other shoulod I try?

  Hello

  It took the exact error message to help you properly.

  This is the information I give normally when posters have problems with the installation of Service Packs.

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon.

• Requests indicates Vista Service Pack 2 installed, install Windows Vista Service Pack 2 (KB948465) new

  Vista Service Pack 2 indicates properly installed, but updates important update for installation: Windows Vista Service Pack 2 (KB948465)

  Download size: 6.0 MB.  How can I get rid of request to install?  Service Pack 2 installation is performed again, but it remains as update to install.

  Sometimes, when an update is installed and appears again it's because a file is missing.

  You must download it once more and if it shows up again open Windows Update, right click and select Hide update.

• When I try to reboot my laptop (toshiba Windows Vista) displays a black screen and now I can not it reboot. It says bootmgr missing. What should I do to restart?

  Can someone help me please! When I try to reboot my laptop (toshiba Windows Vista) displays a black screen and now I can not restart. It says systeminst9.wnm is missing. What should I do I restart yo?

  Hi Ashutosh,

   
  You did changes to the computer before the show?
   
  This error indicates that the boot sector is corrupted or missing.
   
  I suggest for the link and follow the steps in the article:
  Windows error message «Bootmgr is missing Press Ctrl + Alt + Delete to restart»
  http://support.Microsoft.com/kb/2622803
   
  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
   
  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.