I cannot access the C: drive, Security Center blocks almost all executions, it allows me to access permisions

Title says it all. I get errors saying C: / then file is inaccessible. I don't have the necessary administrator permissions, if I click on anything with the security shield, it does nothing. Help, please.

[Transferred from Internet Explorer]

Title says it all. I get errors saying C: / then file is inaccessible. I don't have the necessary administrator permissions, if I click on anything with the security shield, it does nothing. Help, please.

[Transferred from Internet Explorer]

Version of Windows is different, but the problem is the same... Follow the troubleshooting steps in the links below and update the thread if you can fix it

http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/unintentionally-removed-ReadWrite-permission-on-c/ffcc1dde-e68d-40db-A00C-6e82d1133e93

http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/c-is-not-accessible-access-is-denied/b8a0fa0f-DC68-4455-928c-97a225215071

Tags: Windows

Similar Questions

  • Windows could not start the service on the Local Computer Security Center. Error 1068: The dependency service or group could not start

    I use Windows 7 Home Premium
    My windows Security Center cannot be started. I spent to the Microsoft Management Console and tried to launch security through Services Center, but when I do I get the following message is displayed:
    "Windows failed to start the service on the Local Computer Security Center.
    "Error 1068: the dependency service or group could not start"
    Help, please.
    Thank you.

    Hi Rohit Chettri ,

    (I am not good in English)
    I am trying no operation troubleshooting you mentioned. I have it set for myself.
    I clicked on something related to the denfence in the heart of the action and when I restarted my computer is off almost all services. I couldn't even connect to the internet
    I went to the Configuration System (msconfig)-> services-> active tab all services and restart. After that my computer works normally.
    In any case thanks a lot Rohit Chettri.

  • Cannot load the class driver: com.mysql.jdbc.Driver

    Hello

    I am new to Oracle solutions and I am trying to deploy a simple ADF Application that retrieves data from a mysql database, I already set up the mysql connector in libraries, but when I try to deploy the application, the following message appears for me:


    Using the 7101 port *.
    C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\bin\startWebLogic.cmd
    [waiting for the server to complete its initialization...]
    .
    .
    Arguments of memory in JAVA: - Xms256m-Xmx512m - XX: CompileThreshold = 8000 - XX: PermSize = 128 m - XX: MaxPermSize = 512 m
    .
    Start mode of WLS = development
    .
    CLASSPATH=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar; C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar; C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar; C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar; C:\Oracle\MIDDLE~1\modules\features\weblogic. Server.modules_10.3.5.0.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar; C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/Ant-all.jar; C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/Ant-contrib.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar
    .
    Path = C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\native; C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin; C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\Bin; C:\Oracle\MIDDLE~1\JDK160~1\jre\bin; C:\Oracle\MIDDLE~1\JDK160~1\Bin; C:\Program Files (x86)\SenchaSDKTools-2.0.0-beta3; C:\Windows\System32; C:\Windows; C:\Windows\System32\Wbem; C:\Windows\system32\WindowsPowerShell\v1.0\; C:\Program Files\Intel\WiFi\bin\; C:\Program Files\Fichiers Files\Intel\WirelessCommon\. C:\Program Files (x 86) \Microsoft ASP.NET\ASP.NET Web Pages\v1.0\; C:\Program Files\Microsoft SQL Server\110\Tools\Binn\; C:\Program Files (x86)\GtkSharp\2.12\bin; C:\Program Files\Intel\WiFi\bin\; C:\Program Files\Fichiers Files\Intel\WirelessCommon\. C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
    .
    ***************************************************
    * To start WebLogic Server, use a username and *.
    * password assigned to an administrator-level user. For *.
    * server administration, using the WebLogic Server *.
    * the http://hostname:port\console console *.
    ***************************************************
    from weblogic with the Java version:
    Java version "1.6.0_24".
    Java (TM) SE Runtime Environment (build 1.6.0_24 - b50)
    Java Client VM (build 19.1 - b02, mixed mode)
    WLS starting with line:
    C:\Oracle\MIDDLE~1\JDK160~1\bin\java-client-Xms256m-Xmx512m - XX : CompileThreshold = 8000 - XX : PermSize = 128m - XX : MaxPermSize = 512m-Dweblogic.Name=DefaultServer-Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy-Djavax.net.ssl.trustStore=C:\Oracle\Middleware\wlserver_10.3\server\lib\DemoTrust.jks-Dweblogic.nodemanager.ServiceEnabled=true - Xverify : aucun-da-Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3-Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server-Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server-Djps.app.credential.overwrite.allowed=true-Dcommon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 - Djrf.version=11.1.1 - Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger-Ddomain.home=C:\Users\FBELLUCO\AppData\Roaming\JDEVEL~1\SYSTEM~1.13\DEFAUL~ 1-Djrockit.optfile=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt-Doracle.server.config.dir=C:\Users\FBELLUCO\AppData\Roaming\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1\servers\DefaultServer-Doracle.domain.config.dir=C:\Users\FBELLUCO\AppData\Roaming\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1-Digf.arisidbeans.carmlloc=C:\Users\FBELLUCO\AppData\Roaming\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1\carml-Digf.arisidstack.home=C:\Users\FBELLUCO\AppData\Roaming\ JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1\arisidprovider-Doracle.security.jps.config=C:\Users\FBELLUCO\AppData\Roaming\JDEVEL~ 1\SYSTEM~1.13\DEFAUL~1\config\fmwconfig\jps-config.xml-Doracle.deployed.app.dir=C:\Users\FBELLUCO\AppData\Roaming\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\servers\DefaultServer\tmp\_WL_user-Doracle.deployed.app.ext=\--Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1-Djava.protocol.handler.pkgs=oracle.mds.net.protocol-Dweblogic.jdbc.remoteEnabled=false-Dwsm.repository.path=C:\Users\FBELLUCO\AppData\Roaming\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\oracle\store\ GMDS-Dweblogic.management.discover=true-Dwlw.iterativeDev=-Dwlw.testConsole=-Dwlw.logErrorsToConsole=-Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sysext_manifest_classpath ; C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic. Server
    < 19/08/2012 BRT 16h40min52s > < Info > < security > < BEA-090905 > < disabling CryptoJ JCE provider auto-intégrité for better startup performance. To allow this control, enter - Dweblogic.security.allowCryptoJDefaultJCEVerification = true >
    < 19/08/2012 BRT 16h40min52s > < Info > < security > < BEA-090906 > < change the default Random Number Generator in RSA CryptoJ of ECDRBG to FIPS186PRNG. To disable this change, specify - Dweblogic.security.allowCryptoJDefaultPRNG = true >
    < 19/08/2012 BRT 16h40min53s > < Info > < WebLogicServer > < BEA-000377 > < ہ WebLogic Server Java hotspot Client VM Version 19.1 - b02 Sun Microsystems Inc. >
    < 19/08/2012 BRT 16h40min53s > < Info > < management > < BEA-141107 > < Version: WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 1398638 2011 >
    < 19/08/2012 16h40min54s BRT > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >
    < 19/08/2012 BRT 16h40min54s > < Info > < WorkManager > < BEA-002900 > < self-adjusting Initializing of thread pool >
    < 19/08/2012 16h40min54s BRT > < opinion > < LoggingService > < BEA-320400 > < C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log log file will be rotated. Reopen the log file if stopped tailings. This can happen on some platforms such as Windows. >
    < 19/08/2012 16h40min54s BRT > < opinion > < LoggingService > < BEA-320401 > < log file was shot in C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00005. Log messages will continue to be logged in C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log. >
    < 19/08/2012 16h40min54s BRT > < opinion > < Log Management > < BEA-170019 > < C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log server log file is opened. All events in the log server-side will be written to this file. >
    < 19/08/2012 16h40min57s BRT > < opinion > < security > < BEA-090082 > < security initialization using security realm myrealm. >
    < 19/08/2012 16h41min00s BRT > < opinion > < WebLogicServer > < BEA-000365 > < server changed to STANDBY status >
    < 19/08/2012 16h41min01s BRT > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >
    < MessageLocalizationHelper > < getLocalizedMessage > O recurso pacote 'oracle.jrf.i18n.MBeanMessageBundle_pt_BR' com a chave 'oracle.jrf.JRFServiceMBean.checkIfJRFAppliedOnMutipleTargets' nao faith sown.
    < 19/08/2012 16h41min06s BRT > < opinion > < LoggingService > < BEA-320400 > < C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log log file will be rotated. Reopen the log file if stopped tailings. This can happen on some platforms such as Windows. >
    < 19/08/2012 16h41min06s BRT > < opinion > < LoggingService > < BEA-320401 > < log file was shot in C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00005. Log messages will continue to be logged in C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log. >
    < 19/08/2012 16h41min06s BRT > < opinion > < Log Management > < BEA-170027 > < server has established the connection with the Service of diagnosis level domain successfully. >
    < 19/08/2012 16h41min06s BRT > < opinion > < WebLogicServer > < BEA-000365 > < server status changed to ADMIN >
    < 19/08/2012 16h41min06s BRT > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed for RESUMING >
    < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default [11]" now listen on 0:0:0:0:0:0:0:1:7101 for iiop, t3, ldap, snmp, http protocols. >
    < 19/08/2012 16h41min07s BRT > < WARNING > < Server > < BEA-002611 > < Hostname "FBELLUCO PC", corresponds to multiple IP addresses: 192.168.2.165, fe80:0:0:0:5d2e:304 b: c1ee:fef9 12, fe80:0:0:0:140f:246e:4e4b:5580% 18%, 2001:0:4137:9e76:140f:246e:4e4b:5580 >
    < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default [10]" now listen on 127.0.0.1:7101 for iiop, t3, ldap, snmp, http protocols. >
    < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default [4]" now listen on fe80:0:0:0:140f:246e:4e4b:5580:7101 for iiop, t3, ldap, snmp, http protocols. >
    < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default [3]" now listen on fe80:0:0:0:0:5efe:c0a8:2 a 5:7101 for iiop, t3, ldap, snmp, http protocols. >
    < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "[1] by default ' is now listening on 192.168.0.135:7101 for iiop, t3, ldap, snmp, http protocols. >
    < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default" is now listening on 2001:0:4137:9e76:140f:246e:4e4b:5580:7101 for iiop, t3, ldap, snmp, http protocols. >
    < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default [6]" is now listening on fe80:0:0:0:5cee:582d:c1d2:274 d: 7101 for iiop, t3, ldap, snmp, http protocols. >
    < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default [9]" is now listening on fe80:0:0:0:5 ca 1:539 a: e6ac:87 d: 7101 for iiop, t3, ldap, snmp, http protocols. >
    < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default [7]" is now listening on fe80:0:0:0:9808:46 d 3: f632:c499:7101 for iiop, t3, ldap, snmp, http protocols. >
    < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default [8]" now listen on fe80:0:0:0:5d2e:304 b: c1ee:fef9:7101 for iiop, t3, ldap, snmp, http protocols. >
    < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < channel 'by default [5]' now listen on fe80:0:0:0:5d5a:6be2:c66e:a30e:7101 for iiop, t3, ldap, snmp, http protocols. >
    < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default [2]" is now listening on 192.168.2.165:7101 for iiop, t3, ldap, snmp, http protocols. >
    < 19/08/2012 16h41min07s BRT > < opinion > < WebLogicServer > < BEA-000331 > < started WebLogic Admin Server "DefaultServer" domain "DefaultDomain" running in development Mode >
    < 19/08/2012 16h41min07s BRT > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed in the RACE >
    < 19/08/2012 16h41min07s BRT > < opinion > < WebLogicServer > < BEA-000360 > < server started operation >
    IntegratedWebLogicServer start time: 16364 ms.
    IntegratedWebLogicServer has begun.
    [Run application on Server Instance IntegratedWebLogicServer ASSANE...]
    [16: 41:08]-deployment began. ----
    [16: 41:08] the target platform's (Weblogic 10.3).
    [16: 41:09] recovery of the existing application information
    [16: 41:09] analysis of the dependence running...
    [16: 41:09] deployment 2 profiles...
    [16: 41:10] wrote on the Web for C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\o.j2ee\drs\IBTI\ViewControllerWebApp.war application Module
    [16: 41:10] wrote the Module Enterprise Application to C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\o.j2ee\drs\IBTI
    [16: 41:10] Application deployment...
    < 19/08/2012 16h41min11s BRT > < WARNING > < J2EE > < BEA-160195 > < application version of the lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored, because the ASSANE application is not versioned. >
    < 19/08/2012 16h41min11s BRT > < error > < hats > < BEA-149265 > < error has occurred in the execution of the request for deployment with the ID ' 1345405270810 'for task ' 0'. Error: ' weblogic.application.ModuleException: '
    weblogic.application.ModuleException:
    at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:302)
    at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
    to weblogic.application.internal.flow.DeploymentCallbackFlow$ 1.next(DeploymentCallbackFlow.java:517)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
    at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)
    Truncated. check the log file full stacktrace
    Caused by: weblogic.common.resourcepool.ResourceSystemException: cannot load the class driver: com.mysql.jdbc.Driver
    at weblogic.jdbc.common.internal.JDBCUtil.parseException(JDBCUtil.java:301)
    at weblogic.jdbc.common.internal.ConnectionEnvFactory.loadDriver(ConnectionEnvFactory.java:75)
    to weblogic.jdbc.common.internal.ConnectionEnvFactory. < init > (ConnectionEnvFactory.java:131)
    at weblogic.jdbc.common.internal.ConnectionPool.initPooledResourceFactory(ConnectionPool.java:712)
    at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.java:235)
    Truncated. check the log file full stacktrace
    >
    < 19/08/2012 16h41min11s BRT > < WARNING > < hats > < BEA-149004 > < failures have been detected all introducing deploy application task "ASSANE. >
    < 19/08/2012 16h41min11s BRT > < WARNING > < hats > < BEA-149078 > < message 149004 track battery
    weblogic.application.ModuleException:
    at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:302)
    at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
    to weblogic.application.internal.flow.DeploymentCallbackFlow$ 1.next(DeploymentCallbackFlow.java:517)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
    at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)
    Truncated. check the log file full stacktrace
    Caused by: weblogic.common.resourcepool.ResourceSystemException: cannot load the class driver: com.mysql.jdbc.Driver
    at weblogic.jdbc.common.internal.JDBCUtil.parseException(JDBCUtil.java:301)
    at weblogic.jdbc.common.internal.ConnectionEnvFactory.loadDriver(ConnectionEnvFactory.java:75)
    to weblogic.jdbc.common.internal.ConnectionEnvFactory. < init > (ConnectionEnvFactory.java:131)
    at weblogic.jdbc.common.internal.ConnectionPool.initPooledResourceFactory(ConnectionPool.java:712)
    at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.java:235)
    Truncated. check the log file full stacktrace
    >
    [16: 41:11] # incomplete deployment. ####
    [16: 41:11] remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
    # Cannot run application ASSANE due to the deployment on IntegratedWebLogicServer error.
    [Application ASSANE stopped and cancelled Server Instance IntegratedWebLogicServer]

    Thank you!

    Add
    mysql_jconnector.jar in the C:\bea\jdeveloper\\system11.1.1.5.37.60.13\DefaultDomain\lib folder

  • Epson Event Manager cannot find the scanner driver. Epson said that the event handler is a windows thing, and so is the problem.

    I installed an Epson Stylus SX215. I can print, scan and copy if I use another way, but if I want to use the event handler it says that it cannot find the scanner driver may not use the event handler at all (cannot yet open the program).
    In addition, the scan option "attached to electronic mail" does nothing either. Don't know if this is because the event handler program or because he can not see e-mail programs I have.

    Hi bdelrio,

    Thanks for posting. Try running a System File Checker to find errors.

    Click Start.
    In the search box type cmd
    In the menu start right click on cmd.exe and select Run - As-Administrator.
    In the command prompt, type "sfc/scannow".
    Allow this to fill and run. Please let us know if this corrects and error, or if it reports errors, it cannot fix.

    Thank you! Shawn - Support Engineer - MCP, MCDST
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)

    Original title: the answer useful?

    Help, please! Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)

    Hello

    Code 39 means that the driver is corrupted or missing.

    Please make all below even if you have done some before as it is often the set of operations which solves
    the question.

    Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
    Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
    This will refresh the default driver stack. Even if the reader does not appear to continue below.

    Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
    slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    --------------------------------------------------------------

    Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
    are you can reinstall the 'old'. Many use Windows default drivers however some special aura
    ones. Also check the website of the manufacturer of the car.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Cannot start windows, error, 193 Security Center service: 0xc1

    I get the message, Windows Security Center service is turn off.

    The pressing, turning on now, button, nothing happens.
    Go to services, I get the error code 193: 0xc1

    You maybe missing some services

    Run it as an administrator. Copy and paste what happens here

  • I installed the software recommended by Microsoft and my printer is not working as it says lxdncoms.exe and lxdrwbgw.exe of the printer driver have been blocked. What should I do?

    I installed the software recommended by Microsoft Security Essentials; When I tried to print instructions, I couldn't and the convenience store wrote lxdncoms.exe and lxdnwbgw.exe of the printer driver have been blocked.  How to unlock.  Computer is a Dell and printer is a Lexmark.

    Monday, October 15, 2012 05:17:39 + 0000, joyferg wrote:

    The game, October 11, 2012 20:43:14 + 0000, joyferg wrote:

    I installed the software recommended by Microsoft Security Essentials; When I tried to print instructions, I couldn't and the convenience store wrote lxdncoms.exe and lxdnwbgw.exe of the printer driver have been blocked.  How to unlock.  Computer is a Dell and printer is a Lexmark.

    What exactly is the software that you have installed?

    Ken Blake, Microsoft MVP

    The software is called RegWork.  I had to pay for it.  It is not yet enabled.  It seems to be just a type of utility to clean my system scan.  Since it was recommended by Microsoft Security Essentials, I thought it was the right thing to do.
    Should I continue to carry out this activation or should I unstall it.

    What makes you think that Microsoft Security Essentials recommended
    It? That cannot be good.

    You must uninstall it. Registry cleaning programs are all snake
    oil. The registry cleaning is not necessary and dangerous. Leave the
    Only registry and do not use any registry cleaner. Despite what a lot
    people think, and try to which suppliers of software record cleaning
    convince you to have used really doesn't hurt registry entries
    you.

    The risk of a serious problem caused by a registry cleaner by mistake
    delete an entry you need is much greater than any potential benefit
    It can have.

    Read http://www.edbott.com/weblog/archives/000643.html
    and http://aumha.net/viewtopic.php?t=28099
    and also
    http://blogs.technet.com/markrussinovich/Archive/2005/10/02/registry-junk-a-Windows-fact-of-life.aspx

    Let me stress that neither me nor anyone else who warns the
    use of registry cleaners never said that they always cause
    problems. If they have always caused problems, they would disappear from
    the market almost immediately. Many people have used a registry
    cleaner and never had a problem with it.

    The problem with a registry cleaner is that it carries with it
    the risk of a significant problem. And since there is no
    benefits of using a registry cleaner, running that risk is a very bad
    good deal.
    Ken Blake, Microsoft MVP

  • Cannot delete backup of drive C through Classics (or all) methods.

    During a recent backup on an external hard drive, Windows backup made 2 backups at the same time, apparently - one for my outside and the other (for reasons unknown) on my C drive. It took almost all of my C drive and now save (manage the backups/space) will not change in the C drive, because there is not enough available space. And I can't delete the backup of the file Explorer, either. Any suggestions?

    Windows 7 pro 64-bit.

    16 GB of ram

    Core i7 processor

    2 hard drives of 1 TB

    Hi AG. I'm just getting back to this.

    Before proceeding, I would like to assure you of something. The big issue I talk on my C drive, which appeared when I saved on an external one that is named "System Volume Information".

    I supported once again today and there is a file on my external drive called the same thing, AND the file with this name on my C drive now has the current date. Thus, a duplicate must have been done again, or the folder has been updated, or something.

    So, I really don't think that delete this folder in my C drive will make a good long term, except for release temporarily a lot of valuable space. But I learned to understand why windows backup does.

    (After) I'm saying this out, can you tell me what you do for backups? I'm guessing that you have found a much better method.

    Once again, thank you for your help!

    Delete "System Volume Information" and similar such as "recovery" should * not * be removed, removal will result in corrupted file system!

    If you have multiple user accounts you must empty the Recycle Bin for each user through normal means, and not by the appropriation of any kind. (it is the newspaper account and empty basket and run Disk Cleanup, as explained below)

    do the same for each partition and hard disk (plug in external HARD disk while disabling the Recycle Bin)

    The best method to backup your personal data is to use at least 1 external HARD drive or USB key.

    Online storage is also good but only for non-confidential data.

    Do not encrypt your external storage, sooner or later you're going to block your stuff and there is no way to go in this case.

    Backup system is good for the system recovery (backup of the system files * only * ) and they do not take too much space.

    You can reduce or configure this space in:

    Configuration\systeme control and Security\System

    Advanced system settings

    The system protection tab

    Configure button

    And

    System Restore button

    Once you set up above do a cleaning disc for each user account.

    Control of configuration\systeme and Security\Administrative tools > disk cleanup

    I lost a lot of data during the backup on laptops (portable computers die or get stolen sooner or later)

    I lost data while trying to encrypt the stuff (you lose your decryption key sooner or later)

    I lost data using a single external storage (hard drives die to the wire or getting hit by corrosion)

    I lost data while performing backups on CD/DVD (CD/DVD backup s * uks)

    Keep confidential things on HDD/USB EXTERNAL, stuff on the external storage cannot be 'hacked' as another pluged in storage devices.

    don't use programs of any kind to transfer data to external storage, use the copy and paste * manually *.

    So currently, I use 1 drive external HARD, key 2 USB and 1 card SD + online storage.

    No more problem.

    Hope that helps :)

  • How can I find the latest driver for my Canon MX310 all-in-one printer after "redevelopment" of the new Mac OS (El Capitan)?

    How can I find the latest driver for my Canon MX310 all-in-one printer after "redevelopment" of the new Mac OS (El Capitan)?

    Have you looked at the site of Canon?

  • When windows starts, the user name is not displayed, almost all programs do not work, or I get a message saying that they do not have authorization to run the service

    When windows starts the user name is not displayed, almost all programs do not work, or I get a message saying that they have permission to run the service, sometimes windows not loading some programs of initialization and I can't turn off the pc by using the start menu, when it arrives, sometimes everything works normally when I turn on the pc except of my antivirus (avast!) and firewall (comodo) , they are responsible, but avast! said that the service is disabled and when I him there is a message saying that he had ceased to maximize or in an inconsistent state and comodo said that the application of the agent is not running.

    My Windows is XP Professional SP3.

    Thanks in advance.
    (Sorry for my English)

    * original title - I have starting problems I've ever had and I can't find a TomTom.*

    Salvation exodus REV,

    You did it of any material changes or software on the computer before this problem?

    I recommend you to uninstall Avast! & Comodo temporarily from Add / Remove Programs. Later, check to see if the problem persists.

    To uninstall Avast!, you can use utility aswClear to uninstall Avast!.

    For more information, refer to this link: Uninstall Utility

    You can not install Comodo since Avast! has a built-in & antivirus firewall.

    Hope the helps of information.
    Please post back and we do know.

  • Cannot install the printer driver - error of access denied

    I have two laptops Inspiron 1545 new running Windows 7 64-bit edition that expose that same question.  I'm trying to get an Epson color Stylus 760 working with them via a USB connection.

    When I join the starting the unit is correctly recognized, but the Epson driver does not install correctly.  If I run Windows Update, the Epson driver is listed as an optional update.  If I select and run the update, it fails with 80070005 error.

    If I go into Device Manager, the printer is listed as a printer USB that does not run as properly as there is no driver.  If I choose "put updated pilot" from the Device Manager, it downloads successfully the driver (even such as mentioned in Windows Update) and when you try to install the driver it comes back with an error "access denied."

    As mentioned previously in this case with two laptops.  In both cases I was logged under an administrator account, but not "the" administrator account.  I have enabled the administrator account and tried to install it through this, but it made no difference.  I tried also to remove and reinstall the device without success.

    The Windows 7 compatibility site said that the printer is compatible with Windows 7 64 - bit edition.

    Hi Shawn,

    In my view, that there is a driver 64 bit Windows 7 according to the guidelines of this site:
    The Epson Stylus Color 760 is a 'built in the Windows 7 driver.
    Nevertheless, I will try your suggestion if Alan does not work.
    Kind regards
    Dan
  • Cannot install the update of security for the Microsoft Visual C++ 2010 Redistributable Package (KB2467173)

    I can't install the update of security for the Microsoft Visual C++ 2010 Redistributable Package (KB2467173).

    According to Microsoft Update, the error code is 0 x 643.

    I tried to install the update during a clean boot without result.

    Here is the log: https://skydrive.live.com/redir?resid=DDC6388AB2460543! 117

    Hello

    Method 1
    I suggest you to run the fixit from the following link:

    The problem with Microsoft Windows Update is not working
    http://support.Microsoft.com/mats/windows_update/

    Method 2
    I would say you can do clean boot and install the update.

    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353

    Note: Make sure that you reset the computer back to normal once the diagnosis is complete.

    Method 3
    I suggest you to download and install the update from the Download Center.

    RTM of Microsoft Visual C++ 2010 redistributable MFC security update
    http://www.Microsoft.com/en-US/Download/details.aspx?ID=21576

    Method 4
    I suggest you try the steps from the following link:

    Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
    http://support.Microsoft.com/kb/2509997

    Note:
    this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: http://support.microsoft.com/kb/322756
    Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  • Satellite M60-176: cannot install the graphics driver

    Greetings,
    I'm trying to reinstall the original driver from Toshiba site
    on a satellite M60-176 disabled ATI X 700 256 MB dedicated

    version is:
    Driver VGA (ATI M24C/M26P)
    V8.121.050322a - 021880C
    Driver VGA (ATI M24C/M26P)

    The error message occurs when I install the software: Setup copy dll, install some components and stop at the installation of the driver slide with message (translation from the french) "Setup was unable to complete the installation, try to configure your graphics card with vga standard it before running the Setup program.

    When I try to detect the card with control panel and chose the file CX_21880.inf in 2KXP_INF, the process copy the dll, but in the end complains that "a problem in installing Radeon X 700' and then the error is"ACCESS DENIED"

    I tried to follow the sequence as:
    uninstall all remove them, go in safe mode, video card (I can't put a good VGA card)

    I ' v tried a driver (Driver Cleaner pro) removal tool then restart XP and then try to reinstall the driver of toshiba original ATI: same problem

    TOSHIBA support put me to BIOS 1.60 level: same problem

    I cannot conclude that this original toshiba video driver cannot be installed on a toshiba...

    Actually I'm under standard with vga display 1152 x 864 32 bit colors with slow rendering

    I'm really ask for help, because I do not know how...
    Kind regards
    Ludovic

    Hello

    What happens if you install the operating system from the Toshiba Recovery CD?
    This CD also contains the ATI graphics driver.
    How about installation of the graphics driver on the site omegadrivers.net?

    But I must say that it is very strange question. The driver from the Toshiba site should work.

  • Cannot install the update of security KB2698365, get the error message ' set up cannot copy the file msado15.dll.

    Tried several times, if I check the update log it shows canceled, have tried to disable Norton. Tried to install it manually through the Setup Wizard.  He gets up then I get the message "set up cannot copy the file msado15.dll.

    Hello

    You did changes to the computer before the show?

    Method 1
    I suggest you to run the fixit from the following link:

    The problem with Microsoft Windows Update is not working
    http://support.Microsoft.com/mats/windows_update/

    Method 2
    I suggest you register the Msado15.dll file required.

    a. Click Start and then click Run.
    b. in the run dialog box, type the following commands in the Open box and then click OK.

    Regsvr32.exe ">"

    The> placeholder is the absolute path of the file Msado15.dll.

    The following examples show how you can specify an absolute path:

    Regsvr32.exe "C:\Program Files\Fichiers Files\system\ado\Msado15.dll"

    If the Msado15.dll file is saved successfully, you receive a message similar to the following message:

    DllRegisterServer in C:\Program Files\Common Files\system\ado\Msado15.dll successful.
    c. click OK.

    Method 3
    I suggest to perform the clean boot and then try to install the updates. Clean boot will disable all of the third-party program to ensure that all third party program is not causing the problem.

    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353

    Note: Make sure that you reset the computer back to normal once the diagnosis is complete.

    Method 4
    I would say that you can download and install the update to the clean boot from Microsoft download center.

    Update security for Windows XP (KB2698365)
    http://www.Microsoft.com/en-US/Download/details.aspx?ID=30228

  • Windows Update cannot install the update of Security No.2686509

    Windows Update has tried about 18 times to install the 2686509 update, and it does not reach every time, how can I install it

    Hi LyneDerksen,

    ·         Did you do changes on the computer before the show?

    ·         You get the error message?

    ·         You are able to install other updates successfully?

    Follow these methods.

    Method 1: Temporarily disable the security software.

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

    After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

    (a) click Start, run.

    (b) type msconfigand click OK.

    (c) the System Configuration Utility dialog box appears.

    (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

    (e) when you are prompted, click restart to restart the computer.

    Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

    http://www.Microsoft.com/downloads/en/default.aspx

    Method 4: Follow the steps in the article.

    How to reset the Windows Update components?

    You cannot install some programs or updates

Maybe you are looking for

  • Moving pictures of iCloud to rename device WD MyCould ' inches *.» * ?

    Hello everyone.  I hope someone can explain to me what is happening. I have a Mac Mini OS 10.11.4 run soft Photos with photos stored/synced on the iCloud.  My iCloud is full, but with an external device to 3 TB WD MyCloud that I could move the photos

  • Excite Pro overheating, gels, flickering screen etc

    Hi guys,. you have a lot of problems with turned pro as everyone else in the world, overheating after a few minutes of play, even the basic games, as the rocket example, Hill climb race, island etc. After a few minutes it's hard to hold the tablet in

  • DAQmx write (digital) works in mode "highlight execution", and not in normal mode

    Hello! I would like to create a simple vi (it will work as a Subvi watchdog in a project) to send TTL 5V 0V 3 seconds 3 seconds, by performing an iteration in a loop. Use a card PCI-6703 to that effect (beside that I use for the generation of analog

  • Update KB 2509503 cannot be used?

    I reiceved an update for Microsoft Office 2003 KB2509503. Then a label came up saying: the update cannot be used. What should do?

  • Printer offline States

    I have a HP Photosmart 7520, which we put in place and used only once.  Now the printer is offline and can't get online.  I tried printing hp and scan doctor however once I said I want it connected through wireless it will not go further in troublesh