I changed my motherboard and now does not start LR

Similar Questions

• I changed my motherboard and now I "did not have a genuine windows edition" - help?

  It is about the title - changed my motherboard and now my edition is 'invalid' - to add spice to the bad luck, this is the second time I have reinstall on a new Board of Directors, so ofc, my second key does not work either - is there a way to legitimize my old keys? be I'll shoot 'em and send 'em you wise email (as long as I have enough access to do it in my unregistered version of the software, to do), but in short - I got two keys to have payied a sizable amouont of money for so please fix this

  Kind regards

  Simon

  Hey Mister Paton (SIR! = o)-ty for help, seems the problem is now resolved, much appreciated and good luck

  Simon

• I changed my setting in private browsing and now does not open firefox. Any ideas?

  I changed my setting in private browsing and now does not open firefox. Any ideas?

  Never mind. After about an hour of not opening, I clicked on the icon and its opening. Maybe someone can explain that.

• -HP Mini 110-1025DX closed by itself while downloading the BIOS driver and now does not turn

  I have reintalled windows xp then download, audio driver gave error when downloading and I read on the internet that unless I have download BIOS, she held in error, so I downloaded "WinFlash for HP NetBook system BIOS - Microsoft Windows-Based" and while it was installing I did something else, and when returned, not e book had closed and now does not turn.

  the specifications are also less

  -HP Mini 110-1025DX PC
  Serial number: CNU9316D45
  Product number: VA723UA -.
  Operating system: Windows XP Home Edition (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.111025 - 1629)
  Language: English (regional setting: English)
  Manufacturer: Hewlett-Packard
  Model: HP Mini 110-1000
  BIOS: KBC Version 02.0 B
  Processor: Intel (r) CPU Atom N270 @ 1.60 GHz (2 CPUs)
  Memory: RAM 1016MB
  Page file: 514MB used, 1927 MB of available space
  Windows Dir: C:\WINDOWS
  DirectX version: DirectX 9 .0c (4.09.0000.0904)
  DX setup parameters: not found
  DxDiag Version: 5.03.2600.5512 32 bit Unicode

  What should I do?        Thank you

  It won't turn? The lights come?

  Let's first, remove the battery and unplug the power adapter and leave without electricity for a minute... then reconnect and see if it is eaten on.

• I installed Mountain Lion and now does not open Illustrator CS6. I get a message - 1712. Help?

  I installed Mountain Lion and now does not open Illustrator CS6. I get a message - 1712. Help?

  I did an uninstall and re-install but since I bought the entire suite CS6 was complicated and long. But I got through it and Illustrator now opens and works. Thanks to everyone who wrote for help.

• Update Windows xp caused my computer blue screen and now will not start.

  Update Windows xp caused my computer blue screen and now will not start.  There has been no change to my system hardware or software otherwise.  After that windows update Setup, he asked to restart the computer.  When restarted, the computer screens and past blue to the quick menu for safe mode and last known configuration to work.  None of these mode of work, not to shelter or otherwise.  The only thing that he will now implementing market is quickly flashing the blue screen and restart once again to this quick menu.

  It's really annoying because I have important files on this computer work and can't afford to get in shape!   I put my confidence in using windows and keep it updated.   During the installation of your updates, it made my system fails and does not restart.   I'll be very upset if this update of windows xp causes me to have to reformat and lose important files!

  Any advice on a solution?   I need to get this computer work as soon as POSSIBLE.

  Ben River

  I ordered the Dell XP disc and did the re-install. It works fine now. The Dell technical support had me do some updates on the web as well. I have not had problems since. What happened with the automatic updates completely wiped out my operating system. At least I don't have to buy a new computer.

  If nothing else works, try reinstalling your operating system. It worked for me.

• MacBookPro6, 2 batteries ran down to 2 mos now does not start

  15 "2011 MBP 6.2 running 10.11.3 remained out of order, disconnected for about 2 months. The battery after plugging and shows 5 lights. The MBP now does not start - no edge no screen no effects nothing.

  I have reset the SMC, took out the battery and successor, removed or put around the bars of memory without any effect.

  A bad battery will keep it to start when it is plugged? Is there anything else I should try?

  TIA,

  Bill

  What happens if you leave the battery or disconnected and try to start the machine?

  It happened sometimes with macbook air which complete draining the battery damaged map logical.

  A defective battery should not influence your machine when you hooked it up.

  I recommend you to wear to a bar of genius of apple for validation.

  See you soon!

• Updated the macbook pro of el capitan and now will not start. Instead, I get the error message "your computer restarted due to a problem". Someone at - it suggestions on how to solve this problem?

  Updated macbook pro today for the latest version of el capitan and now will not start. Instead, I get the error message "your computer restarted due to a problem". Someone at - it suggestions on how to solve this problem?

  It would be helpful to post what the screen says.

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  https://support.Apple.com/en-us/HT204904

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

• Automatic update failed, and Windows does not start

  I am running Windows 7 and it does not start. Automatic update started as soon as my computer is awakened from his sleep. It closed several programs. The update had completed 30% when he stopped to restart the computer. As windows began, I got a blue screen message telling me that it didn't start. I tried to restore the system at two different times, but both failed. I'm not sure that I can do.

  How do access you the system restore?
  If through the repair of this selection of the computer in the Safe Mode menu - have you tried to use the Safe Mode?  If so, what happened?

  While waiting for a response, please try these free diagnostics, bootable: http://www.carrona.org/initdiag.html

• My model is an integrated and I was afraid to take it apart and * it upward. I tried all the f keys, but only F2 works. It does not display my HD, and it does not start. What should do?

  Hey guys, so I have an ASUS X502C and last night, it has become very slow, that I tried to close all pages open and it started making a very loud noise. I couldn't even turn off, so I closed the lid and went to sleep. When I woke up it was still on the same screen until I tried to close it and turn it off. He went to a black screen with the back light on. My model is an integrated and I was afraid to take it apart and * it upward. I tried all the f keys, but only F2 works. It does not display my HD, and it does not start. What should do?

  Hey guys, so I have an ASUS X502C and last night, it has become very slow, I tried closing all open pages, and he started to make a very loud noise. I couldn't even turn off, so I closed the lid and went to sleep. When I woke up it was still on the same screen until I tried to close it and turn it off. He went to a black screen with the back light on. My model is an integrated and I was afraid to take it apart and * it upward. I tried all the f keys, but only F2 works. It does not display my HD, and it does not start. What should do?

  Hello

  Looks like a hardware failure.

  Try to reinstall the operating system:

  It comes to the use of the Asus restore procedure.

  http://www.ASUS.com/support/FAQ/1006133/

  See you soon.

• Recently changed my Apple ID and now does not update apps

  I know that this happens to a lot of people and I searched the forums to find someone with the same problem who received the help of the community, but I have not found the post again so I decided to make my own.

  I had to change my apple ID because I got hacked. I don't have a new brand, I changed the email of the Apple ID, I already had. Everything seems fine, except that now does not update my apps on my iPod touch. I know this is because applications are no longer associated with the correct email and this is most likely the problem, but I'm not sure how to fix it.

  I made sure that I disconnected all my accounts (Apple store/iCloud/choice of account) on all my products apple (2 pounds of Mac and iPod) and has signed all the accounts mentioned previously with new Apple ID. No progress, which makes sense because the applications are linked right old Apple ID?

  So I deleted all my apps thinking I could redownload them. But they are associated with my iCloud it seems... so I tried to disable my iCloud on the iPod so that apps would show 'get' instead of 'download' in the Apple store (basically doing my iPod are realizing that it is a new Apple ID and I want to get the apps for "the first time"), but that no longer works.

  My last attempt was to remove an application on my Macbook, in the hope that "get" appears instead of "Download", but in a way that no longer works. I even connected to my iCloud with my new apple ID and none of the apps show on my iCloud. I'm quite confused. Someone at - it insight, ideas, or suggestions on how I might remedy other that go into an Apple store or do a factory reset on the iPod? Does anyone know if the factory reset would even work?

  Thank you!

  Of the information your provided, it seems that your created a new ID ranting as update the e-mail address for the original code.

  What did you do?

  Say this, you:

  Change your Apple - Apple Support ID

• Update of Lightroom 6.5 is useless! Will not open requires permission changes and still does not start!

  Updated to 6.5 and it does not open!

  Changes in sad authorization required but when do just shows the same problem.

  Basically does Lightroom non-ouvrantes!

  No support at all on the website!

  Hi corywright,

  Please change the permissions for the sub files adobe specifically.

  1. / Library/Application Support/Adobe
  2. ~/Library/application support/Adobe

  Reference: OS X El Capitan: set permissions for items on your Mac

  If the steps above did not help, then I suggest to uninstall Lightroom 6.5, restart the machine and install Lightroom 6 and then install the updated to 6.4.

  DOWNLOAD: install Photoshop Lightroom

  Updated link: http://prodesigntools.com/swupdl/updates/oobe/aam20/mac/AdobeLightroom-6.0/6.4/setup.dmg

  Kind regards

  Mohit

• XP labors heavily and Will does not start (sometimes even in safe mode.) "And if it starts in the DM, it will freeze when I try to enter to change anything).

  I have a XP computer. During use, the power supply cord unplugged and computer is dead. When I tried to restart it, it will go to the blue screen with an error, go to the screen that asks if I want to start in safe mode. It does not start in normal mode, but it does get my wallpaper and stay there. Sometimes Windows XP screen and stay there. It really starts to make a lot of noise when one of these things happens. Don't know what to do. I have a XP OS disk Dell provided with the computer. Any ideas?

  Repair the Windows XP installation - you should have all your files intact.

  A repair install will replace the system files with the files on the XP CD used to the repair facility. It will leave your applications and settings intact, but Windows updates will have to be reapplied.

  http://michaelstevenstech.com/XPrepairinstall.htm

  Good luck.

• Error: CreateFile (C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\~e5d141.tmp I receive this error when opening certain programs that worked and now does not.)

  Original title: error: CreateFile (C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\~e5d141.tmp

  I'm getting this error when opening certain programs to work and now are not. I have studied this particular error and did not find a lot about it or how to fix it.

  I don't think it's a virus.

  I don't know what to do, I tried restores system, right click and run as administrator, I did ensure that allows the firewall thing and completely uninstall and reinstall.

  If you know a way to solve this problem it would be greatly appreciated.

  Delete all files in the temp folder and see if you still receive the error.

  Let us know if that helps.

• Windows Live Movie Maker, used to work, but now does not start

  2 months ago, I used windows live movie director very well. now, I get a message that it does not start and to check my system requirements...  I loaded all updates, check the driver, uninstalled and reinstalled, still does not, any suggestions?

  Have you tried the fix program option in uninstall a program from the control panel.

  Photo Gallery work under voltage is windows? If not,

  Windows Live Photo Gallery is not responding or does not start,

  http://support.Microsoft.com/kb/944221/en-us