I closed my laptop (Macbook pro 2012) screen with a day and immediately after 30-40 minutes his does not starts once again.
I closed my laptop (Macbook pro 2012) screen with a day and immediately after 30-40 minutes his does not starts once again.
Hello Varshil07,
Thank you for using communities of Apple Support.
If I understand your message, by updating your Mac you have forced stop, or you have closed the lid, and now it does not start. To start, I suggest that try you to start in safe mode by following the instructions below. For later use, it's a good idea to not force the computer to shut down or close the lid while it is up to date, because it can cause problems.
Choose the Apple menu > shut down.
After your Mac stops, wait 10 seconds, then press the power button.
As soon as you hear the startup tone, hold down the SHIFT key.
You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.
Release the SHIFT key when you see the gray Apple logo and progress indicator.
To exit safe mode, restart your Mac, but no press during the startup.
OS X El Capitan: start in safe mode
Have a good.
Tags: Notebooks
Similar Questions
-
not boot Vista after that computer crashed have a black screen with message operating system not found.recovery discs won't load
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
Above is the way you normally boot from the Vista recovery disks.
If you have tried to boot from the recovery without success disks, contact the manufacturer of your computer.
This isn't their recovery process, Microsoft.
See you soon,.
Mick Murphy - Microsoft partner
-
I have a MacPro version 10.10 Safari on my computer version 7.5. It will not work and can not be deleted. How can I return to a Safari for my 7.5 machine?
MacPro does not have Mac OS 7.5
-
I remove SP3 it works very well to reinstalled sp 3 and had the same problem
I remove SP3 it works very well to reinstalled sp 3 and had the same problem
IF the system has an AMD processor, see this:
Your AMD computer starts after installation of XP SP3?
Download and run the tool that is located in the "first problem, affecting computers AMD with OEM images, mainly desktop HP"section. "
MowGreen Services consumer safety update
-
Satellite Pro L300-21F does not start and the screen remains blank
L300-21F is aged 18 months, so out of warranty. When you press the power button, you can hear the fan and a "click" but the hard drive does not start and the screen remains blank. The power and the battery on the headlight LEDs, but the switch light does not work. I checked the power supply and it is 19.3V and substituted a good known. Removed the battery, tried with just the power cord and still nothing. Pressing ESC or F2 when you press the button power does not bring to the top of the screen of the bios or any other message. I have concluded there is no power the jury. A friend he had its technology take a look and he concluded Council is probably a friend.
So my questions are:
1. He's probably right?
2. is it a common problem with an easy solution?
3. what else can do before shelling out for a new Board of Directors?
4. is there a link where I can find how to disassemble the case?Any help appreciated
Hello
> 1. He's probably right?
Yes, it looks like motherboard failure
> 2. Is this a common problem with an easy solution?
If it's a motherboard problem, the whole motherboard is replaced. Quite expensive part...
> 3. What else can do before shelling out for a new Board of Directors?
I don't think you can do anything with fried mobo
> 4. Is there a link where I can find how to disassemble the case?
Take a look at the site called irisvista.com
-
Satellite Pro 4220 - update the BIOS does not start
Hello!
Please, someone tell me what is the problem with the update to v1.60 SP4220 BIOS? It does not start even do it according to instructions.
I did the following:
1 download/have unzipped the package v1.60 since the BIOS page on a non-bootable floppy disk empty
2. put the floppy in the computer
3. turn on the device with the F12 keyWith a floppy, I got the "non-system disk" error and another with a "EMBRL" error message missing. What is it, I'm not familiar with that one?
Best regards
Pete v.
Hello
Can I ask why you want to update the BIOS?
You have problems?
If the laptop works well the update of the BIOS is not necessary! My laptop is about 6 years old and I have no day BIOS!However, I think that you didn't use the right update procedure.
Please check this document before starting the BIOS update:
http://support.toshiba-tro.de/KB0/TSB4A00SD000BR01.htm -
boots of the machine to a black screen with cursor flashing by intermittently does not start.
Original title: slow start, get a black screen and a space bar flashing sometimes it starts not at all and I have to hard start loaded operating system and any backup disc
slow start, get a black screen and a space bar flashing, sometimes it does not start and I have to hard start loaded operating system and don't back up drive all ides other than buying an upgrade... Please
Hello
- What were the changes made before the issue started?
You can check this link:Computer stops responding with a black screen when you start Windows XP -
Tablet Dell coming 8 Pro does not start
Hello
The Tablet is only about a year. And I've kept it's safe and sound, no damages or drops. Nothing.
But yesterday morning when I got it, he went to sea and no matter what I do, it does not start!
I press and hold the start buttong. Nada. I even press the windows key or was desperate enough to press the volume even toggles!
I thought that maybe the load isn't enough. So I let it charge overnight. Still nothing.
He used to have a small problem before that sometimes he used to take a few minutes to actually boot (startup). But it's random and many times, it was when an update has been installed. But not always.
But this time, he stayed off the coast and after more than 24 hours, does not illuminate!
What should I do?
Thank you
I think just, I solved this problem. Make absolutely certain that you are using the supplied with your coming Pro USB wall wart, similar and ordinary phone chargers don't work reliably and sometimes not at all! There will be a sticker on the side of her windows. The Pro should need more energy than what is normally fed by normal phone chargers. I hope this helps!
Also, I think that light orange/red momentary while that push the power button is actually an indicator of battery flat (as crazy as it sounds). These types of batteries are supposed to be completely empty as it will ruin their fast enough, so they are designed to power off with a few charges left to protect themselves to be completely discharged.
-
Apple MacBook Pro 2012 does not start
2012 Apple MacBook Pro. Does not start. Just get the folder with the question mark. gives possibility to restart with the ERD, but the model doesn't have a hard drive.
Help the college student needs to access files on the hard drive for the finals.
Thank you
What happens when you start to recovery
OS X: on OS X Recovery - Apple Support
and repair/disk startup disk via disk utility which is located in the recovery of aid?
If it is repairable so reinstall OS x, as the article says
Also here is covered:
On the screens, you see when you start your Mac - Apple Support
This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.
-
Scratches on the Macbook pro retina screen.
Hello
I bought a Macbook pro 13 "in may 2015 Retina. In the last six months, I've noticed there are scratches that are developed not the screen. I do not use a cleaning on the screen lotion and dust with the brush dusting given to me by the retailer. He started with the corner of screens and finally spread on the screen.
As such, there is no difference in the resolution of the screen, but I was wondering if the surface of the screen will crumble over time. Please let me know the solution for the same thing.
Put the guard of screen help?
There's this problem:
http://www.MacRumors.com/2015/10/17/Apple-MBP-ar-coating-quality-program-stainga you.
retina of anti-reflective display on the glass screen problem
This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.
-
Save the MacBook Pro - white screen of death
My macbook pro starts, I get the ringtone to start and then the white screen of death that led to the computer to activate the walk and walk. I bring in my computer for repairs, but I am not able to save anything as none of the start up works. I can not access the disk utility, I tried! I wonder if anyone has experienced this or has any suggestions on what to do before going for repairs.
What model of MacBook Pro?
Maybe this problem
http://www.Apple.com/support/MacBookPro-videoissues/
What happens if you connect an external monitor?
-Try to reset memory NVRAM/PRAM and SMC
MacIntel: Reset of the controller (SMC) system management
https://support.Apple.com/en-us/HT201295
Subject of memory NVRAM and PRAM
This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.
-
Help of MacBook Pro 2012 JBL headphones
Hello. I just got the JBL 300 Everest helmet for my birthday a few weeks ago. I've tried everything. There is no update program to get this thing to work with my computer Mid MacBook Pro 2012. The computer is one year in July 2016. 2015 purchased. Anyway, the strange thing is, works automatic JBL with the Ipad Mini 1st gen 2012. I don't know why it will not work with the Mac (laptop)? I spent tons of money on it and do not use the headset! The bluetooth features are still available, but the connection does not work between JBL through Macbook Pro! Please help me as soon as possible!
Thank you! Jilly
Try to forget the JPB on your iPod and turn off the Bluetooth on the iPad. . It is likely that it is trying to trick on your iPod, not your Mac.
Also make sure that no other Bluetooth device is within reach.
-
How do the initialization of the new hard drive in the macbook pro 2012 model
I can't the initialization of a new WD hard drive in my macbook pro 2012.
I installed the new drive and restarted with disk Warrior
and followed the instructions to press option, command-R.
When I followed the Protocol to download a new OS, disk utility does not see the newly installed
HD, what to do?
< published by host >
Use disk utility to format drives, no Warrior drive
How to install OS X on an external drive connected to your Mac - Apple Support
Drives external Mac OS Extended format before using with Aperture - Apple Support
-
Which hard drive MacBook Pro 2012
Hello
I have Non - Retana MacBook Pro 2012, it has its default 500 GB hard drive, it is too small and too slow.
I have found that I can put a 2 TB in current housing and a second in the SuperDrive slot should I want to.
But my Question, above all, the it restrictions on the brand that I can use?
If I wanted a SSD I know not all readers of work with her because of the TRIM settings, but I still don't know what to do if I went to SSD.
Could I ask for some advice please on this please.
I have £100 to spend so I was counting on a HARD drive not SSD for the more size.
Any HDD SATA with a 2.5 form factor "will be compatible with your MBP. Here are some examples:
https://eShop.MacSales.com/shop/hard-drives/2.5-notebook/
If you are considering an SSD, I recommend OWC and Crucial as the best sources.
Ciao.
-
Retina of ordinary vs MacBook Pro 2012?
There are 2 versions of the MacBook Pro 2012, retina and retina (regular).
so my question is that is should I buy? Meet with all the reasons.thanx.
You can use the link below to compare the two models: http://www.apple.com/mac/compare/
Maybe you are looking for
-
I need to install a browser on a windows computer that has no network connection. Y at - it an available stand-alone installation package that I can transfer via a flash drive? The computer is used to test and I hate IE.
-
Firefox 22.0 hangs at startup on windows 7
Firefox has been crashing at startup for 2 weeks. In the meantime, I've uninstalled and reinstalled several times and have fully formatted my computer (for other reasons). After formatting, the problem seems to be resolved for a day and return to the
-
Program name: FirefoxVerified Publisher: Mozilla CorporationOriginal file: hard drive on this computerLocation of program: C:\Program Files (x 86) \Mozilla Firefox\firefox.exeCertificate issued to: Mozilla CorporationIssued by: Thawte Code signing CA
-
The header says it all.
-
My Compaq nx6120 currently runs XP Professional With the withdrawal of support imminent XP, can I focus on installing Windows 7, & which version should I use on this computer. I noticed there are several choice-32 or 64 bit etc. Special traps waiting