I configured my printer (envy 100 D410A) online, but I can't eprint for my printer.

Similar Questions

• ENVY 100 D410a: Printer loses connectivity after mode "Eve"

  I have 2 printers, OfficeJet 5746 and Envy 100 D410a and both meet the same problem.  They work very well, then after having been slowed, printing "printer not connected" is displayed.  I did the exercises to unplug the router, remove printers from the list, I checked the ip address and they start with 10.  I have reset the printer.  I went alone on the list of printers (envy) and the problem still persists.  Please, what can I do?

  Use the following link to create yourself a file number.
  Step 1. Open the link: http://support.hp.com/us-en/contact-hp
  Step 2. Enter the product number or select Auto detection (use officejet info)
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number
  File number and phone number are displayed.

• HP envy 100 D410a, printer

  HP envy 100 D410a, the printer screen no longer works?

  Hello Teeveeaa,

  I'm sorry to hear that your screen of the printer does not work.

  Here is a document that walks through some troubleshooting you can try.

  If these steps do not resolve the problem, you need to replace your printer.

  I hope this gets the display for you.

  Jean

• HP-Envy 100 D410a just shows (INITIALIZE) is on the screen!

  HP-Envy 100 D410a was printing then stopped. When I turned it back on, just shows the printer (INITIALIZE) is on the screen! It was after I left the power for hours. Can't do anything to the screen.  My firmware Version is: SLM1CN1039FR

  Hello

  If your printer is connected wireless, make sure temporary connect the USB device, and then follow the patch below:

  Windows:

  http://ftp.HP.com/pub/softlib/software12/COL37748/MP-92513-1/D410Envy_FWUpdate_4684_HPCOM_x86_v2.exe

  Macintosh:

  http://FTP.HP.com/pub/softlib/software12/COL37909/MP-92884-2/HP_Firmware_Updater.dmg

  Please let me know if this is useful,

  Shlomi

• HP Envy 100 D410a can't see mac apple printer so don't scan at him

  I installed the software from the disc supplied and all functions of work outside the mac function analysis. He couldn't get any computer to scan to. I use a wireless through a router connection cable Netgear WGR614. My mac is a Mac OS 10.6.6 MacBook Pro 2.4 GHz Intel Core 2 Duo 4 GB RAM.

  I followed the HP Web site suggestions and uninstalled the HP, dumped preferences software, repair disk permissions and reinstalled the correct software from the Web site. I also got an update from HP printer via the software update later and gave the mac and printer an IP address manually.

  The scan-back function found my mac but the software scan-back on the mac went into a loop, and I had to force quit. I decided to reboot the wireless router, the mac and the printer but the printer is returned to a State where he could not find the mac.

  Discussion on the HP site suggests that PCs must be set to "Enable analysis for computer" whenever they are turned on or awakened from his sleep. It notes, however, that it is not necessary for macs, that it happens automatically.

  Please can someone help? Thank you very much.

  Hi Randy.

  Thank you very much for your advice.

  I followed the road of:

  Full CV uninstall-> restart mac-> add a printer in the preferences and download the latest Apple HP drivers for 10.6-> complete HP drivers from the HP website.

  The scan for mac worked worked the first time.

  Amazing it is really as simple as the order in which the different drivers are installed. Sounds simple in hindsight, but there was no way to guess that at time of initial installation.

  I am very grateful to you - it was driving me crazy!

• HP envy 100 D410a cannot replace the paper path door in the printer!

  Has received a 'false' paper jam message and followed the instructions to remove door paper to address 'paper jam' path (it wasn't any paper stuck).  Now, it is impossible to replace the paper path door.  Help!  Thanks, Brooklynllp

  This door can be difficult to get back up sometimes. The video below will show you how to replace the door on. Hope that helps.

  http://goo.GL/40uv3

• ENVY 100 D410a failed AirPrint

  How can I set up my printer to have a different printing defect, when a print job is coming from my iPhone 4 via AirPrint vs the default I have configured for e-mail.

  Nope.  It is designed to be an interface for quick and easy printing for printing through your mobile device without having to install software, etc.  You might want to try HP iPrint.  It is a free application that will allow you a greater amount of customization.

• HP Envy 100 D410A

  When I try to print or scan all that I get is colored lines. With the help of Mac Lion and have completed all software updates.   Help!

  Thank you.  I had already tried who and re - install the software, get all the updates, disconnect the unit and everything.  Finally decided to buy a new HP cartridge and not use the filled (from another source).  The color cartridge is HP one even if the printer is now saying that it is not!  So I went on the color cartridge and voila!  I can now copy and scan.  OFF to buy a new HP color cartridge.

• Problem scanner HP HP CN517A - HP ENVY 100 - D410a

  The scanner makes a horrible noise when I turn on the printer as if scanning bar is working, but cannot cross the whole bed scan.  I can print from my PC without any problem but can not scan or copy.

  If you can not make a copy of the standalone printer, without the computer, it's a hardware problem. You will need to contact the HP Support (1800-474-6836).

• Satellite L20-100 - what modules of RAM can I use for the upgrade?

  Hi all

  I have TOSHIBA Satellite L20-100 and I need to upgrade the ram memory up to 2 GB.
  I found these models on the internet but I don't know that it is compatible with my computer laptop or not.

  the following module on the eBay store:

  * 1 GB Kingston DDR2 667 Mhz 1 GB DDR laptop 2 NB RAM *.
  * Hynix 1 GB RAM DDR2 5300 s - computer notebook memory 667 MHz *.
  * ASint 1 GB DDR2-667 PC2-5300 PORTABLE 200 pin MEMORY *.

  Already now I have 512 DDR2 667 Mhz

  Or any knows from where can I update the correct RAM?

  Hello

  Theoretically, you can use all modules store because all the modules to meet specifications, DDR2-RAM, 1 GB, etc. for example.

  In your case, I'd take the Kingston RAM. I've never heard ASint RAM, but I have good experiences with RAM Kingston. I always use Kingston RAM to upgrade my notebooks and never had any problems.

  Last but not least, you can also buy RAM of an authorized service provider.

  Good bye

• PC says I am online but I can't put my fb or hotmail up

  I uninstalled a program for free fonts and now I can't sign into my hotmail or fb other accounts then with this program that allow me to email.

  I also removed my help 'toolbar '!  THX

  Reset ie9 Mr. Fixit for me,

  Check the delete personal settings when prompted.

  http://support.Microsoft.com/kb/923737

  Reset ie9 or ie10 manually,

  Click the Start button in the taskbar.

  Click on Control Panel,

  Click on Internet options,

  Go to the Advanced section,

  Click on the Reset button on the bottom,

  Check the delete personal settings.

  Use the recommended configuration and installation options.

• Toshiba to 100 tablets - power but light can't turn on or off

  I have a tablet that has worked very well since. Just today, he fell asleep while on the charge. The power light and battery lights is on and white as well. I can't have the power button to turn off the power or back on again once. the screen is black.

  Does anyone have any suggestions on what might help?

  You can start with AC power only?

• When I start my pc, windows vista does not illuminate. I can push Central/alt/delete, I can get online, but I can't always access any of my windows files or even a button or a task start bar.

  When I start my computer windows vista pc does not illuminate, I do not have access to my files or tools

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• My computer says I have an internet connection and I can play games online but I can't access any Web site using any browser.

  I have reset my DNS. I tried just unpluging my router and the pluging again as windows troubleshooting says.

  I'm connected using a Wi - Fi connection. my laptop works fine so it isn't my router. my computer is new and is not a virus.

  Hello

  1. is the problem solved?

  Please answer is back with the status of the issue to help you further.

  Thank you.

• I've updated to Lightroom cc and now I have problems with permissions... How do I rectify this? I followed the instructions online, but I can't change the preferences folder permission to read and write.

  Help, please! I updated Lightroom CC through the creative cloud and now lightroom will not organize the citing on 3 files permissions issues. I tried to follow the instructions to manually fix the issue but I can't change my permissions on required files. IM using an iMac with OS El Capitan.

  Salvation without flinching,

  Did you apply permissions to all items included for these files to Adobe?

  Apply permissions to all items in a folder or disk

  1. Select a folder or disk, and then choose file > read

  2. click on the lock icon to unlock, then enter an administrator name and password.

  3. click on the pop-up menu Action , then choose "apply to the included items.

  and you also have to give all the permissions to the Adobe User Library folder (~ / library) as defined by miguana in the initial post.

  Reference article: 6.4 CC 2015.4/Lightroom Lightroom, Photoshop or bridge hangs or crashes at launch

  Kind regards

  Claes