I created a pdf file on my computer that has several links to to other PDFs, word documents, etc. When I send this to people that they cannot access the links. Probably because the files in the links are only stored on my computer. Any ideas?

Similar Questions

• I bought Photoshop element 14 this morning, get the serial number Adobe e-mail and downloaded the software, but... Adobe is always telling me that they cannot validate the software. What should I do now?

  I bought Photoshop element 14 this morning, get the serial number Adobe e-mail and downloaded the software, but... Adobe is always telling me that they cannot validate the software. What should I do now?

  Please see the links below.

  • Invalid serial number error
  • Error "serial number is not valid for this product". Creative Suite

  Hope this will help you.

  Kind regards

  Hervé Khare

• Broadband went down for several days but was back on property that still cannot access the internet

  Went away for two weeks and return to find internet and landline phone at the bottom, contacted bt which were going out but it all came back to the top, light on bnroadband but still cannot access the internet!  Any answers please...

  Contact your ISP to solve problems.

• Windows Media Player won't let me rip a CD, the error message indicates that they cannot find the file

  Is watching the guys, I think not that this is a 7 days without some kind of sleep problem, but I can't work out why Windows Media Player 12 will not rip a CD I put it in, I get an error message saying that Windows Media Player cannot find the file I'm tearing and maybe it is moved renamed or deleated in the meantime that my CD is in the CD/DVD drive waiting to be fooled on my laptop Windows 7 64-bit. I ripped the CD loads before but I had to reinstall a complete a month ago, and this is the first time I tried to extract anything on my laptop. If anybodys got any ideas on how to solve this problem, my inner peace would be much more peaceful MCE! Cheers and Happy New Year to the United Kingdom, I wish you a good and peaceful 2014.  Rich.T

  Hi Rich!

  This might help: http://www.fixkb.com/2010/07/when-ripping-musing-with-media-player.html

  See you soon
  Julia

• When install or remove a product, get error cannot access the windows installer

  Whenever I'm installing an update or remove a product, I get the message "Cannot access Windows Installer"

  Hello

  ·        What are the programs you are trying to install on the system and updates?

  ·        Have you managed to install the updates before on the system without any problems before?

  ·        Remember to make any change to the system?

  I suggest you follow the steps mentioned below.

  Method 1:

  I suggest you to check in services if the service Windows install is set to automatic. Follow the steps mentioned below.

  a. Click Start--> Run--> "services.msc" [press on enter]

  b. scroll down and find "Windows Installer".

  c. right-click on it and choose "Properties".

  d. on the properties page, verify that the "Startup type" is set to 'Automatic'

  e. confirm the "Service status" is "started."

  f. click "OK".

  Method 2:

  I suggest you unregister re-register Windows install and check if it helps. Follow the steps mentioned in the article below.

  Error message "Could access the Windows Installer Service" when you install the application

  http://support.Microsoft.com/kb/319624

  Method 3:

  I suggest you to reset the windows update components and check. Follow the steps mentioned in the article below.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 4:

  I suggest you to download and install Windows install from the link below and check.

  Windows install 4.5 Redistributable

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  I suggest you follow the steps mentioned in the articles given below for further assistance.

  Error message "Could access the Windows Installer Service" when you install the application

  http://support.Microsoft.com/kb/319624

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

  http://support.Microsoft.com/kb/2438651

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• I'm having hard to the installation of an update of Lightroom (4.4) on my PC. It is said that he cannot access the key. Any suggestions?

  It works through the Assistant/Installer together and said so at the end he cannot access/find the key. Don't know what to do. Thank you!

  update by downloading the files directly and then apply them: http://www.adobe.com/downloads/updates/

• Dvd - cd rom on my laptop (Acer Aspire 5515) stop working, I get a code 19 saying that windows cannot access the drivers for this device., how can I solve this problem?

  I had used the Device Manager, try to reinstall the drivers fix for windows etc nothing works

  Hello

  ·         Did you make any changes before the show?

  I suggest that you run the fixit provided in the link below and check if it helps:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

• Healing Brush tool works after that I tried everything that was mentioned in the forums and help guides from adobe. Any ideas what else can we do?

  Ladies and gentlemen,

  who knows what else can be done to make the Healing Brush tool works? I use the latest Photoshop CC app 2015 WITH WINDOWS 10. I TRIED TO RESET THE TOOL, CHECKED ALL THE LAYERS, CLONE SAMPLE AND SO ON.

  ANY OTHER SUGGESTIONS?

  [Read https://forums.adobe.com/docs/DOC-7273]
  [Moved from the connections to specific program... forum forum MOD]
  

  Could you specify exactly how the Healing Brush tool is not working?

  Thank you, whoever this moved to the right forum.

• Cannot open programs and files error: windows cannot access the file or the path of the specified unit. you don't have the appropriate permissions to access the item

  Original title: Search programs and files will not let me

  I get no response from the search - when I hit to see more results I request = aa indicating that windows cannot access the file or the path of the specified unit.  you don't have the appropriate permissions to access the item

  Hello

  1. don't you make changes to the computer until the problem occurred?

  2 when was the last time it was working fine?

  3 are you facing this problem only with Web sites or other sites also?

  I suggest you try the steps below and check if it helps

  Step 1:
  Try to start the computer in safe mode with network and check if the same error message, here is the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2:
  However, to work around the problem, try the step below:

  a. right click on the program file, select Properties.

  b. on the general tab, at the bottom, you will see listed in the issue of safety: this file came from another computer and might be blocked to help protect this computer.

  c. unlock.

  d. click on apply.
  e. click OK.

  Hope this information is useful.

• WES7: 'Windows cannot access the installation sources. "Check that the installation sources are accessible and restart the installation.

  I try to install Windows Embedded Standard 7 on an vacuum Compact Flash 4 GB but when installing, I get an error message "Windows cannot access the installation sources. "Check that the installation sources are accessible, and run the Setup again."

  I created an answer file with the Configuration of Image Editor and I created an Image of the IBW of my answer file. All the files and the Image of the IBW (738 MB) files are copied to a USB bootable 4 GB. I inserted the Flash DRIVE to a computer with a Compact Flash 4 GB (which contains only a primary NTFS partition set as Active) and it starts on a USB key. IBW Wizard starts and I followed the instructions until the disk selection step. I chose the disk and partition of Compact Flash and I press the next button. First 2 installation steps manage (copy of Windows files and extend Windows files) but 3rd step (installing features and updates) failed with the error message "Windows cannot access the installation sources. Check that the installation sources are accessible, and run the Setup again.'.»

  I tried to do the same thing with a Compact Flash 4 GB, which contains 2 partitions: a primary NTFS defined as active and a system partition, but I got the same result. Then I tried to install it on a Compact Flash 8 GB which contains 1 single defined primary partition as active and I managed.

  Problem is that I must install on a Compact Flash 4 GB.

  Can someone help me please?

  For Windows Embedded-related problems, please post in the forum on TechNet:

  http://social.technet.Microsoft.com/forums/en-us/category/windowsembedded

• Cannot access the local users and groups

  Hello everyone, I got this error since April 2010:
  Cannot access the computer ComputerName. The error was: invalid syntax.

  It is not really bad for me, because I used to use the cmd console.

  I followed several recommendation to solve this error, but without success. Many colleagues have the same error. About 100 of the 500 have this problem.
  Don't tell me to reinstall the PC because it is not possible. I have no spare time to set my PC again and install all required software. And to reinstall the PC isn't sollution.

  Re-register the dll or other files not work. Not work replace the msc or cpl files. Installation of the admin packs, technical resource kits or installer also not work.

  No errors in the application logs, no errors in the system log, no errors in the security logs. GPO is clear. The same mistake in compmgmt.msc, lusrmgr.msc, or when I add the MMC snap-in. So I guess that the error in the XML (MS XML) parser tool or in the msc file.

  Do someone have the solution for this?

  Yet once the relocation no solution!

  Hi Peter,.

  In this case, I would say that you post your question in the Microsoft TechNet forums such that there is a problem with more than 100 computers.

  Windows XP IT Pro category

• Error: Windows cannot access the disk.

  I burned a dvd backup of certain data (downloads, bookmarks, photos etc.) files using windows drag and drop in the dvd player.

  The burn has been successful I was able to use it immediately, however, on the second (and subsequent) attempts to access the files burnt a windows error appears indicating that windows cannot access the disk.

  Like all other discs are able to be accessible to all without problems, there is no problem with dvd players?

  Please let know us that it's the only backup I have these files.

  I burned a dvd backup of certain data (downloads, bookmarks, photos etc.) files using windows drag and drop in the dvd player.

  The burn has been successful I was able to use it immediately, however, on the second (and subsequent) attempts to access the files burnt a windows error appears indicating that windows cannot access the disk.

  Like all other discs are able to be accessible to all without problems, there is no problem with dvd players?

  Please let know us that it's the only backup I have these files.

  ========================
  If these files are very important... the
  software suite may be worth a try:

  IsoBuster
  http://www.IsoBuster.com/

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Error message: "Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect. »

  Original title: problems of residential group after system recovery

  I started a homegroup on my computer.  I added another computer to the homegroup.  Everything worked fine until I had to perform a system recovery on the laptop that I used to start the homegroup.  I implemented the homegroup again, but I can't access the files on the other computer via Windows Media Player.  I get an error message that says "Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect. "I can access all the music files via Windows Explorer.  I have to start over with a new password?  Can I just create a new homegroup?  What other options do I have?  You can provide any help would be greatly appreciated.  Thank you.

  Hello

  Please follow the methods and check the issue:

  Method 1:

  Open the homegroup troubleshooting utility:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-HomeGroup-Troubleshooter

  Method 2:

  Why can't I access my homegroup? :

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-access-my-HomeGroup

  For reference:

  Homegroup: frequently asked questions:

  http://Windows.Microsoft.com/is-is/Windows7/HomeGroup-frequently-asked-questions

  Method 3:

  See the steps in "include a folder shared in a library" from the link below:

  Access to files and printers on other homegroup computers: http://Windows.Microsoft.com/is-is/Windows7/access-files-and-printers-on-other-HomeGroup-computers

  I hope this helps.

• Where the photos are normally stored on a Mac computer? In the folder images in the Finder on my Mac, I see a file called "Library.photoslibrary Photos" i.e. 28.52 GB but I also have about 160 other image files in the same folder. But in pictures,.

  Where the photos are normally stored on a Mac computer? In the folder images in the Finder on my Mac, I have a file named "Library.photoslibrary Photos" i.e. 28.52 gb and another folder called 'iPhoto Library.migratedphotolibrary' i.e. 4.95 GB, but then I have also on the 160 other photo and video files in the same folder. But in my Photos app, it says that I have 6 260 'elements '.

  The pictures that you have imported into the photo library are, by default, stored inside the package (not file) "Library.photoslibrary Photos" in your pictures folder. The 'iPhoto Library.migratedphotolibrary' package would contain photos that have been stored in your library, iPhoto at the time of the migration.

  The other files in the pictures folder are that: other files. Also, they can be in libraries if you imported and has not deleted the copies lying around in the images.

• System 32 error (0x00000020): "the process cannot access the file because it is being used by another process.". The operation to open the file will fail with error - 1032 (0xfffffbf8(JET_errFileAccessDenied))"

  Original title: svchost (1020)

  Event type: error
  Event source: ESENT
  Event category: general
  Event ID: 490
  Date: 2010-10-19
  Time: 14:51:34
  User: n/a
  Computer: ROB
  Description:
  Svchost (1020) an attempt to open the file "C:\WINDOWS\system32\CatRoot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb" for read / write access failed with the error System 32 (0x00000020): "the process cannot access the file because it is being used by another process.".  The operation to open the file will fail with error - 1032 (0xfffffbf8(JET_errFileAccessDenied)).

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Hi Robrw,

  1. when exactly you receive this error?

  2. don't you make changes to the computer before this problem?

  You can try to rename the catroot2 folder and check if it helps.

  Step 1:

  a. Click Start and in run type C:\windows\system32 and click ok

  b. find the Catroot2 folder. Right-click on Catroot2 and rename it to Catroot2.old

  If you are not able to do the normal mode, try to start in safe mode and rename

  Check out the link for more information on starting your computer in SafeMode below:

  http://support.Microsoft.com/kb/315222

  Step 2:

  If you are unable to access the catroot2 folder, and then try to change the permissions on the files and check if it helps.

  See the following article:

  How to capture a file or a folder in Windows XP

  http://support.Microsoft.com/kb/308421

  Step 3:

  You can also try to temporarily disable third-party security software and firewalls and check what is happening.

  Note: Activate the security software after the resolution of the problem.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.