I created a separate administrator account and can't get it to appear at startup.  I need to send my Macbook repair and need this ID to show when they turn on him. How do I do that?

Similar Questions

• Drive mapping: How can I get my external drive be mapped to F: (as he was once) rather than g: which is what happens when I turn on now.

  How can I get my external drive be mapped to F: (as he was once) rather than g: which is what happens when I turn on now.  I tried to unplug and power, reboot etc.  There is no F: drive connected to the computer.

  Go to start / Control Panel / administrative tools / computer management / "disk management and select external reader by clicking on it and then right-click on it and select change drive letter and paths."  It should show the letter currently assigned (G I guess).  Click the button change.  To the right will be a drop of drive letters box.  Go ahead and select F and click on OK.  That should do it. If F is not available, then it is used by the system for something else.  Check disk management to see if you can find it.  If it is not, and is not available in the list, I'm afraid, you will not be able to change until find you what is using drive letter F and remove it, or change it to something else.

  I hope this helps.  If this isn't the case, after return and we will try to understand what is using F or why it is not available.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I tried to create a second administrator account and my original went

  I tried to set up a second administrator to connect and now I can't access the mine. I tried to start another and he tells me that my account already exists, but I can't seem to him

  If you tried to use the same account / username, so maybe it's a conflict.

  but in any case, you can restore the accounts of users through the system restore.

  my suggestion is to run a restore via safe mode and restore the old admin account.

• How can I get my favorites appears on the personal bar? The bookmarks toolbar is just empty, even though it lists all my favorites below him when I open my favorites.

  I used the toolbar bookmarks for awhile. I was using Firefox last night, when I noticed it was empty. I went to view > toolbars > toolbar bookmarks and checked and unchecked it happens several times, but just what is a toolbar is empty. I also opened to the top of my favorites and all my favorites saved as Favorites bar are still there, and the links seem to work. I also stopped and restarted my computer, but the Favorites bar is always empty and I don't know what to do.

  Make sure you always have the "Bookmarks Toolbar items" on the personal bar

  • Make sure you have the 'personal bar' visible: "view > toolbars".
  • Check in "view > toolbars > customize" "Bookmarks Toolbar items" are on the personal bar
  • If the "Bookmarks Toolbar items" is not on the bookmarks toolbar, then get it back from the window Customize on the bookmarks toolbar
  • If you do not see the "Bookmarks Toolbar items" then click on the button "Restore Default Set"

  See also:

  • http://KB.mozillazine.org/Toolbar_customization

• I don't have access to the standard account is a password on the administrative account and don't remember and I don't want to remove the account because I have important documents, how can I access the account without the password

  I don't have access to the standard account is a password on the administrative account and don't remember and I don't want to remove the account because I have important documents, how can I access the account without the password

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. Mick Murphy - Microsoft partner

• How can I remove the administrator account and perform a factory restore?

  Original title: how to delete the profile directors and password if you've blocked out of it and that you don't have a cd player for upgrade to windows 8 when you buy the software

  I recently bought my computer from a friend of mine and he forgot his password to the administrator account and I can't do anything as change download settings nothing I want to just remove it at the factory but can't do not know how and I do not think that it won't let me

  You perform a factory restore to make the machine 'as new '. Consult the manufacturer's web page for detailed instructions.

• How can I copy the user created in the administrator account?

  Hello

  I would like to ask what can I do? When I installed Vista Home Premium on my computer, I created another user account! I have configured my PC how I like it! With all the parameters that I need (research, programs, etc...) I don't want 2 user account, but I can't remove the administrator one! (Now, it's empty, nothing about this)

  So, how can I copy all my settings, remove the user and a user account?

  I hope I was understandable! :)

  Good day!

  Hi Muzsika,

  I don't know what you mean, so I'll just say what I think is your problem, and then respond.

  Problem: I have a standard account I have all my files in and have customized this account. I have an administrator account that I don't use. Because I can't remove the administrator account, I would copy the standard account for the administrator account and remove the standard account.

  The answer is: change the standard account to an administrator. account, and then delete the other admin account.
  How to change an account type to administrator: (necessarily using the account admin.)

  1. Open a user account by clicking on the button start , clicking Control Panel, clicking user accounts and family safety, click user accounts, and then clicking on manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. Click on the standard account and then click on change the account type.

  3. Select the type of account you want, and then click on change the account Type.

• Ability lost access administrator account and create files (using Windows 7)

  Running windows 7, administrator account has disappeared and cannot access (it is listed as a user with permissions (mine has changed and he's been a user listed as S-1-5-21-3964978265-1859684145-9075597-1000 and finally managed to remove it (I think)) and the ability to create folders, or by clicking right in applications.)

  Clicked on what I thought, it was a reliable site, the message says that I had to update Flash to enter the site, after a large number of ads downloaded and changed my browser; I just uninstalled from this time, installed backup of the previous day and blocked unwanted applications through my Norton.

  I don't know if there is something else that is affected.  How can I fix it, my level of knowledge is limited on what I should and should not on my system.
  You can probably fix your problem by using the system restore. Here's how it works:
  1. keep tapping F8 during the first phase of startup.
  2. select Repair from the menu.
  3. Select an administrator account, and then enter its password.
  4. When you are prompted, select System Restore.
  5. set Windows to a point before this problem occurred.
  6. plan in advance and create, test and document a spare, even admin account that you have a spare House key.

• I created a new user account and now I can't find my documents, photos and music

  I created a new user account and made computer administrater and now all my documents, music, photos have gone what to do to get back to my old account

  Hello

  1. did you remove the old account?

  If you have not deleted the old user account, and then follow the steps in this link to copy files to the new user account and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Check if that helps.

• Local administrator account and issue of local Group Policy permissions problem.

  You have a local administrator account where it was defined

  http://img26.imageshack.us/img26/5716/18112010133154.PNG

  I think preventing the admin account to remove or install devices.  This causes a problem.  Looks like it's AD GP as is grayed out and I can't add locally.  The network team claim there is no GPs AD to limit the admin account local they know of.

  Also, I try to use the process on the machine monitor, but who needs administrator rights and he repeats that the local administrator account is not a member of the Administrators group, but it is.

  Any ideas?  Even if it's just he Process Monitor bit setting?

  And looking at the photo can someone explain which means that icon next to load and unload device drivers.  It is different from the others and think that it is linked, may be trying to tell me that it is a strategy of AD Group.

  I talked to the networks, they said there is not together AD GP for this.  I used the local administrator account to create a new local administrator account and put it in the Administrators group.  Connected to it and it also has the same problem.

  Any ideas?

  The symbol, that you reference indicates that the setting has been locked by group policy and is not editable.  When I saw it in the past, the only way I could replace, it is using "secedit".  For more information about this command:
  Starting-> help and support-> Search: Secedit

  "Elephant Gun" approach might also work:

  "How to restore the security settings the default settings?
    <>http://support.Microsoft.com/kb/313222 >

  HTH,
  JW

• NEED TO MERGE TWO ADMINISTRATIVE ACCOUNTS AND ALL THE FILES IN XP - NO WINDOWS 7! CANNOT FIND TRANSFER IFTO ANYWHERE.

  I desperately need to merge two administrative accounts on my laptop - using XP and NOT windows 7 (so there is no transfer Assistant). I need to transfer all of the OLD admin. account in the NEW Admin account.

  For the full backup used Carbonite - due erase hard drive and reinstall XP - carbonite cust. veeeeery slooooow service and I had to use the laptop for the preparatory work.  When the backup has been restored, he implemented the administrative account of origin, besides I have created a new.  Now, most of the files are under the old administrative account, and I need to move the OLD files in the NEW Admin account.

  Would sincerely appreciate your very specific instructions? ... step by step, if possible? Not quite a prolific technician, but no slouch, not more.

  Thank you very much!

  You can't really merge two accounts. You can copy data from one account to the other. Folder options > view tab > check "Show hidden files". Then go to:

  c:\Documents and Settings\name of the old account and copy the files to My Documents, desktop, Favorites in folders in your new user account. When you have all your stuff, you can delete the old user account from the control panel > user accounts. MS - MVP - Elephant Boy computers - don't panic!

• I deleted my windows vista administrator account and lost the password.

  I deleted my windows vista administrator account and lost the password. Now I can't get the email or download anything because the user controls pop up window ask again me an administrator password, which I don't have. I need to create another administrator account and the password, but I can't do anything without a password?

  Hello

  If it is not applicaple, you need to reinstall the operating system.

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• I created a new Admin account and when I went to her, I got the message: "The service user profile Service has no logon. The user profile Service failed to load.

  I created a new Admin account and when I went to her, I got the message:

  "The service user profile Service has no logon.  The user profile Service failed to load.

  What's up with that?

  Hello

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
  (or two with the same password) use a test or fix the other.

  You can run the Admin account hidden from the prompt by if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Administrator accounts and user Standard

  I want to configure my Windows 7 Professional user accounts properly for one user and seeks advice.

  In getting started, I entered a password for the Administrator icon that is displayed on the PC.

  Can I add a second administrator account and a Standard account for a user?  Thank you.

  This seems absolutely perfect for me, indeed.  And if you are curious and you want to check, you can open a command prompt (right-click of your Start button and choose it from the list), and type net user to see which accounts you listed.

  After you have finished it all, I suspect that will show you:

  FT123 Director Director of Lenovo

  Here is mine:

  

• It's been two months that I downloaded photoshop cs6 and it was fine, but now when I try to open the program, he said that I have to uninstall. When I go to the control panel and click on uninstall, so I can install it again, it just says: I need to clean

  It's been two months that I downloaded photoshop cs6 and it was fine, but now when I try to open the program, he said that I have to uninstall. When I go to the control panel and click on uninstall, so I can install it again, it just says: I need to clean my computer or restart, because it can not uninstall the program. I already did and it is still not uninstall. How should I proceed?

  run the cleaner, the use of the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

  and then reinstall it.

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".