I decided to do a clean install of windows 7, but when the disc it stops to extend windows files 0% I do not know why this happens is the drive.

Similar Questions

• Clean install of windows 7, now I have no permission to copy on external hard drive.

  I have a HP media center 2005 office which originally had XP on it. I bought an upgrade Windows 7 years and installed and never had a problem. Two weeks ago I reformatted my computer to get rid of a redirect virus, and everything seems to work perfectly except for one thing: my C: drive and both of my external hard drives, K:, and M: require administrator privileges to copy/paste/modify anything.
  When I did a clean install it automatically gives me an admin account.

  My question is, what can I do to change the permissions and security settings, while I have a total control over EVERYTHING. I recently tried video file on my external drive and he told me that I needed permissions and click ok to try. But he did nothing.

  I want access to all of my files. Drive C and the two external. I noticed that the security options when I consult my files or directories where showing these accounts:

  SYSTEM
  Josh (Josh-PC\Josh)
  Administrators (Josh-PC\Administrators)
  Everyone

  and I was getting a SID that is long enough

  There are a lot of files, but one in particular that made me on this hunting witch was changing my user profile file in Firefox. I did a clean install and wanted to change the shortcut menu in firefox, but also a few other settings.
  This just happened to reside in C:/documents and settings /

  The recipe is the same as before: take ownership of the problem folder. It make recursive so that you don't need to treat each case separately.

• (Redirected) How can I do a "clean install" of Windows 10 on my 32 GB tablet which has limited space C drive?

  My conference table 8 has 19 GB for the C drive and 7 + GB of unallocated space. I want to install Win 10 but can not remove enough files to get 3 GB of free space for download to win 10...

  Best of this post in the forum Windows 10 here:

  http://en.community.Dell.com/support-forums/software-OS/f/4997

  Bev.

• did a clean install of windows 7/64 bit pro on dell xps 8300 and error no driver for sm bus controller / / help

  I need sm contrller driver

  dwDUSTER,

  When you reinstalled the operating system, have you installed the software of computer system and the first chipset drivers? If this is not the case, the rest of the drivers will not install. How to download and install drivers in the correct order

  Start with the computer system software and the chipset drivers and follow the list.

  Rick

• clean install of windows XP to input signal out of range

  Hi I recently took my old pc xp out of the dusty closet.
  I discovered that the operating system has been corrupted then decided to do a clean install of windows xp.
  However after that it says press any key to boot from the disk and I press a button, then it went to a screen blank and says on the monitor says "Input Signal out of range at 1280 x 1024 60hrz. change."
  I also did a reset factory monitor and hooked up the old pc to the tv.
  So I would like to know how to solve the problem, any help would be much appreciated.

  Hello

  First you using a discrete graphics card or graphics are integrated with the motherboard? Change BIOS battery (or whatever it is in the BIOS change to any method) will not change anything to do with a graphics card discrete and not likley to do much for either integrated graphics card.

  What it sounds like to me, is that the key to the race to start from the CD is not recognized and that Windows is actually booting from the hard drive with a resolution taken not supported by your monitor. But, being not there, I can't be sure of this so here are some ideas of diagnostic.

  Start the PC without the CD inserted, do you have the same problem?

  The keyboard is correctly connected?

  If a PS/2 keyboard is it plugged into the outlet of PS/2 mouse by mistake (keyboard taken are normally purple, green mouse normally Sockets)?

  Is the keyboard PS/2 or USB? You can try another keyboard ideally with the other type of interface?

  You can get in the setup of the BIOS by the appropriate key combination (usually F2 or DEL but I saw others also, look for the message at startup upwards)? If you can not it would indicate a keyboard problem.

  If you can remove the keyboard as a problem, I would return to my original question on a discrete graphics card. If there is a discreet graphics card, the motherboard is also a graphic? If this is the case, remove the discrete card and try windows set up again. Or even try installing windows with a spare graphics card if you can get your hands on one. Turn off the computer and unplug it from the socket before to remove/replace all internal components.

  Finally, what of the installation CD? Is this the one supplied with the PC? It is the recovery of the real manufacturer CD or CD from Microsoft genuine?

  Tricky

• Question seeks to clean install 10 Windows on the drive of the merger. El Capitan.

  Problem: try a clean install of Windows 10 via the Boot Camp Assistant on an iMac 27 inches (Late2013) with 10.11.4 installs hours (more than 8 hours) and then failed to install Boot Camp updates. Essentially installation take much long than normal and cannot install updates of the Apple software or create normally start Windows Boot Camp 10.

  Background: After problems of slowing down after upgrading to 10.11.4 (with improved Bootcamp Windows 10) who had previously worked fine for 10 months, to the point of a start of OS X time, I decided to do a clean install of my iMac with Fusion 3 to disk.

  As I was unable to remove the partition from Boot Camp through BCA because of his holding always at the same load, I used Internet recovery and reset the Fusion drive. This then required me to repair the partition of Fusion by car through THE "fix" option which seems to work very well. And reinstalled OS X 10.11.4 which works fine now (delays etc..)

  Try using BCA to create a new partition Boot Camp and a clean Windows 10 install after downloading an image of disk W10 directly from Microsoft (Win10_1511_1_English_x64), BCA by downloading software updates and by selecting the desired partition, it began to restart and initialize the installation. However the whole process has been very slow, each step takes much longer than usual, to progress. Leave for hours rest a blank screen or with a circle of rotation.

  I tried with another stick USB 3 and also a USB 2 stick, but none has made a difference.

  In the last attempt, I left running overnight and after 8-9 hours, he finally reaches the top of desktop Windows 10 and the update of Apple Bootcamp starts to load updates. However, he just hung and even after 2 hours, nothing was. Reboot and try once again has been the same.

  After that I tried to create a Windows Installer via BCA 8.0 however it gives just a TPG error when you try to select the drive (due to el Capitan I guess?)

  After four days of efforts, I'm a loser on how to get the Windows 10 on the Boot Camp partition. I can't even install W8 and upgrade due to the error of TPG.

  Any help or suggestions how to proceed with the diagnostic / resolution of the problem would be appreciated.

  Details:

  System: iMac (27 inch, end of 2013), 3.4 GHz Intel Core i5, 16 GB 1600 MHz DDR3, NVIDIA GeForce GTX 780 M 4096 MB, OS X 10.11.4

  • Nothing other than the keyboard and mouse attached via the USB ports, as well as the key USB of BCA. No other attached devices.
  • Reset memory NVRAM, SMC and ran more than once disk utility. No problem not reported.  Ran NVRAM reset before each attempt.
  • At ran EtreCheck report which seemed OK.
  • Verification of diagnosis ran who is childless.

  A detail I noticed after the merger by car there are now two Macintosh HD images when you use boot option. One previously. Are named "Macintosh HD" and "Macintosh HD2". I remember being Yosemite simultaneously in three, but which has been fixed in an update.

  In addition, it seems that no recovery partition. Cmd + R lance Internet recovery.

  Distill the results (the Boot Camp partition removed):

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB internal drive 121.0 disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk2 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk2

  1: disk2s1 NO NAME 209.7 MB EFI

  2: disk2s2 Apple_CoreStorage TB 3.0 drive internal

  3: disk2s4 Apple_Boot Boot OS X 134,2 MB

  / dev/disk3 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 3.1 TB disk3

  Logical volume on disk0s2, disk2s2

  7BE1F343-ACBE-4144-BF86-C838BE1E49D4

  Fusion unencrypted drive

  iMac - simon: ~ list of cs simon$ diskutil

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group CA0B8D0A-6315-4E85-B313-52AB509473F2

  =========================================================

  Name: Internal drive

  Status: online

  Dimensions: 3121237860352 B (3.1 TB)

  Free space: 0 (0 B) B

  |

  +-Physical volume 5E75EE74-EE1F-4FCB-A0C5-9ED5517FEB93

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-Physical volume 91D639D6-634E-47C1-AFE5-616CE12E71E0

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk2s2

  |   Status: online

  |   Dimensions: 3000249008128 B (3.0 to)

  |

  +--> Logical volume family EE9934AC-F3CB-4101-ADB6-576F4371B4B9

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 7BE1F343-ACBE-4144-BF86-C838BE1E49D4

  ---------------------------------------------------

  Disc: disk3

  Status: online

  Size (Total): 3106705375232 B (3.1 TB)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  Summary:

  Q1: Should it take 4 + hours to install Windows 10 via BCA?

  Q2: Al must ultimately be so slow when initially W10 desktop?

  Q3; What I do once I arrive at the office of W10 but it automatically updates the graphics driver as BC update is simply suspended for centuries and get a working driver to restart at least W10?

  Q4: is there a problem with the disk HARD the Drive of Fusion that is causing all this delay and slow install / boot? ON the clean install OS X 10.11.4 it is back to be fast as usual and all tests show things are OK but W10 goes on the part of the HARD drive. No way to verify this beyond diagnosis or Etrecheck?

  Q5: Y at - it no problem with the GPT / MBR that may be causing the delay etc. ?

  Q6: How can I use my existing WindowsImageBackup backup from the previous W10 with the BCA install usb drive or how to create a USB stick otherwise recovery disk with my other single Mac have W7?

  Q7: How can I install W8 as I once did on Yosemite, via el Capitan without a mistake to TPG on selection of disc?

  Details:

  Day 5. Attempt at 6.

  Partition Boot Camp delete and try again install via BCA. First question, is that when the startup it goes to a blank black screen. For a time nothing left. Reset then using alt to select windows training results in almost instantaneous startup of the BCA message created and the beginning of the installation.

  4 1/2 hours from start of Windows 10 initial signature window.

  Then the second question. One to reach the Boot Camp update Office tries to start and install the drivers. Allows you to "list files...". "stage then sits at the bar about 5% green for 1 to 2 hours and does nothing. All actions in the Office of the W10 takes ages.

  In the meantime, auto update of the W10 appears a message saying that the updated graphics drivers as one of the few messages or actions during this period. Looks like Nvidia install with the entire package of experience (unwanted) etc. and very probably not the correct gpu driver.

  Finally deciding to cancel the installation of BC by killing the Setup.exe process. Then copy Boot camp install files on the desktop. Lasts 30 minutes to copy. Run again and this time, although taking 15-20 minutes to download and install later with the success message.

  Check the graphic driver it shows a yellow exclamation mark, so the following Microsoft instructions I use the uninstall option via the device and then Manager (slowly) come on board to load and download the latest Nvidia driver on their site for the GTX 780 M for 64-bit W10 etc. The same thing that I had used previously. Slow with running the Nvidia Setup program again, but eventually it works only to say that he could not install as unrecognized graphics device...

  He ends up with Microsoft PnP driver so it's at least sufficient start and run it again BC of the figure updates as all other drivers have been installed. To restart, but I get an error of K-Mode that is most likely related to this driver graphic and not possible to start in the new W10 Boot Camp partition after 7 hours.

  I have a picture of W10 backup recovery (WindowsImageBackup) I've had in a few weeks, but it will not install bet for the installed W10. I try with the ACO created the USB windows but can't seem to get a way to get into recovery mode and to get the menu to install it. I don't have a way to create a USB W10 recovery key now because my other Mac has just installed W7.

  Finally I tried to count a reset of the Recovery boot up option but it seems that it will take longer to start.

  I also went to the recovery and selected Boot Mode safe, but it opens on an empty black window and he's here doing nothing.

  Looks like I'll have to restart on via BCA and reinstall and try and solve the problem of graphics in order to install driver updates from BC and restart to W10 and hope that with the drivers, it returns to the operation and the normal starting time. Then update the gpu driver.

  I used and installed Boot Camp several times with over the years including previously an upgrade of W8.1 > W10 I used for over 6 months without problem. I've never known these installation very long or ice once in Windows even for the initial start upward.

  For any help or suggestion would be appreciated, and this seemingly simple process has now expanded to five days.

• H8 - 1520t: how to do a clean install of windows 10 on another drive?

  Hi all.

  Today, I decided to make the transition to windows 10. I want to do a clean install, however, because I recently had an SSD and install the OS on it instead of on my hard drive. First of all, I even need my product key to do a clean install on a new drive? I made a clone of my C: dirve just in case something goes wrong, cordially. My SSD is 100% empty and has 110GB available on this subject, but my main hard drive has about 400 GB of stuff on it, so cloning my drive for the SSD drive is out of the picture.

  So basically what I want to know is this: 1. do I need to have my windows key to do a clean install of windows 10 8.1 of windows on a different drive.

  2 if not, how to do a clean install on a new drive

  3. If I need, how can I get it?

  Thank you all

  The simplest solution would be to save the data that you want to keep on an external hard drive, then remove this data and programs from the old hard drive so that only the BONE remains.  From there use migration software from your manufacturer SSD to clone the old drive to the new SSD using a USB to SATA.

  The Windows key is embedded in the BIOS and will be recognized by the computer on any installs.  It would be desirable to collect your key, just in case, using Belarc Advisor, which gives you all kinds of info on your computer.  Do this before doing anything.

  http://www.Belarc.com/free_download.html

  Share your drive and be sure that it is operational.  Now you can perform a new installation of the upgrade of Windows 10 using an ISO bootable.  See step 5 or 6 of this tutorial:

  http://www.tenforums.com/tutorials/2267-Windows-10-upgrade-installation.html#step3

• X 220 clean install. Now, no OSD and the battery don't charge threshold

  Hello world

  I installed an mSATA SSD last night with the 2.5 hdd 320 "stock on my X220i (4286-2AU). I did a clean install of Windows 7 on mSATA, that will be my OS drive.

  I installed most of the drivers for the devices, but note that even if most of the function keys (FN +...) (the WIFI FN + 5 even does not), is no longer there we're working on a display on the screen. I play with this before clean install so I know that with the factory settings, OSD worked very well. I check the display properties in Windows and on screen display is checked.

  In addition, in the power manager, I have more the possibility to set minimum and maximum battery charge start and stop the thresholds.

  For the power management driver I installed only
  Power Manager for Windows 7 (32 bit, 64 bit), Vista (32-bit, 64-bit) - ThinkPad

  and to the left of two other pilots:

  • Driver ThinkPad Power Management for Windows 7 (32 bit, 64 bit), Vista (32 bit, 64 bit), XP (32-bit, 64-bit) - ThinkPad
  • Module ThinkPad Power Manager Patch for Windows 7 (32 bit, 64 bit), Vista (32 bit, 64 bit), XP - ThinkPad

  I've also already installed I think I should have to take care of OSD but I guess I was wrong:
  Integration of features Hotkey for Windows 7 (32 bit, 64 bit), Vista (32 bit, 64 bit), XP (32-bit, 64-bit) and 2000 - ThinkPad

  but decided to jump:
  ThinkVantage Access Connections for Windows 7 (32 bit, 64 bit) - laptops

  Would appreciate any help on this matter. He's not a killer, but thresholds OSD and battery were something I was looking forward from that installed clean.

  Thank you!!!

  Hi alanbrenton;

  Did you put it in there.

  This must go with shortcut keyboard and Power Manager.

  Dave

• HP Pavilion - 15-p264na: audio beats does not open after a clean install of windows 8.1

  Hello

  After a clean install of windows 8.1 the audio beats does not open.

  It appears in the control, but when I click on it nothing happens.

  I have sound, and everything seems to work ok, but I'm curious to know what happened.

  When I go to Device Manager and select audio, video controllers and game, there are 2 features 1 is AMD high definition audio and the other just says high definition audio device.both drivers are up-to-date.

  I look through the forums CIHI and I tried some of the links for the drivers of the itd, but they will not install.

  Any help would be appreciated

  Hello

  Download and reinstall the Realtek HD Audio software at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp69001-69500/sp69164.exe

  When the installation is complete, restart the laptop.

  Kind regards

  DP - K

• error message iTunes displays locked drive, itl locked files, or do not have administrative privileges on the PC after a clean install of Windows 10

  Yesterday I did a clean install of Windows 10 on my PC with a backup of the hard disk external. I downloaded iTunes, but get an error message that the drive is locked, the .itl files are locked, or I don't have administrative rights to these files. I deleted and reinstalled the PCI DSS several times correctly in the PCI slot hoping that would be a solution, but to no avail. I am the only user on this computer and do not have administrative rights. Any help you can offer will be appreciated. Thank you

  This can help (from turingtest2):

  Fix iTunes for Windows security permissions

• Clean install of Windows 7 on Satellite L655

  I have a Satellite L655 and replace the HDD with a SSD (2 sheets) system (more small capacity, 1 partition). I also want to do a clean install of Windows 7.

  I'll be able to use the recovery disc for this? If so, will I have to reactivate? Thank you.

  > I'll be able to use the recovery disc for this? If so, will I have to reactivate? Thank you.

  What exactly do you want: clean windows installation or by using the disk Toshiba recover?

  I mean own installation only the Windows operating system using the Microsoft Win 7 disc.
  This installation requires a valid serial key.

  But using the Toshiba recovery disc requires no any key since the BONES of the window is already enabled on this drive.

• Portege Z830 - on a clean install of windows access keys

  What do I need to work the KEYS FN on a clean install of Windows?

  I have a Toshiba Portege Z830, width window 8.1 Professional (he cams 7 width windows).

  The first time I installed windows 8, I'm doing the hotkey working width drivers Toshiba a upgrade of windows 8.
  But now, after a new installation, it does not work.

  Some keys work, such as FN + 3 or 4 for the sound. But I think that it is a feature of windows. I need the combination of brightness FN + F6 or F7, and they do not work.

  What should I install? I read that I have to install the driver of Toshiba value added package system, but it does not work. There is also a utillity called Toshiba function key.

  What should I install?

  Thanks ;)

  *@Infocomit*

  Don t be angry with me, but you're wrong. Sometimes it s advisable to check some things twice.
  Driver Toshiba UE page provides details and description on the drivers and utilities.
  If you need to get the details about the unique software, click on the red arrow in the Details column.

  By the way: it's community of users.

• Satellite P305-S8820 - FN key not working after a clean install of Windows 7

  Hello

  I have a Toshiba Satellite P305-S8820. I recently did a clean install of Windows 7. I loaded the value Toshiba driver pack and the trackpad driver but still cannot get the trackpad or press FN to work.

  Any ideas?

  Hi taxwiz,.

  I think that the forum already contains hundreds of discussions about this so why you n t use the forum search?

  Anyway, you need the latest version of Toshiba Value added Package and utility Support Flash Cards.
  Try to also restart Toshiba Flash Cards (start > all programs > Toshiba) and repeatedly press the FN keys.

• Clean install of Windows 8

  I want HP DV6t. There are some informal activities past in my laptop. So I just want to do a clean install of Windows 8. I don't want to delete my other files on the disc. I just want to reinstall windows 8. I have the recovery disk. What are the steps to follow... ? Someone help

  A clean install of Windows 8 will be erase your other files by definition as recovery disks. Fortunately, Windows 8 has a few new options of Maintenance not seen in earlier versions. You can try a BONE 'refresh' that will install the new system of Windows 8 files without disturbing your data or settings.

  http://www.PCMag.com/Article2/0, 2817,2410848,00.asp

  You want to back up your important files before there is a small chance that it can go wrong.

• I would do a clean install of windows 7 Professional 64 bit in my hp probook 4540 s

  I would like to do a clean install of windows 7 Professional 64-bit in my hp probook 4540s.after install exactly what are the necessary to install drivers and whence? Thank you

  Hello:

  Here is the link to the support page and drivers for your laptop.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5229457&prodTypeId=321957&prodSeriesId=5229455&swLang=13&TaskID=135&swEnvOID=4059

  Now, we can tell you exactly what drivers to install the adapter wireless because he could be one of several models installed in your laptop.

  You must install the following drivers in this order.

  Chipset: Installation and reboot

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-105389-1

  Video: How to know what graphics card is in your notebook (AMD or Intel). Install and reboot.

  Audio: Installation and reboot

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-106423-1

  Wired network:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-105307-1

  Then these are the drivers, I know that you will need:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-105298-1

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-104954-1

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-104949-1

  Paul