I deployed a private teredo server, I'm not using the public prefix 2001: 0 / 32, instead, I use the prefix 2001:2222 / 32

Similar Questions

• My Thuderbird for mac does not delete messages from the server and can not find the setting in tools to do.

  According to the forum users, you go to tools-> account settings and there should be a box to "leave the message on the server" that I can uncheck, however, I don't see that my Thunderbird program for mac.

  You use the POP or IMAP protocol by e-mail? I guess that IMAP because you do not see the option.

• Windows Homer Server Media Center not showing the new files I downloaded

  So I installed WHS2011 and thought that the library would easily work. It seems that the new files I put on the server are not get updated when I try and view them through the Media Center. Also when I serach for libraries on another device, it shows me two homeservers, one who say no files present and the other who has files (but does not update the index!). What is going on? (the file types are the same as the other files that are appearing fine)

  It is a basic installation, the only change I made is to move the directory to a new hard drive and update the WHS settings to point to the serverfolder updated on the new hard drive.

  I checked the settings on the media section of sharing control panel and it's on, I also checked on the dashboard and the media of Stentor is enabled.

  Why are my new files not updated in the index?

  Why two media servers on my other devices?

  Hello

  Your question would be better suited for the TechNet forums.

  I suggest you to ask your question to the forum Server TechNet for better assistance.

  http://social.Microsoft.com/forums/is/whs2011/threads

  Thank you.

• Flashback DR server error: could not allocate the newspaper flashback

  Hello
  
  I have a database of Eve and the DR journal with primary database synchronization was interrupted from under errors cause:
  
  Impossible to allocate the newspaper flashback to 1946 blocks of
  current area of size 2147483648 bytes.
  Writer (RVWR) recovery is blocked until more space is
  available in the recovery area.
  Cannot write the Flashback database log data because the
  recovery area is full, presence of a guarantee
  restore point and no newspaper reusable flashback.
  Use ALTER SYSTEM SET db_recovery_file_dest_size command
  to add a space. DO NOT manually REMOVE the flashback logs
  to create a space.
  
  -> The DR Server
  
  SQL > SELECT SWITCHOVER_STATUS, PROTECTION_MODE, DATABASE_ROLE, PROTECTION_LEVEL, INSTANCE V DB_UNIQUE_NAME OPEN_MODE $ DATABASE;
  
  DATABASE_ROLE INSTANCE PROTECTION PROTECTION_LEVEL
  ---------------- ------------------------------ ---------- --------------------
  SWITCHOVER_STATUS
  --------------------
  A80 ENSURES PHYSICS MOUNTED A MAXIMUM PERFORMANCE
  ACTIVE SESSIONS
  
  SQL > select process, status, thread #, sequence #, block #, blocks from v$ managed_standby;
  
  STATUS OF PROCESS THREAD # SEQUENCE # BLOCK # BLOCKS
  --------- ------------ ---------- ---------- ---------- ----------
  ARCH CONNECTED 0 0 0 0
  ARCH CONNECTED 0 0 0 0
  MRP0 1 29118 125049 186723 APPLYING_LOG
  RFS IDLE 0 0 0 0
  RFS IDLE 0 0 0 0
  RFS IDLE 0 0 0 0
  
  6 selected lines.
  
  -> Alerts log
  
  Sat Mar 17 04:51 2012
  RFS [606]: journal Archives: "L:\ORACLE\A80\ORAARCH\A80ARCH\ARC29222_0681431456.001."
  Primary database is in MAXIMUM PERFORMANCE mode
  Sat Mar 17 05:51:07 2012
  RFS [606]: journal Archives: "L:\ORACLE\A80\ORAARCH\A80ARCH\ARC29223_0681431456.001."
  Primary database is in MAXIMUM PERFORMANCE mode
  Sat Mar 17 06:51:04 2012
  RFS [606]: journal Archives: "L:\ORACLE\A80\ORAARCH\A80ARCH\ARC29224_0681431456.001."
  Primary database is in MAXIMUM PERFORMANCE mode
  Sat Mar 17 08:50:40 2012
  RFS [606]: journal Archives: "L:\ORACLE\A80\ORAARCH\A80ARCH\ARC29225_0681431456.001."
  Sat Mar 17 12:28:30 2012
  ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL
  
  
  I did an "ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL" to stop sending newspapers on DR server but the command is suspended.
  
  I also tried freeing disk space in my flashback reader, but I think it will not help as it is shown in the error message:
  'DO NOT manually remove flashback logs to create space'.
  
  What is the best way to configure the server to DR return to normal operation?
  I did not have the flashback logs and will disable the flashback once this is rectified.
  
  This is Oracle 10.2.0.4 physical standby using Oracle Dataguard.
  
  Thank you very much!

  Hello again;

  change the flashback of the database

  Select flashback_on in the database of v$.

  Or for simply FRA

  ALTER SYSTEM SET DB_RECOVERY_FILE_DEST = "scope = both;

  Best regards

  mseberg

• After update my iPad iOS 9.2.1 to 9.3 live 2 I can't connect to the activation server and does not have the latest version of iTunes to activate

  I downloaded the update to iOS over-the-air 9.3 and installed. Setup cannot connect to the server to activate the ipad2. The message is to try again in a few minutes or connect to iTunes to activate. Yes, I have the most recent and current iTunes version, so this isn't the issue. iTunes recognizes the iPad as my ipad2, but cannot do what he done to be able to use iTunes to activate it. I have 2 iPads. iPad 2 and iPad 4th generation. iPad 4th generation downloaded on-line and updated and active and install without problem. IPad2 updated and not can not connect to the server to activate and I connect to iTunes to activate as the message says, but iTunes cannot activate because it sees my ipad2 and that's all that. Of course, I'll try again once activate WiFi tomorrow but any suggestions would be greatly appreciated.

  Thand you

  same problem with you jerryenea. This seems to happen ipad 2 only? my itunes cannot check my ipad

• Blackberry enterprise server configuration will not accept the connection.

  Original title: remote terminal BlackBerry or resource will not accept connection

  Blackberry enterprise server configuration

  H

  1. What operating system is installed on the computer?
  2. What exactly are you trying to achieve?
  3. What is the full error message received?
  Since your post looks like this, the problem is related to the server, Blackberry enterprise server, that's why I suggest you to report the issue to the links below for assistance:
  http://social.technet.Microsoft.com/forums/en-us/ocspresenceim/thread/84884b83-b8a4-4150-b395-19c133b6254d/
  http://BTSC.webapps.BlackBerry.com/BTSC/microsites/msbrowse.do?UMBrowseSelection=SG_BLACKBERRYENTERPRISESERVER_4_1
  I hope this helps!

• When opening my windows email he invites me to verify my user name and password are correct for my mail server, but will not accept the information upon entry

  Account: 'mail.luckyinloveweddings.com', server: 'mail.luckyinloveweddings.com', Protocol: POP3, server response: '-ERR failed authorization ', Port: 110, secure (SSL): no, Server error: 0x800CCC90, error number: 0x800CCC92

  This is the error message.  This problem started only yesterday.  I have since uninstalled AVG and installed Microsoft Essentials and removed/added my e-mail account.

  Hello

  1. What on the computer email client do you use?
  2. who is your provider of mail Service?
  3. don't you make changes on the computer before the show?

  4. you use Windows mail to access this email?

  If you have problems with Windows Mail, you can consult the links provided.

  Working with Windows Mail in Windows Vista
  http://Windows.Microsoft.com/en-us/Windows-Vista/working-with-Windows-Mail
  Windows Mail: Setting up an account of end-to-end
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish
   
  If you are using a different e-mail client, you can reply back with more information to help you best.

• Managed server starts do not using shell script

  Hi all

  I have configure weblogic server and 3 servers managed in it. I wrote a script to start the server. I am able to start the database/earpiece and weblogic admin server. But I'm not able to start managed server.script is as below. UCM_server1 does not start. When I click on 4, it's just showing

  From UCM_server1

  nohup: redirect stdout stderr

  .

  and so on

  I just also field path and all the numnber port

  Please suggest how to debug and fix this.

  « 2 »)

  Claire

  #

  lsnr_num ='ps - ef | grep tnslsnr | grep - v grep | AWK ' END {print NR} "

  If [$lsnr_num - gt 0]

  then echo "Database already running listener."

  else echo 'starting Infrastructure Database listener... »

  Starting from $ORACLE_HOME/bin/lsnrctl

  FI

  db_num ='ps - ef | grep pmon | grep - v grep | AWK ' END {print NR} "

  If [$db_num - gt 0]

  the echo then "database running."

  else echo ' from Oracle Database... »

  $ORACLE_HOME/bin/sqlplus "/ as sysdba" < < EOF

  #connect eu1/sys as sysdba

  startup

  EXPRESSIONS OF FOLKLORE

  #

  Sleep 10

  echo "Database Services started successfully."

  #

  FI

  ;;

  #---------------------------------------------------------------------------------------------

  « 3 »)

  ECHO "from WLS_Admin..."

  admin_num ='netstat - nl | grep '$ADMIN_PORT ' | grep - v grep | AWK ' {print NR} end "

  If [$admin_num - gt 0]

  then echo "WebLogic Admin Server running."

  else echo "."

  CD $DOMAIN_HOME/bin

  echo "start WebLogic Admin Server... »

  nohup./startWebLogic.sh > weblogic.out &

  sleep 5;

  admin_run ='grep-i 'Server started in OPERATION' weblogic.out | grep v - grep | AWK ' {print NR} end "

  While [$admin_run - eq 0]

  do

  sleep 5;

  admin_run ='grep-i 'Server started in OPERATION' weblogic.out | grep v - grep | AWK ' {print NR} end "

  fact

  FI

  ;;

  #---------------------------------------------------------------------------------------------

  « 4 »)

  ucm_num ='netstat - nl | grep '$UCM_PORT ' | grep - v grep | AWK ' {print NR} end "

  If [$ucm_num - gt 0]

  then echo "UCM_server1 already running."

  else echo "."

  CD $DOMAIN_HOME/bin

  ECHO "from UCM_server1... »

  nohup./startUCMDebugMemory1GB.sh UCM_server1 > ucm.out &

  sleep 5;

  ucm_run ='grep-i 'Server started in OPERATION' ucm.out | grep v - grep | AWK ' {print NR} end "

  While [$ucm_run - eq 0]

  do

  sleep 5;

  ucm_run ='grep-i 'Server started in OPERATION' ucm.out | grep v - grep | AWK ' {print NR} end "

  fact

  FI

  ;;

  best way to debug is to find the location of the log. Go to the location of the specified managed server and check out ucm_server.log. Check what error u get

• Configuration of e-mail of Smartphones from blackBerry - enterprise server can only - not on the server of the company

  Hello

  Can someone help me with the configuration of email? When I go to email accounts configuration page, it explans that I can activate my business account by entering my address and email activation password. I'd be happy to do it, if I had a company account, which I believe (could. wrong) is that companies are using. I'm just a regular user, do not not the phone via my company - but I can't see another option on the configuration page.

  What Miss me? is there another way I can configure e-mail?

  With respect, there are two services in the world that use carriers.

  1 BIS (Blackberry Internet Service)

  2 BES (Blackberry Enterprize Service)

  You better call your carrier that what data plan I have. BIS or BES. Once confirmed, then I'll guide more according to your quiery than how to enable e-mail

• Server Administration does not

  Hi all
  
  I installed Essbase and Studio (11.1.2.2 x 64-bit) on Windows Server 2008R2. I can't open a session at the studio but I am not able to connect to EAS... I get an error unable to connect to the Administration Server. I installed by following the Quick Deployment Guide however, I am not able to connect...
  Post deployment ran EPM Start System however not start administration server...
  
  Any help would be much appreciated as I'm stuck with it for the last two days
  
  Thanks in advance

  dave78 wrote:
  I installed by following the Quick Deployment Guide however, I am not able to connect...

  The quick deployment guide deploys on a managed server, in any case as the relational database running the boot sequence for the products is not so important.
  If you have problems with EAS, start the windows service and then go and check the logs for EAS in \user_projects\\diagnostics\logs\services

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• OIA 11.1.1.5 - IOM 11.1.1.5 integration can not see the Provisioning Server

  Hello world
  
  I'm trying to integrate the IOM and OIA, I followed the steps that appear on http://docs.oracle.com/cd/E24179_01/ doc.1111 /e23377/integratingwithoimpreferred.htm #BABBEBFC, but when I need to create the provisioning server I do not see the Oracle provisioning server.
  
  I changed all the required files and double checked what they where saved and restarted the server OIA but no change.
  
  I have deployed OIA and IOM on the same area of WL 10.3.5, they are also on Windows Server 2003.
  
  Please I will appreciate any help you can give me.
  
  Kind regards
  Camila

  Hi Alex,

  Thanks for the reply, I forgot to update the post earlier, but I managed to solve the problem.

  When I set up the integration I did all the steps of the integration Guide including the amendment of the context.xml file - iam. It's because OIA is deployed on a Weblogic managed server, so when a change is made on all the files located in the RBACX_STAGING folder, the deployment must be updated.

  Kind regards
  Camila

• The server has not completed the compliance audit of the licenses. If the server is joined to a domain, make sure that the server can connect to a domain controller.

  Hi all

  Can I confirm with expert from Microsoft, it's windows foundation server 2012 may not be the first domain controller (which means that the first AD in the forest)? It must be attached to the root of the forest as a domain controller. If I'm promoting it to be first DC in new forest, he invites you to "the server has not completed the compliance audit of the licenses. If the server is joined to a domain, make sure that the server can connect to a domain controller. If the license compliant check cannot be completed, the server will automatically close in 9 days...

  Thank you & best regards
  Andy

  Hi Andy,.

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

  Hope the helps of information.

• Watch is not on the remote server.

  I created a simple animation and it works very well on my local server, but although I have downloaded with all the files to the remote server, I do not see the animation!

  Any thoughts as to why not?

  I used the SVG as my images imported; could be the problem? As I say, it works locally but not remotely.

  http://www.emaress.co.UK

  Thank you.

  Don't worry, I did a test with a static svg image and it does not show, so I guess that svg compatibility is not implemented on the remote server.

  Back to the drawing board and

• Could not deploy composite BPM soa Server 12 c (Linux)

  I'm trying to deploy a simple BPM on SOA (12 c WebLogic) server on a LINUX machine. The SOA server appears correctly installed (green in the EM console and I can access the server soa-infra).

  
  

  I get the following strange error when you try to deploy (windows or wlst maven plugin... JDevelopper)

  
  

  Error in JDevelopper:

  [17: 10:16] sending internal deployment descriptor

  [17: 10:16] send (archive) - sca_BpmProject_rev1.0.jar

  [17: 10:17] Server, the response code = 500 HTTP response was received

  [17: 10:17] error deployment archive sca_BpmProject_rev1.0.jar to partition 'default' on the server soa_server [http://10.2.1.22:7004]

  [17: 10:17] HTTP error Code returned [500]

  [17: 10:17] Error Message from the server:

  There was a deployment of the composite on soa_server error: cannot find the Motor Service of type 'implementation.bpmn '...

  Error with the maven plugin:

  [ERROR] Cannot run com.oracle.soa.plugin:oracle goal-soa - plugin:12.1.3 - 0-0: deploy (deploy by default) on the sca_BpmProject_rev1.0.jar project

  : - > response code = 500, error: there was a deployment of the composite on soa_server error: cannot find the Motor Service of type 'implementation.bpmn '.

  .. -> [Help 1]

  Anyone have any idea on this?

  I realized what the problem was: I forgot to install the model BPM in my weblogic despite the SOA model field has been installed (which made me think that everything has been properly installed because I had my operational soa_server1)

• Essbase Rapid Deployment - 11.1.2.3 - unable to connect to the administration server

  People,

  I downloaded the files required for Essbase and installed with rapid deployment. The installation was successful, and during installation, it is only requested a deployment password.

  Now, I'm trying to connect to the server using the Essbase administration console.

  That's how I'm doing:

  Start > > Oracle EPM System > > Essbase > > Essbase Administration Service > > start the Administration Console Services

  This opens the console, however, when I try to provide the following as the connection information:

  The admin server: name my PC

  Username: admin (when configuring any username as requested)

  Password: password deployment

  I get a "cannot connect to the Administration Server.

  Oracle services seem to work very well in "Services.msc".

  I also tried to start services using "C:\Oracle\user_projects\epmsystem1\bin\startEPMServer.bat". I get this message:

  Sunday, June 22, 2014

  13:09

  From EPMServer.properties

  Apache Ant version 1.7.1 compiled on June 27, 2008

  BuildFile: C:\Oracle\EPMSystem11R1\common\config\11.1.2.0\resources\instance\sta

  RT.Xml

  Finishing EPMServer.properties

  Sunday, June 22, 2014

  13:09

  I am able to connect to Essbase Studio using this user name and password. However not to the Oracle DB.

  Any help would be appreciated. I'm a newbie when it comes to installation.

  Kind regards

  If it is a rapid deployment and web apps all work on a default port 9000 which means that when you enter the administrator of the server you must enter in the format of servername:9000

  See you soon

  John

  http://John-Goodwin.blogspot.com/