I did a restore to when my computer ran right. Several different errors now show

Similar Questions

• When a computer XP starts, the following errors occur. Can't find Mac addresses, can't find DHCP at startup. PC is not connected to a network. Why would it gives this error at startup.

  When a computer XP starts, the following errors occur. Can't find Mac addresses, can't find DHCP at startup. PC is not connected to a network.

  Why would it gives this error at startup?

  It is not a Windows problem, it happens very early in the boot process until Windows is still a part of the image.  Your computer is configured for a remote network via PXE boot and there is no this PXE server so that you get this error message.  With PXE network boot, you can start a computer without him having a hard drive, the operating system resides on another machine on the network.  When the BIOS does not find the PXE server it gives you the error message, and then it proceeds to the next start equipment, which is probably your local hard drive.  Go into the BIOS and disable the PXE boot option or move it to the bottom of the boot order so that the hard drive is set as the primary boot device.

  John

• When the computer restarts, I get the error cannot create shell notification icon please help

  When I reboot count it I get error cannot create shell notification icon can any body help me

  Thank you

  Hello

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  I suggest you update your BIOS, check with the manufacturer of the system for further assistance.

  Apart from that, I suggest you do an online virus and malware scan on the system.

  http://OneCare.live.com/site/en-us/default.htm

  If the problem started occurring recently, then I suggest you to do a system restore. See the article mentioned below.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Need to do a system restore. When the computer starts and I cannot access the BIOS menu - help please... (WinXPSP3)

  I need to change the boot order, so the installation CD starts first-I can't enter the Bios at Startup Menu.

  It's a HP Pavilion that says F1 is supposed to allow me to access the menu of the BIOS at startup.  I also tried:

  Tip There are other keys that provide access to the BIOS. They include the following:

  o F1

  o F2

  o F10

  o, CTRL + ENTER

  o ALT + ENTER

  o, CTRL + ALT + ESC

  o, CTRL + ALT + INSERT

  And kay LED does not work either.  It's Windows XP - 32 bit home.

  Service Pack 3 is installed - SpySweeper is anti-virus and using the Windows Firewall.  This computer were of Trojan horses (40) and finally the browser was re-directed.

  Thanks for any help.

  It shud be a Hp tool installedon your system with which you can edit boot options even after logging on to XP.

  Its something like HP or Credential Manager protection tools.

  Maryse Agarwal

• HP LaserJet P1102W: Print several copies of a doc when I want to print several different documents

  I just noticed a new glitch today. Always I been selection of multiple files in a given folder, then right click and select the option print from the context menu.

  Today, what did, I find my printer print continually one of the file multiple times, until I stopped just to the printer. What happened more than once.

  I don't know what has changed. I have not tinkered with the print settings, nor did I update the printer driver, or install a Microsoft Update having to do with my printer.

  All solutions?

  
  HP LaserJet p1102w

  Never mind.

  I rebooted and the problem did not appear again.

  Strange.

  MODs - can you please lock this thread?

• I think I got a virus on xp family, I did a restore of system f10 and he said: I need a windows disk < root Windows > \system32\hal.dll. disc. Where can I find it?

  my computer is not let me finish my system recovery it says windows does not start because the followingfile is missing or damaged \system32\hal.dll. of and re - install a copy of it

  Hello

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Start your computer in last good known Configuration.

  Using the last good known Configuration.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:

  If the computer cannot start in the last known good Configuration, try to start the computer in safe mode.

  Step 1:

  Start your computer in safe mode...

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Step 2:

  If the computer works fine in safe mode, restore the system to a system restore point when the computer was working fine.

  How to restore Windows XP to a previous state.

  http://support.Microsoft.com/kb/306084

  Note: Undo system restore does not work when the system restore is called safe mode.

• I did a restore and must now update my computer.

  I did a restore and must now update my computer. I t is not any Service Pack installed. When I select 'EXPRESS' I get the following text "the website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. "I can't run"DIFFICULTY"because I don't have a SP3

  Hi, Linda!

  You may need to install the service pack manually first of Service Pack 1-2-3 in the order
  try clicking on this link below to download of Service pack for XP Service Center package
  http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs
  Please come back if you need assistance
  Thank you
  Makoi

• Firfox is always loaded on my computer, but does not open. Would not open after that I did a restore (have XP).

  I did a restore (Windows XP). After that Firefox would not start. You can see the "Hourglass" for a second, but nothing happens. I tried the Mode SAFE Start and it wouldn't work. I went into the program file and tried to open with the .exe of the fie. Nothing, I don't don't want to lose my favorites by installing a new version. I have tried creating a new profile becauae I don't know if I can do it right or even if it would work.

  Would appreciate any help. Thank you. Bearcat78

  Hello Bearcat78.

  I advise that you think... a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. But it's not too difficult.

  Note: You can print these steps or consult them in another browser.

  First, save your profile by saving a copy of the profile file... See: profiles of boards - where Firefox stores your bookmarks, passwords and other user data.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

• How long it take restore iphone when connecting to the computer

  How long it take restore iphone when connecting to the computer

  Is based on the amount of data to restore. How long do we have?

  GB

• I can put up the points of restoration, but when I try to restore at this point, I get a message that says that the computer is unable to restore at this point.

  I searched faq, but most deal with how set up points and not what to do when the computer cannot be restored to a point.  This computer is 5 years old and I set a restore point every day is there a file that must be emptied?

  Some security programs prevent changes to their file and must be configured to allow the restoration of the system work.  For example, if your computer has Norton Antivirus or Norton Internet Security, you must disable Norton product Tamper Protection before running the system restore:

• When I did an update on the Dell computer I lost my list of favorites on the homepage

  When I did an update on my Dell computer I lost my list of favorites on the homepage

  CrystalBall © SEZ...

  Where are my favorites in IE9? What are the toolbars?
  http://answers.Microsoft.com/thread/313b8179-0aa6-422F-9ece-81e6f60f6736

  You will find support for Internet Explorer in this forum: http://answers.microsoft.com/en-us/ie

• I saw help for my question but I need the phone number for the microsoft support, because when my computer did an automatic high grade shut down you my computer and cannot restart windows. I don't have the disk to reinstall windows

  What can I do now, I'm lost

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• I recently did a factory reset on my computer and saved all my files on a flash drive when I load them onto my computer, they look all as internet files explore instead of dreamweaver files, please, help?

  I recently did a factory reset on my computer and saved all my files on a flash drive when I load them onto my computer, they look all as internet files explore instead of dreamweaver files, please, help?

  They probably had the IE icon because Windows automatically associate with IE html files.

  It is of no consequence for your work in Dreamweaver, but you can change this association if you wish.

  Go to control panel > default of programs > set Associations.

• BlackBerry smartphones, I've lost my browser icon when I did a restore!

  I did a restore and all of a sudden my browser has disappeared... what could have happened and where can I download it again?

  sportfanjh wrote:
  I did a restore and all of a sudden my browser has disappeared... what could have happened and where can I download it again?

  Hello...

  Have you tried options / OPTIONS ADV. / ROUTING TABLE of the HOST / click on the menu button / sign up now

  This you repush your service books...

  Let us know how you are doing...

  H.

• My Windows Vista download updates and seem to install but do not configure when the computer restarts. Clues about the problem?

  This has happened since April 12, but I'm just now "getting it." no error messages or numbers.   I saw something on NVIDIAnForce 10/100 Mbps Ethernet problem in another context?

  Hi donorann,

  ·         Did you do changes on the computer before the show?

  ·         Updates (KB numbers) you are trying to install?

  ·         The updates are installed successfully?

  View the history in Windows Update in Control Panel window, or go to installed updates:

  Open installed updates by clicking the Start button, click Control Panel, click programs, and then under programs and features, click view installed updates.

  Follow the steps in the article.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  Note: You must take the backup of the data before performing any installation of windows.

  For reference:

  You cannot install some programs or updates

  Understand the automatic Windows Update