I did a system restore and the files are still there, but I can't find the location.
I did a restore on my Windows XP system because I was not able to access my desktop because the password entry bar giving access to the Office not show up no matter how many times I rebooted the computer.
When I made the recovery of the system, he said that my files were not going to be deleted, all programs were still there, but the photos, videos and music were gone from My Documents.
So I tried to find on the C drive, I thought that maybe they had just moved somewhere else. I even went in the folder options to show hidden folders, but the files are not in one of these folders.
However I know that the files are still there, because when I look at the properties of the drive C with the right click of the mouse, it says drive C is always full, as it was before the system recovery. So this means that the files are still there but I don't know where.
I have lots of family photos and videos that I want back. These are the only things I want to get back and maybe my music files.
Any ideas how I can find these files or the folder that contains the? Perhaps through MS-DOS or something like that? I have external hard drives to copy if I find them.
Maybe this will help you:
http://support.HP.com/us-en/document/nph00268
Tags: HP Desktops
Similar Questions
-
My project disappeared from the timeline. All clips are in the screen preview, but I can't get the project to appear on the timeline.
Search in projects in smart collections.
-
I don't know what is happening, I did a system restore and it did not work, and all my icons and files I had on my monitor have gone
Try this to rebuild icons: -.
Open the command prompt as administrator and copy and paste each command and press ENTER after each command:-
- Taskkill /IM explorer.exe/f
- CD /d %userprofile%\AppData\Local
- DEL /a IconCache.db
- Shutdown /r
-
I did a system restore, and I went to do my updates, but this error occurs, could someone please?
[Error number: 0x8024400A]
The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.
Hello
1. don't you make changes on the computer before the show?
2. what Windows update you are trying to install?Method 1:
You can run the fix it and check.
The problem with Microsoft Windows Update is not working
http://support.Microsoft.com/mats/windows_update/Method 2:
Perform a clean boot and try to update windows and check.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
Method 3:
You can also try the steps in the supplied knowledge base article and check.You can not install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after you install Windows XP SP3 immediately after a clean install, or
http://support.Microsoft.com/kb/943144Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
http://support.Microsoft.com/kb/322756Method 4:
You can also follow the article mentioned below to resolve the error: 0x8024400A. -
Hello
I'm trying to restore my computer to a specific date, but I can't find the option that will allow me to go there. Help, please! Its really URGENT.
Original title: urgent
See option #1 on this page: http://cmdrkeene.com/quickly-repair-pc-problems
-
I have CS4 and updated to OS x 7.5 to 10.5 Yosemite. Applications are still there, but can not be opened. After the restart, the application displays error 6. I have the
Original key, but does not have a place to enter.
We recommend that you reinstall the applications. You can use the Cleanup tool to remove the applications and products CS4 download from here.
-
I did a system restore and now I can't connect to internet
My computer was working very slow so I did research to find out what might help him to run faster, I found that by doing a system restore might help so I tried it and after it was over and I tried online my computer does not connect and said it was a mistake and asks me if I want to send an error report but still wont let me online so I don't then went back to undo the System Restore and still unable to connect to the internet any help no matter which could offer would be appreciated thank you remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hello tashao26,
1. What is the exact error message when you try to go online?
2. what web browser you use on your computer?
If you use Internet Explorer and the error you are referring, it seems to me that Internet Explorer crashes on your computer. You can check the link below for this problem:
http://support.Microsoft.com/gp/pc_ie_intro
Also, if you have Internet Explorer 7 or later, you can check the link below:
http://support.Microsoft.com/kb/926449
Thank you
Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think. -
System Restore and the host file
How do you keep restoring the system to unblock web sites in the hosts file?
Hello
System Restore is not designed to do what you want it to do.
A system restore point contains the settings of the computer at that moment in time.
It's the idea of system restore.
http://Windows.Microsoft.com/en-pH/Windows-Vista/what-is-system-restore
"System Restore helps you restore system files from your computer to an earlier point in time. Is a way to cancel the system changes to your computer without affecting your personal files.
"These restore points contain information about registry settings and other system information that Windows uses."
See you soon.
-
I did a system restore and now I can not connect. Error code oxc004e002.
I ran the restoration of the system and now unable to connect. Error code oxc004e002 AAn arrives. McAfee also keeps poping up saying that I am not protected
Hi Rita Morgan,.
1. on what application you can not connect?
2. When you mention "sign in" mean, you are not able to boot to the desktop?
3. have you updated your McAfee security software?
Make sure that it is not expired and updated your McAfee software up-to-date.
Follow the steps below and check, if it helps.
Step 1:
Start your computer in safe mode with network and check if that helps to connect.
Step 2:
This problem can also be caused by a malware, I you have to perform a full scan in safe mode with network in order to remove the malicious software and since then, your McAfee does not protect your machine, I would have you to run a scan using the link below.
http://OneCare.live.com/site/en-us/default.htm
In addition, check out the link below and check if it is related to your issue.
Aziz Nadeem - Microsoft Support
[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
32-bit Vista, System Restore and windows update are suspended.
This problem started happening almost two months ago. When I turn off computer and windows update tells me that it is updated, I leave. Ive come back hours later to see that my computer never updated and turns off. Ive tried click on windows update to update while I was connected and it still crashes just forever. Today, I think I discovered perhaps the underlying problem. Finally, I got fed up and decided to do a system restore, after hours of research and try all kinds of solutions on these forums (none worked). So now he is suspended from the system restore. Suspicious to me that when the windows update crashes is on the screen where it says create restore point.
What can I do?
I do not want to download all that regcure, II _ I chercher search on google, seems tgtbt and I don't want to take the risk of harming my system.
can anyone help please?
Thank you very much.
Hello
You should go to the system manufacturer's website and get the latest network drivers wifi and card.
Download - SAVE - go to where you put them - right click - RUN AS ADMIN - REBOOT after each driver.
Maybe the other pilots. software and updates to the BIOS, you can get there.
Control Panel - Device Manager - double-click on a device and check the version.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlthen also make - close all regular programs
Start command - in the search box type-
at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN
Type the following commands (or you can copy and paste one at a time), each followed by pressing on enter.
ipconfig/flushdns
nbtstat-r
nbtstat - RR
netsh int Reinitialis
netsh int ip reset
netsh winsock reset
RESET
That resets your TCP/IP stack
Rob - bicycle - Mark Twain said it is good.
-
I use Windows Vista and the antivirus software Kerpersky internet on my Dell laptop. A virus 'seems have wiped my desktop and programs files and the directory of my document files, and index on my C drive and my external drive which was attached when you save.' .. that is the index of the two drives is empty shows that no file already exist...
Kerpesky worked at the time, but he could not stop the attack. However, Karpersky himself was apparently not affected, and when I run that s Karpersky it scanning readings missing files on the C drive and the external drive as being there but appears to any threat of threats...
I managed to get my office back in a configuration much earlier using a Windows roll back feature that resets the list of programs and some very old directories and older files, but I can't see the previous desktop, nor my current "desktop", or a 'my document' content etc.
When I jump into Excel and pick up the last file used, that has been saved on my desktop, it chose upward and able to be re-registered, but if I try to view a list of files via Excel or MS Word, none are found. Another problem is that my backup disk has got so touched. I am concerned to recover all my files and also not to overwrite anything on my C drive in the meantime. What are the best tools to solve this problem?
Thank you
Peter
Problem has been fixed. I had a breakthrough last night when I did a bit of research to specific directories and found that files and directories 'lost' were just 'hidden '. I used the Windows tools to display all the files and directories hidden in the C drive and HARD drive and were able to view each of them to solve my problem.
Thank you very much
Peter
-
Part of a homegroup, and shared files are still ask for a network password
Hello
I'll try to give as much information as I can so that I hope someone can help me with this problem.I'm running Windows 8 pro and my other computer has Windows 8 pro. On both systems, I am running Windows on a SSD, and I share the folders that are on a hard disk of data as well as access to an external hard drive connected to one of the computers.Both computers are part of the same homegroup. Both computers are password protected (at startup). I use one of the computers and my husband the other use it so all of us, the newspapers in our own computer via our Acct. Microsoft computers also "turn off password protected sharing" selected in advanced sharing settings. Both computers say that we are the administrator in respect of user accounts.My husband can access all my files shared from his computer, generally with no problems, but on occasion, he is invited to "Enter network password" of Windows Security. I almost always have this problem while trying to access its shared folders and the external hard drive that is connected to his computer.We have tried to share the folders on your computer in several ways:Share with homegroupShare with everyoneShare with> with total control over each of them and I get the message that precedes, or sometimes he tells my I can't access this drive. Also, one thing I forgot is that each of our computers, said that the other user has the credentials in Credential Manager.I feel like part of my problem is while the computer says I'm an administrator, I have always problems to the administrator. When I try to install new software (this happened to me with Dropbox) I had to right click on the .exe and run as administrator. I also had set my Adobe Photoshop Lightroom on run as administrator under 'Compatibility' for all work processes.I am at a loss to know what to do. I did a clean install with my Windows 8 disk to see if it was only a problem with I've originally set up the system. If anyone can help, I would be very happy. I feel like I'm missing just this thing that's right in front of me that I can't because I'm too close to the issue.Hi Candace,
I suggest to restore all security permissions, then check the issue.
Follow these steps to do so.
a. open the command prompt by pressing the Windows key + X , and then click on (Admin) command prompt.
b. typesecedit/configure /cfg %windir%\inf\defltbase.inf/db defltbase.sdb / verbose and press ENTER.
I suggest to run Homegroup troubleshooter and check for the issue. It will tell you if there is something wrong in the homegroup connection. See the link to do so.
The homegroup Windows problems
http://Windows.Microsoft.com/en-us/Windows-8/HomeGroup-problems-in-Windows
Reference:
Homegroup from start to finish
Let us know the status of the issue. We would be happy to help you.
-
Hello-
I use Windows 7 Professional and everything seems to work very well. I joined my new Transcend f25 USB (300g) to use for backups. I copied on about 20 concerts of archives and had run Windows it's first backup.
Everything seemed fine, and the available space on the disc is now about 230g, that sounds right. The problem is I see only empty folders on disk!
Now, I know with certainty that the files are there because I tried to plug the drive in an old laptop XP - bingo there was all my files! Can someone advise me? This seems to be a configuration problem, or maybe a drive error. The files were there when I added in the first place, however, is very strange!
How can I see my files? Help!
Thanks, Dave
Check the disk for errors by using this procedure.
1. open the computer by clicking the Start button, click computer.2 - Click on the drive you want to check, and then click Properties.
3. click on the Tools tab and then, under check for errors, click Find now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
To automatically repair problems with files and folders that the scan detects, select automatically fix file system errors. Otherwise, the disk check will be a problem, but not to fix them.
To perform a thorough check, select search and attempt to recover bad sectors. This analysis tries to find and repair physical errors on the disk itself, and it may take much longer to complete.
To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.
4. click on start.
Kind regards.
-
It is no longer a row of icons at the bottom right, and asked me to choose a program to use to open files
Hello and welcome to Microsoft Answers. It seems that your computer is infected with malware. The first thing you need to do is re - associate your executable files with applications.
First
Second
Right click on start > search. Type rundll32.exe in the field of the files to be searched. Choose to search for your main drive (usually C). Select the search hidden files and folder advanced features. Click on the search button to start the search. In the results list, find the associated rundll32 file C:\WINDOWS\ServicePackFiles\i386. Right-click on rundll32 to the left of the directory above and choose 'open file location '. The rundll32.exe file should be highlighted when the folder opens. Right-click on the file and choose copy. Then, in the search results list, right-click on rundll32 which corresponds to C\Windows\system32\rundll32.exe and choose "open file location". Again the file should be highlighted. Right-click on the file and choose Remove. Right click again in a free space in the folder and choose Paste. If this does not resolve your problem, you will need to get a windows OS disk and extract the file from there.
Once this problem is solved, you will need to perform several anti-malware analysis. You should start with Malwarebytes. Make sure that you update the parser before the scan.
-
After you save a file in photoshop Icant seem to call. DbLe clicking on the icon opens in Photoshop, but there is no evidence of the image. I also triedaccessing in the drop-down menu in Photoshop and once again, I can select but it never appears. It's as if it's hidden somehow.
Do you see anything in the layers panel when you open it?
You can open it in any image editor or Viewer? 2 GB is the upper limit for a psd. Maybe you should convert the format of tiff file.
Photoshop > file > Scripts > Image Processor will do that for you.
Gene
Maybe you are looking for
-
We get the same error messages three times at the start of Windows 2000 on some of our companys computers: "Tcmsvr.dll, file is missing. Computers are Tecra s1 models. What driver Toshiba is this related to?
-
SubVis computer - which is compiled by calling Vi and who are not
I have a request in which a compiled exe dynamically load a Subvi (sub-VI-A). The Subvi then statically calls a Subvi (sub-VI-B) who calls statically another Subvi (sub-VI-C)... All the SubVis are part of a source distribution is copied on the remote
-
'net.rim.device.api.math.Fixed32' not found
I left work last night, and my app works perfectly well in the SIM card. No problems. Just today, initialize the SIM card and get this: 'net.rim.device.api.math.Fixed32' not found I use Fixed32 to resize an image. It is imported successfully and no
-
We have Windows 7 with Windows Live Mail and Mozilla Firefox. We are not receive mail and when I click on send and receive and window appears and says I am offline and asks if I want to go to the line, YES/NO, I select Yes the box back again and I s
-
Block MSN send and receive files
Hello. I have the following problem. In our society is to use the msn admitted. The version is 6.0 and what is sought is to block the sending and receiving of files through this application. We realized that this version allows that this process shou