I disconnected cable PCI-GPIB (desktop disabled) to move the equipment, once reconnected and restarted Desktop, I can't connect to the instruments more (OS Windows XP)

Similar Questions

• my hp deskjet 840C is connected to my desktop, how can I connect it to my laptop computer in my network

  my HP deskjet 840C printer is connected to my desktop, how can I connect to my laptop in my network

  [Moved from Community Participation]

  Hello Stephen,

  You did mention the operating system installed in the laptop. Provide that information will help you provide better assistance.

  Basically, if your laptop and the printer are connected to the same network (or even router), you can configure and connect to this printer as a network printer in the laptop. The article I'm referring below has a tutorial on how to connect printers (Local and network), please go through the information in there and see if it helps you as well.

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows/install-printer#install-printer=Windows-7

  If you need assistance, just reply to the version of the operating system running on the laptop, and we'll be happy to help you.

  Thank you and have a nice day ahead!

• How to disable access to the cd player while windows is locked.

  Hello

  Does anyone know it's possible to disable access to the cd/dvd drive while windows is locked?

  That is, I would like to press Ctrl + alt + delete to lock my pc, then while I'm away, someone presses the eject button on my cd player and it will not eject.

  I have looked in device, properties of D: drive management, security settings, etc., but have been unable to find such a control to this day.

  Any help on this is greatly appreciated.

  Kind regards

  J

  Hi JC_226,

  This isn't the Windows feature. Can not disable access to the cd player while windows is locked. However, there is an option to disable the CD/DVD device. To do this, you can follow these steps:
  a. Click Start, click Run, type devmgmt.msc, and then click ok.
  b. in the list of objects, expand CD/DVD players.
  c. right-click on the sub element and click on disable.
  d. follow the instructions in the wizard to disable the device.

  Important: If you disable a device that is required to start the system, such as your floppy drive or CD-ROM/DVD-ROM drive, these devices will not work, and your system might not start.
   
  For more information, see disable a device

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to disable IPV6 for the LOOPBACK address in windows vista

  Hi all

  I have problems in ASP.NET when running any site due to IPV6 alias for the loopback address

  So I need to know how to disable IPV6 for the LOOPBACK address in windows vista

  Help, please

  http://www.lboro.AC.UK/it/Vista/IPv6.html

  There is a record for this difficulty to the bottom of the page above for Tunnel and loopback interfaces...

• is there a way to make the icons remain in the same places and not move when I turned off and restart my desktop computer? I like to keep the icons where I put them.

  I do a lot of important writing, and it would be so much nicer if the icons of file would be left in the same positions on the desktop, so that when I started working I don't panic, thinking that some kind an important file has been lost. Please help me understand how to set up my office to keep my icons in place, if possible. Thank you!

  Make sure the settings are as the other poster said.

  This could happen if the Explorer doesn't correctly. The positions of icons are saved at the stop.

  As an experience shutdown shut down Windows Explorer.

  • Create and position a file on the desktop.
  • Close Windows Explorer
  • Start - All Programs - Accessories - right on command prompt and choose run as administrator.
  • Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
  • Press Ctrl + Alt + Delete then Task Manager.
  • Control all processes to explore are closed. On the process tab see if Explorer is displayed.
   
  Then to restart Explorer
  • Press Ctrl + Alt + Delete and choose Task Manager
  • In the Task Manager, click the file menu and then click new task (run) and enter explorer

  Is your file in the correct position?

  General Explorer Fixs

  To see if a fix is available

  In Control Panel (and select Classic discovered in the left pane) select reports on the problems and Solutions (problem of type in the START search box), go to historical problem, right-click of your error and choose check for the Solution.

  You can also right-click and choose Details for more information. Post these details here. The name of the Module fault is important information.

  If the problem affects the control panel press Windows key + R and type wercon.

  Close the browser and start a command prompt

  • Close Windows Explorer
  • Start - All Programs - Accessories - right on command prompt and choose run as administrator.
  • Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
  • Press Ctrl + Alt + Delete then Task Manager.
  • Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.
   
  Then to restart the Explorer after trying all of the following
  • Press Ctrl + Alt + Delete and choose Task Manager
  • In the Task Manager, click the file menu and then click new task (run) and enter explorer
  Reregister the shell registry entries
   
  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
   
  regsvr32 /i shell32
  regsvr32 /i urlmon.dll
  regsvr32 RPCRT4.dll
  regsvr32 PROPSYS.dll
  regsvr32 MSCTF.dll
  regsvr32 cscui.dll
  regsvr32 rsaenh.dll
  regsvr32 timedate.cpl
  regsvr32 ATL DLL
  regsvr32 OLEACC.dll
  regsvr32 actxprxy.dll
  regsvr32 USERENV.dll
  regsvr32 msshsq.dll
  regsvr32 NaturalLanguage6.dll
  
  regsvr32 thumbcache.dll
  regsvr32 WINTRUST.dll
  regsvr32 MMDevAPI.DLL
  regsvr32 audioses.dll
  regsvr32 audioeng.dll
  regsvr32 ExplorerFrame.dll
  regsvr32 msi.dll
  regsvr32 FirewallAPI.dll
  regsvr32 netshell.dll
  regsvr32 pnidui.dll
  regsvr32 QUtil.dll
  regsvr32 c:\windows\system32\wpdshserviceobj.dll
  regsvr32 WINHTTP.dll
  regsvr32 C:\windows\system32\qagent.dll
  regsvr32 C:\windows\system32\portabledeviceapi.dll
  regsvr32 wbemprox.dll
  regsvr32 wbemsvc.dll
  regsvr32 fastprox.dll
  regsvr32 imapi2.dll
  regsvr32 wshext.dll
  regsvr32 gameux.dll
  regsvr32 msxml6.dll

  regsvr32 vbscript.dll

  regsvr32 jscript.dll
  regsvr32 wshext.dll
  regsvr32 wshom.ocx

  regsvr32 wshcon.dll

  regsvr32 scrrun.dll

  Delete folder settings
   
  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
   
  Reg delete "HKCU\Software\Classes\Local Settings\Software\Microsoft\Windows\Shell" /f
   
  Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Streams" /f

   

  Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\StuckRects2" /f
   
  Delete the thumbnail and icon Caches
   
  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

   

  del "% userprofile%\AppData\Local\IconCache.db".

   

  del "% userprofile%\AppData\Local\*.db".

   
  A boot is a way to explore
   
  It can be caused by a shell extension.
   
  The Explorer is built on addin programs called Extensions of Shell. The standard is provided by Microsoft, but programs add their own.
   
  • Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
  • Close Windows Explorer
  • Start Autoruns by right-clicking and choose run as administrator
  • Click on the menu Options - Filter Options and check hide Microsoft entries and disable include empty locations
  • Go to the Explorer tab and uncheck everything to the left.
  • Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
  • Press Ctrl + Alt + Delete and choose Task Manager.
  • Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.
  • Click the file menu and then click new task (run) and enter explorer

  and if it helps, re-enable one by one to identify the who.

• An official way to disable, disable or remove the libraries feature in windows 7?

  I'm looking for one or the official way to disable, turn off or remove the libraries feature in windows 7?

  I know not how,
  http://Windows.Microsoft.com/en-us/Windows7/products/features/libraries
  http://www.MakeUseOf.com/tag/Windows-7-libraries-%E2%80%93-and-why-you-want-them/
  http://TechNet.Microsoft.com/en-us/library/ee449413%28V=WS.10%29.aspx

  Not these please.
  http://www.mydigitallife.info/how-to-remove-and-hide-libraries-group-from-navigation-pane-of-Windows-7-Explorer/
  http://www.SevenForums.com/tutorials/61514-Library-pane-turn-off.html
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/turning-off-libraries-in-Windows-7/18d001dc-5319-440b-B29C-d348f81c929c
  http://www.howtogeek.com/HOWTO/21462/how-to-enable-or-disable-the-libraries-feature-in-Windows-7/
  http://www.askvg.com/how-to-disable-libraries-feature-in-Windows-7/
  http://www.mydigitallife.info/trick-to-open-computer-or-documents-as-default-instead-of-libraries-folder-with-Windows-Explorer-on-Windows-7/
  http://www.TechRepublic.com/blog/window-on-Windows/remove-libraries-from-Windows-Explorer-in-Windows-7/3401
  http://www.windows7hacker.com/index.php/2010/07/how-to-disable-libraries-feature-in-Windows-7/
  http://www.gHacks.NET/2011/11/07/hide-delete-or-customize-libraries-in-Windows-7/

  You left it I think.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/how-do-i-remove-libraries-Favorites-from-Windows/6a52e21a-DACF-47cc-883E-cea9c6af8b2e#footer

  If you do not trust the many lists or are you batting for the same amount of 10?

  Even if it's my favorite,

  http://www.SevenForums.com/tutorials/35627-libraries-folder-add-remove-navigation-pane.html

• Can I connect my old mac desktop computer to the mini to serve as the screen?

  I have an older desktop mac, can I connect to for the mac mini to use for the screen?

  Use the target display mode if possible, or a product such as ScreenRecycler.

  (138944)

• Can I connect using Remote Desktop to Windows 7 Pro to Windows XP Pro?

  Original title: Remote Desktop

  can I connect to a windows 7 pro is a windows xp pro?

  Yes you can, please try the following:

  1 right-click 'Computer' and select 'Properties' (or open 'Control panel' and select 'System')

  2. click on "Remote settings" in the upper left corner of the window
  3. on the "Remote" tab, select "allow connections to this computer remotely.

  4. make sure that you uncheck "Allow only the connection of computers running Office remotely with level (recommended) network authentication" as I'm sure that XP does not support this.

  I hope this helps.

  Please let me know how you go with this

  Concerning

  Chris

• my laptop has completed the automatic update of vista and after that I can't access wireless router with an ethernet cable only

  My sony vaio laptop running windows vista has completed an automatic update and after that, I can't connect to my wireless network, I can access the internet with an ethernet cable.

  It worked perfectly fine before the update, I know that there is a problem with what I had the same problem in the past. The way it's been solved previously was to restore the laptop to an earlier point before the end of the update. Unfortunately I can't do that and the laptop has been completed, wiped and there is no backup where I can go to restore.

  I know I can remove some updates but don't know what 1, me it is another way to solve the problem.

  Your help would be much appreciated.

  Thank you

  Hi Nadzarif,

  You can try the following steps and check if it helps:

  Method 1:

  Because the wireless stopped working after windows update, you can check the Sony support link and try to install the latest version of the drivers for the wireless card and check if it helps:

  Sony support

  For more information, see the article:

  Update drivers: recommended links

  Method 2:

  Updated version has a problem in the history of the update.

  Step 1:

  You can check in the history of the update for the updates that are installed recently or before the show.

  a. open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.

  (b) in the left pane, click view update history.

  c. to display more information about an update, double-click it.

  See the Windows updates are installed

  Step 2:

  Uninstall recently installed updates and install the updates one at a time to understand what update is the cause of the problem.

  For more information, see the articles:

  Remove an update

  Install Windows updates

• MAX Dosen´t detects my PCI GPIB

  Hi guys, I am currently using Windows xp sp2 and labview 8.6 adcademic there must be and interface for an instrument for school and my problem is:

  In MAX dosen't appear my PCI (keiithley provider) of KPCI - 488 A card, until my computer hardware, it seems I have alreadry installed the latest driver from keithley page and still does not appear = /, I tried refreshing, fresh installation etc... nothing worked... could someone help me please... tnx guys... xD!

  As mentioned, this device will not appear in NOR-MAX because it is NOT material. And no, you NEITHER-488. 2 driver will not work either. You must use the GPIB-488 driver (version 9.0 or 9.1 should work for you). Once installed, use the tools of 488 GPIB software on your system, as follows:

  To see if the device works properly first confirm the presence of the jury and then to test its ability to comminicate with an instrument the driver alone and then with NI-VISA:

  1. first check that the KPCI - 488 A is detected by the driver. Run the program Start-> all programs-> GPIB - 488-> diagnosis GPIB. This should confirm if the IPP is recognized or not. If this isn't the case, reinstall the pilot or the pcb.

  2. then, connect an instrument with gpib and attempt to communicate with the driver: Start-> all programs-> GPIB - 488-> TRTEST.exe (use the buttons send and Enter to test writing and reading respectively). If this fails, check your cable connection and make sure that you use the correct address for the instrument number.

  3. If it works, then you can you can try to communicate with the instrument using NI Visa Interactive Control on your system (start-> all programs-> National Instruments-> VISA-> Visa Interactive Control), you can also open it and check if your instrument is listed under the VISA i/o tab. If your device is not listed, then recheck your connections and also your passports VISA.

  To check the VISA Paassports, open the utility OR Measurement & Automation (NI Max) and click on software-> NI-VISA, go to VISA-Options tab, click on passports and ensure that the passport of NI-VISA for the GPIB is marked on.

  4. now you are ready to use LabVIEW. You can start with a simple reading GPIB and GPIB write or read visa and Visa write before moving on to complex things.

  Best regards.

• PCI-GPIB and controller movement legacy Newport Orion-CM - timeout in MAX but not MATLAB

  I kinda a weird GPIB problem which seems to be related to the legacy quirks of implementation of GPIB.  The system I use is an Orion of Newport-CM, which has a controller of electrostrictifs actuator in him as a monitor of power on separate GPIB addresses, but a physical port.  I have it connected via a<= 2m="" cable="" to="" an="" ni="" pci-gpib="" board. ="" i've="" tried="" both="" the="" 2.6="" and="" 2.2="" ni-488.2="" drivers="" and="" both="" act="" the="">

  I found that when I try to query the device through MAX, I can see a SPY OR that the first FindLstn mark 2 units, but expires (probably to try a * IDN? command, because it signals no response).  After that, if I try other commands via MAX or MATLAB, all the GPIB commands time out, so I have to power cycle the Newport before being receptive again.  I tried every permutation of the GPIB driver located in MAX without result - always the same behavior settings.

  Curiously, however, when I use the device only in MATLAB (with the instrument control toolbox), I can have some success, but with delays every now and then are not paralyze the MAX in the same way, it was.  I am able to open the device with:

  mcobj = gpib ('nor', 0, 1);

  fopen (mcobj);

  and query with:

  fprintf(mcobj,'*IDN?');

  data = fscanf (mcobj);

  and get the good * IDN? response.

  In addition, I can do writing and reads the device (with intermittent downtime... I found I need to leave at least 0.3 seconds between commands, which leads to a slow operation).

  It left me speechless.  Of course, it appears the interface GPIB works, maybe slowly, but if I'm not mistaken, the same driver should be usage of communication for MAX and MATLAB, why so MAX time so that I am able to have the operation in MATLAB?  Are there some low level which may be different that I cannot change in MAX or GPIB configuration, but is defined by MATLAB?

  Any thoughts appreciated.  Newport is as usual MOM on obsolete parts, and their job is not much help outside retailer orders GPIB (Nothing on the specifications of the bus).

  Thank you

  Scott

  Thanks for the tips.  It seems that the old Newport is just really, really slow (must be material and mid-1990 s), so he needs a good break between her send GPIB commands.  I installed the 1.7 legacy drivers, and those at least have correctly the * IDN? the device response.  Gpib MATLAB interface is quite simple you can give sufficient breaks between commands to send to the Newport, so in it, I am able to control the time between orders.

  It seems that it is just a matter of a slow device.  I know not what look like the internal FindLstn characteristics and, therefore, why the new version of MAX expires while the old ones do not, but for really old hardware that there could be GPIB read/write in the new pilot who are too fast to actually really old equipment sufficient time to respond.  Thanks again for the input.

• problem with express mini pci wireless lan card. I can't connect to internet via wifi but I can connect to the internet via cable.

  Hello! I have a problem with my card express 11 b/g/n wireless lan mini pci because I can't connect to internet via wifi but I can connect to the internet via cable. whenever I try to connect it repeat to myself that there is a problem with your wireless network card. I tried troubleshooting, uninstall and reinstall the program, but always the same result. I'm updating too but still the same thing. I use a windows 7 Professional on my Lenovo 412. can someone help me? Thank you!

  Hello

  Method 1: I suggest you to follow the instructions of the link to solve the problem of network card:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  Method 2: Troubleshoot wired and wireless in Windows network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Reference: http://forums.lenovo.com/t5/R-and-L-Series-ThinkPad-Laptops/L412-Wireless-Automatically-Disables/td-p/264447

  You can also post your question in the forum of Lenovo to get help:

  http://forums.Lenovo.com/

• How can I disable one of the menus looking desktop?. Right SWIP

  How can I disable one of the menus looking desktop?. Right SWIP

  Hi mzdbid,

  I understand that you want to change some of the search results you see featured on your iPhone. I know it's important to have your iPhone to work more efficient for you, so I'm happy to provide advice to help with this.

  See the steps on how to change the apps are included in Spotlight Suggestions here:

  Use the search on your iPhone, iPad or iPod touch - Apple Support

  Change search settings

  Go to settings > general > Spotlight search.

  From there, you can enable or disable the Suggestions of Siri and choose which applications to include in your search. For example, if you don't want to see the results of the research in your Messages app, you can deselect Messages.

  If you don't want Siri or Spotlight to suggest close places, go to settings > privacy > location Services. Then click on System Services and disable Safari & Suggestions of Spotlight. Find out where you can use the Spotlight Suggestions.

  Thank you for using communities of Apple Support, cheers!

• Add a PCI video card disable VGA integrated au245av

  I tried to add a 2nd monitor to my HP AU245AV using a PCI video card.  Unfortunately the built-in VGA port get disabled.

  I was going to add two additional monitors, but this problem has blocked me on 2.  How can I keep the integrated VGA port enabled after adding other PCI video cards.  Nothing jumped eyed me in BIOS and I see no DIP switches on the motherboard.

  mfaklis wrote:
  How can I keep the integrated VGA port enabled after adding other PCI video cards.

  You can not.  Turning off the video of the motherboard when adding a PCIe card is a 'feature '.

• OR PCIe-8233 can be connected to a desktop RT image capture?

  Hi all

  I intend to use 3 GigE cameras for my application. Also, I decided to use a desktop running under OS RT OR.  This DVR card supports the RT? According to the characteristics, the http://sine.ni.com/nips/cds/view/p/lang/en/nid/211211 , the operating system that is supported is Windows,

  However, in the section overview of the same Web page, noted that "8233 is optimized for the needs of vision of machine on the PC and real-time systems.

  Can I connect NI PCIe-8233 to my desktop and capture of CR images?

  Concerning

  Aveo

  Hi Aveo,

  This card is supported on a platform in real time.

  Suraj-

  AE, OR India