I do not see the second HDD on Qosmio G
Hi all
Yesterday I did a system recovery, but after that, I do not see my second hard drive. Every time when I started the laptop I have message about this second disk mirroring. When I bought this laptop I had two the two 60 GB hard drive and now system show me only the second local disk C there is no.
I need to change and where to see them again the two hard drive?
Hello
Could you please tell us what phone you have? Thank you
Now to your question. For me it of clear. The RAID has been configured for mirroring (RAID-1)
If one of the HARD disk fails, the disk HARD drive can be replaced and its data reconstructed from the other HARD drive which has not failed.
You can change the RAID settings and disable mirroring in the BIOS.
But after changing the RAID, you will need to reinstall the entire operating system.
PS: much useful and tip info you will find in your user manual.
Tags: Toshiba
Similar Questions
-
Qosmio G30-161: can not see the second HDD in my computer
Hello
can someone tell me, that I rebooted reboot DVD in my laptop to restore all of the windows in the normal settings
as I got when I bought the laptop.
but for some reason when I go into my computer I do not see the 2nd HDD.There is only one disk c it but not the other hard drive. I need to change the settings of smoke to see the 2nd hard drive?
Hello
Well, the Qosmio G30-161 should be delivered with two hard drives of 60 GB.
I guess you can see a single HARD disk due to the RAID settings.
The unit supports RAID technology.
I think that the RAID is on the mirror. This means that the data is duplicated on both disks.
Generally, it should be possible to disable the RAID.
Check the folder utilities Toshiba.PS: It is possible that you will lose data after changing the RAID settings. Be careful.
-
can not see the BTH003 on my Qosmio laptop bluetooth headset
can not see the BTH003 on my Qosmio laptop bluetooth headset
Hi koko,.
Welcome to the Microsoft Community Forums.
According to the description, it seems that you are facing problems that Bluetooth headphones are not detected. I'll be happy to help you with this problem.
(1) what is the exact error message / complete you receive?
(2) what operating system is installed on your computer?
(3) what is the brand and model of the Bluetooth headset?
(4) have you made changes on the computer before this problem?
I suggest you to follow the steps from the links and check if it helps.
Add a Bluetooth device to your computer
http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer
Change settings for a Bluetooth compatible device
http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device
I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.
-
Satellite L550D I do not see the "Toshiba HDD Recovery"
Hello
I was going to use the disk HARD recovery described here link: http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm when you try I don't see why the "Toshiba HDD Recovery"?
Hey Buddy,
You have installed another operating system or is still the preinstalled Windows 7 in Toshiba original?
-
Satellite A305-S6843 - recovery disk anli Does the second HDD too?
I have two TRUE separated different hard disks inside (200 GB each).
I got to a point where I have to start all over again... If I want to use the recovery disk, that I had with the laptop. but then I get into a stage where I can choose "erase the hard drive.My question is: will it erase ONLY the reader of the OS (c :))? or also in the other drive (d :))?
I have a lot of files in the second drive, I want to keep.Thanks in advance,
Ofer> Recovery disk does not erase the second HDD too?
MOM restore disk will delete all data and partition on the first HARD disk.
All the data saved on the second HARD drive are safe and will not be affected.I have Satellite Pro P300 with two hard drives and I tested it several times.
If you have important data on the first disk HARD just moving to the second HARD drive and install the OS by using Toshiba recovery image. -
Original title: Signature Collision?
I'm having hard to the installation of a second external drive. I use Windows 7 Ultimate RC. There was a WD 1 TB drive My Book already installed - healthy and works very well. The problem occurred after installing a second WD 1 TB my book reader. I followed all the instructions, pluuging the drive to a USB hub. Windows found the disk, installed drivers and reported the new drive ready for use.
Windows Explorer does not see the new drive. Devices and printers shows 2 external drives from WD. Disk Management shows as 2 drives, but the second disk is offline because of a 'Signature' Collision
Each player works very well if it's the only drive plugged in. "Eject My Book" does not work because a program (or more) are to use the player in the background (Windows or Norton).
I installed the latest firmware and I'm still having this problem. I've been emailing WD with this problem and they are running out of ideas.
Can anyone help?
Thank you
Comatose13Hello Comatose13,
There is an old article of KB in Windows XP that has been recently updated with additional measures to solve this kind of problem. The KB covers Windows XP, Windows Vista and Windows 7 with step by step methods. See if that helps.
http://support.Microsoft.com/kb/330140
Bobby
-
I have a pavilion p6130fpc and it will not see the drives.
I have a pavilion p6130fpc that will not see the drives. I tried 3 different hard drives and change the cable and port twice. I have also reset the BIOS and pressed the power button for five seconds after you disconnect without success. Someone at - it any other ideas?
Willman,
Unfortunately you are not alone. HP has sold a lot of different models with the M2N78 - motherboard. The problem is that the manufacturer of the Board of Directors (not HP) set up a controller chip NVidia which tended to overheat. Once this chip goes, ur stuck. The SATA ports are controlled by this chip.
-
Satellite A200 - 1 M 8 and the second HDD bay
Hallo, I want to install a second internal HDD to hdd2 Bay, but when I opened the Bay I noticed that it is not all connectors installed.
So, what's the point of a second drive Bay hard if there are no connectors inside?Hello
The point of this Bay is, IF you buy a model with a second equipped HARD drive then there will be a connector, but if bought a model with a SINGLE disc fitted then you just need a drive since the connector to the second HDD was not soldered on the motherboard of your model.Easy and simple. If you want to have a second drive, then you must either:
-solder a connector for the motherboard which causes your warranty and does not mean that you can use a second drive since you will need the appropriate BIOS Rom
-buy a USB - HDD and accept your situation :/That's all.
Welcome them
-
I have 3 computers backed up with their images of system on an external USB drive.
However, when you try to restore a computer using system image, Windows 7 fails to find the USB HDD.
I think it would be probably due to the fact that the WindowsImageBackup folder is probably not in the right place or a superfluous folder. Here's an example of how my disk backup has arranged record...
Root for example E: /.
-Computer #1
- WindowsImageBackup
-ComputerName #1-202348 backup 2016-05-29
-Catalogue
-SPPMetadataCache
-MediaID (file)
-Computer #2
- WindowsImageBackup
-ComputerName #2-202348 backup 2016-05-29
-Catalogue
-SPPMetadataCache
-MediaID (file)
-Computer #3
- WindowsImageBackup
-ComputerName #3-202348 backup 2016-05-29
-Catalogue
-SPPMetadataCache
-MediaID (file)
I realize that the WindowsImageBackup folder should be at the origin, so I moved this computer folder #1 a less E:\
However, restoration is unable to find it and can't even see the USB HDD.
Can anyone offer advice on what I can hurt?
Original title: restore the System Image
Thank you all for responding with your advice and suggestions but the failure has been a bit of my doing (?).
When I went to another port for the USB, everything worked fine! Simple solution, that I should have tried first - duh! :-)
My USB 3.0 4TB drive was originally on a port USB 3 (which was either missing or not recognized by my Bios) and when I changed my old disk ports USB 2, everything has worked well!
Thanks again, all...
-
I used to be able to see a combined list of my emails, texts SMS, missed calls, voice messages and anything else when I open Message folder icon on my Blackberry Curve 8330 office, but now when I open it, all I get is a blank white screen. When I hit the menu button, the menu appears without a problem and if I click on the trackball, it will open a message, but I do not see the list itself.
Also, when I go to view the folder I can access an individual folder and they come very well. The only problem is the list of the combined messages that you are supposed to get when you open the icon on the desktop (or the application menu).
Could someone help me please
First thing... do a reboot simple: with the BlackBerry device powered on, remove the battery a few seconds and then reinsert the battery to restart.
Now, that is the visible screen?
-
If I Zoom in an image appears a large black squares and I do not see the image, I use a CC 2015 Photoshop in a Mac, can anyone help me please?
There are three things to try. If this image has been opened through Adobe Camera Raw 9.0, unchecking the GPU in ACR preferences. 9.1 is up-to-date and should have corrected it.
Second: Photoshop Preferences > Performance > GPU settings advanced, tamp him drawing to this Basic Mode.
If it does not, uncheck the box "Use Graphics Processor" in Photoshop preferences until there is a fix.
I don't think that OSX allowed for graphics drivers updated by author GPU like Windows does.
-
Why can I not see the Images that I just uploaded?
Hi all! I recently installed Lightroom 3 on another computer and am unable to see the images that are imported. Any suggestions? Currently I am them see as gray boxes with no displayable picture. They do not display a broken image or missing link. Any reason why this is happenning?
You can see all the images in this catalogue on the new machine? If you can not see my second point.
HAL
-
In a new tab (+) window, I get a full screen of the Bing site, and I do not see the gear of NEW CONTROLS TAB.
I tried dragging one bookmark in this window and then had this site full-screen. But when I exit Firefox and restart it, it is by default to the Site of Bing - I HATE BING
I do not see the gear for new tab controls, and so I can't put it: 'display your top sites '.
I uninstalled Firefox and installed the latest version - I found myself with the same thing, I had - including my homepage and exactly the same problem - your help would be appreciatedWhat do you see on the page, just nothing?
Could you come back: config, filter using newtab again once and if browser.newtab.url is bold claims to be 'set of users", right click and click Reset in the menu bit
If you open a new tab, which solve this problem?
Edit: sorry for typo's fault: browser.newtab.url
-
Version 38.0.1 does not see the passwords stored in previous versions
Version 38.0.1 does not see the previously saved passwords, and urged it to re - enter and save the password. After revert you to the version saved 31.7.0 pass back too. We have more than hundreds of copies of the program and all cached passwords, users do not even know what their password. This failure is a serious problem.
Problem solved. Probably the file has been corrupted signons3.txt. I deleted the file, and the new passwords are kept. After this version of the software update and new version I've seen passwords, create a logins.json file and now everything is fine. On all other computers in the company such a problem does not arise.
-
Can not see the Forum Signature
The whole issue is that I do not see the image I created for one of my signatures. I find this strange but because it's only MY signature in this particular forum (the official Sims 3 ones) that I can't see. I see everyone, and I don't have this problem on another forum or website. However, I can see the signature when I look at the forum using my phone or another browser on my computer. There is this: the signature will appear suddenly after that I have post a photo in a real post, but as soon as I refresh the page or go to another, a large white space will be where my image is supposed to be. I asked others, and they all say that they can see it properly. I tried to reset Firefox, but it changed nothing.
There have been problems reported in Firefox with images stored on Photobucket.
Would be easier to host images with another image, hosting company.This issue seems to be caused by the default value of text/html Firefox sending accept header instead of an image request and this causes Photobucket redirect to a HTML page with the image and not the image that is requested.
Maybe you are looking for
-
When I start and use my Y460 with Windows 7 HP 64 - bit EE, I hear a ticking sound incompatible, which is not the same frequency as the blinking of the hard disk light activity. Is this a hard drive problem, a fan problem or other hardware problem? P
-
the update installation failed
I'm currentky on vista OS, I cannont install updates through update automatic or manual. I have 19 thatneed updates installed, some critics. I see on the web, that it is a common problem tree Vista but I have tried all of the suggestions I found to c
-
VN7 options 591 78 SG - No cooling thrust or defender of the dust in access fast acer
So, I was browsing the forums and I think that the black edition has a special tab you will find in the tab quick access regarding the defender of dust and cooling boost, my dilemma now is that I can not din the options said, I tried to reinstall the
-
HP Mini 110-1125NR - how to reset the bios password?
Hello. I have a HP Mini 110 1125NR and I forgot the BIOS password for it. The stop code is CNU9440K03. Any help would be greatly appreciated. Thanks in advance.
-
easyBCD allows you to create a Dual/Multi boot between Windows XP and win7
Thank you